arXiv subjects

Christian Kraglund Andersen

Publications and source records attributed to Christian Kraglund Andersen.

At least 19 recordsLinked to original sources

arXiv2026

Flip-chip integrated superconducting qubits using electroplated bump bonds

Flip-chip integration offers a promising route toward scalable superconducting quantum processors and hybrid semiconductor-superconductor quantum devices. We develop a three-dimensional transmon architecture using electroplated indium in which the qubit electric field is shared nearly equally between two bump-bonded substrates while maintaining low participation at the indium-bump interface. The resulting geometry is well suited for future hybrid qubits, enabling the integration of distinct material platforms while minimizing sensitivity to bump-interface loss. Using this platform, we evaluate electroplated indium interconnects for superconducting quantum circuits. Flip-chip transmons incorporating electroplated indium bumps exhibit qubit quality factors around $10^6$. In addition, a systematic study of coplanar-waveguide resonators is used to identify losses associated with the electroplating process. In particular, we find that surface losses associated with the gold-layer, used to enable good electric contact with the indium, is likely the primary contributor to the qubit decay rate. These results demonstrate the compatibility of electroplated indium technology with high-coherence superconducting circuits and establish a promising platform for three-dimensional hybrid quantum integration.

quant-ph↗

arXiv2026

Mixed spin-boson coupling for qubit readout with suppressed residual shot-noise dephasing

Direct dipole coupling between a two-level system and a bosonic mode describes the interactions present in a wide range of physical platforms. In this work, we study a coupling that is mixed between two pairs of quadratures of a bosonic mode and a spin. In this setting, we can suppress the dispersive shift while retaining a nonzero Kerr shift, which results in a quadratic relationship between shot-noise dephasing and thermal photons in the oscillator. We demonstrate this configuration with a simple toy model, quantify the expected improvements to photon shot-noise dephasing of the spin, and describe an approach to fast qubit readout via the Kerr shift. Further, we show how such a regime is achievable in superconducting circuits because magnetic and electric couplings can be of comparable strength, using two examples: the Cooper pair transistor and the fluxonium molecule.

quant-ph↗

arXiv2026

Experimental Characterization and Modeling of Measurement-Induced State-Transitions in a Fluxonium Superconducting Qubit

Superconducting qubits are most often measured using dispersive readout, which, ideally, implements a projective quantum non-demolition (QND) measurement. While a larger readout drive can increase the signal and, thus, reduce discrimination errors in the readout, strong microwave drives may also cause non-QND errors by driving the qubit to a state outside the computational subspace. In this work, we experimentally characterize measurement-induced state transitions (MIST) in a fluxonium qubit over its full external flux range. We further numerically calculate the MIST errors, and find that the theory accurately predicts eleven experimentally identified regions with increased MIST. In addition to transitions to higher fluxonium levels, we also find that, at certain flux points, MIST errors are dominated by transitions that include the transmission-line-like array modes of the fluxonium's superinductor. The excellent match between theory and experiment validates that the models accurately predict the occurrence of MIST in these systems, and further highlights the influence of array modes in fluxonium readout.

quant-ph↗

arXiv2026

Coherence limitations of a Fourier-engineered $\cos(2φ)$ transmon qubit

Intrinsically protected superconducting qubits are a promising route toward enhancing coherence times and advancing hardware towards applications in quantum computing. The $\cos(2φ)$ qubit achieves protection against qubit relaxation by allowing only the coherent tunneling of pairs of Cooper pairs, resulting in Cooper-pair parity symmetry and thereby suppressing charge-induced errors. In this work, we experimentally realize a $\cos(2φ)$ qubit by Fourier engineering the energy-phase relation in a multi-junction superconducting circuit. Using an interference-based architecture, we are able to suppress the odd harmonics of an effective qubit potential and we observe good agreement between the measured transition spectrum and the effective theoretical model. We further investigate the energy relaxation time as a function of external flux and find that the qubit lifetime at the flux symmetry point is limited by $1/f$ flux noise. This strong sensitivity arises from residual fluctuations in the first harmonic, which possesses a large prefactor despite being nominally canceled. In contrast, a fluxonium qubit with a similar energy spectrum and noise amplitude is less affected by flux noise, highlighting a key challenge for interference-based protection schemes.

