Searcharxiv⌕ Search

arXiv subjects

Christoph Federrath

Publications and source records attributed to Christoph Federrath.

At least 199 records · Page 11Linked to original sources

SHOCKFIND - An algorithm to identify magnetohydrodynamic shock waves in turbulent clouds

The formation of stars occurs in the dense molecular cloud phase of the interstellar medium. Observations and numerical simulations of molecular clouds have shown that supersonic magnetised turbulence plays a key role for the formation of stars. Simulations have also shown that a large fraction of the turbulent energy dissipates in shock waves. The three families of MHD shocks --- fast, intermediate and slow --- distinctly compress and heat up the molecular gas, and so provide an important probe of the physical conditions within a turbulent cloud. Here we introduce the publicly available algorithm, SHOCKFIND, to extract and characterise the mixture of shock families in MHD turbulence. The algorithm is applied to a 3-dimensional simulation of a magnetised turbulent molecular cloud, and we find that both fast and slow MHD shocks are present in the simulation. We give the first prediction of the mixture of turbulence-driven MHD shock families in this molecular cloud, and present their distinct distributions of sonic and Alfvenic Mach numbers. Using subgrid one-dimensional models of MHD shocks we estimate that ~0.03 % of the volume of a typical molecular cloud in the Milky Way will be shock heated above 50 K, at any time during the lifetime of the cloud. We discuss the impact of this shock heating on the dynamical evolution of molecular clouds.

astro-ph.GA↗

The world's largest turbulence simulations

Understanding turbulence is critical for a wide range of terrestrial and astrophysical applications. Here we present first results of the world's highest-resolution simulation of turbulence ever done. The current simulation has a grid resolution of 10048^3 points and was performed on 65536 compute cores on SuperMUC at the Leibniz Supercomputing Centre (LRZ). We present a scaling test of our modified version of the FLASH code, which updates the hydrodynamical equations in less than 3 micro seconds per cell per time step. A first look at the column density structure of the 10048^3 simulation is presented and a detailed analysis is provided in a forthcoming paper.

astro-ph.SR↗

The role of turbulence, magnetic fields and feedback for star formation

Star formation is inefficient. Only a few percent of the available gas in molecular clouds forms stars, leading to the observed low star formation rate (SFR). The same holds when averaged over many molecular clouds, such that the SFR of whole galaxies is again surprisingly low. Indeed, considering the low temperatures, molecular clouds should be highly gravitationally unstable and collapse on their global mean freefall timescale. And yet, they are observed to live about 10-100 times longer, i.e., the SFR per freefall time is only a few percent. Thus, other physical mechanisms must provide support against quick global collapse. Magnetic fields, turbulence and stellar feedback have been proposed as stabilising agents controlling star formation, but it is still unclear which of these processes is the most important and what their relative contributions are. Here I present high-resolution, adaptive-mesh-refinement simulations of star cluster formation that include turbulence, magnetic fields, and protostellar jet/outflow feedback. These simulations produce nearly realistic star formation rates consistent with observations, but only if turbulence, magnetic fields and feedback are included simultaneously.

astro-ph.GA↗

The small-scale turbulent dynamo in smoothed particle magnetohydrodynamics

Supersonic turbulence is believed to be at the heart of star formation. We have performed smoothed particle magnetohydrodynamics (SPMHD) simulations of the small-scale dynamo amplification of magnetic fields in supersonic turbulence. The calculations use isothermal gas driven at rms velocity of Mach 10 so that conditions are representative of star-forming molecular clouds in the Milky Way. The growth of magnetic energy is followed for 10 orders in magnitude until it reaches saturation, a few percent of the kinetic energy. The results of our dynamo calculations are compared with results from grid-based methods, finding excellent agreement on their statistics and their qualitative behaviour. The simulations utilise the latest algorithmic developments we have developed, in particular, a new divergence cleaning approach to maintain the solenoidal constraint on the magnetic field and a method to reduce the numerical dissipation of the magnetic shock capturing scheme. We demonstrate that our divergence cleaning method may be used to achieve $\nabla \cdot {\bf B}=0$ to machine precision, albeit at significant computational expense.

astro-ph.IM↗

A comparison between grid and particle methods on the small-scale dynamo in magnetised supersonic turbulence

We perform a comparison between the smoothed particle magnetohydrodynamics (SPMHD) code, Phantom, and the Eulerian grid-based code, Flash, on the small-scale turbulent dynamo in driven, Mach 10 turbulence. We show, for the first time, that the exponential growth and saturation of an initially weak magnetic field via the small-scale dynamo can be successfully reproduced with SPMHD. The two codes agree on the behaviour of the magnetic energy spectra, the saturation level of magnetic energy, and the distribution of magnetic field strengths during the growth and saturation phases. The main difference is that the dynamo growth rate, and its dependence on resolution, differs between the codes, caused by differences in the numerical dissipation and shock capturing schemes leading to differences in the effective Prandtl number in Phantom and Flash.

