arXiv subjects

Chengwen Zhong

Publications and source records attributed to Chengwen Zhong.

At least 37 records · Page 2Linked to original sources

arXiv2023

A conservative implicit scheme for three-dimensional steady flows of diatomic gases in all flow regimes using unstructured meshes in the physical and velocity spaces

A computationally accurate and efficient numerical method under a unified framework is crucial to various multi-scale scientific and engineering problems. So far, many numerical methods have encountered various challenges in efficiently solving multi-scale non-equilibrium flows that cover a wide range of Knudsen numbers, especially the three-dimensional hypersonic flows. In this study, a conservative implicit scheme is further presented for three-dimensional steady flows of diatomic gases in all flow regimes, where both the implicit microscopic kinetic equations based on Rykov model and the corresponding implicit macroscopic governing equations are solved synchronously. Furthermore, a simplified multi-scale numerical flux inspired by the strategy of discrete unified gas kinetic scheme (DUGKS) is proposed to relieve the limitation of grid size and time step in all flow regimes. The flux is constructed through a backward Euler difference scheme with the consideration of collision effect in the physical reconstruction of the gas distribution function on the cell interface. Meanwhile, its asymptotic preserving property in the continuum limit is analyzed. In order to pursue high computational efficiency in three-dimensional flow simulations, the unstructured discrete velocity space (DVS) and MPI parallel in DVS are adopted to further speed up the calculation. Additionally, based on numerical experiments of Apollo 6 command module, an empirical generation criterion for three-dimensional unstructured DVS is proposed. Numerical results indicate that, the present method is about one to two orders of magnitude faster than the explicit conserved DUGKS method. The present method is proved to accurately and efficiently predict aerothermodynamic properties of hypersonic rarefied gas flows.

physics.flu-dyn↗

arXiv2022

Multiple solutions of nonlinear coupled constitutive relation model and its rectification in non-equilibrium flow computation

In this study, the multiple solutions of Nonlinear Coupled Constitutive Relation (NCCR) model are firstly observed and a way for identifying the physical solution is proposed. The NCCR model proposed by Myong is constructed from the generalized hydrodynamic equations of Eu, and aims to describe rarefied flows. The NCCR model is a complicated nonlinear system. Many assumptions have been used in the schemes for solving the NCCR equations. The corresponding numerical methods may be associated with unphysical solution and instability. At the same time, it is hard to analyze the physical accuracy and stability of NCCR model due to the uncertainties in the numerical discretization. In this study, a new numerical method for solving NCCR equations is proposed and used to analyze the properties of NCCR equations. More specifically, the nonlinear equations are converted into the solutions of an objective function of a single variable. Under this formulation, the multiple solutions of the NCCR system are identified and the criteria for picking up the physical solution are proposed. Therefore, a numerical scheme for solving NCCR equations is constructed. A series of flow problems in the near continuum and low transition regimes with a large variation of Mach numbers are conducted to validate the numerical performance of proposed method and the physical accuracy of NCCR model.

physics.comp-ph↗

arXiv2022

Unified gas-kinetic scheme with simplified multi-scale numerical flux for thermodynamic non-equilibrium flow in all flow regimes

In this paper, a unified gas-kinetic scheme (UGKS) with simplified multi-scale numerical flux is proposed for the thermodynamic non-equilibrium flow simulation involving the excitation of molecular vibrational degrees of freedom in all flow regimes. The present UGKS keep the basic conservation laws of the macroscopic flow variables and the microscopic gas distribution function in a discretized space. In order to improve the efficiency of the UGKS, a simplify multi-scale numerical flux is directly constructed from the characteristic difference solution of the kinetic model equation. In addition, a new BGK-type kinetic model for diatomic gases is proposed to describe the high-temperature thermodynamic non-equilibrium effect, which is a phenomenological relaxation model with the continuous distribution modes of rotational and vibrational energies. In present model, the equilibrium distribution functions is constructed by using a multi-dimensional Hermitian expansion around the Maxwellian distribution to achieve the correct Prandtl number and proper relaxation rate of heat fluxes. Furthermore, the application of the unstructured discrete velocity space (DVS) and a simple integration error correction reduce the number of velocity mesh significantly and make the present method be a efficient tool for simulations of flows in all flow regimes. The new scheme are examined in a series of cases, such as Sod's shock tube, high non-equilibrium shock structure, hypersonic flow around a circular cylinder with Knudsen (Kn) number Kn = 0.01, and the rarefied hypersonic flow over a flat plate with a sharp leading edge. The present UGKS results agree well with the benchmark data of DSMC and the other validated methods.

