arXiv subjects

Christian Delacroix

Publications and source records attributed to Christian Delacroix.

At least 19 recordsLinked to original sources

arXiv2025

MIRAC-5 on the MMT with MAPS: annular groove phase mask N-band coronagraphic upgrade

We describe the coronagraphic upgrade underway for the Mid-Infrared Array Camera-5 (MIRAC-5) to be used with the 6.5-m MMT telescope utilizing the new MMT Adaptive optics exoPlanet characterization System (MAPS). Mid-IR ground-based coronagraphic adaptive-optics-assisted imaging can be a powerful tool for characterizing exoplanet atmospheres and studying protoplanets in formation within circumstellar disks around young stars. In addition to enabling ground-based observations of bright targets in the background limit, high actuator density 1-2 kHz adaptive optics systems can be competitive with JWST in the contrast limit. We have procured an annular groove phase mask (AGPM) and performed preliminary characterization of its on-axis source rejection as a function of wavelength. We present an optimized Lyot Stop design for use with the AGPM using the High-contrast End-to-End Performance Simulator (HEEPS). Future work includes implementing the Quadrant Analysis of Coronagraphic Images for Tip-tilt Sensing (QACITS) control loop algorithm with MAPS. We present the system overview, pupil mask design, and expected performance metrics aligned with our scientific goals, building upon recent advances with MIRAC-5 (Bowens et al. 2025) and MAPS.

astro-ph.IM↗

arXiv2025

ELT-METIS imaging simulations for disks and envelopes associated with FU Ori-type objects

We investigate the detectability of extended mid-infrared (MIR) emission associated with FU-Ori type objects (FUors) using the METIS coronagraphs on the 39-m Extremely Large Telescope (ELT). The imaging simulations were made for three representative filters ($\lambda$=3.8, 4.8, and 11.3 micron) of the METIS instrument. We demonstrate that the detectability of the extended MIR emission using these coronagraphs is highly dependent on the uncertain nature of the central FUor and its circumstellar environment in various contexts. These contexts are: (A) whether the central radiation source is either a flat self-luminous accretion disk or a star at near-infrared (NIR) wavelengths, (B) the size of the accretion disk for the bright central MIR emission at milliarcsecond scales, (C) whether the extended emission is due to either an optically thick disk or an optically thin envelope, and (D) dust grain models. Observations at $\lambda$=3.8 micron will allow us to detect the extended emission in many cases, while the number of cases with detection may significantly decrease toward longer wavelengths due to the fainter nature of the extended emission and high thermal background noise. In some cases, the presence of a binary companion can significantly hamper detections of the extended MIR emission. NIR and MIR imaging observations at existing 8-m class telescopes, prior to the METIS observations, will be useful for (1) reducing the many model uncertainties and (2) searching for binary companions associated with FUors, therefore determining the best observing strategy using METIS.

astro-ph.IM↗

arXiv2024

ALF: an asymmetric Lyot wavefront sensor for the ELT/METIS vortex coronagraph

Non-common path quasi-static and differential aberrations are one of the big hurdles of direct imaging for current and future high-contrast imaging instruments. They increase speckle and photon noise thus reducing the achievable contrast and lead to a significant hit in HCI performance. The Mid-infrared ELT Imager and Spectrograph (METIS) will provide high-contrast imaging, including vortex coronagraphy in L, M and N bands, with the ultimate goal of directly imaging temperate rocky planets around the nearest stars. Ground-based mid-infrared observations are however also impacted by water vapor inhomogeneities in the atmosphere, which generate additional chromatic turbulence not corrected by the near-infrared adaptive optics. This additional source of wavefront error (WFE) significantly impacts HCI performance, and even dominates the WFE budget in N band. Instantaneous focal plane wavefront sensing is thus required to mitigate its impact. In this context, we propose to implement a novel wavefront sensing approach for the vortex coronagraph using an asymmetric Lyot stop and machine learning. The asymmetric pupil stop allows for the problem to become solvable, lifting the ambiguity on the sign of even Zernike modes. Choosing the Lyot plane instead of the entrance pupil for this mask is also not arbitrary: it preserves the rejection efficiency of the coronagraph and minimizes the impact of the asymmetry on the throughput. Last but not least, machine learning allows us to solve this inversion problem which is non-linear and lacks an analytical solution. In this contribution, we present our concept, our simulation framework, our results and a first laboratory demonstration of the technique.