quant-ph↗

arXiv2026

Exploration of Fluxonium Parameters for Capacitive Cross-Resonance Gates

We study the cross-resonance effect in capacitively-coupled fluxonium qubits and devise a simple formula for their maximum ZX interaction strength. By going beyond the perturbative regime, we find that a CNOT gate can generally be realized in under 200 ns with residual ZZ limited to 50 kHz, for fluxonium qubits with frequencies below 1 GHz. Our analysis relies on a semi-analytical method: we first numerically diagonalize the Floquet Hamiltonian of the strongly-driven control qubit and then perturbatively incorporate the weak qubit-qubit coupling to obtain an effective Hamiltonian. We also derive frequency collision windows around harmful control-target and control-spectator transitions. For large fluxonium devices, we predict a collision-free yield that is considerably less sensitive to junction variability compared to transmons in the same layout. These results support the viability of an all-fluxonium cross-resonance architecture with only capacitive couplings.

quant-ph↗

arXiv2026

Crosstalk in Multi-Qubit Fluxonium Architectures with Transmon Couplers

In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below $10^{-4}$ by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.

quant-ph↗

arXiv2026

Small Quantum Low Density Parity Check Codes for Near-Term Experiments

It is widely accepted that quantum error correction is essential for realizing large-scale fault-tolerant quantum computing. Recent experiments have demonstrated error correction codes operating below threshold, primarily using local planar codes such as the surface code and color code. In parallel, theoretical advances in quantum low-density parity-check (LDPC) codes promise significantly lower overheads, albeit at the cost of requiring non-local parity checks. While these results are encouraging, implementing such codes remains challenging for near-term experiments, creating obstacles to holistic benchmarking of hardware architectures capable of supporting long-range couplers. In this work, we present a simple construction recipe for small quantum LDPC codes based on recent developments in the field. Our codes are approximately twice as efficient as comparable surface codes, yet require only weight-four parity checks, which simplifies experimental realization compared to other quantum LDPC codes. We provide concrete proposals for implementations with superconducting qubits in flip-chip architectures and with semiconductor spin qubits using shuttling-based approaches.

quant-ph↗

arXiv2025

Novel qubits in hybrid semiconductor-superconductor nanostructures

Hybrid semiconductor-superconductor qubits have recently emerged as a promising alternative to traditional platforms, combining material advantages with device-level tunability. A defining feature is their gate-tunable Josephson coupling, enabling superconducting qubit architectures with full electric-field control and offering a path toward scalable, low-crosstalk quantum processors. This approach seeks to merge benefits of superconducting and semiconductor qubits, for instance by encoding quantum information in the spin of a quasiparticle occupying an Andreev bound state, thus combining long coherence times with fast, flexible control. Progress has accelerated through bottom-up engineering of Andreev states in coupled quantum dot arrays, leading to architectures such as minimal Kitaev chains hosting Majorana zero modes. In parallel, Hamiltonian-protected designs aim to enhance resilience against local noise and decoherence by exploiting superconducting phase dynamics and discrete charge or flux degrees of freedom. This article reviews recent theoretical and experimental advances in hybrid qubits, providing an overview of physical mechanisms, device implementations, and emerging architectures, with emphasis on their potential for (topologically) protected quantum information processing. While many designs remain at proof-of-concept stage, rapid progress suggests practical demonstrations may soon be achievable.

cond-mat.mes-hall↗

arXiv2025

Fast microwave-driven two-qubit gates between fluxonium qubits with a transmon coupler

Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2$π$ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of $10^{-2}$ for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.

quant-ph↗

arXiv2025

Single-Qubit Gates Beyond the Rotating-Wave Approximation for Strongly Anharmonic Low-Frequency Qubits

