arXiv subjects

Chris J. Pickard

Publications and source records attributed to Chris J. Pickard.

At least 109 records · Page 6Linked to original sources

arXiv2013

High Energy Density Mixed Polymeric Phase From Carbon Monoxide and Nitrogen

Carbon monoxide and nitrogen are among the potentially interesting high-energy density materials. However, in spite of the physical similarities of the molecules, they behave very differently at high pressures. Using density functional theory and structural prediction methods, we examine the ability of these systems to combine their respective properties and form novel mixed crystalline phases under pressures of up to 100 GPa. Interestingly, we find that CO catalyzes the molecular dissociation of N2, which means mixed structures are favored at a relatively low pressure (below 18 GPa), and that a three-dimensional framework with Pbam symmetry becomes the most stable phase above 52 GPa, i.e., at much milder conditions than in pure solid nitrogen. This structure is dynamically stable at ambient pressure and has an energy density of approximately 2:2 kJ/g, making it a candidate for a high-energy density material, and one that could be achieved at less prohibitive experimental conditions.

cond-mat.mtrl-sci↗

arXiv2013

Stable all nitrogen metallic salt at terapascal pressures

The phase diagram and equation of state of dense nitrogen are of interest in understanding the fundamental physics and chemistry under extreme conditions, including planetary processes, and in discovering new materials. We predict several stable phases of nitrogen at multi-TPa pressures, including a P4/nbm structure consisting of partially charged N2 pairs and N5 tetrahedra, which is stable in the range 2.5-6.8 TPa. This is followed by a modulated layered structure between 6.8 and 12.6 TPa, which also exhibits a significant charge transfer. The P4/nbm metallic nitrogen salt and the modulated structure are stable at high pressures and temperatures, and they exhibit strongly ionic features and charge density distortions, which is unexpected in an element under such extreme conditions and could represent a new class of nitrogen materials. The P-T phase diagram of nitrogen at TPa pressures is investigated using quasiharmonic phonon calculations and ab initio molecular dynamics simulations.

cond-mat.mtrl-sci↗

arXiv2013

Xenon Reacts with Iron at the Conditions of the Earth's Core

Studies of the Earth's atmosphere have shown that more than 90% of xenon (Xe) is depleted compared with its abundance in chondritic meteorites. This long-standing missing Xe paradox has become the subject of considerable interest and several models for a Xe reservoir have been proposed. Whether the missing Xe is hiding in the Earth's core has remained a long unanswered question. The key to address this issue lies in the reactivity of Xe with iron (Fe, the main constituent of the Earth's core), which has been denied by earlier studies. Here we report on the first evidence of the chemical reaction of Xe and Fe at the conditions of the Earth's core, predicted through first-principles calculations and unbiased structure searching techniques. We find that Xe and Fe form a stable, inter-metallic compound of XeFe3, adopting a Cu3Au-type face-centered cubic structure above 183 GPa and at 4470 K. As the result of a Xe -> Fe charge transfer, Xe loses its chemical inertness by opening up the filled 5p electron shell and functioning as a 5p-like element, whilst Fe is unusually negatively charged, acting as an oxidant rather than a reductant as usual. Our work establishes that the Earth's core is a natural reservoir for Xe storage, and possibly provides the key to unlocking the missing Xe paradox.

physics.geo-ph↗

arXiv2013

Electron-Phonon Coupling and the Metalization of Solid Helium at Terapascal Pressures

Solid He is studied in the pressure and temperature ranges 1-40 TPa and 0-10,000 K using first-principles methods. Anharmonic vibrational properties are calculated within a self-consistent field framework, including the internal and free energies, density-pressure relation, stress tensor, thermal expansion, and the electron-phonon coupling renormalization of the electronic band gap. We find that an accurate description of electron-phonon coupling requires us to use a non-perturbative approach. The metalization pressure of 32.9 TPa at 0 K is larger than found previously. The vibrational effects are large; for example at P=30 TPa the band gap is increased by 2.8 eV by electron-phonon coupling and a further 0.1 eV by thermal expansion compared to the static value. The implications of the calculated metalization pressure for the cooling of white dwarfs are discussed.

