arXiv subjects

Chengleyang Lei

Publications and source records attributed to Chengleyang Lei.

8 recordsLinked to original sources

arXiv2026

Deep Reinforcement Learning-Empowered Wireless Sensor Networking for 6G Closed-Loop Controls

Robots are increasingly deployed in remote or hazardous areas for mission-critical control tasks. Due to their limited individual capabilities, they have to rely on other field sensors to obtain the state information of targets, and also a dedicated edge information hub (EIH) to enable information exchange, sensing data analysis and control command generation. Such configuration follows a sensing-communication-computing-control (SC3) closed loop. To optimize the whole closed-loop performance, this paper minimizes the linear quadratic regulator (LQR) control cost by designing the sensor-to-EIH bandwidth allocation. Specifically, we first model the distortion noise caused by limited communication data rate based on the mutual information theory. Next, under the control policy based on the Kalman filter and LQR controller, we formulate the control process as a partially observable Markov decision process (POMDP), and develop a deep reinforcement learning (DRL)-based sensor-to-EIH bandwidth allocation scheme. The proximal policy optimization (PPO) algorithm is utilized to train the DRL agent. Simulation results are provided to show the superiority of the proposed DRL-based scheme.

cs.IT↗

arXiv2026

Orchestrating Communication, Computing, and Energy Transfer for Wireless-Powered 6G Closed-Loop Controls

Future sixth generation (6G) communications are expected to support robotic control tasks in applications such as industrial automation and emergency response, where sensors, computing units, and robots are interconnected via nervous system-like networks to form sensing-communication-computing-control (SC3) closed loops. However, the limited battery capacities of devices within these SC3 loops constrain operational duration and degrade control efficiency, particularly in remote or post-disaster scenarios. To address this challenge, wireless power transfer (WPT) can be leveraged to provide continuous energy supply for SC3 closed loops. In this paper, we investigate a wireless-powered SC3 system, where a satellite transfers energy via radio frequency (RF) signals to support the communication and computing processes of multiple SC3 closed loops. By accounting for the intricate coupling among computing, communication, and energy transfer, we propose a holistic design framework to enhance overall control performance. Specifically, we adopt the linear quadratic regulator (LQR) cost as the performance metric and formulate a sum LQR cost minimization problem. The uplink/downlink transmit power, bandwidth allocation, computing capability, communication/computing time allocation, and WPT power allocation are jointly optimized. We recast the problem into a more tractable form and develop an iterative algorithm to solve it. For the special case of a single loop, we further analyze the properties of optimal solutions in energy-limited scenarios to provide insights for practical parameter configuration. Simulation results demonstrate the performance gains of the proposed scheme.

cs.IT↗

arXiv2026

Physical Layer Security for Sensing-Communication-Computing-Control Closed Loop: A Systematic Security Perspective

In industrial automation or emergency rescue, sensors and robots work together with the help of an edge information hub (EIH) containing both communication and computing modules. Typically, the EIH collects the sensing data via the sensor-to-EIH link, processes data and then makes decisions on board before sending commands to the robot via the EIH-to-robot link. This forms a sensing-communication-computing-control (SC3) closed loop. In practice, the inherent openness of wireless links within the closed loop leads to susceptibility to eavesdropping. To this end, this paper refines the conventional physical layer security (PLS) approach with a systematic thinking to safeguard the SC3 closed loop. The closed-loop negentropy (CNE), a new metric for the performance of the whole SC3 closed loop, is maximized under the closed-loop security constraint. The transmit time, power, bandwidth of both wireless links, and the computing capability, are jointly designed. The optimization problem is non-convex. We leverage the Karush-Kuhn-Tucker (KKT) conditions and the monotonic optimization (MO) theory to derive its globally optimal solution. Simulation results show the performance gain of the proposed systematic approach, and reveal the advantage of exploiting the closed-loop structure-level PLS over the link-level or sum-link-level designs.

cs.IT↗

arXiv2024

Structured Connectivity for 6G Reflex Arc: Task-Oriented Virtual User and New Uplink-Downlink Tradeoff

To accommodate the evolving demands of unmanned operations, the future sixth-generation (6G) network will support not only communication links but also sensing-communication-computing-control ($\mathbf{SC}^3$) loops. In each $\mathbf{SC}^3$ cycle, the sensor uploads sensing data to the computing center, and the computing center calculates the control command and sends it to the actuator to take action. To maintain the task-level connections between the sensor-computing center link and the computing center-actuator link, we propose to treat the sensor and actuator as a virtual user. In this way, the two communication links of the $\mathbf{SC}^3$ loop become the uplink and downlink (UL&DL) of the virtual user. Based on the virtual user, we propose a task-oriented UL&DL optimization scheme. This scheme jointly optimizes UL&DL transmit power, time, bandwidth, and CPU frequency to minimize the control linear quadratic regulator (LQR) cost. We decouple the complex problem into a convex UL&DL bandwidth allocation problem with the closed-form solution for the optimal time allocation. Simulation results demonstrate that the proposed scheme achieves a task-level balance between the UL&DL, surpassing conventional communication schemes that optimize each link separately.

eess.SY↗

arXiv2024

Sensing-Communication-Computing-Control Closed-Loop Optimization for 6G Unmanned Robotic Systems

