arXiv subjects

Christian Holm

Publications and source records attributed to Christian Holm.

At least 55 records · Page 3Linked to original sources

arXiv2021

A Numerical Investigation of Analyte Size Effects in Nanopore Sensing Systems

We investigate the ionic current modulation in DNA nanopore translocation setups by numerically solving the electrokinetic mean-field equations for an idealized model. Specifically, we study the dependence of the ionic current on the relative length of the translocating molecule. Our simulations show a significantly smaller ionic current for DNA molecules that are shorter than the pore at low salt concentrations. These effects can be ascribed to the polarization of the ion cloud along the DNA that leads to an opposing electric dipole field. Our results for DNA shine light on the observed discrepancy between infinite pore models and experimental data on various sized DNA complexes.

cond-mat.soft↗

arXiv2020

The Influence of Motility on Bacterial Accumulation in a Microporous Channel

We study the transport of bacteria in a porous media modeled by a square channel containing one cylindrical obstacle via molecular dynamics simulations coupled to a lattice Boltzmann fluid. Our bacteria model is a rod-shaped rigid body which is propelled by a force-free mechanism. To account for the behavior of living bacteria, the model also incorporates a run-and-tumble process. The model bacteria are capable of hydrodynamically interacting with both of the channel walls and the obstacle. This enables the bacteria to get reoriented when experiencing a shear-flow. We demonstrate that this model is capable of reproducing the bacterial accumulation on the rear side of an obstacle, as has recently been experimentally observed by [G. L. Mino, et al., Advances in Microbiology 8, 451 (2018)] using E.coli bacteria. By systematically varying the external flow strength and the motility of the bacteria, we resolve the interplay between the local flow strength and the swimming characteristics that lead to the accumulation. Moreover, by changing the geometry of the channel, we also reveal the important role of the interactions between the bacteria and the confining walls for the accumulation process.

cond-mat.soft↗

arXiv2020

Modeling the Current Modulation of Bundled DNA Structures in Nanopores

We investigate the salt-dependent current modulation of bundled DNA nanostructures in a nanopore. To this end, we developed four simulation models for a 2x2 origami structure with increasing level of detail: from the mean-field level to an all-atom representation of the DNA structure. We observe a consistent pore conductivity as a function of salt concentration for all four models. However, a comparison of our data to recent experimental investigations on similar systems displays significant deviations. We discuss possible reasons for the discrepancies and propose extensions to our models for future investigations.

cond-mat.soft↗

arXiv2020

An extensible lattice Boltzmann method for viscoelastic flows: complex and moving boundaries in Oldroyd-B fluids

Most biological fluids are viscoelastic, meaning that they have elastic properties in addition to the dissipative properties found in Newtonian fluids. Computational models can help us understand viscoelastic flow, but are often limited in how they deal with complex flow geometries and suspended particles. Here, we present a lattice Boltzmann solver for Oldroyd-B fluids that can handle arbitrarily-shaped fixed and moving boundary conditions, which makes it ideally suited for the simulation of confined colloidal suspensions. We validate our method using several standard rheological setups, and additionally study a single sedimenting colloid, also finding good agreement with literature. Our approach can readily be extended to constitutive equations other than Oldroyd-B. This flexibility and the handling of complex boundaries holds promise for the study of microswimmers in viscoelastic fluids.

physics.flu-dyn↗

arXiv2020

Frequency-dependent magnetic susceptibility of magnetic nanoparticles in a polymer solution: a simulation study

Magnetic composite materials i.e. elastomers, polymer gels, or polymer solutions with embedded magnetic nanoparticles are useful for many technical and bio-medical applications. However, the microscopic details of the coupling mechanisms between the magnetic properties of the particles and the mechanical properties of the (visco)elastic polymer matrix remain unresolved. Here we study the response of a single-domain spherical magnetic nanoparticle that is suspended in a polymer solution to alternating magnetic fields. As interactions we consider only excluded volume interactions with the polymers and hydrodynamic interactions mediated through the solvent. The AC susceptibility spectra are calculated using a linear response Green-Kubo approach, and the influences of changing polymer concentration and polymer length are investigated. Our data is compared to recent measurements of the AC susceptibility for a typical magnetic composite system [Roeben et al., Colloid and Polymer Science, 2014, 2013--2023], and demonstrates the importance of hydrodynamic coupling in such systems.