astro-ph.IM↗

The reliability of observational measurements of column density probability distribution functions

Probability distribution functions (PDFs) of column densities are an established tool to characterize the evolutionary state of interstellar clouds. Using simulations, we show to what degree their determination is affected by noise, line-of-sight contamination, field selection, and the incomplete sampling in interferometric measurements. We solve the integrals that describe the convolution of a cloud PDF with contaminating sources and study the impact of missing information on the measured column density PDF. The effect of observational noise can be easily estimated and corrected for if the root mean square (rms) of the noise is known. For $σ_{noise}$ values below 40% of the typical cloud column density, $N_{peak}$, this involves almost no degradation of the accuracy of the PDF parameters. For higher noise levels and narrow cloud PDFs the width of the PDF becomes increasingly uncertain. A contamination by turbulent foreground or background clouds can be removed as a constant shield if the PDF of the contamination peaks at a lower column or is narrower than that of the observed cloud. Uncertainties in the definition of the cloud boundaries mainly affect the low-column density part of the PDF and the mean density. As long as more than 50% of a cloud are covered, the impact on the PDF parameters is negligible. In contrast, the incomplete sampling of the uv plane in interferometric observations leads to uncorrectable distortions of the PDF of the produced maps. An extension of ALMA's capabilities would allow us to recover the high-column density tail of the PDF but we found no way to measure the intermediate and low column density part of the underlying cloud PDF in interferometric observations.

astro-ph.IM↗

On the universality of interstellar filaments: theory meets simulations and observations

Filaments are ubiquitous in the universe. Recent observations have revealed that stars and star clusters form preferentially along dense filaments. Understanding the formation and properties of filaments is therefore a crucial step in understanding star formation. Here we perform three-dimensional high-resolution magnetohydrodynamical simulations that follow the evolution of molecular clouds and the formation of filaments and stars. We apply a filament detection algorithm and compare simulations with different combinations of physical ingredients: gravity, turbulence, magnetic fields and jet/outflow feedback. We find that gravity-only simulations produce significantly narrower filament profiles than observed, while simulations that include turbulence produce realistic filament properties. For these turbulence simulations, we find a remarkably universal filament width of 0.10 +/- 0.02 pc, which is independent of the star formation history of the clouds. We derive a theoretical model that provides a physical explanation for this characteristic filament width, based on the sonic scale (lambda_sonic) of molecular cloud turbulence. Our derivation provides lambda_sonic as a function of the cloud diameter L, the velocity dispersion sigma_v, the gas sound speed c_s, and the ratio of thermal to magnetic pressure, plasma beta. For typical cloud conditions in the Milky Way spiral arms, we find lambda_sonic = 0.04-0.16 pc, in excellent agreement with the filament width of 0.05-0.15 pc from observations. Consistent with the theoretical model assumptions, we find that the velocity dispersion inside the filaments is subsonic and supersonic outside. We further explain the observed p=2 scaling of the filament density profile, rho ~ r^(-p) with the collision of two planar shocks forming a filament at their intersection.

astro-ph.SR↗

Filament formation in wind-cloud interactions. I. Spherical clouds in uniform magnetic fields

Filamentary structures are ubiquitous in the interstellar medium, yet their formation, internal structure, and longevity have not been studied in detail. We report the results from a comprehensive numerical study that investigates the characteristics, formation, and evolution of filaments arising from magnetohydrodynamic interactions between supersonic winds and dense clouds. Here we improve on previous simulations by utilising sharper density contrasts and higher numerical resolutions. By following multiple density tracers, we find that material in the envelopes of the clouds is removed and deposited downstream to form filamentary tails, while the cores of the clouds serve as footpoints and late-stage outer layers of these tails. Aspect ratios >12, subsonic velocity dispersions ~0.1-0.3 of the wind sound speed, and magnetic field amplifications ~100 are found to be characteristic of these filaments. We also report the effects of different magnetic field strengths and orientations. The magnetic field strength regulates vorticity production: sinuous filamentary towers arise in non-magnetic environments, while strong magnetic fields inhibit small-scale perturbations at boundary layers making tails less turbulent. Magnetic field components aligned with the direction of the flow favour the formation of pressure-confined flux ropes inside the tails, whilst transverse components tend to form current sheets. Softening the equation of state to nearly isothermal leads to suppression of dynamical instabilities and further collimation of the tail. Towards the final stages of the evolution, we find that small cloudlets and distorted filaments survive the break-up of the clouds and become entrained in the winds, reaching velocities ~0.1 of the wind speed.

