arXiv subjects

Chongjun Ouyang

Publications and source records attributed to Chongjun Ouyang.

At least 37 records · Page 2Linked to original sources

arXiv2026

Modeling and Analysis for Joint Design of Communication and Control

A unified analytical framework for joint design of communication and control (JDCC) is proposed. Within this framework, communication transmission delay and steady-state control variance are derived as the two fundamental JDCC performance metrics. The Pareto boundary is then established to characterize the optimal communication-control trade-off in JDCC systems. To further obtain closed-form expressions, their performance regions are derived under maximum-ratio transmission (MRT) and zero-forcing (ZF) beamforming. For system reliability evaluation, the communication-only and control-only outage probabilities are first derived. Based on these, the JDCC outage probability is defined to quantify the probability that the communication-delay and control-error requirements cannot be simultaneously satisfied. Its analytical expressions are then derived under both MRT and ZF schemes. Finally, numerical results validate the theoretical results and reveal that: (1) the Pareto boundary characterizes the trade-off frontier and performance limit of JDCC systems and (2) the JDCC reliability is jointly determined by the uplink-downlink closed-loop control and its coupling with communication.

cs.IT↗

arXiv2026

On the Performance of Physical Layer Security for Continuous-Aperture Array (CAPA) Systems

A continuous-aperture array (CAPA)-based secure transmission framework is proposed to enhance physical layer security. Continuous current distributions, or beamformers, are designed to maximize the secrecy transmission rate under a power constraint and to minimize the required transmission power for achieving a specific target secrecy rate. On this basis, the fundamental secrecy performance limits achieved by CAPAs are analyzed by deriving closed-form expressions for the maximum secrecy rate (MSR) and minimum required power (MRP), along with the corresponding optimal current distributions. To provide further insights, asymptotic analyses are performed for the MSR and MRP, which reveals that i) for the MSR, the optimal current distribution simplifies to maximal ratio transmission (MRT) beamforming in the low-SNR regime and to zero-forcing (ZF) beamforming in the high-SNR regime; ii) for the MRP, the optimal current distribution simplifies to ZF beamforming in the high-SNR regime. The derived results are specialized to the typical array structures, e.g., planar CAPAs and planar spatially discrete arrays (SPDAs). The rate and power scaling laws are further analyzed by assuming an infinitely large CAPA. Numerical results demonstrate that: i) the proposed secure continuous beamforming design outperforms MRT and ZF beamforming in terms of both achievable secrecy rate and power efficiency; ii) CAPAs achieve superior secrecy performance compared to conventional SPDAs.

cs.IT↗

arXiv2026

Low-complexity tuning of pinching-antenna systems for integrated sensing and communication

Pinching antenna systems (PASSs) can dynamically adapt their transmit and receive arrays for sensing and communication in wireless systems. This work explores the potential of PASSs for integrated sensing and communication (ISAC) by proposing a novel PASS-aided ISAC design, in which pinching locations are adaptively adjusted to enable simultaneous sensing and data transmission with minimal interference. The proposed design introduces a bi-partitioning strategy that allocates sensing power and tunes pinching locations with remarkably low computational complexity, allowing dynamic PASS tuning at high update rates. Numerical results demonstrate that the proposed approach achieves a significantly larger sensing-communication rate region compared to baseline designs at no noticeable cost.

cs.IT↗

arXiv2026

On the Secrecy Performance of Continuous-Aperture Arrays Over Fading Channels

The secrecy performance of continuous-aperture array (CAPA)-based wiretap channels in terms of secrecy rate and secrecy outage probability (SOP) is analyzed. First, the system models of CAPA systems with maximum-ratio transmission under a Rayleigh fading channel are established, and approximate probability density functions for the legitimate user Bob's signal-to-noise ratio (SNR) and the eavesdropper Eve's SNR are derived using Mercer's theorem and Landau's eigenvalue theorem. Three scenarios are considered, including a single Eve, multiple independent Eves, and multiple collaborative Eves. Next, the expressions of the secrecy rate and SOP under these three scenarios are derived, and the high-SNR slope, high-SNR power offset, diversity order, and array gain in Bob's high-SNR region are obtained. It is then theoretically proven that, in all three scenarios, the CAPA system achieves the same high-SNR slope and the same diversity order, with the latter being equal to the spatial degrees of freedom. Moreover, the CAPA system with a single Eve has the smallest high-SNR offset and the highest array gain, whereas the CAPA system with multiple collaborative Eves exhibits the largest high-SNR offset and the lowest array gain. Finally, the theoretical analyses of secrecy rate, SOP, high-SNR performance are validated by the simulation results, and a higher secrecy rate and a lower SOP are achieved by the CAPA systems compared to the spatially-discrete array systems with half-wavelength antenna spacing.

