arXiv subjects

Christoph Vogler

Publications and source records attributed to Christoph Vogler.

At least 37 records · Page 2Linked to original sources

arXiv2017

Contactless and absolute linear displacement detection based upon 3D printed magnets combined with passive radio-frequency identification

Within this work a passive and wireless magnetic sensor, to monitor linear displacements is proposed. We exploit recent advances in 3D printing and fabricate a polymer bonded magnet with a spatially linear magnetic field component corresponding to the length of the magnet. Regulating the magnetic compound fraction during printing allows specific shaping of the magnetic field distribution. A giant magnetoresistance magnetic field sensor is combined with a radio-frequency identification tag in order to passively monitor the exerted magnetic field of the printed magnet. Due to the tailored magnetic field, a displacement of the magnet with respect to the sensor can be detected within the sub-mm regime. The sensor design provides good flexibility by controlling the 3D printing process according to application needs. Absolute displacement detection using low cost components and providing passive operation, long term stability and longevity renders the proposed sensor system ideal for structural health monitoring applications.

physics.app-ph↗

arXiv2017

Noise reduction in heat-assisted magnetic recording by optimizing a high/low Tc bilayer structure

It is assumed that heat-assisted magnetic recording (HAMR) is the recording technique of the future. For pure hard magnetic grains in high density media with an average diameter of $5$nm and a height of $10$nm the switching probability is not sufficiently high for the use in bit-patterned media. Using a bilayer structure with 50$\%$ hard magnetic material with low Curie temperature and 50$\%$ soft magnetic material with high Curie temperature to obtain more than 99.2$\%$ switching probability, leads to very large jitter. We propose an optimized material composition to reach a switching probability of $P_{\mathrm{switch}}>99.2\%$ and simultaneously achieve the narrow transition jitter of pure hard magnetic material. Simulations with a continuous laser spot were performed with the atomistic simulation program VAMPIRE for a single cylindrical recording grain with a diameter of 5nm and a height of 10nm. Different configurations of soft magnetic material and different amounts of hard and soft magnetic material were tested and discussed. Within our analysis, a composition with 20$\%$ soft magnetic and $80\%$ hard magnetic material reaches the best results with a switching probability $P_{\mathrm{switch}}>99.2\%$, an off-track jitter parameter $σ_{\mathrm{off},80/20}=14.2$K and a down-track jitter parameter $σ_{\mathrm{down},80/20}=0.49$nm.

cond-mat.mtrl-sci↗

arXiv2017

A fast finite-difference algorithm for topology optimization of permanent magnets

We present a finite-difference method for the topology optimization of permanent magnets that is based on the FFT accelerated computation of the stray-field. The presented method employs the density approach for topology optimization and uses an adjoint method for the gradient computation. Comparsion to various state-of-the-art finite-element implementations shows a superior performance and accuracy. Moreover, the presented method is very flexible and easy to implement due to various preexisting FFT stray-field implementations that can be used.

physics.comp-ph↗

arXiv2017

A repulsive skyrmion chain as guiding track for a race track memory

A skyrmion racetrack design is proposed that allows for thermally stable skyrmions to code information and dynamical pinning sites that move with the applied current. This concept solves the problem of intrinsic distributions of pinning times and pinning currents of skyrmions at static geometrical or magnetic pinning sites. The dynamical pinning sites are realized by a skyrmion carrying wire, where the skyrmion repulsion is used in order to keep the skyrmions at equal distances. The information is coded by an additional layer where the presence and absence of a skyrmion is used to code the information. The lowest energy barrier for a data loss is calculated to be DE = 55 kBT300 which is sufficient for long time thermal stability.

cond-mat.mtrl-sci↗

arXiv2017

Back hopping in spin-transfer-torque devices, possible origin and counter measures

The effect of undesirable high-frequency free-layer switching in magnetic multilayer systems, referred to as back hopping, is investigated by means of the spin-diffusion model. A possible origin of the back-hopping effect is found to be the destabilization of the pinned layer which leads to perpetual switching of both layers. The influence of different material parameters on the critical switching currents for the free and pinned layer is obtained by micromagnetic simulations. It is found that the choice of a free-layer material with low polarization $β$ and saturation magnetization $M_s$, and a pinned-layer material with high $β$ and $M_s$ leads to a low free-layer critical current and a high pinned-layer critical current and hence reduces the likelihood of back hopping. While back hopping was observed in various types of devices, there are only few experiments that exhibit this effect in perpendicularly magnetized systems. However, our simulations suggest, that this is likely to change due to loss of pinned-layer anisotropy when decreasing device sizes.

physics.comp-ph↗

arXiv2017

AC noise reduction based on exchange coupled grains for heat-assisted-magnetic recording: The effect of an FeRh interlayer

