Searcharxiv⌕ Search

arXiv subjects

Chongwen Huang

Publications and source records attributed to Chongwen Huang.

At least 163 records · Page 9Linked to original sources

A Bayesian Tensor Approach to Enable RIS for 6G Massive Unsourced Random Access

This paper investigates the problem of joint massive devices separation and channel estimation for a reconfigurable intelligent surface (RIS)-aided unsourced random access (URA) scheme in the sixth-generation (6G) wireless networks. In particular, by associating the data sequences to a rank-one tensor and exploiting the angular sparsity of the channel, the detection problem is cast as a high-order coupled tensor decomposition problem. However, the coupling among multiple devices to RIS (device-RIS) channels together with their sparse structure make the problem intractable. By devising novel priors to incorporate problem structures, we design a novel probabilistic model to capture both the element-wise sparsity from the angular channel model and the low rank property due to the sporadic nature of URA. Based on the this probabilistic model, we develop a coupled tensor-based automatic detection (CTAD) algorithm under the framework of variational inference with fast convergence and low computational complexity. Moreover, the proposed algorithm can automatically learn the number of active devices and thus effectively avoid noise overfitting. Extensive simulation results confirm the effectiveness and improvements of the proposed URA algorithm in large-scale RIS regime.

cs.IT↗

Bidirectional Approximate Message Passing for RIS-Assisted Multi-User MISO Communications

Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and lowpower configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted multi-user wireless communication system and present a joint channel estimation and signal recovery algorithm in this paper. Specifically, we propose a bidirectional approximate message passing algorithm that applies the Taylor series expansion and Gaussian approximation to simplify the sum-product algorithm in the formulated problem. Our simulation results show that the proposed algorithm shows the superiority over a state-of-art benchmark method. We also provide insights on the impact of different RIS parameter settings on the proposed algorithms.

cs.IT↗

Converged Reconfigurable Intelligent Surface and Mobile Edge Computing for Space Information Networks

Space information networks (SIN) are facing an ever-increasing thirst for high-speed and high-capacity seamless data transmission due to the integration of ground, air, and space communications. However, this imposes a new paradigm on the architecture design of the integrated SIN. Recently, reconfigurable intelligent surfaces (RISs) and mobile edge computing (MEC) are the most promising techniques, conceived to improve communication and computation capability by reconfiguring the wireless propagation environment and offloading. Hence, converging RISs and MEC in SIN is becoming an effort to reap the double benefits of computation and communication. In this article, we propose an RIS-assisted collaborative MEC architecture for SIN and discuss its implementation. Then we present its potential benefits, major challenges, and feasible applications. Subsequently, we study different cases to evaluate the system data rate and latency. Finally, we conclude with a list of open issues in this research area.

cs.NI↗

AI-Assisted MAC for Reconfigurable Intelligent Surface-Aided Wireless Networks: Challenges and Opportunities

Recently, significant research attention has been devoted to the study of reconfigurable intelligent surfaces (RISs), which are capable of reconfiguring the wireless propagation environment by exploiting the unique properties of metamaterials-based integrated large arrays of inexpensive antennas. Existing research demonstrates that RISs significantly improve the physical layer performance, including the wireless coverage, achievable data rate and energy efficiency. However, the medium access control (MAC) of multiple users accessing an RIS-enabled channel is still in its infancy, while many open issues remain to be addressed. In this article, we present four typical RIS-aided multi-user scenarios with special emphasis on the MAC schemes. We then propose and elaborate upon centralized, distributed and hybrid artificial-intelligence (AI)-assisted MAC architectures in RIS-aided multi-user communications systems. Finally, we discuss some challenges, perspectives and potential applications of RISs as they are related to MAC design.

cs.NI↗

Energy Efficient Reconfigurable Intelligent Surface Enabled Mobile Edge Computing Networks with NOMA