physics.flu-dyn↗

arXiv2022

Investigation of nonlinear squeeze-film damping involving rarefied gas effect in micro-electro-mechanical-systems

In this paper, the nonlinear squeeze-film damping (SFD) involving rarefied gas effect in the micro-electro-mechanical-systems (MEMS) is investigated. Considering the motion of structures (beam, cantilever, and membrane) in MEMS, the dynamic response of structure will be influenced largely by the squeeze-film damping. In the traditional model, a viscous damping assumption that damping force is linear with moving velocity is used. As the nonlinear damping phenomenon is observed for a micro-structure oscillating with a high-velocity, this assumption is invalid and will generates error result for predicting the response of micro-structure. In addition, due to the small size of device and the low pressure of encapsulation, the gas in MEMS usually is rarefied gas. Therefore, to correctly predict the damping force, the rarefied gas effect must be considered. To study the nonlinear SFD phenomenon involving the rarefied gas effect, a kinetic method, namely discrete unified gas kinetic scheme (DUGKS), is introduced. And based on DUGKS, two solving methods, a traditional decoupled method (Eulerian scheme) and a coupled framework (arbitrary Lagrangian-Eulerian scheme), are adopted. With these two methods, two basic motion forms, linear (perpendicular) and tilting motions of a rigid micro-beam, are studied with forced and free oscillations.

physics.flu-dyn↗

arXiv2021

A direct relaxation process for particle methods in gas kinetic theory

The multi-scale flow mechanism is crucial for force and heat loaded on near-space and reentry vehicles, the control of spacecraft by thrusters, the propelling and cooling of MEMS, etc. Since the continuum flow and rarefied flow often exist simultaneously, the modeling and prediction for such a multi-scale flow field is very complicated. One important and efficient way of predicting the multi-scale flow is constructing numerical methods by adapting the multi-scale properties of the temporal integral solutions (or equivalent characteristic line solutions) for the model equations in the gas-kinetic theory. The model equations can be classified into FP-type and BGK-type, and the numerical methods can have deterministic form or stochastic particle form. Since these numerical methods are strictly based on model equations, they are also restricted by the model equations. The difficulty and complexity in constructing model equation that has complete asymptotic preserving property for gas mixture with non-equilibrium internal energy will prevent the further extension of these methods. Therefore, this paper addresses the question whether a multi-scale numerical method can be established not on the model equations, but directly adapts the relaxation rates of macroscopic variables such as stress and heat flux. Since the algorithm of multi-scale particle method based on BGK-type equation is clear and simple, its collision step is modified in this work, where the macroscopic variables firstly evolve according to their relaxation rates, and then the molecules that participate in inter-molecular collisions get their after-collision velocities from the after-evolution macroscopic variables. Therefore, this direct relaxation process does not depend on the model equations anymore. Finally, the validity and accuracy of the particle method with direct relaxation process are examined with five test cases.

physics.comp-ph↗

arXiv2020

An implicit kinetic inviscid flux for predicting continuum flows in all speed regimes

In this study, the kinetic inviscid flux (KIF) is improved and an implicit strategy is coupled. The recently proposed KIF is a kind of inviscid flux, whose microscopic mechanism makes it good at solving shock waves, with advantages against the shock instability phenomenon. When developing the implicit KIF, a phenomenon is noticed that the kinetic flux vector splitting (KFVS) part in boundary layers not only reduces the accuracy, but seriously reduces the Courant-Friedrichs-Lewy (CFL) number as well. As a result, in this paper, a new weight is proposed about how to combine the KFVS method well with the totally thermalized transport (TTT) method. Besides admitting the using of larger CFL numbers, this new weight brings about more accurate numerical results like pressure, friction coefficient and heat flux when solving shock waves, boundary layers and complex supersonic/hypersonic flows. In order to examine the validity, accuracy and efficiency of the present method, six numerical test cases, covering the whole speed regime, are conducted, including the hypersonic viscous flow past a cylinder, the hypersonic double-cone flow, the hypersonic double-ellipsoid flow, the laminar shock boundary layer interaction, the supersonic flow around a ramp segment and the lid-driven cavity flow. The advantages of this scheme and corresponding mechanisms are to be discussed in detail.