Rapid advancements in field robots have brought a new kind of cyber physical system (CPS)--unmanned robotic system--under the spotlight. In the upcoming sixth-generation (6G) era, these systems hold great potential to replace humans in hazardous tasks. This paper investigates an unmanned robotic system comprising a multi-functional unmanned aerial vehicle (UAV), sensors, and actuators. The UAV carries communication and computing modules, acting as an edge information hub (EIH) that transfers and processes information. During the task execution, the EIH gathers sensing data, calculates control commands, and transmits commands to actuators--leading to reflex-arc-like sensing-communication-computing-control ($\mathbf{SC}^3$) loops. Unlike existing studies that design $\mathbf{SC}^3$ loop components separately, we take each $\mathbf{SC}^3$ loop as an integrated structure and propose a goal-oriented closed-loop optimization scheme. This scheme jointly optimizes uplink and downlink (UL&DL) communication and computing within and across the $\mathbf{SC}^3$ loops to minimize the total linear quadratic regulator (LQR) cost. We derive optimal closed-form solutions for intra-loop allocation and propose an efficient iterative algorithm for inter-loop optimization. Under the condition of adequate CPU frequency availability, we derive an approximate closed-form solution for inter-loop bandwidth allocation. Simulation results demonstrate that the proposed scheme achieves a two-tier task-level balance within and across $\mathbf{SC}^3$ loops.

eess.SY↗

arXiv2024

Edge Information Hub: Orchestrating Satellites, UAVs, MEC, Sensing and Communications for 6G Closed-Loop Controls

An increasing number of field robots would be used for mission-critical tasks in remote or post-disaster areas. Due to the limited individual abilities, these robots usually require an edge information hub (EIH), with not only communication but also sensing and computing functions. Such EIH could be deployed on a flexibly-dispatched unmanned aerial vehicle (UAV). Different from traditional aerial base stations or mobile edge computing (MEC), the EIH would direct the operations of robots via sensing-communication-computing-control ($\textbf{SC}^3$) closed-loop orchestration. This paper aims to optimize the closed-loop control performance of multiple $\textbf{SC}^3$ loops, with constraints on satellite-backhaul rate, computing capability, and on-board energy. Specifically, the linear quadratic regulator (LQR) control cost is used to measure the closed-loop utility, and a sum LQR cost minimization problem is formulated to jointly optimize the splitting of sensor data and allocation of communication and computing resources. We first derive the optimal splitting ratio of sensor data, and then recast the problem to a more tractable form. An iterative algorithm is finally proposed to provide a sub-optimal solution. Simulation results demonstrate the superiority of the proposed algorithm. We also uncover the influence of $\textbf{SC}^3$ parameters on closed-loop controls, highlighting more systematic understanding.

eess.SY↗

arXiv2022

Control-Oriented Power Allocation for Integrated Satellite-UAV Networks

This letter presents a sensing-communication-computing-control (SC3) integrated satellite unmanned aerial vehicle (UAV) network, where the UAV is equipped with on-board sensors, mobile edge computing (MEC) servers, base stations and satellite communication module. Like the nervous system, this integrated network is capable of organizing multiple field robots in remote areas, so as to perform mission-critical tasks which are dangerous for human. Aiming at activating this nervous system with multiple SC3 loops, we present a control-oriented optimization problem. Different from traditional studies which mainly focused on communication metrics, we address the power allocation issue to minimize the sum linear quadratic regulator (LQR) control cost of all SC3 loops. Specifically, we show the convexity of the formulated problem and reveal the relationship between optimal transmit power and intrinsic entropy rate of different SC3 loops. For the assure-to-be-stable case, we derive a closed-form solution for ease of practical applications. After demonstrating the superiority of the control-oriented power allocation, we further highlight its difference with classic capacity-oriented water-filling method.

eess.SP↗

arXiv2021

Physical Layer Security for UAV Communications in 5G and Beyond Networks

Due to its high mobility and flexible deployment, unmanned aerial vehicle (UAV) is drawing unprecedented interest in both military and civil applications to enable agile wireless communications and provide ubiquitous connectivity. Mainly operating in an open environment, UAV communications can benefit from dominant line-of-sight links; however, it on the other hand renders the UAVs more vulnerable to malicious eavesdropping or jamming attacks. Recently, physical layer security (PLS), which exploits the inherent randomness of the wireless channels for secure communications, has been introduced to UAV systems as an important complement to the conventional cryptography-based approaches. In this paper, a comprehensive survey on the current achievements of the UAV-aided wireless communications is conducted from the PLS perspective. We first introduce the basic concepts of UAV communications including the typical static/mobile deployment scenarios, the unique characteristics of air-to-ground channels, as well as various roles that a UAV may act when PLS is concerned. Then, we introduce the widely used secrecy performance metrics and start by reviewing the secrecy performance analysis and enhancing techniques for statically deployed UAV systems, and extend the discussion to a more general scenario where the UAVs' mobility is further exploited. For both cases, respectively, we summarize the commonly adopted methodologies in the corresponding analysis and design, then describe important works in the literature in detail. Finally, potential research directions and challenges are discussed to provide an outlook for future works in the area of UAV-PLS in 5G and beyond networks.

cs.NI↗