Reconfigurable intelligent surface (RIS) has emerged as a promising technology for achieving high spectrum and energy efficiency in future wireless communication networks. In this paper, we investigate an RIS-aided single-cell multi-user mobile edge computing (MEC) system where an RIS is deployed to support the communication between a base station (BS) equipped with MEC servers and multiple single-antenna users. To utilize the scarce frequency resource efficiently, we assume that users communicate with BS based on a non-orthogonal multiple access (NOMA) protocol. Each user has a computation task which can be computed locally or partially/fully offloaded to the BS. We aim to minimize the sum energy consumption of all users by jointly optimizing the passive phase shifters, the size of transmission data, transmission rate, power control, transmission time and the decoding order. Since the resulting problem is non-convex, we use the block coordinate descent method to alternately optimize two separated subproblems. More specifically, we use the dual method to tackle a subproblem with given phase shift and obtain the closed-form solution; and then we utilize penalty method to solve another subproblem for given power control. Moreover, in order to demonstrate the effectiveness of our proposed algorithm, we propose three benchmark schemes: the time-division multiple access (TDMA)-MEC scheme, the full local computing scheme and the full offloading scheme. We use an alternating 1-D search method and the dual method that can solve the TDMA-based transmission problem well. Numerical results demonstrate that the proposed scheme can increase the energy efficiency and achieve significant performance gains over the three benchmark schemes.

cs.IT↗

Reconfigurable Intelligent Surface-Assisted Aerial-Terrestrial Communications via Multi-Task Learning

The aerial-terrestrial communication system constitutes an efficient paradigm for supporting and complementing terrestrial communications. However, the benefits of such a system cannot be fully exploited, especially when the line-of-sight (LoS) transmissions are prone to severe deterioration due to complex propagation environments in urban areas. The emerging technology of reconfigurable intelligent surfaces (RISs) has recently become a potential solution to mitigate propagation-induced impairments and improve wireless network coverage. Motivated by these considerations, in this paper, we address the coverage and link performance problems of the aerial-terrestrial communication system by proposing an RIS-assisted transmission strategy. In particular, we design an adaptive RIS-assisted transmission protocol, in which the channel estimation, transmission strategy, and data transmission are independently implemented in a frame. On this basis, we formulate an RIS-assisted transmission strategy optimization problem as a mixed-integer non-linear program (MINLP) to maximize the overall system throughput. We then employ multi-task learning to speed up the solution to the problem. Benefiting from multi-task learning, the computation time is reduced by about four orders of magnitude. Numerical results show that the proposed RIS-assisted transmission protocol significantly improves the system throughput and reduces the transmit power.

cs.NI↗

Channel Estimation for Full-Duplex RIS-assisted HAPS Backhauling with Graph Attention Networks

In this paper, graph attention network (GAT) is firstly utilized for the channel estimation. In accordance with the 6G expectations, we consider a high-altitude platform station (HAPS) mounted reconfigurable intelligent surface-assisted two-way communications and obtain a low overhead and a high normalized mean square error performance. The performance of the proposed method is investigated on the two-way backhauling link over the RIS-integrated HAPS. The simulation results denote that the GAT estimator overperforms the least square in full-duplex channel estimation. Contrary to the previously introduced methods, GAT at one of the nodes can separately estimate the cascaded channel coefficients. Thus, there is no need to use time-division duplex mode during pilot signaling in full-duplex communication. Moreover, it is shown that the GAT estimator is robust to hardware imperfections and changes in small-scale fading characteristics even if the training data do not include all these variations.

cs.IT↗

Reconfigurable Intelligent Surface-Assisted MAC for Wireless Networks: Protocol Design, Analysis, and Optimization