physics.flu-dyn↗

arXiv2020

A high order kinetic flow solver based on flux reconstruction framework

The goal of this paper is to develop a high order numerical method based on Kinetic Inviscid Flux (KIF) method and Flux Reconstruction (FR) framework. The KIF aims to find a balance between the excellent merits of Gas-Kinetic Scheme (GKS) and the lower computational costs. The idea of KIF can be viewed as an inviscid-viscous splitting version of the gas-kinetic scheme, and Shu and Ohwada have made the fundamental contribution. The combination of Totally Thermalized Transport (TTT) scheme and Kinetic Flux Vector Splitting (KFVS) method are achieved in KIF. Using a coefficient which is related to time step $δt$ and averaged collision time $τ$, KIF can adjust the weights of TTT and KFVS flux in the simulation adaptively. By doing the inviscid-viscous splitting, KIF is very suitable and easy to integrate into the existing framework. The well understood FR framework is used widely for the advantages of robustness, economical costs and compactness. The combination of KIF and FR is originated by three motivations. The first purpose is to develop a high order method based on the gas kinetic theory. The second reason is to keep the advantages of GKS. The last aim is that the designed method should be more efficient. In present work, we use the KIF method to replace the Riemann flux solver applied in the interfaces of elements. The common solution at the interface is computed according to the gas kinetic theory, which makes the combination of KIF and FR scheme more reasonable and available. The accuracy and performance of present method are validated by several numerical cases. The Taylor-Green vortex problem has been used to verify its potential to simulate turbulent flows.

physics.comp-ph↗

arXiv2020

Performance evaluation of high-order reconstruction for discrete unified gas-kinetics scheme in tracking fluid interfaces

With a noticeable increase in research centered on modeling micro fluid interfaces in the framework of mesoscopic methods, we conduct an exhaustive study of discrete unified gas-kinetics scheme (DUGKS) in handling complicated interface deformations. High-order isotropic finite-difference schemes are first utilized in DUGKS to improve its capability in tracking interfaces. The performance of third-stage third-order DUGKS where source term is incorporated has also been assessed for the first time and a series of numerical tests have been conducted to investigate their capability. The comparative analysis have revealed the reason why the performance of lattice Boltzmann method is superior to that of discrete velocity method and DUGKS in general condition from an informed perspective. The mechanism behind the performance distinction between the central scheme and upwind scheme utilized in meso-flux construction in DUGKS have also been clarified. Numerical results have shown that the employment of high-order schemes in DUGKS does have an effect on the reduction of numerical dissipation, but the overall accuracy of this method is limited by the precision of prediction of source terms on mesh interface. The capability of third-stage third-order DUGKS is severely inhibited by its intrinsic limitation of the ratio of time step to particle collision time. Among the various kinds of DUGKS employed with different reconstruction methods, the most promising scheme is the one with third-order isotropic reconstruction and upwind-based meso-flux evaluation, which is able to ensure an unique balance between efficiency and accuracy.

physics.comp-ph↗

arXiv2020

A simplified discrete unified gas kinetic scheme for incompressible flow

The discrete unified gas kinetic scheme (DUGKS) is a new finite volume (FV) scheme for continuum and rarefied flows which combines the benefits of both Lattice Boltzmann Method (LBM) and unified gas kinetic scheme (UGKS). By reconstruction of gas distribution function using particle velocity characteristic line, flux contains more detailed information of fluid flow and more concrete physical nature. In this work, a simplified DUGKS is proposed with reconstruction stage on a whole time step instead of half time step in original DUGKS. Using temporal/spatial integral Boltzmann Bhatnagar-Gross-Krook (BGK) equation, the transformed distribution function with inclusion of collision effect is constructed. The macro and mesoscopic fluxes of the cell on next time step is predicted by reconstruction of transformed distribution function at interfaces along particle velocity characteristic lines. According to the conservation law, the macroscopic variables of the cell on next time step can be updated through its macroscopic flux. Equilibrium distribution function on next time step can also be updated. Gas distribution function is updated by FV scheme through its predicted mesoscopic flux in a time step. Compared with the original DUGKS, the computational process of the proposed method is more concise because of the omission of half time step flux calculation. Numerical time step is only limited by the Courant-Friedrichs-Lewy (CFL) condition and relatively good stability has been preserved. Several test cases, including the Couette flow, lid-driven cavity flow, laminar flows over a flat plate, a circular cylinder, and an airfoil, as well as micro cavity flow cases are conducted to validate present scheme. The numerical simulation results agree well with the references' results.

