arXiv subjects

Chenxi Sui

Publications and source records attributed to Chenxi Sui.

6 recordsLinked to original sources

arXiv2026

Remote epitaxy beyond polarity

Remote epitaxy through a monolayer two-dimensional material-covered substrate establishes a crystallographic registry across the van der Waals (vdW) surface that enables the epitaxial growth, lift-off and transfer of single-crystalline films. A central belief in remote epitaxy is that the substrate facilitating the phenomenon must be a material with strong ionicity, as the interatomic electrostatic potential fluctuation in covalent and metallic materials is substantially attenuated by two-dimensional materials. Here, we show remote epitaxy is possible when the substrate is a metallic or covalently bonded material and experimentally demonstrate non-polar remote homo- and heteroepitaxy across a wide range of material systems, including both metals and semiconductors. The achieved non-polar remote interactions are designed and engineered by harnessing substrate conductivity and vicinal surface step-edge density. These findings indicate that remote epitaxy is universal and applicable to ionic, metallic, and covalent materials, expanding its capabilities and stimulating a plethora of new fundamental scientific questions about the mechanism of remote epitaxy.

cond-mat.mtrl-sci↗

arXiv2025

Spectrally-selective dynamic radiative thermoregulation via phase engineering

Maintaining comfortable temperatures for buildings, humans, and devices consumes a substantial portion of global energy, underscoring the urgent need for energy-efficient thermoregulation technologies. Dynamic radiative thermal emitters that can switch between passive cooling and heating modes offer a promising solution, but most existing devices exhibit broadband optical responses, resulting in unwanted parasitic heat exchange and limited performance. Here, we introduce an elegant strategy that uses a dielectric cap to transform broadband metal-insulator transition (MIT) materials into spectrally selective dynamic emitters. This design creates a highly tunable Fabry-Perot cavity, enabling a tailored thermal emission spectrum by engineering the reflected-wave phase profile. Our Fresnel-formalism-based phasor diagram analysis reveals two key routes for realizing high spectral selectivity: a high-index dielectric cap and a low-loss metallic MIT state, which are further validated by Bayesian optimization. Following this principle, we demonstrated a wide-angle spectrally-selective thermoregulator operating in the atmospheric transparency window (8-13 um), where the thermal emittance can be electrically tuned from about 0.2 to 0.9 through reversible copper electrodeposition on a germanium cavity. Furthermore, this strategy can be extended to multispectral electrochromic windows, enabling switching between solar heating and spectrally-selective radiative cooling. Our work establishes a versatile and generalizable paradigm for spectral engineering of dynamic thermal emitters, opening opportunities in energy-efficient buildings, wearable thermal comfort, spacecraft thermoregulation, and multispectral camouflage.

physics.optics↗

arXiv2025

Epitaxial Electrodeposition of Fe with Controlled In-Plane Variants for Reversible Metal Anode in Aqueous Electrolyte

The development of reversible metal anodes is a key challenge for advancing aqueous battery technologies, particularly for scalable and safe stationary energy storage applications. Here we demonstrate a strategy to realize epitaxial electrodeposition of iron (Fe) on single-crystal copper (Cu) substrates in aqueous electrolytes. We compare the electrodeposition behavior of Fe on polycrystalline and single-crystalline Cu substrates, revealing that the latter enables highly uniform, dense, and crystallographically aligned Fe growth. Comprehensive electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) analysis confirms the formation of Fe with specific out-of-plane and in-plane orientations, including well-defined rotational variants. Our findings highlight that epitaxial electrodeposition of Fe can suppress dendritic growth and significantly enhance Coulombic efficiency during plating/stripping cycles. This approach bridges fundamental crystallography with practical electrochemical performance, providing a pathway toward high-efficiency aqueous batteries utilizing Earth-abundant materials.

cond-mat.mtrl-sci↗

arXiv2025

High-efficiency broadband active metasurfaces via reversible metal electrodeposition

Realizing active metasurfaces with substantial tunability is important for many applications but remains challenging due to difficulties in dynamically tuning light-matter interactions at subwavelength scales. Here, we introduce reversible metal electrodeposition as a versatile approach for enabling active metasurfaces with exceptional tunability across a broad bandwidth. As a proof of concept, we demonstrate a dynamic beam-steering device by performing reversible copper (Cu) electrodeposition on a reflective gradient metasurface composed of metal-insulator-metal resonators. By applying different voltages, the Cu atoms can be uniformly and reversibly electrodeposited and stripped around the resonators, effectively controlling the gap-surface plasmon resonances and steering the reflected light. This process experimentally achieved >90% diffraction efficiencies and >60% reflection efficiencies in both specular and anomalous modes, even after thousands of cycles. Moreover, these high efficiencies can be extended from the visible to the near- and mid-infrared regimes, demonstrating the broad versatility of this approach in enabling various active optical and thermal devices with different working wavelengths and bandwidths.

physics.optics↗

arXiv2021

Bio-inspired vascularized electrodes for high-performance fast-charging batteries designed by deep learning

Slow ionic transport and high voltage drop (IR drop) of homogeneous porous electrodes are the critical causes of severe performance degradation of lithium-ion (Li-ion) batteries under high charging rates. Herein, we demonstrate that a bio-inspired vascularized porous electrode can simultaneously solve these two problems by introducing low tortuous channels and graded porosity. To optimize the vasculature structural parameters, we employ artificial neural networks (ANNs) to accelerate the computation of possible structures with high accuracy. Furthermore, an inverse-design searching library is compiled to find the optimal vascular structures under different industrial fabrication and design criteria. The prototype delivers a customizable package containing optimal geometric parameters and their uncertainty and sensitivity analysis. Finally, the full-vascularized cell shows a 66% improvement of charging capacity than the traditional homogeneous cell under 3.2C current density. This research provides an innovative methodology to solve the fast-charging problem in batteries and broaden the applicability of deep learning algorithm to different scientific or engineering areas.

cond-mat.mtrl-sci↗

arXiv2018

Solar Thermochemical Water-Splitting Reaction Enhanced by Hydrogen Permeation Membrane

The low conversion rate and efficiency always weaken the performance of thermochemical water-splitting reaction. Herein, we, for the first time, conducted the thermodynamic study of a hydrogen permeable membrane (HPM) in an isothermal thermochemical water-splitting reaction driven by solar energy, which has showed a sharply enhanced conversion rate of 87.8% at 1500 oC and 10-5 atm at permeated side (versus 1.26% with oxygen permeation membrane). According to thermodynamic analysis, the first-law thermodynamic efficiency can reach as high as 59.1%. When taking solar-to-electric efficiency and vacuum pump efficiency into account (for converting separation work into solar energy), we simulated the appreciable efficiency of 3.05% at 1500 oC. The numerical model will provide guidance for the actual production of hydrogen by high temperature solar water splitting. Such novel work manifests the great significance of constructing a HPM reactor for efficient solar thermochemical water splitting, which shows a novel approach for high-temperature solar water splitting.

cond-mat.mtrl-sci↗