arXiv subjects

Christoph Schwarzmeier

Publications and source records attributed to Christoph Schwarzmeier.

6 recordsLinked to original sources

arXiv2023

Particle-resolved simulation of antidunes in free-surface flows

The interaction of supercritical turbulent flows with granular sediment beds is challenging to study both experimentally and numerically; this challenging task has hampered the advances in understanding antidunes, the most characteristic bedform of supercritical flows. This article presents the first numerical attempt to simulate upstream-migrating antidunes with geometrically resolved particles and a liquid-gas interface. Our simulations provide data at a resolution higher than laboratory experiments, and they can therefore provide new insights into the mechanisms of antidune migration and contribute to a deeper understanding of the underlying physics. To manage the simulations' computational costs and physical complexity, we employ the cumulant lattice Boltzmann method in conjunction with a discrete element method for particle interactions, as well as a volume of fluid scheme to track the deformable free surface of the fluid. By reproducing two flow configurations of previous experiments (Pascal et al., Earth Surf. Proc. Land., vol. 46(9), 2021, 1750-1765), we demonstrate that our approach is robust and accurately predicts the antidunes' amplitude, wavelength, and celerity. Furthermore, the simulated wall-shear stress, a key parameter governing sediment transport, is in excellent agreement with the experimental measurements. The highly resolved data of fluid and particle motion from our simulation approach open new perspectives for detailed studies of morphodynamics in shallow supercritical flows.

physics.flu-dyn↗

arXiv2023

Analysis and comparison of boundary condition variants in the free-surface lattice Boltzmann method

The accuracy of the free-surface lattice Boltzmann method (FSLBM) depends significantly on the boundary condition employed at the free interface. Ideally, the chosen boundary condition balances the forces exerted by the liquid and gas pressure. Different variants of the same boundary condition are possible, depending on the number and choice of the particle distribution functions (PDFs) to which it is applied. This study analyzes and compares four variants, in which (i) the boundary condition is applied to all PDFs oriented in the opposite direction of the free interface's normal vector, including or (ii) excluding the central PDF. While these variants overwrite existing information, the boundary condition can also be applied (iii) to only missing PDFs without dropping available data or (iv) to only missing PDFs but at least three PDFs as suggested in the literature. It is shown that neither variant generally balances the forces exerted by the liquid and gas pressure at the free surface. The four variants' accuracy was compared in five different numerical experiments covering various applications. These include a standing gravity wave, a rectangular and cylindrical dam break, a rising Taylor bubble, and a droplet impacting a thin pool of liquid. Overall, variant (iii) was substantially more accurate than the other variants in the numerical experiments performed in this study.

physics.flu-dyn↗

arXiv2022

Comparison of free-surface and conservative Allen-Cahn phase-field lattice Boltzmann method

This study compares the free-surface lattice Boltzmann method (FSLBM) with the conservative Allen-Cahn phase-field lattice Boltzmann method (PFLBM) in their ability to model two-phase flows in which the behavior of the system is dominated by the heavy phase. Both models are introduced and their individual properties, strengths and weaknesses are thoroughly discussed. Six numerical benchmark cases were simulated with both models, including (i) a standing gravity and (ii) capillary wave, (iii) an unconfined rising gas bubble in liquid, (iv) a Taylor bubble in a cylindrical tube, and (v) the vertical and (vi) oblique impact of a drop into a pool of liquid. Comparing the simulation results with either analytical models or experimental data from the literature, four major observations were made. Firstly, the PFLBM selected was able to simulate flows purely governed by surface tension with reasonable accuracy. Secondly, the FSLBM, a sharp interface model, generally requires a lower resolution than the PFLBM, a diffuse interface model. However, in the limit case of a standing wave, this was not observed. Thirdly, in simulations of a bubble moving in a liquid, the FSLBM accurately predicted the bubble's shape and rise velocity with low computational resolution. Finally, the PFLBM's accuracy is found to be sensitive to the choice of the model's mobility parameter and interface width.

physics.flu-dyn↗

arXiv2022

Comparison of refilling schemes in the free-surface lattice Boltzmann method

Simulating mobile liquid-gas interfaces with the free-surface lattice Boltzmann method (FSLBM) requires frequent re-initialization of fluid flow information in computational cells that convert from gas to liquid. The corresponding algorithm, here referred to as the refilling scheme, is crucial for the successful application of the FSLBM in terms of accuracy and numerical stability. This study compares five refilling schemes that extract information from the surrounding liquid and interface cells by averaging, extrapolating, or assuming one of the three different equilibrium states. Six numerical experiments were performed, covering a broad spectrum of possible scenarios. These include a standing gravity wave, a rectangular and cylindrical dam break, a Taylor bubble, a drop impact into liquid, and a bubbly plane Poiseuille flow. In some simulations, the averaging, extrapolation, and one equilibrium-based scheme were numerically unstable. Overall, the results have shown that the simplest equilibrium-based scheme should be preferred in terms of numerical stability, computational cost, accuracy, and ease of implementation.

physics.flu-dyn↗

arXiv2019

waLBerla: A block-structured high-performance framework for multiphysics simulations

Programming current supercomputers efficiently is a challenging task. Multiple levels of parallelism on the core, on the compute node, and between nodes need to be exploited to make full use of the system. Heterogeneous hardware architectures with accelerators further complicate the development process. waLBerla addresses these challenges by providing the user with highly efficient building blocks for developing simulations on block-structured grids. The block-structured domain partitioning is flexible enough to handle complex geometries, while the structured grid within each block allows for highly efficient implementations of stencil-based algorithms. We present several example applications realized with waLBerla, ranging from lattice Boltzmann methods to rigid particle simulations. Most importantly, these methods can be coupled together, enabling multiphysics simulations. The framework uses meta-programming techniques to generate highly efficient code for CPUs and GPUs from a symbolic method formulation. To ensure software quality and performance portability, a continuous integration toolchain automatically runs an extensive test suite encompassing multiple compilers, hardware architectures, and software configurations.

cs.DC↗

arXiv2019

Validation and calibration of coupled porous-medium and free-flow problems using pore-scale resolved models

The correct choice of interface conditions and effective parameters for coupled macroscale free-flow and porous-medium models is crucial for a complete mathematical description of the problem under consideration and for accurate numerical simulation of applications. We consider single-fluid-phase systems described by the Stokes-Darcy model. Different sets of coupling conditions for this model are available. However, the choice of these conditions and effective model parameters is often arbitrary. We use large scale lattice Boltzmann simulations to validate coupling conditions by comparison of the macroscale simulations against pore-scale resolved models. We analyse two settings (lid driven cavity over a porous bed and infiltration problem) with different geometrical configurations (channelised and staggered distributions of solid grains) and different sets of interface conditions. Effective parameters for the macroscale models are computed numerically for each geometrical configuration. Numerical simulation results demonstrate the sensitivity of the coupled Stokes-Darcy problem to the location of the sharp fluid-porous interface, the effective model parameters and the interface conditions.

math.NA↗