SearcharxivSearch

arXiv subjects

Christiaan Bekker

Publications and source records attributed to Christiaan Bekker.

9 recordsLinked to original sources

Scalable registration of single quantum emitters within solid immersion lenses through femtosecond laser writing

The precise registration of solid-state quantum emitters to photonic structures is a major technological challenge for fundamental research (e.g. in cavity quantum electrodynamics) and applications to quantum technology. Standard approaches include the complex multi-step fabrication of photonic structures on pre-existing emitters, both registered within a grid of lithographically-defined markers. Here, we demonstrate a marker-free, femtosecond laser writing technique to generate individual quantum emitters within photonic structures. Characterization of 28 defect centers, laser-written at the centers of pre-existing solid immersion lens structures, showed offsets relative to the photonic structure's center of 260~nm in the x-direction and 60~nm in the y-direction, with standard deviations of $\pm 170$~nm and $\pm 90$~nm, respectively, resulting in an average 4.5 times enhancement of the optical collection efficiency. This method is scalable for developing integrated quantum devices using spin-photon interfaces in silicon carbide and is easily extendable to other materials.

quant-ph

Broadband Fourier transform spectroscopy of quantum emitters photoluminescence with sub-nanosecond temporal resolution

The spectral characterization of quantum emitter luminescence over broad wavelength ranges and fast timescales is important for applications ranging from biophysics to quantum technologies. Here we present the application of time-domain Fourier transform spectroscopy, based on a compact and stable birefringent interferometer coupled to low-dark-count superconducting single-photon detectors, to the study of quantum emitters. We experimentally demonstrate that the system enables spectroscopy of quantum emitters over a broad wavelength interval from the near-infrared to the telecom range, where grating-based spectrometers coupled to InGaAs cameras are typically noisy and inefficient. We further show that the high temporal resolution of single-photon detectors, which can be on the order of tens of picoseconds, enables the monitoring of spin-dependent spectral changes on sub-nanosecond timescales.

quant-ph

Real-time adaptive estimation of decoherence timescales for a single qubit

Characterising the time over which quantum coherence survives is critical for any implementation of quantum bits, memories and sensors. The usual method for determining a quantum system's decoherence rate involves a suite of experiments probing the entire expected range of this parameter, and extracting the resulting estimation in post-processing. Here we present an adaptive multi-parameter Bayesian approach, based on a simple analytical update rule, to estimate the key decoherence timescales ($T_1$, $T_2^*$ and $T_2$) and the corresponding decay exponent of a quantum system in real time, using information gained in preceding experiments. This approach reduces the time required to reach a given uncertainty by a factor up to an order of magnitude, depending on the specific experiment, compared to the standard protocol of curve fitting. A further speed-up of a factor $\sim 2$ can be realised by performing our optimisation with respect to sensitivity as opposed to variance.

quant-ph

Ultra-narrow inhomogeneous spectral distribution of telecom-wavelength vanadium centres in isotopically-enriched silicon carbide

Spin-active quantum emitters have emerged as a leading platform for quantum technologies. However, one of their major limitations is the large spread in optical emission frequencies, which typically extends over tens of GHz. Here, we investigate single V4+ vanadium centres in 4H-SiC, which feature telecom-wavelength emission and a coherent S=1/2 spin state. We perform spectroscopy on single emitters and report the observation of spin-dependent optical transitions, a key requirement for spin-photon interfaces. By engineering the isotopic composition of the SiC matrix, we reduce the inhomogeneous spectral distribution of different emitters down to 100 MHz, significantly smaller than any other single quantum emitter. Additionally, we tailor the dopant concentration to stabilise the telecom-wavelength V4+ charge state, thereby extending its lifetime by at least two orders of magnitude. These results bolster the prospects for single V emitters in SiC as material nodes in scalable telecom quantum networks.

quant-ph

Scalable fabrication of hemispherical solid immersion lenses in silicon carbide through grayscale hard-mask lithography