Single-qubit gates are in many quantum platforms applied using a linear drive resonant with the qubit transition frequency which is often theoretically described within the rotating-wave approximation (RWA). However, for fast gates on low-frequency qubits, the RWA may not hold and we need to consider the contribution from counter-rotating terms to the qubit dynamics. The inclusion of counter-rotating terms into the theoretical description gives rise to two challenges. Firstly, it becomes challenging to analytically calculate the time evolution as the Hamiltonian is no longer self-commuting. Moreover, the time evolution now depends on the carrier phase such that, in general, every operation in a sequence of gates is different. In this work, we derive and verify a correction to the drive pulses that minimizes the effect of these counter-rotating terms in a two-level system. We then derive a second correction term that arises from non-computational levels for a strongly anharmonic system. We experimentally implement these correction terms on a fluxonium superconducting qubit, which is an example of a strongly anharmonic, low-frequency qubit for which the RWA may not hold, and demonstrate how fast, high-fidelity single-qubit gates can be achieved without the need for additional hardware complexities.

quant-ph↗

arXiv2025

Calibrating Magnetic Flux Control in Superconducting Circuits by Compensating Distortions on Time Scales from Nanoseconds up to Tens of Microseconds

Fast tuning of the transition frequency of superconducting qubits using magnetic flux is essential, for example, for realizing high-fidelity two-qubit gates with low leakage or for reducing errors in dispersive qubit readout. To apply accurately shaped flux pulses, signal distortions induced by the flux control lines need to be carefully compensated for. This requires their in situ characterization at the reference plane of the qubit. However, many existing approaches are limited in time resolution or in pulse duration. Here, we overcome these limitations and demonstrate accurate flux control with sub-permille residual frequency errors on time scales ranging from nanoseconds to tens of microseconds. We achieve this by combining two complementary methods to characterize and compensate for pulse distortions. We have deployed this approach successfully in a quantum error correction experiment calibrating 24 flux-activated two-qubit gates. Reliable calibration methods, as the ones presented here, are essential in experiments scaling up superconducting quantum processors.

quant-ph↗

arXiv2024

Energy participation ratio analysis for very anharmonic superconducting circuits

Superconducting circuits are being employed for large-scale quantum devices, and a pertinent challenge is to perform accurate numerical simulations of device parameters. One of the most advanced methods for analyzing superconducting circuit designs is the energy participation ratio (EPR) method, which constructs quantum Hamiltonians based on the energy distribution extracted from classical electromagnetic simulations. In the EPR approach, we extract linear terms from finite element simulations and add nonlinear terms using the energy participation ratio extracted from the classical simulations. However, the EPR method relies on a low-order expansion of nonlinear terms, which is prohibitive for accurately describing highly anharmonic circuits. An example of such a circuit is the fluxonium qubit, which has recently attracted increasing attention due to its high lifetimes and low error rates. In this work, we extend the EPR approach to effectively address highly nonlinear superconducting circuits, and, as a proof of concept, we apply our approach to a fluxonium qubit. Specifically, we design, fabricate, and experimentally measure a fluxonium qubit coupled to a readout resonator. We compare the measured frequencies of both the qubit and the resonator to those extracted from the EPR analysis, and we find an excellent agreement. Furthermore, we compare the dispersive shift as a function of external flux obtained from experiments with our EPR analysis and a simpler lumped element model. Our findings reveal that the EPR results closely align with the experimental data, providing more accurate estimations compared to the simplified lumped element simulations.

quant-ph↗

arXiv2024

Improved fluxonium readout through dynamic flux pulsing

The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.

quant-ph↗

arXiv2024

Flux-pulse-assisted Readout of a Fluxonium Qubit

Much attention has focused on the transmon architecture for large-scale superconducting quantum devices, however, the fluxonium qubit has emerged as a possible successor. With a shunting inductor in parallel to a Josephson junction, the fluxonium offers larger anharmonicity and stronger protection against dielectric loss, leading to higher coherence times as compared to conventional transmon qubits. The interplay between the inductive and Josephson energy potentials of the fluxonium qubit leads to a rich dispersive shift landscape when tuning the external flux. Here we propose to exploit the features in the dispersive shift to improve qubit readout. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux bias point with large dispersive shift. We expand the scheme to include different error channels, and show that with an integration time of 155 ns, flux-pulse-assisted readout offers about 5 times improvement in the signal to noise ratio. Moreover, we show that the performance improvement persists in the presence of finite measurement efficiency combined with quasi-static flux noise, and also when considering the increased Purcell rate at the flux-pulse-assisted readout point. We suggest a set of reasonable energy parameters for the fluxonium architecture that will allow for the implementation of our proposed flux-pulse-assisted readout scheme.