astro-ph.IM↗

arXiv2024

METIS high-contrast imaging: from final design to manufacturing and testing

The Mid-infrared ELT Imager and Spectrograph (METIS) is one of the first-generation scientific instruments for the ELT, built under the supervision of ESO by a consortium of research institutes across and beyond Europe. Designed to cover the 3 to 13 $\mu$m wavelength range, METIS had its final design reviewed in Fall 2022, and has then entered in earnest its manufacture, assembly, integration, and test (MAIT) phase. Here, we present the final design of the METIS high-contrast imaging (HCI) modes. We detail the implementation of the two main coronagraphic solutions selected for METIS, namely the vortex coronagraph and the apodizing phase plate, including their combination with the high-resolution integral field spectrograph of METIS, and briefly describe their respective backup plans (Lyot coronagraph and shaped pupil plate). We then describe the status of the MAIT phase for HCI modes, including a review of the final design of individual components such as the vortex phase masks, the grayscale ring apodizer, and the apodizing phase plates, as well as a description of their on-going performance tests and of our plans for system-level integration and tests. Using end-to-end simulations, we predict the performance that will be reached on sky by the METIS HCI modes in presence of various environmental and instrumental disturbances, including non-common path aberrations and water vapor seeing, and discuss our strategy to mitigate these various effects. We finally illustrate with mock observations and data processing that METIS should be capable of directly imaging temperate rocky planets around the nearest stars.

astro-ph.IM↗

arXiv2023

Semi-analytic calculations for extended mid-Infrared emission associated with FU Ori-type objects

(Aims) Near-infrared imaging polarimetry at high-angular resolutions has revealed intriguing distribution of circumstellar dust towards FU Ori-type objects (FUors). These dust grains are probably associated with either an accretion disk or an infalling envelope. Follow-up observations in the mid-infrared would lead us to a better understanding of the hierarchy of the mass accretion processes onto FUors (i.e., envelope and disk accretion), which hold keys for understanding the mechanism of their accretion outbursts and the growth of low-mass young stellar objects in general. (Method) We have developed a semi-analytic method to estimate the mid-infrared intensity distributions using the observed polarized intensity (PI) distributions in H-band (lambda=1.65 micron). We have derived intensity distributions for two FUors, FU Ori and V1735 Cyg, at three wavelengths (lambda=3.5/4.8/12 micron) for various cases, i.e. with a star or a flat compact self-luminous disk as an illuminating source; an optically thick disk or an optically thin envelope for circumstellar dust grains; and three different dust models. (Results) We have been able to obtain self-consistent results for many cases and regions, in particular when the viewing angle of the disk/envelope is zero (face-on). Our calculations suggest that the mid-infrared extended emission at the above wavelengths is dominated by the single scattering process. The contribution of thermal emission is negligible unless we add an additional heating mechanism such as adiabatic heating in spiral structures and/or fragments. The uncertain nature of the central illuminating source, the distribution of circumstellar dust grains and the optical properties of dust grains yield uncertainties in the intensity levels on orders of magnitude, e.g., 20-800, for the disk/envelope aspect ratios of ~0.2 and lambda=3-13 micron.

astro-ph.SR↗

arXiv2022

Impact of water vapor seeing on mid-infrared high-contrast imaging at ELT scale

The high-speed variability of the local water vapor content in the Earth atmosphere is a significant contributor to ground-based wavefront quality throughout the infrared domain. Unlike dry air, water vapor is highly chromatic, especially in the mid-infrared. This means that adaptive optics correction in the visible or near-infrared domain does not necessarily ensure a high wavefront quality at longer wavelengths. Here, we use literature measurements of water vapor seeing, and more recent infrared interferometric data from the Very Large Telescope Interferometer (VLTI), to evaluate the wavefront quality that will be delivered to the METIS mid-infrared camera and spectrograph for the Extremely Large Telescope (ELT), operating from 3 to 13 μm, after single-conjugate adaptive optics correction in the near-infrared. We discuss how the additional wavefront error due to water vapor seeing is expected to dominate the wavefront quality budget at N band (8-13 μm), and therefore to drive the performance of mid-infrared high-contrast imaging modes at ELT scale. Then we present how the METIS team is planning to mitigate the effect of water vapor seeing using focal-plane wavefront sensing techniques, and show with end-to-end simulations by how much the high-contrast imaging performance can be improved.

