arXiv subjects

Chi Hou Chan

Publications and source records attributed to Chi Hou Chan.

10 recordsLinked to original sources

arXiv2026

A Frequency-Space Terahertz Transceiver Chip for Multi-Agent Communications and Spatial Awareness

Future indoor embodied-intelligence systems require scalable hardware platforms that support both high-capacity multi-agent connectivity and mutual spatial awareness. The terahertz (THz) spectrum offers abundant bandwidth and inherent spatial selectivity for integrated sensing and communication (ISAC); however, conventional phased arrays and programmable metasurfaces rely on dense beamforming networks, element-level control, or external THz illumination, making scalable multibeam operation challenging. Here, we report a fully integrated 208-258GHz 65-nm CMOS THz transceiver chip that monolithically integrates broadband front ends with heterogeneous leaky-wave metasurface (HLM) apertures within a 1.5mm by 4.9mm area. The HLM generates strongly dispersive leaky modes, enabling 75 degree frequency-controlled beam scanning with only four meta-atoms. Co-design of frequency-domain and spatial-domain mixing achieves spectrally clean frequency-to-space mapping for spatial-frequency division multiple access (SFDMA) communication. The THz chip demonstrates multi-agent simultaneous transmission and reception, two-dimensional localization, and sensing-enhanced communication, providing a scalable hardware platform for future THz embodied-intelligence networks.

physics.app-ph↗

arXiv2026

Freeform super-oscillatory optics for CMOS-integrated THz super-resolution imaging

The diffraction limit fundamentally constrains the spatial resolution of far-field imaging systems. While near-field techniques can circumvent this limit, their inherently short working distances (WD) severely restrict practical applications. Super-oscillatory lenses (SOLs) offer a far-field alternative; however, conventional SOLs are plagued by discrete operating wavelengths, low efficiencies (below 5%), and formidable trade-offs among numerical aperture, chromatic aberration, and depth of focus (DOF). Here, we introduce a nonlocal, nonlinear-curvature mechanism to design a freeform SOL that achieves ultrabroadband (0.3 to 1 THz), achromatic super-resolution focusing with an unprecedented efficiency of 44%. Operating at a 9 mm WD, the lens maintains a consistent sub-diffraction full-width at half-maximum (FWHM) of around 0.45 wavelength alongside an extended DOF of around 10 wavelengths. By integrating a compact 65-nm CMOS oscillator-radiator array, we establish an advanced imaging platform capable of resolving complex 2D and 3D sub-millimeter features (down to 0.15 mm). Readily scalable to the optical regime via two-photon lithography, this freeform SOL paradigm paves the way for next-generation, high-performance integrated photonics.

physics.optics↗

arXiv2026

An integrated super resolution THz 3D imaging system based on a linear nonlocal achromatic freeform Bessel beam lens and high power oscillator radiator array

High performance terahertz (THz) 3D imaging is critical for non-destructive evaluation. However, conventional architectures are fundamentally limited by severe chromatic aberrations, modest spatial resolution, restricted depths of focus (DOF), and the bulky nature of commercial transceivers. While metasurfaces offer a compact alternative, achieving broadband achromatic super-resolution with an extended DOF remains a formidable challenge. Here, we present a highly integrated 3D THz imaging platform that synergizes a 3D printed nonlocal freeform Bessel-beam lens with a high power, 65nm CMOS oscillator radiator array. Harnessing nonlocal interactions within the lens, we generate an achromatic super resolution Bessel beam (0.3 to 1 THz) with a subdiffraction full width at half maximum (FWHM) of 0.65λ and a robust 4.7-mm DOF. Crucially, the system overcomes conventional sidelobe limitations, enabling high-fidelity 2D imaging of intricate sub-millimeter targets (e.g., USAF 1951 charts and QR codes) alongside robust 3D volumetric imaging through highly scattering media, such as printed circuit boards. By converging standard CMOS technology with additive manufacturing, this work establishes a versatile, cost-effective paradigm for next-generation integrated THz photonics

physics.optics↗

arXiv2026

Integrated Terahertz Photonic Receiving Frontend with Link Noise Outperforming Electronics