astro-ph.GA↗

Saturation of the Turbulent Dynamo

The origin of strong magnetic fields in the Universe can be explained by amplifying weak seed fields via turbulent motions on small spatial scales and subsequently transporting the magnetic energy to larger scales. This process is known as the turbulent dynamo and depends on the properties of turbulence, i.e. on the hydrodynamical Reynolds number and the compressibility of the gas, and on the magnetic diffusivity. While we know the growth rate the magnetic energy in the linear regime, the saturation level, i.e. the ratio of magnetic energy to turbulent kinetic energy that can be reached, is not known from analytical calculations. In this paper we present the first scale-dependent saturation model based on an effective turbulent resistivity which is determined by the turnover timescale of turbulent eddies and the magnetic energy density. The magnetic resistivity increases compared to the Spitzer value and the effective scale on which the magnetic energy spectrum is at its maximum moves to larger spatial scales. This process ends when the peak reaches a characteristic wavenumber k* which is determined by the critical magnetic Reynolds number. The saturation level of the dynamo also depends on the type of turbulence and differs for the limits of large and small magnetic Prandtl numbers Pm. With our model we find saturation levels between 43.8% and 1.3% for Pm>>1 and between 2.43% and 0.135% for Pm<<1, where the higher values refer to incompressible turbulence and the lower ones to highly compressible turbulence.

physics.plasm-ph↗

Inefficient star formation through turbulence, magnetic fields and feedback

Star formation is inefficient. Only a few percent of the available gas in molecular clouds forms stars, leading to the observed low star formation rate (SFR). The same holds when averaged over many molecular clouds, such that the SFR of whole galaxies is again surprisingly low. Indeed, considering the low temperatures, molecular clouds should be highly gravitationally unstable and collapse on their global mean freefall timescale. And yet, they are observed to live about 10-100 times longer, i.e., the SFR per freefall time (SFR_ff) is only a few percent. Thus, other physical mechanisms must counteract the quick global collapse. Turbulence, magnetic fields and stellar feedback have been proposed as regulating agents, but it is still unclear which of these processes is the most important and what their relative contributions are. Here we run high-resolution simulations including gravity, turbulence, magnetic fields, and jet/outflow feedback. We confirm that clouds collapse on a mean freefall time, if only gravity is considered, producing stars at an unrealistic rate. In contrast, if turbulence, magnetic fields, and feedback are included step-by-step, the SFR is reduced by a factor of 2-3 with each additional physical ingredient. When they all act in concert, we find a constant SFR_ff = 0.04, currently the closest match to observations, but still about a factor of 2-4 higher than the average. A detailed comparison with other simulations and with observations leads us to conclude that only models with turbulence producing large virial parameters, and including magnetic fields and feedback can produce realistic SFRs.

astro-ph.SR↗

A universal, turbulence-regulated star formation law: from Milky Way clouds to high-redshift disk and starburst galaxies

Whilst the star formation rate (SFR) of molecular clouds and galaxies is key in understanding galaxy evolution, the physical processes which determine the SFR remain unclear. This uncertainty about the underlying physics has resulted in various different star formation laws, all having substantial intrinsic scatter. Extending upon previous works that define the column density of star formation (Sigma_SFR) by the gas column density (Sigma_gas), we develop a new universal star formation (SF) law based on the multi-freefall prescription of gas. This new SF law relies predominantly on the probability density function (PDF) and on the sonic Mach number of the turbulence in the star-forming clouds. By doing so we derive a relation where the star formation rate (SFR) correlates with the molecular gas mass per multi-freefall time, whereas previous models had used the average, single-freefall time. We define a new quantity called maximum (multi-freefall) gas consumption rate (MGCR) and show that the actual SFR is only about 0.4% of this maximum possible SFR, confirming the observed low efficiency of star formation. We show that placing observations in this new framework (Sigma_SFR vs. MGCR) yields a significantly improved correlation with 3-4 times reduced scatter compared to previous SF laws and a goodness-of-fit parameter R^2=0.97. By inverting our new relationship, we provide sonic Mach number predictions for kpc-scale observations of Local Group galaxies as well as unresolved observations of local and high-redshift disk and starburst galaxies that do not have independent, reliable estimates for the turbulent cloud Mach number.

astro-ph.GA↗

The density variance - Mach number relation in isothermal and non-isothermal adiabatic turbulence