Reconfigurable intelligent surface (RIS) is a promising reflective radio technology for improving the coverage and rate of future wireless systems by reconfiguring the wireless propagation environment. The current work mainly focuses on the physical layer design of RIS. However, enabling multiple devices to communicate with the assistance of RIS is a crucial challenging problem. Motivated by this, we explore RIS-assisted communications at the medium access control (MAC) layer and propose an RIS-assisted MAC framework. In particular, RISassisted transmissions are implemented by pre-negotiation and a multi-dimension reservation (MDR) scheme. Based on this, we investigate RIS-assisted single-channel multi-user (SCMU) communications. Wherein the RIS regarded as a whole unity can be reserved by one user to support the multiple data transmissions, thus achieving high efficient RIS-assisted connections at the user. Moreover, under frequency-selective channels, implementing the MDR scheme on the RIS group division, RISassisted multi-channel multi-user (MCMU) communications are further explored to improve the service efficiency of the RIS and decrease the computation complexity. Besides, a Markov chain is built based on the proposed RIS-assisted MAC framework to analyze the system performance of SCMU/MCMU. Then the optimization problem is formulated to maximize the overall system capacity of SCMU/MCMU with energy-efficient constraint. The performance evaluations demonstrate the feasibility and effectiveness of each

cs.NI↗

Intelligent Spectrum Learning for Wireless Networks with Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surface (RIS) has become a promising technology for enhancing the reliability of wireless communications, which is capable of reflecting the desired signals through appropriate phase shifts. However, the intended signals that impinge upon an RIS are often mixed with interfering signals, which are usually dynamic and unknown. In particular, the received signal-to-interference-plus-noise ratio (SINR) may be degraded by the signals reflected from the RISs that originate from non-intended users. To tackle this issue, we introduce the concept of intelligent spectrum learning (ISL), which uses an appropriately trained convolutional neural network (CNN) at the RIS controller to help the RISs infer the interfering signals directly from the incident signals. By capitalizing on the ISL, a distributed control algorithm is proposed to maximize the received SINR by dynamically configuring the active/inactive binary status of the RIS elements. Simulation results validate the performance improvement offered by deep learning and demonstrate the superiority of the proposed ISL-aided approach.

eess.SP↗

Optimal Resource Allocation for Multi-UAV Assisted Visible Light Communication

In this paper, the optimization of deploying unmanned aerial vehicles (UAVs) over a reconfigurable intelligent surfaces (RISs)-assisted visible light communication (VLC) system is studied. In the considered model, UAVs are required to simultaneously provide wireless services as well as illumination for ground users. To meet the traffic and illumination demands of the ground users while minimizing the energy consumption of the UAVs, one must optimize UAV deployment, phase shift of RISs, user association and RIS association. This problem is formulated as an optimization problem whose goal is to minimize the transmit power of UAVs via adjusting UAV deployment, phase shift of RISs, user association and RIS association. To solve this problem, the original optimization problem is divided into four subproblems and an alternating algorithm is proposed. Specifically, phases alignment method and semidefinite program (SDP) algorithm are proposed to optimize the phase shift of RISs. Then, the UAV deployment optimization is solved by the successive convex approximation (SCA) algorithm. Since the problems of user association and RIS association are integer programming, the fraction relaxation method is adopted before using dual method to find the optimal solution. For simplicity, a greedy algorithm is proposed as an alternative to optimize RIS association. The proposed two schemes demonstrate the superior performance of 34:85% and 32:11% energy consumption reduction over the case without RIS, respectively, through extensive numerical study.

cs.IT↗

Joint Channel Estimation and Signal Recovery in RIS-Assisted Multi-User MISO Communications

Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Channel estimation and signal recovery in RISbased systems are among the most critical technical challenges, due to the large number of unknown variables referring to the RIS unit elements and the transmitted signals. In this paper, we focus on the downlink of a RIS-assisted multi-user Multiple Input Single Output (MISO) communication system and present a joint channel estimation and signal recovery scheme based on the PARAllel FACtor (PARAFAC) decomposition. This decomposition unfolds the cascaded channel model and facilitates signal recovery using the Bilinear Generalized Approximate Message Passing (BiG-AMP) algorithm. The proposed method includes an alternating least squares algorithm to iteratively estimate the equivalent matrix, which consists of the transmitted signals and the channels between the base station and RIS, as well as the channels between the RIS and the multiple users. Our selective simulation results show that the proposed scheme outperforms a benchmark scheme that uses genie-aided information knowledge. We also provide insights on the impact of different RIS parameter settings on the proposed scheme.