Terahertz technology is a key enabler for sixth-generation (6G) wireless networks, yet its application is constrained by increasingly severe free-space loss at high frequencies. To efficiently retrieve weak signals at the receiving end, a compact frontend that features both a high-gain antenna and a low-noise signal-detection chain is critical. Current transistor-based THz electronic frontends face significant challenges in meeting these demands because both on-chip antenna efficiency and transistor noise performance degrade rapidly when approaching their cut-off frequencies. Photonic technology provides an alternative solution to circumvent the transistor bandwidth limit, yet most microwave photonic links to date exhibit noise performance substantially worse than state-of-the-art electronics. Here, we demonstrate low-noise integrated THz photonic frontends that deliver undegraded link noise performance across three major THz windows from 140 to 450 GHz, and outperform electronic frontends in the upper two windows. We achieve this through co-design of high-gain on-chip THz antenna array and broadband THz-optic modulator on a single thin-film lithium niobate (TFLN) chip, leading to distributed reception of free-space THz signals and continuous coherent build-up of the THz-optic conversion process with unprecedented efficiency. Combined with an efficient heterodyne detection chain, our integrated frontends exhibit effective isotropic noise figures of 13.6 and 16.2 dB at 250 and 450 GHz, respectively, both setting new benchmarks in their respective bands. We further demonstrate 6G-oriented multi-link communication up to 20 Git/s. Our integrated frontends represent a significant step towards compact, cost-effective and energy-efficient THz wireless systems in 6G and beyond.

physics.optics↗

arXiv2025

Inverse design of 3D-printable metalenses with complementary dispersion for terahertz imaging

This study formulates a volumetric inverse-design methodology to generate a pair of complementary focusing metalenses for terahertz imaging: the two lenses exhibit equal and opposite shifts in focal length with frequency. An asymmetry arises, where we find a focal length that decreases with frequency to be more challenging to achieve (without material dispersion) given fabrication constraints, but it is still possible. We employ topology optimization, coupled with manufacturing constraints, to explore fully freeform designs compatible with 3D printing. Formulating an optimization problem that quantifies the goal of maximal complementary focal shifts, while remaining differentiable and tractable, requires a carefully selected sequence of constraints and approximations.

physics.optics↗

arXiv2024

Monolithic lithium niobate photonic chip for efficient terahertz-optic modulation and terahertz generation

The terahertz (THz) frequency range, bridging the gap between microwave and infrared frequencies, presents unparalleled opportunities for advanced imaging, sensing, communications, and spectroscopy applications. Terahertz photonics, in analogy with microwave photonics, is a promising solution to address the critical challenges in THz technologies through optical methods. Despite its vast potential, key technical challenges remain in effectively interfacing THz signals with the optical domain, especially THz-optic modulation and optical generation of THz waves. Here, we address these challenges using a monolithic integrated photonic chip designed to support efficient bidirectional interaction between THz and optical waves. Leveraging the significant second-order optical nonlinearity and strong optical and THz confinement in a thin-film lithium niobate on quartz platform, the chip supports both efficient THz-optic modulation and continuous THz wave generation at up to 500 GHz. The THz-optic modulator features a radio frequency (RF) half-wave voltage of 8V at 500 GHz, representing more than an order of magnitude reduction in modulation power consumption from previous works. The measured continuous wave THz generation efficiency of 4.8*10-6 /W at 500 GHz also marks a tenfold improvement over existing tunable THz generation devices based on lithium niobate. We further leverage the coherent nature of the optical THz generation process and mature optical modulation techniques to realize high-speed electro-THz modulation at frequencies up to 35 GHz. The chip-scale THz-photonic platform paves the way for more compact, efficient, and cost-effective THz systems with potential applications in THz communications, remote sensing, and spectroscopy.

physics.optics↗

arXiv2022

Spot Focusing Coma Correction by Linearly Polarized Dual-Transmitarray Antenna in the Terahertz Region