The density variance - Mach number relation of the turbulent interstellar medium is relevant for theoretical models of the star formation rate, efficiency, and the initial mass function of stars. Here we use high-resolution hydrodynamical simulations with grid resolutions of up to 1024^3 cells to model compressible turbulence in a regime similar to the observed interstellar medium. We use Fyris Alpha, a shock-capturing code employing a high-order Godunov scheme to track large density variations induced by shocks. We investigate the robustness of the standard relation between the logarithmic density variance (sigma_s^2) and the sonic Mach number (M) of isothermal interstellar turbulence, in the non-isothermal regime. Specifically, we test ideal gases with diatomic molecular (gamma = 7/5) and monatomic (gamma = 5/3) adiabatic indices. A periodic cube of gas is stirred with purely solenoidal forcing at low wavenumbers, leading to a fully-developed turbulent medium. We find that as the gas heats in adiabatic compressions, it evolves along the relationship in the density variance - Mach number plane, but deviates significantly from the standard expression for isothermal gases. Our main result is a new density variance - Mach number relation that takes the adiabatic index into account: sigma_s^2 = ln {1+b^2*M^[(5*gamma+1)/3]} and provides good fits for b*M <= 1. A theoretical model based on the Rankine-Hugoniot shock jump conditions is derived, sigma_s^2 = ln {1+(gamma+1)*b^2*M^2/[(gamma-1)*b^2*M^2+2]}, and provides good fits also for b*M > 1. We conclude that this new relation for adiabatic turbulence may introduce important corrections to the standard relation, if the gas is not isothermal.

astro-ph.GA↗

Nonlinear closures for scale separation in supersonic magnetohydrodynamic turbulence

Turbulence in compressible plasma plays a key role in many areas of astrophysics and engineering. The extreme plasma parameters in these environments, e.g. high Reynolds numbers, supersonic and super-Alfvenic flows, however, make direct numerical simulations computationally intractable even for the simplest treatment -- magnetohydrodynamics (MHD). To overcome this problem one can use subgrid-scale (SGS) closures -- models for the influence of unresolved, subgrid-scales on the resolved ones. In this work we propose and validate a set of constant coefficient closures for the resolved, compressible, ideal MHD equations. The subgrid-scale energies are modeled by Smagorinsky-like equilibrium closures. The turbulent stresses and the electromotive force (EMF) are described by expressions that are nonlinear in terms of large scale velocity and magnetic field gradients. To verify the closures we conduct a priori tests over 137 simulation snapshots from two different codes with varying ratios of thermal to magnetic pressure ($β_\mathrm{p} = 0.25, 1, 2.5, 5, 25$) and sonic Mach numbers ($M_s = 2, 2.5, 4$). Furthermore, we make a comparison to traditional, phenomenological eddy-viscosity and $α-β-γ$ closures. We find only mediocre performance of the kinetic eddy-viscosity and $α-β-γ$ closures, and that the magnetic eddy-viscosity closure is poorly correlated with the simulation data. Moreover, three of five coefficients of the traditional closures exhibit a significant spread in values. In contrast, our new closures demonstrate consistently high correlation and constant coefficient values over time and and over the wide range of parameters tested. Important aspects in compressible MHD turbulence such as the bi-directional energy cascade, turbulent magnetic pressure and proper alignment of the EMF are well described by our new closures.

physics.flu-dyn↗

The density structure and star formation rate of non-isothermal polytropic turbulence

The interstellar medium of galaxies is governed by supersonic turbulence, which likely controls the star formation rate (SFR) and the initial mass function (IMF). Interstellar turbulence is non-universal, with a wide range of Mach numbers, magnetic fields strengths, and driving mechanisms. Although some of these parameters were explored, most previous works assumed that the gas is isothermal. However, we know that cold molecular clouds form out of the warm atomic medium, with the gas passing through chemical and thermodynamic phases that are not isothermal. Here we determine the role of temperature variations by modelling non-isothermal turbulence with a polytropic equation of state (EOS), where pressure and temperature are functions of gas density, P~rho^Gamma, T~rho^(Gamma-1). We use grid resolutions of 2048^3 cells and compare polytropic exponents Gamma=0.7 (soft EOS), Gamma=1 (isothermal EOS), and Gamma=5/3 (stiff EOS). We find a complex network of non-isothermal filaments with more small-scale fragmentation occurring for Gamma<1, while Gamma>1 smoothes out density contrasts. The density probability distribution function (PDF) is significantly affected by temperature variations, with a power-law tail developing at low densities for Gamma>1. In contrast, the PDF becomes closer to a lognormal distribution for Gamma<=1. We derive and test a new density variance - Mach number relation that takes Gamma into account. This new relation is relevant for theoretical models of the SFR and IMF, because it determines the dense gas mass fraction of a cloud, from which stars form. We derive the SFR as a function of Gamma and find that it decreases by a factor of ~5 from Gamma=0.7 to Gamma=5/3.

