arXiv subjects

Christian Herglotz

Publications and source records attributed to Christian Herglotz.

At least 55 records · Page 3Linked to original sources

arXiv2023

Power Modeling for Virtual Reality Video Playback Applications

This paper proposes a method to evaluate and model the power consumption of modern virtual reality playback and streaming applications on smartphones. Due to the high computational complexity of the virtual reality processing toolchain, the corresponding power consumption is very high, which reduces operating times of battery-powered devices. To tackle this problem, we analyze the power consumption in detail by performing power measurements. Furthermore, we construct a model to estimate the true power consumption with a mean error of less than 3.5%. The model can be used to save power at critical battery levels by changing the streaming video parameters. Particularly, the results show that the power consumption is significantly reduced by decreasing the input video resolution.

eess.IV↗

arXiv2023

Encoder Complexity Control in SVT-AV1 by Speed-Adaptive Preset Switching

Current developments in video encoding technology lead to continuously improving compression performance but at the expense of increasingly higher computational demands. Regarding the online video traffic increases during the last years and the concomitant need for video encoding, encoder complexity control mechanisms are required to restrict the processing time to a sufficient extent in order to find a reasonable trade-off between performance and complexity. We present a complexity control mechanism in SVT-AV1 by using speed-adaptive preset switching to comply with the remaining time budget. This method enables encoding with a user-defined time constraint within the complete preset range with an average precision of 8.9 \% without introducing any additional latencies.

eess.IV↗

arXiv2023

Processing Energy Modeling for Neural Network Based Image Compression

Nowadays, the compression performance of neural-networkbased image compression algorithms outperforms state-of-the-art compression approaches such as JPEG or HEIC-based image compression. Unfortunately, most neural-network based compression methods are executed on GPUs and consume a high amount of energy during execution. Therefore, this paper performs an in-depth analysis on the energy consumption of state-of-the-art neural-network based compression methods on a GPU and show that the energy consumption of compression networks can be estimated using the image size with mean estimation errors of less than 7%. Finally, using a correlation analysis, we find that the number of operations per pixel is the main driving force for energy consumption and deduce that the network layers up to the second downsampling step are consuming most energy.

eess.IV↗

arXiv2023

Motion Plane Adaptive Motion Modeling for Spherical Video Coding in H.266/VVC

Motion compensation is one of the key technologies enabling the high compression efficiency of modern video coding standards. To allow compression of spherical video content, special mapping functions are required to project the video to the 2D image plane. Distortions inevitably occurring in these mappings impair the performance of classical motion models. In this paper, we propose a novel motion plane adaptive motion modeling technique (MPA) for spherical video that allows to perform motion compensation on different motion planes in 3D space instead of having to work on the - in theory arbitrarily mapped - 2D image representation directly. The integration of MPA into the state-of-the-art H.266/VVC video coding standard shows average Bjøntegaard Delta rate savings of 1.72\% with a peak of 3.37\% based on PSNR and 1.55\% with a peak of 2.92\% based on WS-PSNR compared to VTM-14.2.

eess.IV↗

arXiv2023

Video Decoding Energy Reduction Using Temporal-Domain Filtering

In this paper, we study decoding energy reduction opportunities using temporal-domain filtering and subsampling methods. In particular, we study spatiotemporal filtering using a contrast sensitivity function and temporal downscaling, i.e., frame rate reduction. We apply these concepts as a pre-filtering to the video before compression and evaluate the bitrate, the decoding energy, and the visual quality with a dedicated metric targeting temporally down-scaled sequences. We find that decoding energy savings yield 35% when halving the frame rate and that spatiotemporal filtering can lead to up to 5% of additional savings, depending on the content.

eess.IV↗

arXiv2023

Power Reduction Opportunities on End-User Devices in Quality-Steady Video Streaming