physics.comp-ph↗

arXiv2020

A multi-scale kinetic inviscid flux extracted from the gas-kinetic scheme for simulating incompressible and compressible flows

A Kinetic Inviscid Flux (KIF) is proposed for simulating incompressible and compressible flows. It is constructed based on the direct modeling of multi-scale flow behaviors, which is used in the Gas-Kinetic Scheme (GKS), the Unified Gas-Kinetic Scheme (UGKS), the Discrete Unified Gas-Kinetic Scheme (DUGKS), etc.. In KIF, the discontinuities (such as the shock wave) that can not be well resolved by mesh cells are mainly solved by the Kinetic Flux Vector Splitting (KFVS) method representing the free transport mechanism (or micro-scale mechanism), while in other flow regions that are smooth, the flow behavior is solved mainly by the central-scheme-like Totally Thermalized Transport (TTT). The weights of KFVS and TTT in KIF is automatically determined by those in the theory of direct modeling. Two ways of choosing the weights in KIF are proposed, which are actually the weights adopted in the UGKS and the DUGKS, respectively. By using the test cases of Sod shock tube, rarefaction wave, the boundary layer of flat plate, the cavity flow and hypersonic flow over circular cylinder, the validity and accuracy of the present method are examined. The KIF does not suffer from the carbuncle phenomenon, and does not introduce extra numerical viscosity in smooth regions. Especially, in the case of hypersonic cylinder, it gives a quite sharp and clear density and temperature contours. The KIF can be viewed as an inviscid-viscous splitting version of the GKS. By the doing this splitting, it is easy to be used in the traditional CFD frameworks. It can also be classified as a new type in the numerical schemes based on the kinetic theory that are represented by the works in Ref. \cite{SunA} and Ref. \cite{ohwada2018a}, except the weights are determined by the weights of direct modeling.

physics.comp-ph↗

arXiv2020

A multiscale discrete velocity method for model kinetic equations

In this paper, authors focus effort on improving the conventional discrete velocity method (DVM) into a multiscale scheme in finite volume framework for gas flow in all flow regimes. Unlike the typical multiscale kinetic methods unified gas-kinetic scheme (UGKS) and discrete unified gas-kinetic scheme (DUGKS), which concentrate on the evolution of the distribution function at the cell interface, in the present scheme the flux for macroscopic variables is split into the equilibrium part and the nonequilibrium part, and the nonequilibrium flux is calculated by integrating the discrete distribution function at the cell center, which overcomes the excess numerical dissipation of the conventional DVM in the continuum flow regime. Afterwards, the macroscopic variables are finally updated by simply integrating the discrete distribution function at the cell center, or by a blend of the increments based on the macroscopic and the microscopic systems, and the multiscale property is achieved. Several test cases, involving unsteady, steady, high speed, low speed gas flows in all flow regimes, have been performed, demonstrating the good performance of the multiscale DVM from free molecule to continuum Navier-Stokes solutions and the multiscale property of the scheme is proved.

physics.comp-ph↗

arXiv2020

Simplified Unified Wave-Particle Method with Quantified Model-Competition Mechanism for Numerical Calculation of Multi-Scale Flows