cs.IT↗

arXiv2026

Transmit Pinching-Antenna Systems (T-PASS): Connecting Wired to Wireless Communications

A transmit pinching-antenna system (T-PASS) framework is proposed, in which a single pinched waveguide is employed to jointly serve one wired user equipment (UE) and multiple wireless UEs. The signal radiated by the pinching antennas (PAs) is used to serve the wireless UEs, whereas the residual guided signal at the waveguide termination is used to serve the wired UE. To facilitate T-PASS transmission and mitigate inter-user interference, a hybrid non-orthogonal multiple access (NOMA) scheme is introduced. Wireless UEs are scheduled by time-division multiple access (TDMA), and, in each slot, the scheduled wireless UE is paired with the wired UE through power-domain NOMA. Within this framework, the PA positions, PA radiation coefficients, power allocation, and TDMA time-slot allocation are jointly optimized to maximize a weighted sum rate (WSR). i) For the two-user case with one wired UE and one wireless UE, the optimal PA position and successive interference cancellation (SIC) decoding order are derived. Closed-form optimal power allocation is obtained, and a near-optimal PA radiation coefficient is determined through a low-complexity one-dimensional search. ii) For the multiuser case with one wired UE and multiple wireless UEs, four protocols with different PA-position and PA-radiation configurations are proposed. For each protocol, a low-complexity element-wise alternating optimization algorithm is developed to optimize the PA positions and radiation coefficients, while closed-form solutions are derived for the optimal power allocation and time-slot allocation. Numerical results are presented to show that: i) under typical T-PASS configurations, the wired UE is selected as the strong user in the optimal SIC decoding order; ii) the proposed T-PASS framework achieves a significantly higher WSR than conventional wireless-only PASS.

eess.SP↗

arXiv2026

Exploiting Segmented Waveguide-Enabled Pinching-Antenna Systems (SWANs) for Uplink Tri-Hybrid Beamforming

A segmented waveguide-enabled pinching-antenna system (SWAN)-based tri-hybrid beamforming architecture is proposed for uplink multi-user MIMO communications, which jointly optimizes digital, analog, and pinching beamforming. Both fully-connected (FC) and partially-connected (PC) structures between RF chains and segment feed points are considered. For the FC architecture, tri-hybrid beamforming is optimized using the weighted minimum mean-square error (WMMSE) and zero-forcing (ZF) approaches. Specifically, the digital, analog, and pinching beamforming components are optimized via a closed-form solution, Riemannian manifold optimization, and a Gauss-Seidel search, respectively. For the PC architecture, an interleaved topology tailored to the SWAN receiver is proposed, in which segments assigned to each RF chain (sub-array) are interleaved with those from other sub-arrays. Based on this structure, a WMMSE-based tri-hybrid design is developed, in which the Riemannian-manifold update used for the FC structure is replaced by element-wise phase calibration to exploit sparsity in analog beamforming. To gain insight into the performance of the proposed system, the rate-scaling laws with respect to the number of segments are derived for both the FC and PC structures. Our results demonstrate that: i)~SWAN with the proposed tri-hybrid beamforming consistently outperforms conventional hybrid beamforming and conventional pinching-antenna systems with pinching beamforming for both the FC and PC structures; and ii)~the PC structure can strike a good balance between sum rate and energy consumption when the number of segments is large; and iii) the achievable rate does not necessarily increase with the number of segments.