This paper uses a crowdsourced dataset of online video streaming sessions to investigate opportunities to reduce the power consumption while considering QoE. For this, we base our work on prior studies which model both the end-user's QoE and the end-user device's power consumption with the help of high-level video features such as the bitrate, the frame rate, and the resolution. On top of existing research, which focused on reducing the power consumption at the same QoE optimizing video parameters, we investigate potential power savings by other means such as using a different playback device, a different codec, or a predefined maximum quality level. We find that based on the power consumption of the streaming sessions from the crowdsourcing dataset, devices could save more than 55% of power if all participants adhere to low-power settings.

eess.IV↗

arXiv2023

Learning Frequency-Specific Quantization Scaling in VVC for Standard-Compliant Task-driven Image Coding

Today, visual data is often analyzed by a neural network without any human being involved, which demands for specialized codecs. For standard-compliant codec adaptations towards certain information sinks, HEVC or VVC provide the possibility of frequency-specific quantization with scaling lists. This is a well-known method for the human visual system, where scaling lists are derived from psycho-visual models. In this work, we employ scaling lists when performing VVC intra coding for neural networks as information sink. To this end, we propose a novel data-driven method to obtain optimal scaling lists for arbitrary neural networks. Experiments with Mask R-CNN as information sink reveal that coding the Cityscapes dataset with the proposed scaling lists result in peak bitrate savings of 8.9 % over VVC with constant quantization. By that, our approach also outperforms scaling lists optimized for the human visual system. The generated scaling lists can be found under https://github.com/FAU-LMS/VCM_scaling_lists.

eess.IV↗

arXiv2022

3-D mesh compensated wavelet lifting for 3-D+t medical CT data

For scalable coding, a high quality of the lowpass band of a wavelet transform is crucial when it is used as a downscaled version of the original signal. However, blur and motion can lead to disturbing artifacts. By incorporating feasible compensation methods directly into the wavelet transform, the quality of the lowpass band can be improved. The displacement in dynamic medical 3-D+t volumes from Computed Tomography is mainly given by expansion and compression of tissue over time and can be modeled well by mesh-based methods. We extend a 2-D mesh-based compensation method to three dimensions to obtain a volume compensation method that can additionally compensate deforming displacements in the third dimension. We show that a 3-D mesh can obtain a higher quality of the lowpass band by 0.28 dB with less than 40% of the model parameters of a comparable 2-D mesh. Results from lossless coding with JPEG 2000 3D and SPECK3D show that the compensated subbands using a 3-D mesh need about 6% less data compared to using a 2-D mesh.

eess.IV↗

arXiv2022

Modeling of Energy Consumption and Streaming Video QoE using a Crowdsourcing Dataset

In the past decade, we have witnessed an enormous growth in the demand for online video services. Recent studies estimate that nowadays, more than 1% of the global greenhouse gas emissions can be attributed to the production and use of devices performing online video tasks. As such, research on the true power consumption of devices and their energy efficiency during video streaming is highly important for a sustainable use of this technology. At the same time, over-the-top providers strive to offer high-quality streaming experiences to satisfy user expectations. Here, energy consumption and QoE partly depend on the same system parameters. Hence, a joint view is needed for their evaluation. In this paper, we perform a first analysis of both end-user power efficiency and Quality of Experience of a video streaming service. We take a crowdsourced dataset comprising 447,000 streaming events from YouTube and estimate both the power consumption and perceived quality. The power consumption is modeled based on previous work which we extended towards predicting the power usage of different devices and codecs. The user-perceived QoE is estimated using a standardized model. Our results indicate that an intelligent choice of streaming parameters can optimize both the QoE and the power efficiency of the end user device. Further, the paper discusses limitations of the approach and identifies directions for future research.

eess.IV↗

arXiv2022

Sweet Streams are Made of This: The System Engineer's View on Energy Efficiency in Video Communications

