arXiv subjects

Christian Kumpf

Publications and source records attributed to Christian Kumpf.

13 recordsLinked to original sources

arXiv2026

Tracing the film structure of an organic semiconductor with photoemission orbital tomography

Photoemission orbital tomography (POT) is a powerful tool for investigating the orbitals and electronic band structure of oriented layers of organic molecules. In many cases, POT allows conclusions to be drawn regarding the geometric structure, but so far it has been mainly applied to (sub)monolayers and rarely to bilayers, raising the question of whether POT can also provide structure information for thicker films. Here, we use POT to analyze the band dispersion in up to eight layers of $\alpha$-sexithiophene (6T) adsorbed on Cu(110)-p($2\times1$)O. This linear oligomer turns out to be a textbook example that exemplifies the concepts of intra- and intermolecular band dispersion in molecules. Moreover, the rich band and orbital structure information available from POT for this system enables us to trace subtle changes in the crystal structure as a function of layer thickness. Specifically, we find that the periodicity of an intermolecular band changes with film thickness, revealing an increase of the intralayer distance between the molecules with the number of layers. At the same time, the momentum distribution of photoemission from the highest occupied molecular orbital of 6T discloses a decrease of the molecular tilt angle. Following the evolution of tilt angle and lattice constant with layer thickness, we observe -- purely based on electronic structure data -- that the surface-templated monolayer structure relaxes into the structure of bulk 6T crystals. The experimental findings agree well with the results of density functional theory calculations.

cond-mat.mtrl-sci↗

arXiv2026

Subcycle videography of lightwave-driven Landau-Zener-Majorana transitions in graphene

Strong light fields have unlocked previously unthinkable possibilities to tailor coherent electron trajectories, engineer band structures and shape emergent phases of matter all-optically. Unravelling the underlying quantum mechanisms requires a visualisation of the lightwave-driven electron motion directly in the band structure. While photoelectron momentum microscopy has imaged optically excited electrons averaged over many cycles of light, actual subcycle band-structure videography has been limited to small electron momenta. Yet lightwave-driven elementary processes in quantum materials often occur throughout momentum space. Here, we introduce attosecond-precision, subcycle band-structure videography covering the entire first Brillouin zone (BZ) and visualize one of the most fundamental but notoriously elusive strong-field processes: non-adiabatic Landau-Zener-Majorana (LZM) tunnelling. The interplay of field-driven acceleration within the Dirac-like band structure of graphene and periodic LZM interband tunnelling manifest in a coherent displacement and distortion of the momentum distribution at the BZ edge. The extremely non-thermal electron distributions also allow us to disentangle competing scattering processes and assess their impact on coherent electronic control through electron redistribution and thermalization. Our panoramic view of strong-field-driven electron motion in quantum materials lays the foundation for a microscopic understanding of some of the most discussed light-driven phenomena in condensed matter physics.

cond-mat.mes-hall↗

arXiv2025

Multi-Orbital Charge Transfer into Nonplanar Cycloarenes Revealed with CO-Functionalized Tips

On-surface synthesis has allowed for the tuneable preparation of numerous molecular systems with variable properties. Recently, we demonstrated the highly selective synthesis of kekulene (>99%) on Cu(111) and isokekulene (92%) on Cu(110) from the same molecular precursor (Ruan et al., Angew. Chem. Int. Ed. 2025, e202509932). Scanning tunneling microscopy with CO-functionalized tips can identify the single molecules on the basis of their geometric structure at a low coverage on Cu(110), but it also detects complex features due to electronic contributions close to the Fermi energy. Here, we investigate the origin of these features by simulating STM images based on a weighted sum of multiple molecular orbitals, for which we employ weights based on the calculated molecular-orbital projected density of states. This allows for an experimental confirmation of charge transfer from the surface into multiple formerly unoccupied molecular orbitals for single molecules of kekulene as well as isokekulene in its two nonplanar adsorption configurations. In comparison, the area-integrating photoemission orbital tomography technique confirms the charge transfer as well as the high selectivity for the formation of a full monolayer of mainly isokekulene on Cu(110). Our STM-based approach is applicable to a wide range of adsorbed molecular systems and specifically also suited for strongly interacting surfaces, nonplanar molecules, and such molecules which can only be prepared at extremely low yields.

