SearcharxivSearch

arXiv subjects

Christian Kramberger

Publications and source records attributed to Christian Kramberger.

12 recordsLinked to original sources

Temperature dependence of the Raman spectrum of orthorhombic Bi2Se3

Bismuth selenide, a benchmark topological insulator, grows in a trigonal structure at ambient conditions and exhibits a number of enticing properties related to the formation of Dirac surface states. Besides this polytype, a metastable orthorhombic modification with Pnma space group has been produced by electrodeposition and high-pressure high-temperature synthesis displaying upon Sb doping significant thermoelectric properties in the midtemperature range. However, very little experimental information is available on the fundamental properties of this polytype, such as, e.g., the electronic band gap and the lattice dynamics. We report here the temperature dependence of the Raman spectra of orthorhombic Bi2Se3 between 10 K and 300 K, which displays an anharmonic behavior of the optical phonons that can be modelled with a two-phonon decay channel. In order to analyze the data we performed ab initio calculations of the electronic bandstructure, the phonon frequencies at the center of the Brillouin zone, and the phonon dispersion relations along the main symmetry directions, examining the effect of spin-orbit coupling in both phonon and electronic energies. Lastly, we report here cathodoluminescence experiments at 83 K that set a lower limit to the electronic bandgap at 0.835 eV, pointing to an indirect nature, in agreement with our calculations. These results shed light to essential properties of orthorhombic Bi2Se3 for further understanding of the potential of this semiconductor for thermoelectrics and new applications.

cond-mat.mtrl-sci

Direct observation of the vanishing EELS cross section in graphene

In transmission electron energy-loss spectroscopy, the cross section in 2D is quenched by kinematic effects once the momentum transfer becomes smaller than a critical value set by $q_z$, the momentum loss parallel to the beam. Our highly momentum ($\Delta q = 0.02$~\r{A}$^{-1}$) and energy ($\Delta E = 45$~meV) resolved setup is instrumental on delivering the unprecedented experimental verification of quenched 2D EEL spectra on freestanding graphene at momentum transfers $q$ below $0.06$\r{A}$^{-1}$. We retrieve the intrinsic uniform dielectric response of graphene from measured spectra by quantifying the kinematic suppression.

cond-mat.mes-hall

Excitonic effects in energy loss spectra of freestanding graphene

In this work we perform electron energy-loss spectroscopy (EELS) of freestanding graphene with high energy and momentum resolution to disentangle the quasielastic scattering from the excitation gap of Dirac electrons close to the optical limit. We show the importance of many-body effects on electronic excitations at finite transferred momentum by comparing measured EELS with ab initio calculations at increasing levels of theory. Quasi-particle corrections and excitonic effects are addressed within the GW approximation and Bethe-Salpeter equation, respectively. Both effects are essential in the description of the EEL spectra to obtain a quantitative agreement with experiments, with the position, dispersion, and shape of both the excitation gap and the $\pi$ plasmon being significantly affected by excitonic effects.

cond-mat.mtrl-sci

$π$/2 Mode Converters and Vortex Generators for Electrons

In optics, mode conversion is an elegant way to switch between Hermite Gaussian and Laguerre Gaussian beam profiles and thereby impart orbital angular momentum onto the beam and to create vortices. In optics such vortex beams can be produced in a setup consisting of two identical cylinder lenses. In electron optics, quadrupole lenses can be used for the same purpose. Here we investigate generalized asymmetric designs of a quadrupole mode converter that may be realized within the constraints of existing electron microscopes and can steer the development of dedicated vortex generators for high brilliance electron vortex probes of atomic scale.

physics.app-ph

Revealing the 3D Structure of Graphene Defects

We demonstrate insights into the three-dimensional structure of defects in graphene, in particular grain boundaries, obtained via a new approach from two transmission electron microscopy images recorded at different angles. The structure is obtained through an optimization process where both the atomic positions as well as the simulated imaging parameters are iteratively changed until the best possible match to the experimental images is found. We first demonstrate that this method works using an embedded defect in graphene that allows direct comparison to the computationally predicted three-dimensional shape. We then applied the method to a set of grain boundary structures with misorientation angles nearly spanning the whole available range (2.6-29.8°). The measured height variations at the boundaries reveal a strong correlation with the misorientation angle with lower angles resulting in stronger corrugation and larger kink angles. Our results allow for the first time a direct comparison with theoretical predictions for the corrugation at grain boundaries and we show that the measured kink angles are significantly smaller than the largest predicted ones.

physics.app-ph

Analysis of point defects in graphene using low dose scanning transmission electron microscopy imaging and maximum likelihood reconstruction

Freestanding graphene displays an outstanding resilience to electron irradiation at low electron energies. Point defects in graphene are, however, subject to beam driven dynamics. This means that high resolution micrographs of point defects, which usually require a high electron irradiation dose might not represent the intrinsic defect population. Here, we capture the inital defects formed by ejecting carbon atoms under electron irradiation, by imaging with very low doses and subsequent reconstruction of the frequently occuring defects via a maximum likelihood algorithm.