eess.SP↗

arXiv2026

Pinching Antennas for Multiple Access in Multigroup Multicast Communications

This paper aims to design multiple access (MA) schemes to improve the max-min fairness (MMF) for pinching antennas (PAs)-based multigroup multicast communications, where PA placement and resource allocation are jointly optimized. Specifically, three MA schemes are considered to facilitate the multicast transmission: i) treating interference as noise (TIN), ii) non-orthogonal multiple access (NOMA), and iii) time-division multiple access (TDMA) with two PA reconfiguration protocols, namely pinching switching (PS) and pinching multiplexing (PM). i) For TIN, a closed-form solution is derived for optimal power allocation, while a sequential element-wise optimization (SEO) is developed for the PA placement. ii) For NOMA, a recursive power allocation framework incorporating a bisection search is developed, and a hierarchical objective evaluation (HOE) mechanism is incorporated to simplify the SEO process for PA location update. iii) For TDMA, the PS protocol allows the PA locations to be optimized separately using the SEO method, after which the time-power allocation is solved as a convex problem with a global optimum. Under the PM protocol, the PA locations are jointly optimized with the time-power resources through a Karush-Kuhn-Tucker (KKT)-based analytical solution. Numerical results demonstrate that: i) the pinching-antenna system (PASS) architecture significantly outperforms traditional fixed-antenna systems. ii) TDMA-PS achieves superior performance by fully leveraging the flexible PA reconfiguration and benefiting from interference-free transmission, whereas TIN serves as a practical lower-bound solution due to its simplicity despite its limited performance. iii) NOMA consistently outperforms TDMA-PM and, in high transmit power regimes with heterogeneous multicast group distributions, can even surpass the performance achieved by TDMA-PS.

eess.SP↗

arXiv2026

Failure Detection for Pinching-Antenna Systems

A signal processing-based framework is proposed for detecting random segment failures in segmented waveguide-enabled pinching-antenna systems. To decouple the passively combined uplink signal and to provide per-segment observability, tagged pilots are employed. A simple tag is attached to each segment and is used to apply a known low-rate modulation at the segment feed, which assigns a unique signature to each segment. Based on the tagged-pilot model, a low-complexity per-segment maximum-likelihood (ML) detector is developed for the case in which the pilot length is no smaller than the number of segments. For the case in which the pilot length is smaller than the number of segments, sparsity in the failure-indicator vector is exploited and a compressive sensing-based detector is adopted. Numerical results show that the per-segment detector approaches joint ML performance, while the compressive sensing-based detector achieves reliable detection with a short pilot and can outperform baselines that require much longer pilots.

eess.SP↗

arXiv2026

Pinching Antennas-Aided Integrated Sensing and Multicast Communication Systems

A pinching antennas (PAs)-aided integrated sensing and multicast communication framework is proposed. In this framework, the communication performance is measured by the multicast rate considering max-min fairness. Moreover, the sensing performance is quantified by the Bayesian Cramér-Rao bound (BCRB), where a Gauss-Hermite quadrature-based approach is proposed to compute the Bayesian Fisher information matrix. Based on these metrics, PA placement is optimized under three criteria: communications-centric (C-C), sensing-centric (S-C), and Pareto-optimal designs. These designs are investigated in two scenarios: the single-PA case and the multi-PA case. 1) For the single-PA case, a closed-form solution is derived for the location of the C-C transmit PA, while the S-C design yields optimal transmit and receive PA placements that are symmetric about the target location. Leveraging this geometric insight, the Pareto-optimal design is solved by enforcing this PA placement symmetry, thereby reducing the joint transmit and receive PA placement to the transmit PA optimization. 2) For the general multi-PA case, the PA placements constitute a highly non-convex optimization problem. To solve this, an element-wise alternating optimization-based method is proposed to sequentially optimize all PA placements for the S-C design, and is further incorporated into an augmented Lagrangian (AL) framework and a rate-profile formulation to solve the C-C and Pareto-optimal design problems, respectively. Numerical results show that: i) PASS substantially outperforms fixed-antenna baselines in both multicast rate and sensing accuracy; ii) the multicasting gain becomes more pronounced as the user density increases; and iii) the sensing accuracy improves with the number of deployed PAs.

eess.SP↗

arXiv2026

Dynamic and Static Energy Efficient Design of Pinching Antenna Systems

We study the energy efficiency of pinching-antenna systems (PASSs) by developing a consistent formulation for power distribution in these systems. The per-antenna power distribution in PASSs is not controlled explicitly by a power allocation policy, but rather implicitly through tuning of pinching couplings and locations. Both these factors are tunable: (i) pinching locations are tuned using movable elements, and (ii) couplings can be tuned by varying the effective coupling length of the pinching elements. While the former is feasible to be addressed dynamically in settings with low user mobility, the latter cannot be addressed at a high rate. We thus develop a class of hybrid dynamic-static algorithms, which maximize the energy efficiency by updating the system parameters at different rates. Our experimental results depict that dynamic tuning of pinching locations can significantly boost energy efficiency of PASSs.