cond-mat.soft↗

arXiv2019

Cell Model Approaches for Predicting the Swelling and Mechanical Properties of Polyelectrolyte Gels

We present two successive mean-field approximations for describing the mechanical properties and the swelling equilibrium of polyelectrolyte gels in contact with a salt solution. The first mean-field approximation reduces the many-chain problem of a gel to a corresponding single chain problem. The second mean-field step integrates out the degrees of freedom of the flexible chain and the ions. It replaces the particle-based description of the polyelectrolyte with suitable charge distributions and an effective elasticity term. These simplifications result in a computationally very efficient Poisson-Boltzmann cell-gel description. Despite their simplicity, the single chain cell-gel model shows excellent and the PB model very good agreement with explicit molecular dynamics simulations of the reference periodic monodisperse network model for varying chain length, polymer charge fraction, and external reservoir salt concentrations. Comparisons of our models to the Katchalsky model reveal that our approach is superior for strongly charged chains and can also predict the bulk moduli more accurately. We further discuss chain length polydispersity effects, investigate changes in the solvent permittivity, and demonstrate the robustness of our approach to parameter variations coming from several modeling assumptions.

cond-mat.soft↗

arXiv2019

Atomistic simulation of PDADMAC/PSS oligoelectrolyte multilayers: overall comparison of tri- and tetra-layer systems

By employing large-scale molecular dynamics simulations of atomistically resolved oligoelectrolytes in aqueous solutions, we study in detail the first four layer-by-layer deposition cycles of an oligoelectrolyte multilayer made of poly(diallyl dimethyl ammonium chloride)/poly(styrene sulfonate sodium salt) (PDADMAC/PSS). The multilayers are grown on a silica substrate in 0.1M {NaCl} electrolyte solutions and the swollen structures are then subsequently exposed to varying added salt concentration. We investigated the microscopic properties of the films, analyzing in detail the differences between three- and four-layers systems. Our simulations provide insights on the early stages of growth of a multilayer, which are particularly challenging for experimental observations. We found a rather strong entanglement of the oligoelectrolytes, with a fuzzy layering of the film structure. The main charge compensation mechanism is for all cases intrinsic, whereas extrinsic compensation is relatively ehanced for the layer of the last deposition cycle. In addition, we quantified other fundamental observables of these systems, as the film thickness, water uptake, and overcharge fractions for each deposition layer.

cond-mat.soft↗

arXiv2019

Machine Learning Inter-Atomic Potentials Generation Driven by Active Learning: A Case Study for Amorphous and Liquid Hafnium dioxide

We propose a novel active learning scheme for automatically sampling a minimum number of uncorrelated configurations for fitting the Gaussian Approximation Potential (GAP). Our active learning scheme consists of an unsupervised machine learning (ML) scheme coupled to Bayesian optimization technique that evaluates the GAP model. We apply this scheme to a Hafnium dioxide (HfO2) dataset generated from a melt-quench ab initio molecular dynamics (AIMD) protocol. Our results show that the active learning scheme, with no prior knowledge of the dataset is able to extract a configuration that reaches the required energy fit tolerance. Further, molecular dynamics (MD) simulations performed using this active learned GAP model on 6144-atom systems of amorphous and liquid state elucidate the structural properties of HfO2 with near ab initio precision and quench rates (i.e. 1.0 K/ps) not accessible via AIMD. The melt and amorphous x-ray structural factors generated from our simulation are in good agreement with experiment. Additionally, the calculated diffusion constants are in good agreement with previous ab initio studies.

cond-mat.mtrl-sci↗

arXiv2019

Hydrodynamic Mobility Reversal of Squirmers near Flat and Curved Surfaces

Self-propelled particles have been experimentally shown to orbit spherical obstacles and move along surfaces. Here, we theoretically and numerically investigate this behavior for a hydrodynamic squirmer interacting with spherical objects and flat walls using three different methods of approximately solving the Stokes equations: The method of reflections, which is accurate in the far field; lubrication theory, which describes the close-to-contact behavior; and a lattice Boltzmann solver that accurately accounts for near-field flows. The method of reflections predicts three distinct behaviors: orbiting/sliding, scattering, and hovering, with orbiting being favored for lower curvature as in the literature. Surprisingly, it also shows backward orbiting/sliding for sufficiently strong pushers, caused by fluid recirculation in the gap between the squirmer and the obstacle leading to strong forces opposing forward motion. Lubrication theory instead suggests that only hovering is a stable point for the dynamics. We therefore employ lattice Boltzmann to resolve this discrepancy and we qualitatively reproduce the richer far-field predictions. Our results thus provide insight into a possible mechanism of mobility reversal mediated solely through hydrodynamic interactions with a surface.