cond-mat.mtrl-sci↗

arXiv2013

Decomposition and terapascal phases of water ice

Computational searches for stable and metastable structures of water ice and other H:O compositions at TPa pressures have led us to predict that H$_2$O decomposes into H$_2$O$_2$ and a hydrogen-rich phase at pressures of a little over 5 TPa. The hydrogen-rich phase is stable over a wide range of hydrogen contents, and it might play a role in the erosion of the icy component of the cores of gas giants as H$_2$O comes into contact with hydrogen. Metallization of H$_2$O is predicted at a higher pressure of just over 6 TPa, and therefore H$_2$O does not have a thermodynamically stable low-temperature metallic form. We have also found a new and rich mineralogy of complicated water ice phases which are more stable in the pressure range 0.8--2 TPa than any predicted previously.

cond-mat.mtrl-sci↗

arXiv2013

Lithiation of silicon via lithium Zintl-defect complexes

An extensive search for low-energy lithium defects in crystalline silicon using density-functional-theory methods and the ab initio random structure searching (AIRSS) method shows that the four-lithium-atom substitutional point defect is exceptionally stable. This defect consists of four lithium atoms with strong ionic bonds to the four under-coordinated atoms of a silicon vacancy defect, similar to the bonding of metal ions in Zintl phases. This complex is stable over a range of silicon environments, indicating that it may aid amorphization of crystalline silicon and form upon delithiation of the silicon anode of a Li-ion rechargeable battery.

cond-mat.mtrl-sci↗

arXiv2013

Classical and quantum ordering of protons in cold solid hydrogen under megabar pressures

A combination of state-of-the-art theoretical methods has been used to obtain an atomic-level picture of classical and quantum ordering of protons in cold high-pressure solid hydro-gen. We focus mostly on phases II and III of hydrogen, exploring the effects of quantum nuclear motion on certain features of these phases (through a number of ab initio path-integral molecular dynamics (PIMD) simulations at particular points on the phase diagram). We also examine the importance of van der Waals forces in this system by performing calculations using the optB88-vdW density functional, which accounts for non-local correlations. Our calculations reveal that the transition between phases I and II is strongly quantum in nature, resulting from a competition between anisotropic inter-molecular interactions that restrict molecular rotation and thermal plus quantum fluctuations of the nuclear positions that facilitate it. The transition from phase II to III is more classical because quantum nuclear motion plays only a secondary role and the transition is determined primarily by the underlying potential energy surface. A structure of P21c symmetry with 24 atoms in the primitive unit cell is found to be stable when anharmonic quantum nuclear vibrational motion is included at finite temperatures using the PIMD method. This structure gives a good account of the infra-red (IR) and Raman vibron frequencies of phase II. We find ad-ditional support for C2/c structure as a strong candidate for phase III, since it remains transparent up to 300 GPa, even when quantum nuclear effects are included. Finally, we find that accounting for van der Waals forces improves the agreement between experiment and theory for the parts of the phase diagram considered, when compared to previous work which employed the widely-used Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional.

cond-mat.mtrl-sci↗

arXiv2012

Quantum simulation of low-temperature metallic liquid hydrogen

Experiments and computer simulations have shown that the melt-ing temperature of solid hydrogen drops with pressure above about 65 GPa, suggesting that a liquid state might exist at low temperatures. It has also been suggested that this low temperature liquid state might be non-molecular and metallic, although evidence for such behaviour is lacking. Here, we report results for hydrogen at high pressures using ab initio path-integral molecular dynamics methods, which include a description of the quantum motion of the protons at finite temperatures. We have determined the melting temperature as a function of pressure by direct simulation of the coexistence of the solid and liquid phases and have found an atomic solid phase from 500 to 800 GPa which melts at <200 K. Beyond this and up to pressures of 1200 GPa a metallic atomic liquid is stable at temperatures as low as 50 K. The quantum motion of the protons is critical to the low melting temperature in this system as ab initio simulations with classical nuclei lead to a considerably higher melting temperature of \sim300 K across the entire pressure range considered.