astro-ph.IM↗

arXiv2019

High contrast imaging with ELT/METIS: The wind driven halo, from SPHERE to METIS

METIS is one of the three first-light instruments planned for the ELT, mainly dedicated to high contrast imaging in the mid-infrared. On the SPHERE high-contrast instrument currently installed at the VLT, we observe that one of the main contrast limitations is the wind driven halo, due to the limited AO running speed with respect to the atmospheric turbulence temporal evolution. From this observation, we extrapolate this signature to the ELT/METIS instrument, which is equipped with a single conjugated adaptive optics system and with several coronagraphic devices. By making use of an analytic AO simulator, we compare the amount of wind driven halo observed with SPHERE and with METIS, under the same turbulence conditions.

astro-ph.IM↗

arXiv2016

The W. M. Keck Observatory infrared vortex coronagraph and a first image of HIP79124 B

An optical vortex coronagraph has been implemented within the NIRC2 camera on the Keck II telescope and used to carry out on-sky tests and observations. The development of this new L'-band observational mode is described, and an initial demonstration of the new capability is presented: a resolved image of the low-mass companion to HIP79124, which had previously been detected by means of interferometry. With HIP79124 B at a projected separation of 186.5 mas, both the small inner working angle of the vortex coronagraph and the related imaging improvements were crucial in imaging this close companion directly. Due to higher Strehl ratios and more relaxed contrasts in L' band versus H band, this new coronagraphic capability will enable high-contrast small-angle observations of nearby young exoplanets and disks on a par with those of shorter-wavelength extreme adaptive optics coronagraphs.

astro-ph.SR↗

arXiv2016

Characterization of the inner disk around HD 141569 A from Keck/NIRC2 L-band vortex coronagraphy

HD 141569 A is a pre-main sequence B9.5 Ve star surrounded by a prominent and complex circumstellar disk, likely still in a transition stage from protoplanetary to debris disk phase. Here, we present a new image of the third inner disk component of HD 141569 A made in the L' band (3.8 micron) during the commissioning of the vector vortex coronagraph recently installed in the near-infrared imager and spectrograph NIRC2 behind the W.M. Keck Observatory Keck II adaptive optics system. We used reference point spread function subtraction, which reveals the innermost disk component from the inner working distance of $\simeq 23$ AU and up to $\simeq 70$ AU. The spatial scale of our detection roughly corresponds to the optical and near-infrared scattered light, thermal Q, N and 8.6 micron PAH emission reported earlier. We also see an outward progression in dust location from the L'-band to the H-band (VLT/SPHERE image) to the visible (HST/STIS image), likely indicative of dust blowout. The warm disk component is nested deep inside the two outer belts imaged by HST NICMOS in 1999 (respectively at 406 and 245 AU). We fit our new L'-band image and spectral energy distribution of HD 141569 A with the radiative transfer code MCFOST. Our best-fit models favor pure olivine grains, and are consistent with the composition of the outer belts. While our image shows a putative very-faint point-like clump or source embedded in the inner disk, we did not detect any true companion within the gap between the inner disk and the first outer ring, at a sensitivity of a few Jupiter masses.

astro-ph.SR↗

arXiv2016

Discovery of a low-mass companion inside the debris ring surrounding the F5V star HD206893

Uncovering the ingredients and the architecture of planetary systems is a very active field of research that has fuelled many new theories on giant planet formation, migration, composition, and interaction with the circumstellar environment. We aim at discovering and studying new such systems, to further expand our knowledge of how low-mass companions form and evolve. We obtained high-contrast H-band images of the circumstellar environment of the F5V star HD206893, known to host a debris disc never detected in scattered light. These observations are part of the SPHERE High Angular Resolution Debris Disc Survey (SHARDDS) using the InfraRed Dual-band Imager and Spectrograph (IRDIS) installed on VLT/SPHERE. We report the detection of a source with a contrast of 3.6x10^{-5} in the H-band, orbiting at a projected separation of 270 milliarcsecond or 10 au, corresponding to a mass in the range 24 to 73 Mjup for an age of the system in the range 0.2 to 2 Gyr. The detection was confirmed ten months later with VLT/NaCo, ruling out a background object with no proper motion. A faint extended emission compatible with the disc scattered light signal is also observed. The detection of a low-mass companion inside a massive debris disc makes this system an analog of other young planetary systems such as beta Pictoris, HR8799 or HD95086 and requires now further characterisation of both components to understand their interactions.

astro-ph.EP↗

arXiv2016

Optimizing the subwavelength grating of L-band Annular Groove Phase Masks for high coronagraphic performance