eess.SP↗

arXiv2026

On the Maintainability of Pinching-Antenna Systems: A Failure-Repair Perspective

The pinching-antenna system (PASS) enables wireless channel reconfiguration through optimized placement of pinching antennas along dielectric waveguides. In this article, a unified analytical framework is proposed to characterize the maintainability of PASS. Within this framework, random waveguide failures and repairs are modeled by treating the waveguide lifetime and repair time as exponentially distributed random variables, which are characterized by the failure rate and the repair rate, respectively. The operational state of the waveguide is described by a two-state continuous-time Markov chain, for which the transition probabilities and steady-state probabilities of the waveguide being working or failed are analyzed. By incorporating the randomness of the waveguide operational state into the transmission rate, system maintainability is characterized using the probability of non-zero rate (PNR) and outage probability (OP). The proposed framework is applied to both a conventional PASS employing a single long waveguide and a segmented waveguide-enabled pinching-antenna system (SWAN) composed of multiple short waveguide segments under two operational protocols: segment switching (SS) and segment aggregation (SA). Closed-form expressions for the PNR and OP are derived for both architectures, and the corresponding scaling laws are analyzed with respect to the service-region size and the number of segments. It is proven that both SS-based and SA-based SWAN achieve higher PNR and lower OP than conventional PASS, which confirms the maintainability advantage of segmentation. Numerical results demonstrate that: i) the maintainability gain of SWAN over conventional PASS increases with the number of segments, and ii) SA provides stronger maintainability than SS.

eess.SP↗

arXiv2026

On the Performance of Tri-Hybrid Beamforming Using Pinching Antennas

The Pinching-Antenna System (PASS) reconfigures wireless channels through \emph{pinching beamforming}, in which the active positions of pinching antennas (PAs) along dielectric waveguides are optimized to shape the radiation pattern. This article investigates the performance of PASS-enabled tri-hybrid beamforming, where pinched waveguides are integrated with a hybrid digital-analog beamformer to mitigate path loss and enhance spectral efficiency. The channel capacity of the proposed system is characterized by deriving the optimal tri-hybrid beamformer at both the digital and analog domains, as well as the optimal placement of PAs. Closed-form upper and lower bounds of the channel capacity are obtained, leading to a capacity scaling law with respect to the number of PAs. Numerical results verify the tightness of the derived bounds and demonstrate that applying PASS to tri-hybrid beamforming yields a significant performance gain over conventional hybrid beamforming under the same number of radio-frequency chains.

eess.SP↗

arXiv2026

Pinching-Antenna Systems (PASS): A Tutorial

Pinching antenna systems (PASS) present a breakthrough among the flexible-antenna technologies, and distinguish themselves by facilitating large-scale antenna reconfiguration, line-of-sight creation, scalable implementation, and near-field benefits, thus bringing wireless communications from the last mile to the last meter. A comprehensive tutorial is presented in this paper. First, the fundamentals of PASS are discussed, including PASS signal models, hardware models, power radiation models, and pinching antenna activation methods. Building upon this, the information-theoretic capacity limits achieved by PASS are characterized, and several typical performance metrics of PASS-based communications are analyzed to demonstrate its superiority over conventional antenna technologies. Next, the pinching beamforming design is investigated. The corresponding power scaling law is first characterized. For the joint transmit and pinching design in the general multiple-waveguide case, 1) a pair of transmission strategies is proposed for PASS-based single-user communications to validate the superiority of PASS, namely sub-connected and fully connected structures; and 2) three practical protocols are proposed for facilitating PASS-based multi-user communications, namely waveguide switching, waveguide division, and waveguide multiplexing. A possible implementation of PASS in wideband communications is further highlighted. Moreover, the channel state information acquisition in PASS is elaborated with a pair of promising solutions. To overcome the high complexity and suboptimality inherent in conventional convex-optimization-based approaches, machine-learning-based methods for operating PASS are also explored, focusing on selected deep neural network architectures and training algorithms. Finally, several promising applications of PASS in next-generation wireless networks are highlighted.

eess.SP↗

arXiv2025

Sum-Rate Maximization for Uplink Segmented Waveguide-Enabled Pinching-Antenna Systems

A multiuser uplink transmission framework based on the segmented waveguide-enabled pinching-antenna system (SWAN) is proposed under two operating protocols: segment selection (SS) and segment aggregation (SA). For each protocol, the achievable uplink sum-rate is characterized for both time-division multiple access (TDMA) and non-orthogonal multiple access (NOMA). Low-complexity placement methods for the pinching antennas (PAs) are developed for both protocols and for both multiple-access schemes. Numerical results validate the effectiveness of the proposed methods and show that SWAN achieves higher sum-rate performance than conventional pinching-antenna systems, while SA provides additional performance gains over SS.