cond-mat.mes-hall

Automated image acquisition for low-dose STEM at atomic resolution

Beam damage is a major limitation in electron microscopy that becomes increasingly severe at higher resolution. One possible route to circumvent radiation damage, which forms the basis for single-particle electron microscopy and related techniques, is to distribute the dose over many identical copies of an object. For the acquisition of low-dose data, ideally no dose should be applied to the region of interest prior to the acquisition of data. We present an automated approach that can collect large amounts of data efficiently by acquiring images in an user-defined area-of-interest with atomic resolution. We demonstrate that the stage mechanics of the Nion UltraSTEM, combined with an intelligent algorithm to move the sample, allows the automated acquisition of atomically resolved images from micron-sized areas of a graphene substrate. Moving the sample stage automatically in a regular pattern over the area-of-interest enables the collection of data from pristine sample regions without exposing them to the electron beam before recording an image. Therefore, it is possible to obtain data with minimal dose (no prior exposure from focusing), which is only limited by the minimum signal needed for data processing. This enables us to prevent beam induced damage in the sample and to acquire large datasets within a reasonable amount of time.

cond-mat.mtrl-sci

Insights into radiation damage from atomic resolution scanning transmission electron microscopy imaging of mono-layer CuPcCl$_{16}$ films on graphene

Atomically resolved images of monolayer organic crystals have only been obtained with scanning probe methods so far. On the one hand, they are usually prepared on surfaces of bulk materials, which are not accessible by (scanning) transmission electron microscopy. On the other hand, the critical electron dose of a monolayer organic crystal is orders of magnitudes lower than the one for bulk crystals, making (scanning) transmission electron microscopy characterization very challenging. In this work we present an atomically resolved study on the dynamics of a monolayer CuPcCl\textsubscript{16} crystal under the electron beam as well as an image of the undamaged molecules obtained by low-dose electron microscopy. The results show the dynamics and the radiation damage mechanisms in the 2D layer of this material, complementing what has been found for bulk crystals in earlier studies. Furthermore, being able to image the undamaged molecular crystal allows the characterization of new composites consisting of 2D materials and organic molecules.

cond-mat.mtrl-sci

Challenging the nature of low energy plasmon excitations in CaC$_6$ using electron energy-loss spectroscopy

The nature of low energy plasmon excitations plays an important role in understanding the low energy electronic properties and coupling mechanism of different superconducting compounds such as CaC$_6$. Recent ab-initio studies predict a charge carrier intraband plasmon in keeping with a low energy acoustic plasmon. Here, we have studied the low-energy electronic excitations of CaC$_6$ using high-resolution electron energy-loss spectroscopy in transmission at low temperatures. The analysis of the core-level excitations leads to the conclusion that hybridization between graphite and calcium states plays an essential role in this graphite intercalated compound. Regarding the low energy plasmon excitation, we observe the formation of an intraband (charge carrier) plasmon with a negative dispersion at about 3.5 eV in sound agreement with the theory. Finally, a weak excitation around 1.2 eV with an almost linear dispersion relation can be observed as predicted for an acoustic plasmon that may mediate the superconducting coupling in CaC$_6$. However its optical limit at ~1 eV challenges the theoretical predictions and safely rules out an electronic superconducting coupling mechanism in CaC$_6$.

cond-mat.supr-con

Adaptation of a commercial Raman spectrometer for multiline and broadband laser operation

A commercial single laser line Raman spectrometer is modified to accommodate multiline and tunable dye lasers, thus combining the high sensitivity of such single monochromator systems with broadband operation. Such instruments rely on high-throughput interference filters that perform both beam alignment and Rayleigh filtering. Our setup separates the dual task of the built-in monochromator into two independent elements: a beam splitter and a long pass filter. Filter rotation shifts the transmission passband, effectively expanding the range of operation. Rotation of the filters has a negligible effect on the optical path, allowing broadband operation and stray light rejection down to 70-150 1/cm. Operation is demonstrated on single-walled carbon nanotubes, for which the setup was optimized.

cond-mat.mtrl-sci

A broadband and high throughput single-monochromator Raman spectrometer; application for single-wall carbon nanotubes

We present a high sensitivity single-monochromator Raman spectrometer which allows operation with a tunable laser source. The instrument is based on the modification of a commercial Raman spectrometer; such instruments operate with holographic Rayleigh filters which also act as a laser mirrors and are usually considered as inherently narrow-band. In our design, the two tasks are separated and the filter can be freely rotated without much effect on the light alignment. Since rotation shifts the filter passband, this modification allows tunable operation with efficient stray light filtering down to 150 1/cm. The design is optimized for single-wall carbon nanotubes, for which the performance is demonstrated using a tunable dye-laser source. The spectrometer thus combines the high sensitivity with the broadband characteristics of usual triple monochromator systems.

cond-mat.mtrl-sci

Minimal bundling of single-walled carbon nanotubes comprising vertically aligned films

A freestanding film of vertically aligned single-walled carbon nanotubes (VA-SWNTs) synthesized by the alcohol catalytic chemical vapor deposition (ACCVD) method was observed directly by transmission electron microscopy (TEM). These observations revealed that the film is comprised primarily of small SWNT bundles, typically containing 3-8 SWNTs. The lack of significant bundling is supported by electron diffraction spectra, in which no bundle peak is observed, and by electron energy-loss spectroscopy (EELS), which shows minimal dielectric screening. This indicates the electrical properties of the VA-SWNT film are dominated by the one-dimensional nature of SWNTs, rather than behaving as a bulk material.

cond-mat.other