Context. The Annular Groove Phase Mask (AGPM) is one possible implementation of the vector vortex coronagraph, where the helical phase ramp is produced by a concentric subwavelength grating. For several years, we have been manufacturing AGPMs by etching gratings into synthetic diamond substrates using inductively coupled plasma etching. Aims. We aim to design, fabricate, optimize, and evaluate new L-band AGPMs that reach the highest possible coronagraphic performance, for applications in current and forthcoming infrared high-contrast imagers. Methods. Rigorous coupled wave analysis (RCWA) is used for designing the subwavelength grating of the phase mask. Coronagraphic performance evaluation is performed on a dedicated optical test bench. The experimental results of the performance evaluation are then used to accurately determine the actual profile of the fabricated gratings, based on RCWA modeling. Results. The AGPM coronagraphic performance is very sensitive to small errors in etch depth and grating profile. Most of the fabricated components therefore show moderate performance in terms of starlight rejection (a few 100:1 in the best cases). Here we present new processes for re-etching the fabricated components in order to optimize the parameters of the grating and hence significantly increase their coronagraphic performance. Starlight rejection up to 1000:1 is demonstrated in a broadband L filter on the coronagraphic test bench, which corresponds to a raw contrast of about 1e-5 at two resolution elements from the star for a perfect input wave front on a circular, unobstructed aperture. Conclusions. Thanks to their exquisite performance, our latest L-band AGPMs are good candidates for installation in state-of-the-art and future high-contrast thermal infrared imagers, such as METIS for the E-ELT.

astro-ph.IM↗

arXiv2016

Three years of harvest with the vector vortex coronagraph in the thermal infrared

For several years, we have been developing vortex phase masks based on sub-wavelength gratings, known as Annular Groove Phase Masks. Etched onto diamond substrates, these AGPMs are currently designed to be used in the thermal infrared (ranging from 3 to 13 μm). Our AGPMs were first installed on VLT/NACO and VLT/VISIR in 2012, followed by LBT/LMIRCam in 2013 and Keck/NIRC2 in 2015. In this paper, we review the development, commissioning, on-sky performance, and early scientific results of these new coronagraphic modes and report on the lessons learned. We conclude with perspectives for future developments and applications.

astro-ph.IM↗

arXiv2016

The VORTEX coronagraphic test bench

In this paper, we present the infrared coronagraphic test bench of the University of Liège named VODCA (Vortex Optical Demonstrator for Coronagraphic Applications). The goal of the bench is to assess the performances of the Annular Groove Phase Masks (AGPMs) at near- to mid-infrared wavelengths. The AGPM is a subwavelength grating vortex coronagraph of charge two (SGVC2) made out of diamond. The bench is designed to be completely achromatic and will be composed of a super continuum laser source emitting in the near to mid-infrared, several parabolas, diaphragms and an infrared camera. This way, we will be able to test the different AGPMs in the M, L, K and H bands. Eventually, the bench will also allow the computation of the incident wavefront aberrations on the coronagraph. A reflective Lyot stop will send most of the stellar light to a second camera to perform low-order wavefront sensing. This second system coupled with a deformable mirror will allow the correction of the wavefront aberrations. We also aim to test other pre- and/or post-coronagraphic concepts such as optimal apodization.

astro-ph.IM↗

arXiv2016

Mid-IR AGPMs for ELT applications

The mid-infrared region is well suited for exoplanet detection thanks to the reduced contrast between the planet and its host star with respect to the visible and near-infrared wavelength regimes. This contrast may be further improved with Vector Vortex Coronagraphs (VVCs), which allow us to cancel the starlight. One flavour of the VVC is the AGPM (Annular Groove Phase Mask), which adds the interesting properties of subwavelength gratings (achromaticity, robustness) to the already known properties of the VVC. In this paper, we present the optimized designs, as well as the expected performances of mid-IR AGPMs etched onto synthetic diamond substrates, which are considered for the E-ELT/METIS instrument.

astro-ph.IM↗

arXiv2015

Development of an ELT XAO testbed using a Mach-Zehnder wavefront sensor: calibration of the deformable mirror