A Quantified Model-Competition (QMC) mechanism for multi-scale flows is extracted from the integral (analytical) solution of the Boltzmann-BGK model equation. In the QMC mechanism, the weight of the rarefied model and the weight of the continuum (aerodynamic/hydrodynamic) model are quantified. Then, a Simplified Unified Wave-Particle method (SUWP) is constructed based the on the QMC mechanism. In the SUWP, the stochastic particle method and the continuum Navier-Stokes method are combined together. Their weights are determined by the QMC mechanism quantitatively in every discrete cells of the computational domain. The validity and accuracy of the present numerical method are examined using a series of test cases including the high non-equilibrium shock wave structure case, the unsteady Sod shock-tube case with a wide range of Kn number, the hypersonic flow around the circular cylinder from the free-molecular regime to the near continuum regime, and the viscous boundary layer case. In the construction process of the present method, an anti-dissipation effect in the continuum mechanism is also discussed.

physics.comp-ph↗

arXiv2019

Ray Effect in Rarefied Flow Simulation

Ray effect usually appears in the radiative transfer when using discrete ordinates method (DOM) in the simulations. The cause and remedy for the ray effect have been intensively investigated in the radiation community. For rarefied gas flow, the ray effect is also associated with the discrete velocity method (DVM). However, few studies have been carried out in the rarefied community. In this paper, we take a detailed investigation of the ray effect in the rarefied flow simulations. Starting from a few commonly used benchmark tests, the root of the ray effect has been analyzed theoretically and validated numerically. At the same time, the influence of the ray effect on the quality of the numerical results of rarefied flow is estimated quantitatively. After understanding the nature of the ray effect, the strategy to minimize the ray effect through the discretization of the particle velocity space is presented and applied in the numerical simulations. An optimal velocity discretization for DVM is problem dependent and can be hardly obtained in the complex flow simulations. Due to the intrinsic self-adaptation of particle velocity, the stochastic particle methods are free from the ray effect. In rarefied regimes, the particle method seems more appropriate in the capturing of highly non-equilibrium flow behavior.

physics.comp-ph↗

arXiv2019

An ALE-type discrete unified gas kinetic scheme for low-speed continuum and rarefied flow simulations with moving boundaries

In this paper, the original discrete unified gas kinetic scheme (DUGKS) is extended to arbitrary Lagrangian-Eulerian (ALE) framework for simulating the low-speed continuum and rarefied flows with moving boundaries. For ALE method, the mesh moving velocity is introduced into the Boltzmann-BGK equation. The remapping-free scheme is adopted to develop the present ALE-type DUGKS, which avoids the complex rezoning and remapping process in traditional ALE method. As in some application areas, the large discretization errors will be introduced into the simulation if the geometric conservation is not guaranteed. Three compliant approaches of the geometric conservation law (GCL) are discussed and a uniform flow test case is conducted to validate these schemes. To illustrate the performance of present ALE-type DUGKS, four test cases are carried out. Two of them are the continuum flow cases, which are the flows around the oscillating circular cylinder and the pitching NACA0012 airfoil, respectively. Others are the rarefied flow cases, one is the moving piston driven by the rarefied gas, another is the flow caused by the plate oscillating in its normal direction. The results of all test cases are in good agreement with the other numerical and/or experimental results, demonstrating the capability of present ALE-type DUGKS to cope with the moving boundary problems at different flow regimes.

physics.comp-ph↗

arXiv2019

A multi-prediction implicit scheme for steady state solutions of gas flow in all flow regimes

An implicit multiscale method with multiple macroscopic prediction for steady state solutions of gas flow in all flow regimes is presented. The method is based on the finite volume discrete velocity method (DVM) framework. At the cell interface a multiscale flux with a construction similar to discrete unified gas-kinetic scheme (DUGKS) is adopted. The idea of the macroscopic variable prediction is further developed and a multiple prediction structure is formed. A prediction scheme is constructed to give a predicted macroscopic variable based on the macroscopic residual, and the convergence is accelerated greatly in the continuum flow regime. Test cases show the present method is one order of magnitude faster than the previous implicit multiscale scheme in the continuum flow regime.

physics.comp-ph↗

arXiv2019

A conservative discrete velocity method for the ellipsoidal Fokker-Planck equation in gas-kinetic theory