cond-mat.soft↗

arXiv2019

Modeling Gel Swelling Equilibrium in Mean-Field: From explicit Models to Poisson-Boltzmann

We develop a double mean-field theory for charged macrogels immersed in electrolyte solutions in the spirit of the cell model approach. We first demonstrate that the equilibrium sampling of a single explicit coarse-grained charged polymer in a cell yields accurate predictions of the swelling equilibrium if the geometry is suitably chosen and all pressure contributions have been incorporated accurately. We then replace the explicit flexible chain by a suitably modeled penetrable charged rod that allows to compute all pressure terms within the Poisson-Boltzmann approximation. This model, albeit computationally cheap, yields excellent predictions of swelling equilibria under varying chain length, polymer charge fraction, and external reservoir salt concentrations when compared to coarse-grained molecular dynamics simulations of charged macrogels. We present an extension of the model to the experimentally relevant cases of pH-sensitive gels.

cond-mat.soft↗

arXiv2019

A Computational Model for Bacterial Run-and-Tumble Motion

In our article we present a computational model for the simulation of self-propelled anisotropic bacteria. To this end we use a self-propelled particle model and augment it with a statistical algorithm for the run-and-tumble motion. We derive an equation for the distribution of reorientations of the bacteria that we use to analyze the statistics of the random walk and that allows us to tune the behavior of our model to the characteristics of an E.coli bacterium. We validate our implementation in terms of a single swimmer and demonstrate that our model is capable of reproducing E.coli's run-and-tumble motion with excellent accuracy.

cond-mat.soft↗

arXiv2019

A Lattice Boltzmann Model for Squirmers

The squirmer is a simple yet instructive model for microswimmers, which employs an effective slip velocity on the surface of a spherical swimmer to describe its self-propulsion. We solve the hydrodynamic flow problem with the lattice Boltzmann (LB) method, which is well-suited for time-dependent problems involving complex boundary conditions. Incorporating the squirmer into LB is relatively straight-forward, but requires an unexpectedly fine grid resolution to capture the physical flow fields and behaviors accurately. We demonstrate this using four basic hydrodynamic tests: Two for the far-field flow---accuracy of the hydrodynamic moments and squirmer-squirmer interactions---and two that require the near field to be accurately resolved---a squirmer confined to a tube and one scattering off a spherical obstacle---which LB is capable of doing down to the grid resolution. We find good agreement with (numerical) results obtained using other hydrodynamic solvers in the same geometries and identify a minimum required resolution to achieve this reproduction. We discuss our algorithm in the context of other hydrodynamic solvers and present an outlook on its application to multi-squirmer problems.

physics.flu-dyn↗

arXiv2019

The effect of finite pore length on ion structure and charging

Nanoporous supercapacitors play an important role in modern energy storage systems, and their modeling is essential to predict and optimize the charging behaviour. Two classes of models have been developed that consist of finite and infinitely long pores. Here, we show that although both types of models predict qualitatively consistent results, there are important differences emerging due to the finite pore length. In particular, we find that the ion density inside a finite pore is not constant but increases linearly from the pore entrance to the pore end, where the ions form a strongly layered structure. This hinders a direct quantitative comparison between the two models. In addition, we show that although the ion density between the electrodes changes appreciably with the applied potential, this change has a minor effect on charging. Our simulations also reveal a complex charging behaviour, which is adsorption-driven at high voltages, but it is dominated either by co-ion desorption or by adsorption of both types of ions at low voltages, depending on the ion concentration.

cond-mat.soft↗

arXiv2018

ESPResSo 4.0 -- An Extensible Software Package for Simulating Soft Matter Systems