(abridged) Extreme adaptive optics (XAO) encounters severe difficulties to cope with the high speed (>1kHz), high accuracy and high order requirements for future extremely large telescopes. An innovative high order adaptive optics system using a self-referenced Mach-Zehnder wavefront sensor (MZWFS) allows counteracting these limitations. This sensor estimates very accurately the wavefront phase at small spatial scale by measuring intensity differences between two outputs, with a $λ/4$ path length difference between its two legs, but is limited in dynamic range due to phase ambiguity. During the past few years, such an XAO system has been studied by our team in the framework of 8-meter class telescopes. In this work, we report on our latest results with the XAO testbed recently installed in our lab, and dedicated to high contrast imaging with 30m-class telescopes (such as the E-ELT or the TMT). After reminding the principle of a MZWFS and describing the optical layout of our experiment, we will show the results of the assessment of the woofer-tweeter phase correctors, i.e., a Boston Micromachine continuous membrane deformable mirror (DM) and a Boulder Nonlinear Systems liquid crystal spatial light modulator (SLM). In particular, we will detail the calibration of the DM using Zygo interferometer metrology. Our method consists in the precise measurement of the membrane deformation while applying a constant deformation to 9 out of 140 actuators at the same time. By varying the poke voltage across the DM operating range, we propose a simple but efficient way of modeling the DM influence function using a Gaussian model. Finally, we show the DM flattening on the MZWFS allowing to compensate for low order aberrations.

astro-ph.IM↗

arXiv2015

Lyot-plane phase masks for improved high-contrast imaging with a vortex coronagraph

The vortex coronagraph is an optical instrument that precisely removes on-axis starlight allowing for high contrast imaging at small angular separation from the star, thereby providing a crucial capability for direct detection and characterization of exoplanets and circumstellar disks. Telescopes with aperture obstructions, such as secondary mirrors and spider support structures, require advanced coronagraph designs to provide adequate starlight suppression. We introduce a phase-only Lyot-plane optic to the vortex coronagraph that offers improved contrast performance on telescopes with complicated apertures. Potential solutions for the European Extremely Large Telescope (E-ELT) are described and compared. Adding a Lyot-plane phase mask relocates residual starlight away from a region of the image plane thereby reducing stellar noise and improving sensitivity to off-axis companions. The phase mask is calculated using an iterative phase retrieval algorithm. Numerically, we achieve a contrast on the order of $10^{-6}$ for a companion with angular displacement as small as $4~λ/D$ with an E-ELT type aperture. Even in the presence of aberrations, improved performance is expected compared to either a conventional vortex coronagraph or optimized pupil plane phase element alone.

astro-ph.IM↗

arXiv2015

Optimized focal and pupil plane masks for vortex coronagraphs on telescopes with obstructed apertures

We present methods for optimizing pupil and focal plane optical elements that improve the performance of vortex coronagraphs on telescopes with obstructed or segmented apertures. Phase-only and complex masks are designed for the entrance pupil, focal plane, and the plane of the Lyot stop. Optimal masks are obtained using both analytical and numerical methods. The latter makes use of an iterative error reduction algorithm to calculate "correcting" optics that mitigate unwanted diffraction from aperture obstructions. We analyze the achieved performance in terms of starlight suppression, contrast, off-axis image quality, and chromatic dependence. Manufacturing considerations and sensitivity to aberrations are also discussed. This work provides a path to joint optimization of multiple coronagraph planes to maximize sensitivity to exoplanets and other faint companions.

astro-ph.IM↗

arXiv2014

Development of a subwavelength grating vortex coronagraph of topological charge 4 (SGVC4)

One possible solution to achieve high contrast direct imaging at a small inner working angle (IWA) is to use a vector vortex coronagraph (VVC), which provides a continuous helical phase ramp in the focal plane of the telescope with a phase singularity in its center. Such an optical vortex is characterized by its topological charge, i.e., the number of times the phase accumulates 2π radians along a closed path surrounding the singularity. Over the past few years, we have been developing a charge-2 VVC induced by rotationally symmetric subwavelength gratings (SGVC2), also known as the Annular Groove Phase Mask (AGPM). Since 2013, several SGVC2s (or AGPMs) were manufactured using synthetic diamond substrate, then validated on dedicated optical benches, and installed on 10-m class telescopes. Increasing the topological charge seems however mandatory for cancelling the light of bright stars which will be partially resolved by future Extremely Large Telescopes in the near-infrared. In this paper, we first detail our motivations for developing an SGVC4 (charge 4) dedicated to the near-infrared domain. The challenge lies in the design of the pattern which is unrealistic in the theoretically perfect case, due to state-of-the-art manufacturing limitations. Hence, we propose a new realistic design of SGVC4 with minimized discontinuities and optimized phase ramp, showing conclusive improvements over previous works in this field. A preliminary validation of our concept is given based on RCWA simulations, while full 3D finite-difference time-domain simulations (and eventually laboratory tests) will be required for a final validation.

astro-ph.IM↗