cs.IT↗

Beamforming Design for Multiuser Transmission Through Reconfigurable Intelligent Surface

This paper investigates the problem of resource allocation for multiuser communication networks with a reconfigurable intelligent surface (RIS)-assisted wireless transmitter. In this network, the sum transmit power of the network is minimized by controlling the phase beamforming of the RIS and transmit power of the BS. This problem is posed as a joint optimization problem of transmit power and RIS control, whose goal is to minimize the sum transmit power under signal-to-interference-plus-noise ratio (SINR) constraints of the users. To solve this problem, a dual method is proposed, where the dual problem is obtained as a semidefinite programming problem. After solving the dual problem, the phase beamforming of the RIS is obtained in the closed form, while the optimal transmit power is obtained by using the standard interference function. Simulation results show that the proposed scheme can reduce up to 94% and 27% sum transmit power compared to the maximum ratio transmission (MRT) beamforming and zero-forcing (ZF) beamforming techniques, respectively.

eess.SP↗

Hybrid Beamforming for RIS-Empowered Multi-hop Terahertz Communications: A DRL-based Method

Wireless communication in the TeraHertz band (0.1--10 THz) is envisioned as one of the key enabling technologies for the future six generation (6G) wireless communication systems. However, very high propagation attenuations and molecular absorptions of THz frequencies often limit the signal transmission distance and coverage range. Benefited from the recent breakthrough on the reconfigurable intelligent surfaces (RIS) for realizing smart radio propagation environment, we propose a novel hybrid beamforming scheme for the multi-hop RIS-assisted communication networks to improve the coverage range at THz-band frequencies. We investigate the joint design of digital beamforming matrix at the BS and analog beamforming matrices at the RISs, by leveraging the recent advances in deep reinforcement learning (DRL) to combat the propagation loss. Simulation results show that our proposed scheme is able to improve 50\% more coverage range of THz communications compared with the benchmarks. Furthermore, it is also shown that our proposed DRL-based method is a state-of-the-art method to solve the NP-bard beamforming problem, especially when the signals at RIS-empowered THz communication networks experience multiple hops.

eess.SP↗

Dense Small Satellite Networks for Modern Terrestrial Communication Systems: Benefits, Infrastructure, and Technologies

Dense small satellite networks (DSSN) in low earth orbits (LEO) can benefit several mobile terrestrial communication systems (MTCS). However, the potential benefits can only be achieved through careful consideration of DSSN infrastructure and identification of suitable DSSN technologies. In this paper, we discuss several components of DSSN infrastructure including satellite formations, orbital paths, inter-satellite communication (ISC) links, and communication architectures for data delivery from source to destination. We also review important technologies for DSSN as well as the challenges involved in the use of these technologies in DSSN. Several open research directions to enhance the benefits of DSSN for MTCS are also identified in the paper. A case study showing the integration benefits of DSSN in MTCS is also included.