cond-mat.mtrl-sci↗

arXiv2012

Diamondoid Structure of Polymeric Nitrogen at High Pressures

High-pressure polymeric structures of nitrogen have attracted great attention owing to their potential application as high-energy-density materials. We report the density functional structural prediction of the unexpected stabilization of a diamondoid (or N10-cage) structure of polymeric nitrogen at high pressures. The structure adopts a highly symmetric body-centered cubic form with lattice sites occupied by N10 tetracyclic cages, each of which consists of 10 atoms and is covalently bonded with its six next-nearest N10 cages. The prediction of this diamondoid structure rules out the earlier proposed helical tunnel phase and demonstrates the high-order nature of polymeric nitrogen at extreme high pressures. Diamondoid nitrogen is a wide-gap insulator and energetically more favorable than the experimental cubic gauche and previously predicted layered Pba2 phases above 263 GPa, a pressure which is accessible to high pressure experiment.

cond-mat.mtrl-sci↗

arXiv2012

Density functional theory study of phase IV of solid hydrogen

We have studied solid hydrogen up to pressures of 300 GPa and temperatures of 350 K using density functional theory methods and have found "mixed structures" that are more stable than those predicted earlier. Mixed structures consist of alternate layers of strongly bonded molecules and weakly bonded graphene-like sheets. Quasi-harmonic vibrational calculations show that mixed structures are the most stable at room temperature over the pressure range 250-295 GPa. These structures are stabilized with respect to strongly-bonded molecular phases at room temperature by the presence of lower-frequency vibrational modes arising from the graphene-like sheets. Our results for the mixed structures are consistent with the experimental Raman data [M. I. Eremets and I. A. Troyan, Nature Mater. 10 927 (2011) and R. T. Howie et al. Phys. Rev. Lett. 108 125501 (2012)]. We find that mixed phases are reasonable structural models for phase IV of hydrogen.

cond-mat.mtrl-sci↗

arXiv2012

Energetics of hydrogen/lithium complexes in silicon analyzed using the Maxwell construction

We have studied hydrogen/lithium complexes in crystalline silicon using density-functional-theory methods and the ab initio random structure searching (AIRSS) method for predicting structures. A method based on the Maxwell construction and convex hull diagrams is introduced which gives a graphical representation of the relative stabilities of point defects in a crystal and enables visualization of the changes in stability when the chemical potentials are altered. We have used this approach to study lithium and hydrogen impurities in silicon, which models aspects of the anode material in the recently-suggested lithium-ion batteries. We show that hydrogen may play a role in these anodes, finding that hydrogen atoms bind to three-atom lithium clusters in silicon, forming stable {H,3Li} and {2H,3Li} complexes, while the {H,2Li} complex is almost stable.

cond-mat.mtrl-sci↗

arXiv2011

High pressure ionic and molecular crystals of ammonia monohydrate within density functional theory

A combination of first-principles density functional theory calculations and a search over structures predicts the stability of a proton-transfer modification of ammonia monohydrate with space group P4/nmm. The phase diagram is calculated with the PBE density functional, and the effects of a semi-empirical dispersion correction, zero point motion, and finite temperature are investigated. Comparison with MP2 and coupled cluster calculations shows that the PBE functional over-stabilizes proton transfer phases because too much electronic charge moves with the proton. This over-binding is partially corrected by using the PBE0 hybrid exchange-correlation functional, which increases the enthalpy of P4/nmm by about 0.6 eV per formula unit relative to phase I of ammonia monohydrate (AMH-I) and shifts the transition to the proton transfer phase from the PBE pressure of 2.8 GPa to about 10 GPa. This is consistent with experiment as proton transfer phases have not been observed at pressures up to ~9 GPa, while higher pressures have not yet been explored experimentally.

cond-mat.mtrl-sci↗

arXiv2011

Persistence and eventual demise of oxygen molecules at terapascal pressures

Computational searches for structures of solid oxygen under pressures in the multi TPa range have been carried out using density-functional-theory methods. We find that molecular oxygen persists to about 1.9 TPa at which it transforms into a semiconducting square spiral-like polymeric structure (I41/acd) with a band gap of about 3.0 eV. Solid oxygen forms a metallic zig-zag chain-like structure (Cmcm) at about 3.0 TPa, but the chains in each layer gradually merge as the pressure is increased and a structure of Fmmm symmetry forms at about 9.5 TPa in which each atom has four nearest neighbors. The superconducting properties of molecular oxygen do not vary much with compression, although the structure becomes more symmetric. The electronic properties of oxygen have a complex evolution with pressure, swapping between insulating, semiconducting and metallic.

