arXiv subjects

Chris J. Pearce

Publications and source records attributed to Chris J. Pearce.

9 recordsLinked to original sources

arXiv2026

A multiphysics model for triboelectric nanogenerator design with explicit surface roughness representation

The design of triboelectric nanogenerators (TENGs) for efficient energy harvesting requires predictive models that capture the interplay between surface roughness, real contact area, and electrostatic behaviour across diverse tribolayer materials and roughness levels. To address this demand, this paper presents a multiphysics finite element framework that couples mechanical contact analysis with electrostatic simulations, considering exact surface roughness representations rather than idealised statistical approximations. Compared with optical interference microscopy measurements, the framework predicts the real contact area ratio more accurately than analytical models. The proposed approach captures the electrostatic behaviour by scaling the TENG surface charge density with the real contact area ratio between the rough tribolayers, computed for a given mechanical load. This method improves agreement with experiments for open-circuit voltage and capacitance relative to approximate analytical models. To represent the TENG circuit, a time-dependent ordinary differential equation is integrated, enabling evaluation of electrical responses under varying load conditions and elucidating the roles of surface roughness, mechanical load, contact-separation frequency, and resistive load. The framework provides a robust, scalable tool for performance optimisation across dielectric materials, mechanical behaviours, and operating conditions and is readily extendable to other surface-dependent energy-harvesting devices.

physics.comp-ph↗

arXiv2025

Conservative data-driven finite element framework

This paper presents a new data-driven finite element framework that is applicable to a broad range of engineering simulation problems. In the data-driven approach, the conservation laws and boundary conditions are satisfied by means of the finite element method, while the experimental data is used directly in numerical simulations, avoiding material models. Critically, we introduce a "weaker'" mixed finite element formulation, which relaxes the regularity requirements on the approximation space for the primary field. At the same time, the continuity of the normal flux component is enforced across inner boundaries, allowing the conservation law to be satisfied in the strong sense. The relaxed regularity of the approximation spaces makes it easier to observe how imperfections in the datasets, such as missing or noisy data, result in non-uniqueness of the solution. This can be quantified to predict the uncertainty of the results using methods such as Markov chain Monte Carlo. Furthermore, this formulation provides a posteriori error indicators tailored for the data-driven approach, providing confidence in the results and enabling efficient solution schemes via adaptive hp-refinement. The capabilities of the formulation are demonstrated on an example of the nonlinear heat transfer in nuclear graphite using synthetically generated material datasets. This work provides an essential component for numerical frameworks for complex engineering systems such as digital twins.

cs.CE↗

arXiv2020

Numerical investigation into fracture resistance of bone following adaptation

Bone adapts in response to its mechanical environment. This evolution of bone density is one of the most important mechanisms for developing fracture resistance. A finite element framework for simulating bone adaptation, commonly called bone remodelling, is presented. This is followed by a novel method to both quantify fracture resistance and to simulate fracture propagation. The authors' previous work on the application of configurational mechanics for modelling fracture is extended to include the influence of heterogeneous bone density distribution. The main advantage of this approach is that configurational forces, and fracture energy release rate, are expressed exclusively in terms of nodal quantities. This approach avoids the need for post-processing and enables a fully implicit formulation for modelling the evolving crack front. In this paper density fields are generated from both (a) bone adaptation analysis and (b) subject-specific geometry and material properties obtained from CT scans. It is shown that, in order to correctly evaluate the configurational forces at the crack front, it is necessary to have a spatially smooth density field with higher regularity than if the field is directly approximated on the finite element mesh. Therefore, discrete density data is approximated as a smooth density field using a Moving Weighted Least Squares method. Performance of the framework is demonstrated using numerical simulations for bone adaptation and subsequent crack propagation, including consideration of an equine 3rd metacarpal bone. The degree of bone adaption is shown to influence both fracture resistance and the resulting crack path.

cs.CE↗

arXiv2016

Three-dimensional nonlinear micro/meso-mechanical response of the fibre-reinforced polymer composites