eess.SP↗

Intelligent Task Offloading for Heterogeneous V2X Communications

With the rapid development of autonomous driving technologies, it becomes difficult to reconcile the conflict between ever-increasing demands for high process rate in the intelligent automotive tasks and resource-constrained on-board processors. Fortunately, vehicular edge computing (VEC) has been proposed to meet the pressing resource demands. Due to the delay-sensitive traits of automotive tasks, only a heterogeneous vehicular network with multiple access technologies may be able to handle these demanding challenges. In this paper, we propose an intelligent task offloading framework in heterogeneous vehicular networks with three Vehicle-to-Everything (V2X) communication technologies, namely Dedicated Short Range Communication (DSRC), cellular-based V2X (C-V2X) communication, and millimeter wave (mmWave) communication. Based on stochastic network calculus, this paper firstly derives the delay upper bound of different offloading technologies with a certain failure probability. Moreover, we propose a federated Q-learning method that optimally utilizes the available resources to minimize the communication/computing budgets and the offloading failure probabilities. Simulation results indicate that our proposed algorithm can significantly outperform the existing algorithms in terms of offloading failure probability and resource cost.

cs.NI↗

Communication and Computing Resource Optimization for Connected Autonomous Driving

Transportation system is facing a sharp disruption since the Connected Autonomous Vehicles (CAVs) can free people from driving and provide good driving experience with the aid of Vehicle-to-Vehicle (V2V) communications. Although CAVs bring benefits in terms of driving safety, vehicle string stability, and road traffic throughput, most existing work aims at improving only one of these performance metrics. However, these metrics may be mutually competitive, as they share the same communication and computing resource in a road segment. From the perspective of joint optimizing driving safety, vehicle string stability, and road traffic throughput, there is a big research gap to be filled on the resource management for connected autonomous driving. In this paper, we first explore the joint optimization on driving safety, vehicle string stability, and road traffic throughput by leveraging on the consensus Alternating Directions Method of Multipliers algorithm (ADMM). However, the limited communication bandwidth and on-board processing capacity incur the resource competition in CAVs. We next analyze the multiple tasks competition in the contention based medium access to attain the upper bound delay of V2V-related application offloading. An efficient sleeping multi-armed bandit tree-based algorithm is proposed to address the resource assignment problem. A series of simulation experiments are carried out to validate the performance of the proposed algorithms.

cs.IT↗

User Activity Detection and Channel Estimation for Grant-Free Random Access in LEO Satellite-Enabled Internet-of-Things

With recent advances on the dense low-earth orbit (LEO) constellation, LEO satellite network has become one promising solution to providing global coverage for Internet-of-Things (IoT) services. Confronted with the sporadic transmission from randomly activated IoT devices, we consider the random access (RA) mechanism, and propose a grant-free RA (GF-RA) scheme to reduce the access delay to the mobile LEO satellites. A Bernoulli-Rician message passing with expectation maximization (BR-MP-EM) algorithm is proposed for this terrestrial-satellite GF-RA system to address the user activity detection (UAD) and channel estimation (CE) problem. This BR-MP-EM algorithm is divided into two stages. In the inner iterations, the Bernoulli messages and Rician messages are updated for the joint UAD and CE problem. Based on the output of the inner iterations, the expectation maximization (EM) method is employed in the outer iterations to update the hyper-parameters related to the channel impairments. Finally, simulation results show the UAD and CE accuracy of the proposed BR-MP-EM algorithm, as well as the robustness against the channel impairments.

cs.IT↗

Holographic MIMO Surfaces for 6G Wireless Networks: Opportunities, Challenges, and Trends

Future wireless networks are expected to evolve towards an intelligent and software reconfigurable paradigm enabling ubiquitous communications between humans and mobile devices. They will be also capable of sensing, controlling, and optimizing the wireless environment to fulfill the visions of low-power, high-throughput, massively-connected, and low-latency communications. A key conceptual enabler that is recently gaining increasing popularity is the Holographic Multiple Input Multiple Output Surface (HMIMOS) that refers to a low-cost transformative wireless planar structure comprising of sub-wavelength metallic or dielectric scattering particles, which is capable of impacting electromagnetic waves according to desired objectives. In this article, we provide an overview of HMIMOS communications by introducing the available hardware architectures for reconfigurable such metasurfaces and their main characteristics, as well as highlighting the opportunities and key challenges in designing HMIMOS-enabled communications.

cs.IT↗