quant-ph↗

arXiv2024

Blueprint for all-to-all connected superconducting spin qubits

Andreev (or superconducting) spin qubits (ASQs) have recently emerged as a promising qubit platform that combines superconducting circuits with semiconductor spin degrees of freedom. While recent experiments have successfully coupled two ASQs, how to realize a scalable architecture for extending this coupling to multiple distant qubits remains an open question. In this work, we resolve this challenge by introducing an architecture that achieves all-to-all connectivity between multiple remote ASQs. Our approach enables selective connectivity between any qubit pair while maintaining all other qubit pairs uncoupled. Furthermore, we demonstrate the feasibility of efficient readout using circuit quantum electrodynamics techniques and compare different readout configurations. Our architecture shows promise both for gate-based quantum computing and for analog quantum simulation applications by offering higher qubit connectivity than alternative solid-state platforms.

quant-ph↗

arXiv2024

Gate-tunable phase transition in a bosonic Su-Schrieffer-Heeger chain

Metamaterials engineered to host topological states of matter in controllable quantum systems hold promise for the advancement of quantum simulations and quantum computing technologies. In this context, the Su-Schrieffer-Heeger (SSH) model has gained prominence due to its simplicity and practical applications. Here, we present the implementation of a gate-tunable, five-unit-cell bosonic SSH chain on a one-dimensional lattice of superconducting resonators. We achieve electrostatic control over the inductive intra-cell coupling using semiconductor nanowire junctions, which enables the spectroscopic observation of a transition from a trivial to a topological phase in the engineered metamaterial. In contrast to prior work, our approach offers precise and independent in-situ tuning of the coupling parameters. Finally, we discuss the robustness of the topological edge state against various disorder realizations. Our results supplement efforts towards gate-controlled superconducting electronics and large controllable bosonic lattices to enable quantum simulations.

quant-ph↗

arXiv2024

Gate-tunable kinetic inductance parametric amplifier

Superconducting parametric amplifiers play a crucial role in the preparation and readout of quantum states at microwave frequencies, enabling high-fidelity measurements of superconducting qubits. Most existing implementations of these amplifiers rely on the nonlinearity from Josephson junctions, superconducting quantum interference devices or disordered superconductors. Additionally, frequency tunability arises typically from either flux or current biasing. In contrast, semiconductor-based parametric amplifiers are tunable by local electric fields, which impose a smaller thermal load on the cryogenic setup than current and flux biasing and lead to vanishing crosstalk to other on-chip quantum systems. In this work, we present a gate-tunable parametric amplifier that operates without Josephson junctions, utilizing a proximitized semiconducting nanowire. This design achieves near-quantum-limited performance, featuring more than 20 dB gain and a 30 MHz gain-bandwidth product. The absence of Josephson junctions allows for advantages, including substantial saturation powers of -120dBm, magnetic field compatibility up to 500 mT and frequency tunability over a range of 15 MHz. Our realization of a parametric amplifier supplements efforts towards gate-controlled superconducting electronics, further advancing the abilities for high-performing quantum measurements of semiconductor-based and superconducting quantum devices.

quant-ph↗

arXiv2023

Strong tunable coupling between two distant superconducting spin qubits

Superconducting (or Andreev) spin qubits have recently emerged as an alternative qubit platform with realizations in semiconductor-superconductor hybrid nanowires. In these qubits, the spin degree of freedom is intrinsically coupled to the supercurrent across a Josephson junction via the spin-orbit interaction, which facilitates fast, high-fidelity spin readout using circuit quantum electrodynamics techniques. Moreover, this spin-supercurrent coupling has been predicted to facilitate inductive multi-qubit coupling. In this work, we demonstrate a strong supercurrent-mediated coupling between two distant Andreev spin qubits. This qubit-qubit interaction is of the longitudinal type and we show that it is both gate- and flux-tunable up to a coupling strength of 178 MHz. Finally, we find that the coupling can be switched off in-situ using a magnetic flux. Our results demonstrate that integrating microscopic spin states into a superconducting qubit architecture can combine the advantages of both semiconductors and superconducting circuits and pave the way to fast two-qubit gates between remote spins.

quant-ph↗