Searcharxiv⌕ Search

arXiv subjects

Chiara Aimè

Publications and source records attributed to Chiara Aimè.

7 recordsLinked to original sources

Application of LHC Gas Recuperation Systems for Methane Emission Control in Livestock Housing

The CH4rLiE (CH4 Livestock Emission) project investigates the technical feasibility of adapting gas recovery systems from high-energy physics to mitigate methane (CH4) emissions in livestock housing. This work presents a proof-of-principle based on the adaptation of CERN's gas recuperation systems for the capture of CH4 at low concentrations. A laboratory-scale prototype was developed to evaluate the performance of various adsorbent materials under realistic conditions, including multi-stage humidity removal and pressurized gas flows. Experimental results obtained with the prototype led to the selection of commercial Z5 zeolite as the primary adsorbent due to its high adsorption capacity and stable regeneration performance through Vacuum Swing Adsorption cycles. The study demonstrates the feasibility of CH4 capture at concentrations down to 0.1%. Furthermore, it was observed that increasing the CH4 partial pressure enhances the adsorption capacity, with tests conducted up to approximately 5 bar. To bridge the gap between laboratory conditions and the representative 10-100 ppm levels found in dairy barn environments, a negative exponential extrapolation was applied to the experimental data. This allowed for the modeling of the adsorption behavior in the ultra-low concentration regime. These results validate the operational principle and provide the necessary parameters for the design of a full-scale system for field installation.

physics.ins-det↗

Capturing methane in a barn environment: the CH4 Livestock Emission (CH4rLiE) project

The CH4 Livestock Emission (CH4rLiE) project explores the development of a prototype system for capturing methane emissions in barn environments, offering an alternative approach to mitigating greenhouse gas emissions from livestock farming. Methane (CH4), with a global warming potential significantly higher than CO2 (GWP100 = 27), accounts for ~23% of anthropogenic climate impact. In 2021, The Assessment Report 6 of Intergovernmental Panel on Climate Change quantified CH4 livestock emissions in 123 Mt/yr, which, together with substantial N2O and CO2 emissions, contributed with a 12% to global emissions. Unlike strategies focused on altering animal feed, CH4rLiE investigates post-emission capture using porous materials, such as zeolites, to adsorb methane from barn air. The project draws on CERN's experience with gas recovery systems for particle detectors, adapting similar technologies to agricultural settings. Preliminary estimates, based on measured CH4 concentrations (~20 mg/m3) and partial air filtration in a 250-animal barn, suggest a low but detectable recovery potential, subject to validation through simulation and in-situ testing. Prototype development considers the potential for energy-efficient operation - possibly through pressure swing regeneration - and compatibility with existing ventilation infrastructure, though these aspects remain under evaluation. If methane concentrations in barns prove too diluted, the system may be better suited for environments with higher gas levels, such as pigsties or landfills. NH3 capture for fertilizer production is planned as a future enhancement. CH4rLiE aims to assess the feasibility of emission recovery in livestock settings without affecting animal welfare, contributing to sustainable farming practices, resource efficiency, and circular bioeconomy goals.

physics.ins-det↗

Towards a Muon Collider

A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.

physics.acc-ph↗

Simulated Detector Performance at the Muon Collider

In this paper we report on the current status of studies on the expected performance for a detector designed to operate in a muon collider environment. Beam-induced backgrounds (BIB) represent the main challenge in the design of the detector and the event reconstruction algorithms. The current detector design aims to show that satisfactory performance can be achieved, while further optimizations are expected to significantly improve the overall performance. We present the characterization of the expected beam-induced background, describe the detector design and software used for detailed event simulations taking into account BIB effects. The expected performance of charged-particle reconstruction, jets, electrons, photons and muons is discussed, including an initial study on heavy-flavor jet tagging. A simple method to measure the delivered luminosity is also described. Overall, the proposed design and reconstruction algorithms can successfully reconstruct the high transverse-momentum objects needed to carry out a broad physics program.

hep-ex↗

Muon Collider Physics Summary

The perspective of designing muon colliders with high energy and luminosity, which is being investigated by the International Muon Collider Collaboration, has triggered a growing interest in their physics reach. We present a concise summary of the muon colliders potential to explore new physics, leveraging on the unique possibility of combining high available energy with very precise measurements.

hep-ph↗

The physics case of a 3 TeV muon collider stage

In the path towards a muon collider with center of mass energy of 10 TeV or more, a stage at 3 TeV emerges as an appealing option. Reviewing the physics potential of such muon collider is the main purpose of this document. In order to outline the progression of the physics performances across the stages, a few sensitivity projections for higher energy are also presented. There are many opportunities for probing new physics at a 3 TeV muon collider. Some of them are in common with the extensively documented physics case of the CLIC 3 TeV energy stage, and include measuring the Higgs trilinear coupling and testing the possible composite nature of the Higgs boson and of the top quark at the 20 TeV scale. Other opportunities are unique of a 3 TeV muon collider, and stem from the fact that muons are collided rather than electrons. This is exemplified by studying the potential to explore the microscopic origin of the current $g$-2 and $B$-physics anomalies, which are both related with muons.

hep-ph↗

Promising Technologies and R&D Directions for the Future Muon Collider Detectors

Among the post-LHC generation of particle accelerators, the muon collider represents a unique machine with capability to provide very high energy leptonic collisions and to open the path to a vast and mostly unexplored physics programme. However, on the experimental side, such great physics potential is accompanied by unprecedented technological challenges, due to the fact that muons are unstable particles. Their decay products interact with the machine elements and produce an intense flux of background particles that eventually reach the detector and may degrade its performance. In this paper, we present technologies that have a potential to match the challenging specifications of a muon collider detector and outline a path forward for the future R&D efforts.

physics.ins-det↗