In recent years, the global use of online video services has increased rapidly. Today, a manifold of applications, such as video streaming, video conferencing, live broadcasting, and social networks, make use of this technology. A recent study found that the development and the success of these services had as a consequence that, nowadays, more than 1% of the global greenhouse-gas emissions are related to online video, with growth rates close to 10% per year. This article reviews the latest findings concerning energy consumption of online video from the system engineer's perspective, where the system engineer is the designer and operator of a typical online video service. We discuss all relevant energy sinks, highlight dependencies with quality-of-service variables as well as video properties, review energy consumption models for different devices from the literature, and aggregate these existing models into a global model for the overall energy consumption of a generic online video service. Analyzing this model and its implications, we find that end-user devices and video encoding have the largest potential for energy savings. Finally, we provide an overview of recent advances in energy efficiency improvement for video streaming and propose future research directions for energy-efficient video streaming services.

eess.IV↗

arXiv2022

Decoding Energy Modeling For Versatile Video Coding

In previous research, it was shown that the software decoding energy demand of High Efficiency Video Coding (HEVC) can be reduced by 15$\%$ by using a decoding-energy-rate-distortion optimization algorithm. To achieve this, the energy demand of the decoder has to be modeled by a bit stream feature-based model with sufficiently high accuracy. Therefore, we propose two bit stream feature-based models for the upcoming Versatile Video Coding (VVC) standard. The newly introduced models are compared with models from literature, which are used for HEVC. An evaluation of the proposed models reveals that the mean estimation error is similar to the results of the literature and yields an estimation error of 1.85% with 10-fold cross-validation.

eess.IV↗

arXiv2022

A Comparative Analysis of the Time and Energy Demand of Versatile Video Coding and High Efficiency Video Coding Reference Decoders

This paper investigates the decoding energy and decoding time demand of VTM-7.0 in relation to HM-16.20. We present the first detailed comparison of two video codecs in terms of software decoder energy consumption. The evaluation shows that the energy demand of the VTM decoder is increased significantly compared to HM and that the increase depends on the coding configuration. For the coding configuration randomaccess, we find that the decoding energy is increased by over 80% at a decoding time increase of over 70%. Furthermore, results indicate that the energy demand increases by up to 207% when Single Instruction Multiple Data (SIMD) instructions are disabled, which corresponds to the HM implementation style. By measurements, it is revealed that the coding tools MIP, AMVR, TPM, LFNST, and MTS increase the energy efficiency of the decoder. Furthermore, we propose a new coding configuration based on our analysis, which reduces the energy demand of the VTM decoder by over 17% on average.

eess.IV↗

arXiv2022

Extending Video Decoding Energy Models for 360° and HDR Video Formats in HEVC

Research has shown that decoder energy models are helpful tools for improving the energy efficiency in video playback applications. For example, an accurate feature-based bit stream model can reduce the energy consumption of the decoding process. However, until now only sequences of the SDR video format were investigated. Therefore, this paper shows that the decoding energy of HEVC-coded bit streams can be estimated precisely for different video formats and coding bit depths. Therefore, we compare a state-of-the-art model from the literature with a proposed model. We show that bit streams of the 360°, HDR, and fisheye video format can be estimated with a mean estimation error lower than 3.88% if the setups have the same coding bit depth. Furthermore, it is shown that on average, the energy demand for the decoding of bit streams with a bit depth of 10-bit is 55% higher than with 8-bit.

eess.IV↗

arXiv2022

Advanced Design Space Exploration for Joint Energy and Quality Optimization for VVC

In recent studies, it could be shown that the energy demand of Versatile Video Coding (VVC) decoders can be twice as high as comparable High Efficiency Video Coding (HEVC) decoders. A significant part of this increase in complexity is attributed to the usage of new coding tools. By using a design space exploration algorithm, it was shown that the energy demand of VVC-coded sequences could be reduced if different coding tool profiles were used for the encoding process. This work extends the algorithm with several optimization strategies, methodological adjustments to optimize perceptual quality, and a new minimization criterion. As a result, we significantly improve the Pareto front, and the rate-distortion and energy efficiency of the state-of-the-art design space exploration. Therefore, we show an energy demand reduction of up to 47% with less than 30% additional bit rate, or a reduction of over 35% with approximately 6% additional bit rate.