physics.chem-ph↗

arXiv2025

Solving the Phase Problem of Diffraction: X-ray Standing Waves Imaging on Bismuthene/SiC(0001)

The phase retrieval problem is a fundamental shortcoming of all diffraction-based methods, arising from the inability to measure the phase of scattered waves. The (normal incidence) X-ray standing wave (NIXSW) technique circumvents this issue by introducing a (Bragg-generated) X-ray standing wave field throughout the sample, relative to which any atomic species can be localized by probing its fluorescence or photoelectron yield. In essence, in a single measurement the complex scattering factor (i.e., its amplitude \textit{and} phase) corresponding to the used Bragg reflection is determined. Performing this for multiple Bragg reflections enables one to reconstruct the scattering density of the sample in three dimensions, straightforwardly as the Fourier sum of all measured (complex) scattering factors. Here, we utilize this technique to reveal the structural key features involved in the formation of the quantum spin Hall insulator bismuthene on silicon carbide. In this prominent example, the two-dimensional Bi layer is confined between a 4H-SiC substrate crystal and an epitaxial graphene layer. The key finding is a change in the adsorption site of the Bi atoms underneath the graphene upon hydrogenation, caused by the H-saturation of one (out of three) Si dangling bonds per unit cell. This structural change, clearly revealed by our NIXSW imaging experiment, is the key feature leading to the formation of the characteristic band structure of the 2D bismuthene honeycomb.

cond-mat.mes-hall↗

arXiv2025

Reversible Switching of the Environment-Protected Quantum Spin Hall Insulator Bismuthene at the Graphene/SiC Interface

Quantum Spin Hall Insulators (QSHI) have been extensively studied both theoretically and experimentally because they exhibit robust helical edge states driven by spin-orbit coupling and offer the potential for applications in spintronics through dissipationless spin transport. However, to realize devices, it is indispensable to gain control over the interaction of the active layer with the substrate, and to protect it from environmental influences. Here we show that a single layer of elemental Bi, formed by intercalation of an epitaxial graphene buffer layer on SiC(0001), is a promising candidate for a QSHI. This layer can be reversibly switched between an electronically inactive precursor state and a ``bismuthene state'', the latter exhibiting the predicted band structure of a true two-dimensional bismuthene layer. Switching is accomplished by hydrogenation (dehydrogenation) of the sample, i.e., a partial passivation (activation) of dangling bonds of the SiC substrate, causing a lateral shift of Bi atoms involving a change of the adsorption site. In the bismuthene state, the Bi honeycomb layer is a prospective QSHI, inherently protected by the graphene sheet above and the H-passivated substrate below. Thus, our results represent an important step towards protected QSHI systems beyond graphene.

cond-mat.mes-hall↗

arXiv2024

Epitaxial growth of mono- and (twisted) multilayer graphene on SiC(0001)

To take full advantage of twisted bilayers of graphene or other two-dimensional materials, it is essential to precisely control the twist angle between the stacked layers, as this parameter determines the properties of the heterostructure. In this context, a growth routine using borazine as a surfactant molecule on SiC(0001) surfaces has been reported, leading to the formation of high-quality epitaxial graphene layers that are unconventionally oriented, i.e., aligned with the substrate lattice (G-$R0^\circ$) [Bocquet et al. Phys. Rev. Lett. 125, 106102 (2020)]. Since the G-$R0^\circ$ layer sits on a buffer layer, also known as zeroth-layer graphene (ZLG), which is rotated $30^\circ$ with respect to the SiC substrate and still covalently bonded to it, decoupling the ZLG-$R30^\circ$ from the substrate can lead to high-quality twisted bilayer graphene (tBLG). Here we report the decoupling of ZLG-$R30^\circ$ by increasing the temperature during annealing in a borazine atmosphere. While this converts ZLG-$R30^\circ$ to G-$R30^\circ$ and thus produces tBLG, the growth process at elevated temperature is no longer self-limiting, so that the surface is covered by a patchwork of graphene multilayers of different thicknesses. We find a 20% coverage of tBLG on ZLG, while on the rest of the surface tBLG sits on one or more additional graphene layers. In order to achieve complete coverage with tBLG only, alternative ways of decoupling the ZLG, e.g., by intercalation with suitable atoms, may be advantageous.