astro-ph.GA↗

The Turbulent Dynamo in Highly Compressible Supersonic Plasmas

The turbulent dynamo may explain the origin of cosmic magnetism. While the exponential amplification of magnetic fields has been studied for incompressible gases, little is known about dynamo action in highly-compressible, supersonic plasmas, such as the interstellar medium of galaxies and the early Universe. Here we perform the first quantitative comparison of theoretical models of the dynamo growth rate and saturation level with three-dimensional magnetohydrodynamical simulations of supersonic turbulence with grid resolutions of up to 1024^3 cells. We obtain numerical convergence and find that dynamo action occurs for both low and high magnetic Prandtl numbers Pm = nu/eta = 0.1-10 (the ratio of viscous to magnetic dissipation), which had so far only been seen for Pm >= 1 in supersonic turbulence. We measure the critical magnetic Reynolds number, Rm_crit = 129 (+43, -31), showing that the compressible dynamo is almost as efficient as in incompressible gas. Considering the physical conditions of the present and early Universe, we conclude that magnetic fields need to be taken into account during structure formation from the early to the present cosmic ages, because they suppress gas fragmentation and drive powerful jets and outflows, both greatly affecting the initial mass function of stars.

astro-ph.GA↗

Modeling jet and outflow feedback during star cluster formation

Powerful jets and outflows are launched from the protostellar disks around newborn stars. These outflows carry enough mass and momentum to transform the structure of their parent molecular cloud and to potentially control star formation itself. Despite their importance, we have not been able to fully quantify the impact of jets and outflows during the formation of a star cluster. The main problem lies in limited computing power. We would have to resolve the magnetic jet-launching mechanism close to the protostar and at the same time follow the evolution of a parsec-size cloud for a million years. Current computer power and codes fall orders of magnitude short of achieving this. In order to overcome this problem, we implement a subgrid-scale (SGS) model for launching jets and outflows, which demonstrably converges and reproduces the mass, linear and angular momentum transfer, and the speed of real jets, with ~ 1000 times lower resolution than would be required without SGS model. We apply the new SGS model to turbulent, magnetized star cluster formation and show that jets and outflows (1) eject about 1/4 of their parent molecular clump in high-speed jets, quickly reaching distances of more than a parsec, (2) reduce the star formation rate by about a factor of two, and (3) lead to the formation of ~ 1.5 times as many stars compared to the no-outflow case. Most importantly, we find that jets and outflows reduce the average star mass by a factor of ~ 3 and may thus be essential for understanding the characteristic mass of the stellar initial mass function.

astro-ph.SR↗

Collective outflow from a small multiple stellar system

The formation of high-mass stars is usually accompanied by powerful protostellar outflows. Such high-mass outflows are not simply scaled-up versions of their lower-mass counterparts, since observations suggest that the collimation degree degrades with stellar mass. Theoretically, the origins of massive outflows remain open to question because radiative feedback and fragmentation of the accretion flow around the most massive stars, with M > 15 M_Sun, may impede the driving of magnetic disk winds. We here present a three-dimensional simulation of the early stages of core fragmentation and massive star formation that includes a subgrid-scale model for protostellar outflows. We find that stars that form in a common accretion flow tend to have aligned outflow axes, so that the individual jets of multiple stars can combine to form a collective outflow. We compare our simulation to observations with synthetic H_2 and CO observations and find that the morphology and kinematics of such a collective outflow resembles some observed massive outflows, such as Cepheus A and DR 21. We finally compare physical quantities derived from simulated observations of our models to the actual values in the models to examine the reliability of standard methods for deriving physical quantities, demonstrating that those methods indeed recover the actual values to within a factor of 2-3.

astro-ph.SR↗

Unfolding the Laws of Star Formation: The Density Distribution of Molecular Clouds

The formation of stars shapes the structure and evolution of entire galaxies. The rate and efficiency of this process are affected substantially by the density structure of the individual molecular clouds in which stars form. The most fundamental measure of this structure is the probability density function of volume densities (rho-PDF), which determines the star formation rates predicted with analytical models. This function has remained unconstrained by observations. We have developed an approach to quantify rho-PDFs and establish their relation to star formation. The rho-PDFs instigate a density threshold of star formation and allow us to quantify the star formation efficiency above it. The rho-PDFs provide new constraints for star formation theories and correctly predict several key properties of the star-forming interstellar medium.

astro-ph.GA↗