A conservative discrete velocity method (DVM) is developed for the ellipsoidal Fokker-Planck (ES-FP) equation in prediction of non-equilibrium neutral gas flows in this paper. The ES-FP collision operator is solved in discrete velocity space in a concise and quick finite difference framework. The conservation problem of discrete ES-FP collision operator is solved by multiplying each term in it by extra conservative coefficients whose values are very closed to unity. Their differences to unity are in the same order of the numerical error in approximating the ES-FP operator in discrete velocity space. All the macroscopic conservative variables (mass, momentum and energy) are conserved in the present modified discrete ES-FP collision operator. Since the conservation property in discrete element of physical space is very important for numerical scheme when discontinuity and large gradient exist in flow field, a finite volume framework is adopted for the transport term of ES-FP equation. For $nD$-$3V$ ($n<3$) cases, a $nD$-quasi $nV$ reduction is specially proposed for ES-FP equation and the corresponding FP-DVM method, which can greatly reduce the computational cost. The validity and accuracy of both ES-FP equation and FP-DVM method are examined using a series of $0D$-$3V$ homogenous relaxation cases and $1D$-$3V$ shock structure cases with different $Mach$ numbers, in which $1D$-$3V$ cases are reduced to $1D$-quasi $1V$ cases. Both the predictions of $0D$-$3V$ and $1D$-$3V$ cases match well with the benchmark results such as analytical Boltzmann solution, direct full-Boltzmann numerical solution and DSMC result. Especially, the FP-DVM predictions match well with the DSMC results in the $Mach$ 8.0 shock structure case, which is in high non-equilibrium, and is a challenge case of the model Boltzmann equation and the corresponding numerical methods.

physics.comp-ph↗

arXiv2019

Unified Gas-kinetic Wave-Particle Methods II: Multiscale Simulation on Unstructured Mesh

In this paper, we present a unified gas-kinetic wave-particle (UGKWP) method on unstructured mesh for multiscale simulation of continuum and rarefied flow. Inheriting from the multicale transport in the unified gas-kinetic scheme (UGKS), the integral solution of kinetic model equation is employed in the construction of UGKWP method to model the flow physics in the cell size and time step scales. A novel wave-particle adaptive formulation is introduced in the UGKWP method to describe the flow dynamics in each control volume. The local gas evolution is constructed through the dynamical interaction of the deterministic hydrodynamic wave and the stochastic kinetic particle. Within the resolution of cell size and time step, the decomposition, interaction, and evolution of the hydrodynamic wave and the kinetic particle depend on the ratio of the time step to the local particle collision time. In the rarefied flow regime, the flow physics is mainly recovered by the discrete particles and the UGKWP method performs as a stochastic particle method. In the continuum flow regime, the flow behavior is solely followed by macroscopic variable evolution and the UGKWP method becomes a gas-kinetic hydrodynamic flow solver for the viscous and heat-conducting Navier--Stokes solutions. In different flow regimes, many numerical test cases are computed to validate the UGKWP method on unstructured mesh. The UGKWP method can get the same UGKS solutions in all Knudsen regimes without the requirement of the time step and mesh size being less than than the particle collision time and mean free path. With an automatic wave-particle decomposition, the UGKWP method becomes very efficient. For example, at Mach number 30 and Knudsen number 0.1, in comparison with UGKS several-order-of-magnitude reductions in computational cost and memory requirement have been achieved by UGKWP.

physics.comp-ph↗

arXiv2018

A simplified finite volume lattice Boltzmann method for simulations of fluid flows from laminar to turbulent regime, Part I: Numerical framework and its application to laminar flow simulation

In this paper, a finite volume lattice Boltzmann method (FVLBM) based on cell-center unstructured girds is presented and full studied to simulate the incompressible laminar flows, which is simple modified from the cell-vertex unstructured girds FVLBM proposed by Stiebler et al. [Computers & Fluids, 2006, 35(8): 814-819]. Compared with other complex flux reconstruct methods, the computational cost of present scheme is little and can achieve second-order spatial accuracy, the temporal accuracy is adjustable depending on the temporal discretization methods. Different boundary conditions are illustrated and easy implement to the complex geometries. Four cases are testified to validate the present method, including one plate driven Couette flow for accuracy test, flow in the square cavity, flow over the single circular cylinder and more complex double circular cylinders. Numerical experiments show that the present scheme can use relatively few grid cells to simulate relatively higher Reynolds number flow, steady and unsteady flows, demonstrate the good capability of the present method.

physics.comp-ph↗