Focus scanning is critically important in many terahertz (THz) imaging and sensing applications. A traditional single focusing transmitarray can achieve a good focus when the source is on-axis but moving the source off-axis produces a significant aberration. This paper presents a novel approach to reducing coma in off-axis scanning in the THz region. Here, a dual transmitarray solution is proposed, in which a transmitarray with an optimized phase profile is placed behind a regular phase profile transmitarray. A linearly polarized, dual-transmitarray antenna was fabricated for validation, and the focusing performances were experimentally characterized. The measured results are in good agreement with the theoretical ones. The generated spot of the dual-transmitarray antenna remains focused on an angle up to 50deg, with a -3 dB spot size of less than 4 mm at 290 GHz. The measured near-field sidelobes are all below -10 dB within the whole scanning range.

physics.app-ph↗

arXiv2022

Systematic Investigation of Millimeter-Wave Optic Modulation Performance in Thin-Film Lithium Niobate

Millimeter-wave (mmWave) band (30 - 300 GHz) is an emerging spectrum range for wireless communication, short-range radar and sensor applications. mmWave-optic modulators that could efficiently convert mmWave signals into optical domain are crucial components for long-haul transmission of mmWave signals through optical networks. At these ultrahigh frequencies, however, the modulation performances are highly sensitive to the transmission line loss as well as the velocity- and impedance-matching conditions, while precise measurements and modeling of these parameters are often non-trivial. Here we present a systematic investigation of the mmWave-optic modulation performances of thin-film lithium niobate modulators through theoretical modeling, electrical verifications and electro-optic measurements at frequencies up to 325 GHz. Based on our experimentally verified model, we demonstrate thin-film lithium niobate mmWave-optic modulators with a measured 3-dB electro-optic bandwidth of 170 GHz and a 6-dB bandwidth of 295 GHz. The device also shows a low RF half-wave voltage of 7.3 V measured at an ultrahigh modulation frequency of 250 GHz. This work provides a comprehensive guideline for the design and characterization of mmWave-optic modulators and paves the way toward future integrated mmWave photonic systems for beyond-5G communication and radar applications.

physics.optics↗

arXiv2022

Holographic Amplitude-Modulated (AM) Leaky-Wave Antennas for Near-Field and Far-Field Applications

Amplitude-modulated (AM) leaky-wave antenna (LWA), a concept following amplitude modulation technique from classical communications theory, is a promising structure that enables transforming traveling wave into the radiating wave. In this paper, we provide a different perspective based on the classical holographic theory to gain insight into the physical mechanism of AM LWA and design novel LWAs. In analogy to the classical optical Gabor hologram, we demonstrate that only the amplitude variation of the traveling wave is needed to record both the amplitude and phase information of the object wave. The consistency between the holography theory and previous spatial spectrum approach for explaining AM LWA operating mechanism is also demonstrated. For validation purpose, two novel millimeter-wave (mmW) holographic AM LWAs based on the substrate integrated inset dielectric waveguide (IDW) are designed. The first one is for far-field high-gain applications while the second is for near-field focusing (NFF) applications. Both simulated and measured results demonstrate the effectiveness of the AM holography theory for AM LWAs analysis and design.

physics.app-ph↗

arXiv2012

Space-coiling metamaterials with double negativity and conical dispersion

Metamaterials are effectively homogeneous materials that display extraordinary dispersion. Negative index metamaterials, zero index metamaterials and extremely anisotropic metamaterials are just a few examples. Instead of using locally resonating elements that may cause undesirable absorption, there are huge efforts to seek alternative routes to obtain these unusual properties. Here, we experimentally demonstrate an alternative approach for constructing metamaterials with extreme dispersion by simply coiling up space with curled channels. Such a geometric approach has the advantage that the ratio between the wavelength and the lattice constant in achieving a negative or zero index is easily tunable. It allows us to construct for the first time an acoustic metamaterial with conical dispersion, leading to a clear demonstration of negative refraction from an acoustic metamaterial with airborne sound. We also design and realize a double-negative metamaterial for microwaves under the same principle.

cond-mat.mtrl-sci↗