A three-dimensional multi-scale computational homogenisation framework is developed for the prediction of nonlinear micro/meso-mechanical response of the fibre-reinforced polymer (FRP) composites. Two dominant damage mechanisms, i.e. matrix elasto-plastic response and fibre-matrix decohesion are considered and modelled using a non-associative pressure dependent paraboloidal yield criterion and cohesive interface elements respectively. A linear-elastic transversely isotropic material model is used to model yarns/fibres within the representative volume element (RVE). A unified approach is used to impose the RVE boundary conditions, which allows convenient switching between linear displacement, uniform traction and periodic boundary conditions. The computational model is implemented within the framework of the hierarchic finite element, which permits the use of arbitrary orders of approximation. Furthermore, the computational framework is designed to take advantage of distributed memory high-performance computing. The accuracy and performance of the computational framework are demonstrated with a variety of numerical examples, including unidirectional FRP composite, a composite comprising a multi-fibre and multi-layer RVE, with randomly generated fibres, and a single layered plain weave textile composite. Results are validated against the reference experimental/numerical results from the literature. The computational framework is also used to study the effect of matrix and fibre-matrix interfaces properties on the homogenised stress-strain responses.

cs.CE↗

arXiv2016

Energy consistent framework for continuously evolving 3D crack propagation

This paper presents a formulation for brittle fracture in 3D elastic solids within the context of configurational mechanics. The local form of the first law of thermodynamics provides a condition for equilibrium of the crack front. The direction of the crack propagation is shown to be given by the direction of the configurational forces on the crack front that maximise the local dissipation. The evolving crack front is continuously resolved by the finite element mesh, without the need for face splitting or the use of enrichment techniques. A monolithic solution strategy is adopted, solving simultaneously for both the material displacements (i.e. crack extension) and the spatial displacements, is adopted. In order to trace the dissipative loading path, an arc-length procedure is developed that controls the incremental crack area growth. In order to maintain mesh quality, smoothing of the mesh is undertaken as a continuous process, together with face flipping, node merging and edge splitting where necessary. Hierarchical basis functions of arbitrary polynomial order are adopted to increase the order of approximation without the need to change the finite element mesh. Performance of the formulation is demonstrated by means of three representative numerical simulations, demonstrating both accuracy and robustness.

cs.CE↗

arXiv2013

Corotational formulation for 3d solids. An analysis of geometrically nonlinear foam deformation

This paper presents theory for the Lagrange co-rotational (CR) formulation of finite elements in the geometrically nonlinear analysis of 3D structures. In this paper strains are assumed to be small while the magnitude of rotations from the reference configuration is not restricted. A new best fit rotator and consistent spin filter are derived. Lagrange CR formulation is applied with Hybrid Trefftz Stress elements, although presented methodology can be applied to arbitrary problem formulation and discretization technique, f.e. finite volume methods and lattice models, discreet element methods. Efficiency of CR formulation can be utilized in post-buckling stability analysis, damage and fracture mechanics, modelling of dynamic fragmentation of bodies made from quasi-brittle materials, solid fluid interactions and analysis of post-stressed structures, discreet body dynamics.

math.NA↗

arXiv2011

A Galerkin least-square stabilisation technique for hyperelastic biphasic soft tissue

An hyperelastic biphasic model is presented. For slow-draining problems (permeability less than 1\times10-2 mm4 N-1 s-1), numerical instabilities in the form of non-physical oscillations in the pressure field are observed in 3D problems using tetrahedral Taylor-Hood finite elements. As an alternative to considerable mesh refinement, a Galerkin least-square stabilization framework is proposed. This technique drastically reduces the pressure discrepancies and prevents these oscillations from propagating towards the centre of the medium. The performance and robustness of this technique are demonstrated on a 3D numerical example.

math.NA↗

arXiv2009

Meso-scale approach to modeling concrete subjected to thermo-mechanical loading

Concrete subjected to combined compressive stresses and temperature loading exhibits compressive strains, which are considerably greater than for concrete subjected to compressive stresses alone. This phenomenon is called transient thermal creep or load induced thermal strain and is usually modeled by macroscopic phenomenological constitutive laws which have only limited predictive capabilities. In the present study a meso-scale modeling approach is proposed in which the macroscopically observed transient thermal creep results from the mismatch of thermal expansions of the meso-scale constituents. The meso-structure of concrete is idealized as a two-dimensional three phase material consisting of aggregates, matrix and interfacial transition zones (ITZ). The nonlinear material response of the phases are described by a damage-plasticity interface model. The meso-scale approach was applied to analyze compressed concrete specimens subjected to uniform temperature histories and the analysis results were compared to experimental results reported in the literature.

cond-mat.mtrl-sci↗

arXiv2009

Analysis of the microbond test using nonlinear fracture mechanics

Microbond tests composed of single fibre and matrix droplet are often used to determine the properties of fibre reinforced composites. Interfacial shear strength is quantified by the maximum pull-out force assuming a uniform stress distribution along the fibre. Here, nonlinear finite element analyses are performed to investigate the validity of this assumption.

cond-mat.mtrl-sci↗