ESPResSo 4.0 is an extensible simulation package for research on soft matter. This versatile molecular dynamics program was originally developed for coarse-grained simulations of charged systems Limbach et al., Comput. Phys. Commun. 174, 704 (2006). The scope of the software has since broadened considerably: ESPResSo can now be used to simulate systems with length scales spanning from the molecular to the colloidal. Examples include, self-propelled particles in active matter, membranes in biological systems, and the aggregation of soot particles in process engineering. ESPResSo also includes solvers for hydrodynamic and electrokinetic problems, both on the continuum and on the explicit particle level. Since our last description of version 3.1 Arnold et al., Meshfree Methods for Partial Differential Equations VI, Lect. Notes Comput. Sci. Eng. 89, 1 (2013), the software has undergone considerable restructuring. The biggest change is the replacement of the Tcl scripting interface with a much more powerful Python interface. In addition, many new simulation methods have been implemented. In this article, we highlight the changes and improvements made to the interface and code, as well as the new simulation techniques that enable a user of ESPResSo 4.0 to simulate physics that is at the forefront of soft matter research.

cond-mat.soft↗

arXiv2018

Accelerating the calculation of dipolar interactions in particle based simulations with open boundary conditions by means of the P2NFFT method

Magnetic gels are soft elastic materials consisting of magnetic particles embedded in a polymer network. Their shape and elasticity can be controlled by an external magnetic field, which gives rise to both, engineering and biomedical applications. Computer simulations are a commonly used tool to study these materials. A well-known bottleneck of these simulations is the demanding calculation of dipolar interactions. Under periodic boundary conditions established algorithms are available for doing this, however, at the expense of restricting the way in which the gels can deform in an external magnetic field. Moreover, the magnetic properties depend on the sample shape, ruling out periodic boundary conditions entirely for some research questions. In this article we will employ the recently developed dipolar variant of the P$^2$NFFT method that is able to calculate dipolar interactions under open boundary conditions with an $N \log N$ scaling in the number of particles, rather than the expensive $N^2$ scaling of a direct summation of pair forces. The dipolar P$^2$NFFT method has been implemented within the ScaFaCoS library. The molecular dynamics software ESPResSo has been extended to make use of the library. After a short summary of the method, we will discuss its value for studying magnetic soft matter systems. A particular focus is put on developing a tuning strategy to reach the best performance of the method at a predefined accuracy, and lastly applying the method to a magnetic gel model. Here, adapting to the gel's change in shape during the course of a simulation is of particular interest.

cond-mat.soft↗

arXiv2017

A new integral representation for the Riemann Zeta function

A new integral representation for the Riemann zeta function is derived. This representation covers the important region of the complex plane where the real part of the argument of the function lies between 0 and 1. Using this representation, we obtain new functional identities for the Riemann zeta function.

math.NT↗

arXiv2017

Capacitance of Nanoporous Carbon-Based Supercapacitors is a Trade-Off Between the Concentration and the Separability of the Ions

Nanoporous carbon-based supercapacitors store electricity through adsorption of ions from the electrolyte at the surface of the electrodes. Room temperature ionic liquids, which show the largest ion concentrations among organic liquid electrolytes, should in principle yield larger capacitances. Here we show by using electrochemical measurements that the capacitance is not significantly affected when switching from a pure ionic liquid to a conventional organic electrolyte using the same ionic species. By performing additional molecular dynamics simulations, we interpret this result as an increasing difficulty of separating ions of opposite charges when they are more concentrated, i.e. in the absence of a solvent which screens the Coulombic interactions. The charging mechanism consistently changes with ion concentration, switching from counter-ion adsorption in the diluted organic electrolyte to ion exchange in the pure ionic liquid. Contrarily to the capacitance, in-pore diffusion coefficients largely depend on the composition, with a noticeable slowing of the dynamics in the pure ionic liquid.

cond-mat.mtrl-sci↗

arXiv2017

Interplay between particle microstructure, network topology and sample shape in magnetic gels -- A molecular dynamics simulation study

Ferrogels, i.e., hydrogels loaded with magnetic nanoparticles, have the ability to deform in external magnetic fields. The precise shape of deformation and the alignment of the gel in the field, however, depend on the interplay of several factors. In this paper, we introduce a coarse-grained simulation model, which takes into account the configuration of magnetic particles in the gel, the sample shape, and aspects of the polymer network topology. We use this model to show that in gels with an isotropic microstructure, an external magnetic field reduces clustering, while this is not the case for uniaxial gels, in which the particle configuration is anisotropic due to the presence of a magnetic field during cross-linking. For ellipsoidal gels, we find that a uniaxial microstructure additionally can override the deformation and alignment expected as indicated the demagnetization energy. Finally, we examine to what degree gels with different network topologies maintain the particle microstructure ``frozen in`` during the cross-linking process.

cond-mat.soft↗