cond-mat.mtrl-sci↗

arXiv2023

Coherent and incoherent excitation pathways in time-resolved photoemission orbital tomography of CuPc/Cu(001)-2O

Time-resolved photoemission orbital tomography (tr-POT) offers unique possibilities for tracing molecular electron dynamics. The recorded pump-induced changes of the angle-resolved photoemission intensities allow to characterize unoccupied molecular states in momentum space and to deduce the incoherent temporal evolution of their population. Here, we show for the example of CuPc/Cu(001)-2O that the method also gives access to the coherent regime and that different excitation pathways can be disentangled by a careful analysis of the time-dependent change of the photoemission momentum pattern. In particular, we demonstrate by varying photon energy and polarization of the pump light, how the incoherent temporal evolution of the LUMO distribution can be distinguished from coherent contributions of the projected HOMO. Moreover, we report the selective excitation of molecules with a specific orientation at normal incidence by aligning the electric field of the pump light along the molecular axis.

cond-mat.mtrl-sci↗

arXiv2022

Vertical structure of Sb-intercalated quasifreestanding graphene on SiC(0001)

Using the normal incidence x-ray standing wave technique as well as low energy electron microscopy we have investigated the structure of quasi-freestanding monolayer graphene (QFMLG) obtained by intercalation of antimony under the $\left(6\sqrt{3}\times6\sqrt{3}\right)R30^\circ$ reconstructed graphitized 6H-SiC(0001) surface, also known as zeroth-layer graphene. We found that Sb intercalation decouples the QFMLG well from the substrate. The distance from the QFMLG to the Sb layer almost equals the expected van der Waals bonding distance of C and Sb. The Sb intercalation layer itself is mono-atomic, flat, and located much closer to the substrate, at almost the distance of a covalent Sb-Si bond length. All data is consistent with Sb located on top of the uppermost Si atoms of the SiC bulk.

cond-mat.mtrl-sci↗

arXiv2022

Boron nitride on SiC(0001)

In the field of van der Waals heterostructures, the twist angle between stacked two-dimensional (2D) layers has been identified to be of utmost importance for the properties of the heterostructures. In this context, we previously reported the growth of a single layer of unconventionally oriented epitaxial graphene that forms in a surfactant atmosphere [F. C. Bocquet, et al., Phys. Rev. Lett. 125, 106102 (2020)]. The resulting G-R0$^\circ$ layer is aligned with the SiC lattice, and hence represents an important milestone towards high quality twisted bilayer graphene (tBLG), a frequently investigated model system in this field. Here, we focus on the surface structures obtained in the same surfactant atmosphere, but at lower preparation temperatures at which a boron nitride template layer forms on SiC(0001). In a comprehensive study based on complementary experimental and theoretical techniques, we find -- in contrast to the literature -- that this template layer is a hexagonal B$_x$N$_y$ layer, but not high-quality hBN. It is aligned with the SiC lattice and gradually replaced by low-quality graphene in the 0$^\circ$ orientation of the B$_x$N$_y$ template layer upon annealing.

cond-mat.mtrl-sci↗

arXiv2021

The Vertical Position of Sr Dopants in the Sr$_x$Bi$_2$Se$_3$ Superconductor

The discovery of topological superconductivity in doped Bi$_2$Se$_3$ made this class of materials highly important for the field of condensed matter physics. However, the structural origin of the superconducting state remained elusive, despite being investigated intensively in recent years. We use scanning tunneling microscopy and the normal incidence x-ray standing wave (NIXSW) technique in order to determine the vertical position of the dopants -- one of the key parameters for understanding topological superconductivity in this material -- for the case of Sr$_{x}$Bi$_2$Se$_3$. In a novel approach we analyze the NIXSW data in consideration of the inelastic mean free path of the photoemitted electrons, which allows us to distinguish between symmetry equivalent sites. We find that Sr-atoms are not situated inside the van der Waals gap between the Bi$_2$Se$_3$ quintuple layers but rather in the quintuple layer close to the outer Se planes.

