arXiv subjects

Chi Jiang

Publications and source records attributed to Chi Jiang.

7 recordsLinked to original sources

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

Broadband microwave time-frequency analysis via stabilized period-one oscillation and recirculating frequency shifting with shared fiber loop

To address the need for time-frequency analysis (TFA) of broadband microwave signals and to overcome the reliance of existing schemes on large-bandwidth swept microwave sources, we propose a broadband microwave signal TFA approach based on stabilized period-one (P1) oscillation and recirculating frequency shifting (RFS). By employing a feedback loop, a stable swept optical signal is generated from the stabilized P1 oscillation of a semiconductor laser, and its sweep bandwidth is further extended by an RFS loop to achieve multi-fold bandwidth expansion. For system compactness, the feedback loop and RFS loop share a common long fiber. The combined operation produces a broadband swept optical signal, which, through stimulated Brillouin scattering-based frequency-to-time mapping, enables TFA and frequency measurement of broadband microwave signals. Experimental results demonstrate an instantaneous analysis bandwidth of up to 57 GHz, a frequency resolution of 60 MHz, and a maximum mean absolute frequency measurement error of 38.16 MHz.

physics.optics↗

arXiv2026

Dynamic Dispersion Accumulation in Fiber Loops for Realizing Record-High Frequency Resolution or Ultra-Low Signal Sampling Rate in Dispersion-Based Photonics-Assisted Wideband Microwave Measurement Systems

Dispersion-based photonics-assisted microwave measurement systems provide immense potential for real-time analysis of wideband and dynamic signals. However, they face two critical challenges: a difficulty in achieving high frequency resolution over a wideband analysis bandwidth, and a reliance on large-bandwidth-and-high-sampling-rate oscilloscopes to capture the resulting ultra-narrow pulses. We introduce a dynamic dispersion accumulation technique to overcome these limitations. By circulating the optical signal in fiber loops containing a dispersion-compensating fiber, we achieve a high accumulated dispersion of -215700 ps/nm. This high dispersion relaxes the required chirp rate of the chirped optical signal, enabling two distinct advantages: When the analysis bandwidth is fixed, a lower chirp rate enables a longer temporal period, yielding a record-high frequency resolution of 27.9 MHz; When the temporal period is fixed, a lower chirp rate enables a smaller bandwidth, generating a wider pulse and thus relaxing pulse sampling requirements at the expense of analysis bandwidth. This sacrifice in analysis bandwidth can be compensated by a duty-cycle-enabling technique, which holds the potential to extend the analysis bandwidth beyond 100 GHz. This work breaks the performance and hardware limitations in dispersion-based systems, paving the way for high frequency resolution, wideband microwave measurement systems that are both real-time and cost-effective.

physics.optics↗

arXiv2025

Advanced microwave photonic waveform editing: enabling the evolution of radar systems into joint radar and spectrum sensing systems

In response to the urgent demand for the development of future radar application platforms from single radar functionality towards integrated multi-functional systems, we show an advanced microwave photonic waveform editing method that enables the editing of arbitrary radar waveforms, equipping them with the capability to perform spectrum sensing. This, in turn, expands single-function radar systems into joint radar and spectrum sensing systems. We theoretically define and calculate the accumulation function of an arbitrary waveform after passing through a specific dispersive medium, and utilize this accumulation function to further design a corresponding binary sequence for editing the waveform. After editing, the accumulation function of the edited waveform approximates that of a linearly frequency-modulated signal matching the specific dispersive medium. Thus, the edited waveform can be compressed into a narrow pulse after passing through the dispersive medium, realizing the frequency-to-time mapping for achieving frequency measurement or time-frequency analysis. The concept is verified by a simulation and an experiment. Using a dispersion compensating fiber with a total dispersion of -6817 ps/nm, arbitrary waveforms, including a 7-bit Barker phase-coded waveform, a linearly frequency-modulated waveform, a nonlinearly frequency-modulated waveform, and a waveform with an "E" time-frequency diagram, are edited and further used for microwave frequency measurement and time-frequency analysis in an ultra-wide bandwidth of 36.8 GHz. The temporal resolution and frequency resolution are 2 ns and 0.86 GHz, respectively.

physics.optics↗

arXiv2025

Zero-shot Autonomous Microscopy for Scalable and Intelligent Characterization of 2D Materials