cond-mat.mtrl-sci↗

arXiv2011

Predicted formation of superconducting platinum-hydride crystals under pressure in the presence of molecular hydrogen

Noble metals adopt close-packed structures at ambient pressure and rarely undergo structural transformation at high pressures. Platinum (Pt), in particular, is normally considered to be unreactive and is therefore not expected to form hydrides under pressure. We predict that platinum hydride (PtH) has a lower enthalpy than its constituents solid Pt and molecular hydrogen at pressures above 21.5 GPa. We have calculated structural phase transitions from tetragonal to hexagonal close-packed or face-centered cubic (fcc) PtH between 70 and 80 GPa. Linear response calculations indicate that PtH is a superconductor at these pressures with a critical temperature of about 10--25 K. These findings help to shed light on recent observations of pressure-induced metallization and superconductivity in hydrogen-rich materials. We show that formation of fcc metal hydrides under pressure is common among noble metal hydrides and examine the possibility of superconductivity in these materials.

cond-mat.supr-con↗

arXiv2011

Ab initio Random Structure Searching

It is essential to know the arrangement of the atoms in a material in order to compute and understand its properties. Searching for stable structures of materials using first-principles electronic structure methods, such as density functional theory (DFT), is a rapidly growing field. Here we describe our simple, elegant and powerful approach to searching for structures with DFT which we call ab initio random structure searching (AIRSS). Applications to discovering structures of solids, point defects, surfaces, and clusters are reviewed. New results for iron clusters on graphene, silicon clusters, polymeric nitrogen, hydrogen-rich lithium hydrides, and boron are presented.

cond-mat.mtrl-sci↗

arXiv2009

Hydrogen/nitrogen/oxygen defect complexes in silicon from computational searches

Point defect complexes in crystalline silicon composed of hydrogen, nitrogen, and oxygen atoms are studied within density-functional theory (DFT). Ab initio Random Structure Searching (AIRSS) is used to find low-energy defect structures. We find new lowest-energy structures for several defects: the triple-oxygen defect, {3O}, triple oxygen with a nitrogen atom, {N, 3O}, triple nitrogen with an oxygen atom, {3N,O}, double hydrogen and an oxygen atom, {2H,O}, double hydrogen and oxygen atoms, {2H,2O} and four hydrogen/nitrogen/oxygen complexes, {H,N,O}, {2H,N,O}, {H,2N,O} and {H,N,2O}. We find that some defects form analogous structures when an oxygen atom is replaced by a NH group, for example, {H,N,2O} and {3O}, and {H,N} and {O}. We compare defect formation energies obtained using different oxygen chemical potentials and investigate the relative abundances of the defects.

cond-mat.mtrl-sci↗

arXiv2009

Post-Cotunnite phase of TeO2

We have used first-principles density-functional-theory methods with a random-structure-searching technique to determine the structure of the previously unidentified post-cotunnite phase of TeO2. Our calculations indicate a transition from the cotunnite to post-cotunnite phase at 130 GPa. The predicted post-cotunnite structure has P2_1/m space group symmetry and its calculated x-ray diffraction pattern is in good agreement with the available experimental data. We find that the cotunnite phase re-enters at about 260 GPa.

cond-mat.mtrl-sci↗

arXiv2008

Hydrogen/silicon complexes in silicon from computational searches

Defects in crystalline silicon consisting of a silicon self-interstitial atom and one, two, three, or four hydrogen atoms are studied within density-functional theory (DFT). We search for low-energy defects by starting from an ensemble of structures in which the atomic positions in the defect region have been randomized. We then relax each structure to a minimum in the energy. We find a new defect consisting of a self-interstitial and one hydrogen atom (denoted by {I,H}) which has a higher symmetry and a lower energy than previously reported structures. We recover the {I,H_2} defect found in previous studies and confirm that it is the most stable such defect. Our best {I,H_3} defect has a slightly different structure and lower energy than the one previously reported, and our lowest energy {I,H_4} defect is different to those of previous studies.

cond-mat.mtrl-sci↗