cond-mat.supr-con↗

arXiv2020

Tracing orbital images on ultrafast time scales

Frontier orbitals, i.e., the highest occupied and lowest unoccupied orbitals of a molecule, generally determine molecular properties, such as chemical bonding and reactivities. Consequently, there has been a lot of interest in measuring them, despite the fact that, strictly speaking, they are not quantum-mechanical observables. Yet, with photoemission tomography a powerful technique has recently been introduced by which the electron distribution in orbitals of molecules adsorbed at surfaces can be imaged in momentum space. This has even been used for the identification of reaction intermediates in surface reactions. However, so far it has been impossible to follow an orbital's momentum-space dynamics in time, for example through an excitation process or a chemical reaction. Here, we report a key step in this direction: we combine time-resolved photoemission employing high laser harmonics and a recently developed momentum microscope to establish a tomographic, femtosecond pump-probe experiment of unoccupied molecular orbitals. Specifically, we measure the full momentum-space distribution of transiently excited electrons. Because in molecules this momentum-space distribution is closely linked to orbital shapes, our experiment offers the extraordinary possibility to observe ultrafast electron motion in time and space. This enables us to connect their excited states dynamics to specific real-space excitation pathways.

physics.chem-ph↗

arXiv2020

Modification of the charge and magnetic order of a low dimensional ferromagnet by molecule-surface bonding

The ability to design and control the spin and charge order of low dimensional materials on the molecular scale offers an intriguing pathway towards the miniaturization of spintronic technology towards the nanometer scale. In this work, we focus on the adsorption induced modifications of the magnetic and electronic properties of a low dimensional ferromagnetic surface alloy after the adsorption of the prototypical organic molecule perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). For this metal-organic interface, we observe the formation of a localized $σ$-like bond between the functional molecular groups and the surface alloy atoms. This strong chemical bonding coincides with a lifting of the characteristic surface alloy band structure and a reduction of the magnitude of the local magnetic moments of the Dy atoms by 18%. We attribute both findings to a mixing of spin-degenerate molecular states with spin-split states of the Dy-Ag surface alloy via the sigma-like bonds between PTCDA and the Dy surface alloy atoms. Our findings clearly demonstrate the potential of tailored molecule-surface sigma-bonds to control not only the electronic but also the magnetic order of low dimensional materials.

cond-mat.mes-hall↗

arXiv2020

Vertical bonding distances and interfacial band structure of PTCDA on a Sn-Ag surface alloy

Molecular materials enable a vast variety of functionalities for novel electronic and spintronic devices. The unique possibility to alter or substitute organic molecules or metallic substrates offers the opportunity to modify and optimize interfacial properties for almost any desired field of application. For this reason, we extend the successful approach to control molecular interfaces by surface alloying. We present a comprehensive characterization of the structural and electronic properties of the interface formed between the prototypical molecule PTCDA and a Sn-Ag surface alloy grown on an Ag(111) single crystal surface. We monitor the changes of adsorption height of the surface alloy atoms and electronic valence band structure upon adsorption of one layer of PTCDA using the normal incidence x-ray standing wave technique in combination with momentum-resolved photoelectron spectroscopy. We find that the vertical buckling and the surface band structure of the SnAg$_2$ surface alloy is not altered by the adsorption of one layer of PTCDA, in contrast to our recent study of PTCDA on a PbAg$_2$ surface alloy [Phys. Rev. Lett. 117, 096805 (2016)] . In addition, the vertical adsorption geometry of PTCDA and the interfacial energy level alignment indicate the absence of any chemical interaction between the molecule and the surface alloy. We attribute the different interactions at these PTCDA/surface alloy interfaces to the presence or absence of local $σ$-bonds between the PTCDA oxygen atoms and the surface atoms. Combining our findings with results from literature, we are able to propose an empiric rule for engineering the surface band structure of alloys by adsorption of organic molecules.

cond-mat.mes-hall↗