Characterization of atomic-scale materials traditionally requires human experts with months to years of specialized training. Even for trained human operators, accurate and reliable characterization remains challenging when examining newly discovered materials such as two-dimensional (2D) structures. This bottleneck drives demand for fully autonomous experimentation systems capable of comprehending research objectives without requiring large training datasets. In this work, we present ATOMIC (Autonomous Technology for Optical Microscopy & Intelligent Characterization), an end-to-end framework that integrates foundation models to enable fully autonomous, zero-shot characterization of 2D materials. Our system integrates the vision foundation model (i.e., Segment Anything Model), large language models (i.e., ChatGPT), unsupervised clustering, and topological analysis to automate microscope control, sample scanning, image segmentation, and intelligent analysis through prompt engineering, eliminating the need for additional training. When analyzing typical MoS2 samples, our approach achieves 99.7% segmentation accuracy for single layer identification, which is equivalent to that of human experts. In addition, the integrated model is able to detect grain boundary slits that are challenging to identify with human eyes. Furthermore, the system retains robust accuracy despite variable conditions including defocus, color temperature fluctuations, and exposure variations. It is applicable to a broad spectrum of common 2D materials-including graphene, MoS2, WSe2, SnSe-regardless of whether they were fabricated via chemical vapor deposition or mechanical exfoliation. This work represents the implementation of foundation models to achieve autonomous analysis, establishing a scalable and data-efficient characterization paradigm that fundamentally transforms the approach to nanoscale materials research.

cond-mat.mtrl-sci↗

arXiv2024

Microwave photonic frequency measurement and time-frequency analysis: Unlocking bandwidths over hundreds of GHz with a 10-nanosecond temporal resolution

Fast and broadband spectrum sensing is an essential component in cognitive radio systems, intelligent transportation systems, electronic warfare systems, etc. However, traditional electronic-based solutions have a trade-off among the analysis bandwidth, temporal resolution, and real-time performance. In comparison, microwave photonic solutions can overcome the trade-off at the cost of frequency accuracy and resolution. Nevertheless, the reported microwave photonic solutions suffer from a very poor frequency resolution and impose extremely high requirements on hardware when the analysis bandwidth is close to or greater than 100 GHz. Here, we show a microwave photonic frequency measurement and time-frequency analysis method, which is implemented by dispersion-based frequency-to-time mapping and assisted by a specially designed V-shape linearly frequency-modulated signal and a duty-cycle-enabling technique. Compared with the reported microwave photonic solutions, the hardware requirements are greatly reduced when achieving similar performance conditions. Using a total dispersion of -6817 ps/nm and a V-shape linearly frequency-modulated signal with a bandwidth of 31.6 GHz and a duty cycle of 1/4, we achieve an ambiguity-free analysis bandwidth of 252.8 GHz, a corresponding temporal resolution of 13.75 ns and a frequency resolution of 1.1 GHz. The temporal resolution can be improved to 6.875 ns when the duty cycle is changed to 1/2, while the analysis bandwidth in this case is 126.4 GHz.

physics.optics↗

arXiv2024

A microwave photonic prototype for concurrent radar detection and spectrum sensing over an 8 to 40 GHz bandwidth

In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz. The IF LFM signal is converted to the optical domain via an intensity modulator and then filtered by a fiber Bragg grating (FBG) to generate only two 2nd-order optical LFM sidebands. In radar detection, the two optical LFM sidebands beat with each other to generate a frequency-and-bandwidth-quadrupled LFM signal, which is used for ranging, radial velocity measurement, and imaging. By changing the center frequency of the IF LFM signal, the radar function can be operated within 8 to 40 GHz. In spectrum sensing, one 2nd-order optical LFM sideband is selected by another FBG, which then works in conjunction with the stimulated Brillouin scattering gain spectrum to map the frequency of the signal under test to time with an instantaneous measurement bandwidth of 2 GHz. By using a frequency shift module to adjust the pump frequency, the frequency measurement range can be adjusted from 0 to 40 GHz. The prototype is comprehensively studied and tested, which is capable of achieving a range resolution of 3.75 cm, a range error of less than $\pm$ 2 cm, a radial velocity error within $\pm$ 1 cm/s, delivering clear imaging of multiple small targets, and maintaining a frequency measurement error of less than $\pm$ 7 MHz and a frequency resolution of better than 20 MHz.

physics.optics↗