eess.SP↗

arXiv2025

Robust Beamforming for Pinching-Antenna Systems

Pinching-antenna system (PASS) mitigates large-scale path loss by enabling flexible placement of pinching antennas (PAs) along the dielectric waveguide. However, most existing studies assume perfect channel state information (CSI), overlooking the impact of channel uncertainty. This paper addresses this gap by proposing a robust beamforming framework for both lossy and lossless waveguides. For baseband beamforming, the lossy case yields an second-order cone programming-based solution, while the lossless case admits a closed-form solution via maximum ratio transmission. The PAs' positions in both cases are optimized through the Gauss-Seidel-based method. Numerical results validate the effectiveness of the proposed algorithm and demonstrate that PASS exhibits superior robustness against channel uncertainty compared with conventional fixed-antenna systems. Notably, its worst-case achievable rate can even exceed the fixed-antenna baseline under perfect CSI.

eess.SP↗

arXiv2025

Segmented Waveguide-Enabled Pinching-Antenna Systems (SWANs) for ISAC

A segmented waveguide-enabled pinching-antenna system (SWAN)-assisted integrated sensing and communications (ISAC) framework is proposed. Unlike conventional pinching antenna systems (PASS), which use a single long waveguide, SWAN divides the waveguide into multiple short segments, each with a dedicated feed point. Thanks to the segmented structure, SWAN enhances sensing performance by significantly simplifying the reception model and reducing the in-waveguide propagation loss. To balance performance and complexity, three segment controlling protocols are proposed for the transceivers, namely i) \emph{segment selection} to select a single segment for signal transceiving, ii) \emph{segment aggregation} to aggregate signals from all segments using a single RF chain, and iii) \emph{segment multiplexing} to jointly process the signals from all segments using individual RF chains. The theoretical sensing performance limit is first analyzed for different protocols, unveiling how the sensing performance gain of SWAN scales with the number of segments. Based on this performance limit, the Pareto fronts of sensing and communication performance are characterized for the simple one-user one-target case, which is then extended to the general multi-user single-target case based on time-division multiple access (TDMA). Numerical results are presented to verify the correctness of the derivations and the effectiveness of the proposed algorithms, which jointly confirm the advantages of SWAN-assisted ISAC.

eess.SP↗

arXiv2025

Rotatable and Movable Antenna-Enabled Near-Field Integrated Sensing and Communication

The aim of this article is to investigate the performance of near-field integrated sensing and communication (ISAC) systems using rotatable movable antennas (RMAs). In the proposed RMA-enabled system, the positions and rotations of antennas at the base station (BS) are dynamically adjusted to enhance both communication and sensing capabilities. Two designs are explored: i) a sensing-centric design that minimizes the Cram$\text{é}$r-Rao bound (CRB) with signal-to-interference-plus-noise ratio (SINR) constraints, and ii) a communication-centric design that maximizes the sum-rate with a CRB constraint. To solve the formulated optimization problems, two alternating optimization (AO)-based algorithms are proposed capitalizing on the semidefinite relaxation (SDR) method and the particle swarm optimization (PSO) method. Numerical results demonstrate that: i) the proposed RMA-enabled system outperforms the conventional fixed-position antenna and non-rotatable movable antenna systems in both sensing-centric and communication-centric designs and RMAs' rotations show a higher performance gain in communication-centric design; ii) the proposed optimization methods achieve the Pareto boundary in both sensing-centric and communication-centric designs.

eess.SP↗

arXiv2025

Movable Antennas-Assisted Over-the-Air Computation: Dynamic and Static Design

A novel over-the-air computation (AirComp) framework empowered by movable antennas (MAs) is proposed to significantly enhance computation accuracy. Within this framework, the joint optimization of transmit power control, antenna positioning, and receive beamforming is investigated. Two design strategies are developed: (i) a dynamic design, where MA positions are optimized based on fast-varying instantaneous channel state information (CSI); and (ii) a static design, where antenna positions are optimized using only slow-varying statistical CSI. Numerical results validate the superior MSE performance of the proposed MA-enabled AirComp framework and demonstrate its clear advantage over benchmark systems employing conventional fixed-position antennas (FPAs).

eess.SP↗