eess.IV↗

arXiv2022

Matched Quality Evaluation of Temporally Downsampled Videos with Non-Integer Factors

Recent research has shown that temporal downsampling of high-frame-rate sequences can be exploited to improve the rate-distortion performance in video coding. However, until now, research only targeted downsampling factors of powers of two, which greatly restricts the potential applicability of temporal downsampling. A major reason is that traditional, objective quality metrics such as peak signal-to-noise ratio or more recent approaches, which try to mimic subjective quality, can only be evaluated between two sequences whose frame rate ratio is an integer value. To relieve this problem, we propose a quality evaluation method that allows calculating the distortion between two sequences whose frame rate ratio is fractional. The proposed method can be applied to any full-reference quality metric.

eess.IV↗

arXiv2022

Motion-Plane-Adaptive Inter Prediction in 360-Degree Video Coding

Inter prediction is one of the key technologies enabling the high compression efficiency of modern video coding standards. 360-degree video needs to be mapped to the 2D image plane prior to coding in order to allow compression using existing video coding standards. The distortions that inevitably occur when mapping spherical data onto the 2D image plane, however, impair the performance of classical inter prediction techniques. In this paper, we propose a motion-plane-adaptive inter prediction technique (MPA) for 360-degree video that takes the spherical characteristics of 360-degree video into account. Based on the known projection format of the video, MPA allows to perform inter prediction on different motion planes in 3D space instead of having to work on the - in theory arbitrarily mapped - 2D image representation directly. We furthermore derive a motion-plane-adaptive motion vector prediction technique (MPA-MVP) that allows to translate motion information between different motion planes and motion models. Our proposed integration of MPA together with MPA-MVP into the state-of-the-art H.266/VVC video coding standard shows significant Bjontegaard Delta rate savings of 1.72% with a peak of 3.97% based on PSNR and 1.56% with a peak of 3.40% based on WS-PSNR compared to the VTM-14.2 baseline on average.

eess.IV↗

arXiv2022

Optimized Decoding-Energy-Aware Encoding in Practical VVC Implementations

The optimization of the energy demand is crucial for modern video codecs. Previous studies show that the energy demand of VVC decoders can be improved by more than 50% if specific coding tools are disabled in the encoder. However, those approaches increase the bit rate by over 20% if the concept is applied to practical encoder implementations such as VVenC. Therefore, in this work, we investigate VVenC and study possibilities to reduce the additional bit rate, while still achieving low-energy decoding at reasonable encoding times. We show that encoding using our proposed coding tool profiles, the decoding energy efficiency is improved by over 25% with a bit rate increase of less than 5% with respect to standard encoding. Furthermore, we propose a second coding tool profile targeting maximum energy savings, which achieves 34% of energy savings at bitrate increases below 15%.

eess.IV↗

arXiv2022

Beyond Bjøntegaard: Limits of Video Compression Performance Comparisons

For 20 years, the gold standard to evaluate the performance of video codecs is to calculate average differences between ratedistortion curves, also called the "Bjøntegaard Delta". With the help of this tool, the compression performance of codecs can be compared. In the past years, we could observe that the calculus was also deployed for other metrics than bitrate and distortion in terms of peak signal-to-noise ratio, for example other quality metrics such as video multi-method assessment fusion or hardware-dependent metrics such as the decoding energy. However, it is unclear whether the Bjøntegaard Delta is a valid way to evaluate these metrics. To this end, this paper reviews several interpolation methods and evaluates their accuracy using different performancemetrics. As a result, we propose to use a novel approach based on Akima interpolation, which returns the most accurate results for a large variety of performance metrics. The approximation accuracy of this new method is determined to be below a bound of 1.5%.

eess.IV↗