Grayscale lithography allows the creation of micrometer-scale features with spatially-controlled height in a process that is fully compatible with standard lithography. Here, solid immersion lenses are demonstrated in silicon carbide using a novel fabrication protocol combining grayscale lithography and hard-mask techniques to allow nearly hemispherical lenses of 5 $μ$m radius to be etched into the substrate. The technique is highly scalable and compatible with CMOS technology, and device aspect ratios can be tuned after resist patterning by controlling the chemistry of the subsequent dry etch. These results provide a low-cost, high-throughput and industrially-relevant alternative to focused ion beam milling for the creation of high-aspect-ratio, rounded microstructures.

physics.optics

Free spectral range electrical tuning of a high quality on-chip microcavity

Reconfigurable photonic circuits have applications ranging from next-generation computer architectures to quantum networks, coherent radar and optical metamaterials. However, complete reconfigurability is only currently practical on millimetre-scale device footprints. Here, we overcome this barrier by developing an on-chip high quality microcavity with resonances that can be electrically tuned across a full free spectral range (FSR). FSR tuning allows resonance with any source or emitter, or between any number of networked microcavities. We achieve it by integrating nanoelectronic actuation with strong optomechanical interactions that create a highly strain-dependent effective refractive index. This allows low voltages and sub-nanowatt power consumption. We demonstrate a basic reconfigurable photonic network, bringing the microcavity into resonance with an arbitrary mode of a microtoroidal optical cavity across a telecommunications fibre link. Our results have applications beyond photonic circuits, including widely tuneable integrated lasers, reconfigurable optical filters for telecommunications and astronomy, and on-chip sensor networks.

physics.app-ph

Injection locking of an electro-optomechanical device

The techniques of cavity optomechanics have enabled significant achievements in precision sensing, including the detection of gravitational waves and the cooling of mechanical systems to their quantum ground state. Recently, the inherent non-linearity in the optomechanical interaction has been harnessed to explore synchronization effects, including the spontaneous locking of an oscillator to a reference injection signal delivered via the optical field. Here, we present the first demonstration of a radiation-pressure driven optomechanical system locking to an inertial drive, with actuation provided by an integrated electrical interface. We use the injection signal to suppress drift in the optomechanical oscillation frequency, strongly reducing phase noise by over 55 dBc/Hz at 2 Hz offset. We further employ the injection tone to tune the oscillation frequency by more than 2 million times its narrowed linewidth. In addition, we uncover previously unreported synchronization dynamics, enabled by the independence of the inertial drive from the optical drive field. Finally, we show that our approach may enable control of the optomechanical gain competition between different mechanical modes of a single resonator. The electrical interface allows enhanced scalability for future applications involving arrays of injection-locked precision sensors.

physics.optics

High bandwidth on-chip capacitive tuning of microtoroid resonators

We report on the design, fabrication and characterization of silica microtoroid based cavity opto-electromechanical systems (COEMS). Electrodes patterned onto the microtoroid resonators allow for rapid capacitive tuning of the optical whispering gallery mode resonances while maintaining their ultrahigh quality factor, enabling applications such as efficient radio to optical frequency conversion, optical routing and switching applications.

physics.optics

Effect of quantum nuclear motion on hydrogen bonding

This work considers how the properties of hydrogen bonded complexes, D-H....A, are modified by the quantum motion of the shared proton. Using a simple two-diabatic state model Hamiltonian, the analysis of the symmetric case, where the donor (D) and acceptor (A) have the same proton affinity, is carried out. For quantitative comparisons, a parametrization specific to the O-H....O complexes is used. The vibrational energy levels of the one-dimensional ground state adiabatic potential of the model are used to make quantitative comparisons with a vast body of condensed phase data, spanning a donor-acceptor separation (R) range of about 2.4-3.0 A, i.e., from strong to weak bonds. The position of the proton and its longitudinal vibrational frequency, along with the isotope effects in both are discussed. An analysis of the secondary geometric isotope effects, using a simple extension of the two-state model, yields an improved agreement of the predicted variation with R of frequency isotope effects. The role of the bending modes in also considered: their quantum effects compete with those of the stretching mode for certain ranges of H-bond strengths. In spite of the economy in the parametrization of the model used, it offers key insights into the defining features of H-bonds, and semi-quantitatively captures several experimental trends.

physics.chem-ph