High storage density and high data rate are two of the most desired properties of modern hard disk drives. Heat-assisted magnetic recording (HAMR) is believed to achieve both. Recording media, consisting of exchange coupled grains with a high and a low $T_{\mathrm{C}}$ part, were shown to have low DC noise, but increased AC noise, compared to hard magnetic single phase grains, like FePt [1]. In this work we extensively investigate the influence of an FeRh interlayer on the magnetic noise in exchange coupled grains. We find an optimal grain design that reduces the jitter in down-track direction by up to 30 % and in off-track direction by up to 50 %, depending on the head velocity, compared to the same structures without FeRh. Further, the mechanisms causing this jitter reduction are demonstrated. Additionally, we show that for ultrashort heat pulses and low write temperatures the switching time distribution of the analyzed grain structure is reduced by a factor of four, compared to the same structure without FeRh layer. This feature could be interesting for HAMR with a pulsed laser spot and could resume the discussion about this HAMR technique.

physics.comp-ph↗

arXiv2017

Efficiently reducing transition curvature in heat-assisted magnetic recording with state-of-the-art write heads

The curvature of bit transitions on granular media is a serious problem for the read-back process. We address this fundamental issue and propose a possibility to efficiently reduce transition curvatures with state-of-the-art heat-assisted magnetic recording (HAMR) heads. We compare footprints of conventional with those of the proposed head design on different media, consisting of exchange coupled and single phase grains. Additionally, we investigate the impact of various recording parameters, like the full width at half maximum (FWHM) of the applied heat pulse and the coercivity gradient near the write temperature of the recording grains. The footprints are calculated with a coarse grained model, based on the Landau-Lifshitz-Bloch (LLB) equation. The presented simulations show a transition curvature reduction of up to 40 %, in the case of a medium with exchange coupled grains and a heat pulse with a FWHM of 40 nm. We further give the reason for the straightening of the bit transitions, by means of basic considerations with regard to the effective recording time window (ERTW) of the write process. Besides the transition curvature reduction the proposed head design yields an improvement of the transition jitter in both down-track and off-track direction.

physics.comp-ph↗

arXiv2017

Significant reduction of critical currents in MRAM designs using dual free layer with perpendicular and in-plane anisotropy

One essential feature in MRAM cells is the spin torque efficiency, which describes the ratio of the critical switching current to the energy barrier. Within this paper it is reported that the spin torque efficiency can be improved by a factor of 3.2 by the use a of dual free layer device, which consists of one layer with perpendicular crystalline anisotropy and a second layer with in-plane crystalline anisotropy. Detailed simulations solving the spin transport equations simultaneously with the micromagnetics equation were performed in order to understand the origin of the switching current reduction by a factor of 4 for the dual layer structure compared to a single layer structure. The main reason could be attributed to an increased spin accumulation within the free layer due to the dynamical tilting of the magnetization within the in-plane region of the dual free layer.

physics.comp-ph↗

arXiv2017

Topology Optimized and 3D Printed Polymer Bonded Permanent Magnets for a Predefined External Field

Topology optimization offers great opportunities to design permanent magnetic systems that have specific external field characteristics. Additive manufacturing of polymer bonded magnets with an end-user 3D printer can be used to manufacture permanent magnets with structures that have been difficult or impossible to manufacture previously. This work combines these two powerful methods to design and manufacture permanent magnetic system with specific properties. The topology optimization framework is simple, fast, and accurate. It can be also used for reverse engineering of permanent magnets in order to find the topology from field measurements. Furthermore, a magnetic system that generate a linear external field above the magnet is presented. With a volume constraint the amount of magnetic material can be minimized without losing performance. Simulations and measurements of the printed system show a very good agreement.

cond-mat.mtrl-sci↗

arXiv2017

3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field

Additive manufacturing of polymer bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also new possibilities to create a specific stray field around the magnet are triggered. The current work presents a method to 3D print polymer bonded magnets with a variable magnetic compound density distribution. A low-cost, end-user 3D printer with a mixing extruder is used to mix permanent magnetic filaments with pure PA12 filaments. The magnetic filaments are compounded, extruded, and characterized for the printing process. To deduce the quality of the manufactured magnets with a variable compound density, an inverse stray field framework is used. The effectiveness of the printing process and the simulation method is shown. It can also be used to manufacture magnets that produce a predefined stray field in a given region. Examples for sensor applications are presented. This setup and simulation framework allows the design and manufacturing of polymer bonded permanent magnets which are impossible to create with conventional methods.

physics.ins-det↗

arXiv2016

Field- and damping-like spin-transfer torque in magnetic multilayers

We investigate the spin-transfer torque in a magnetic multilayer structure by means of a spin-diffusion model. The torque in the considered system, consisting of two magnetic layers separated by a conducting layer, is caused by a perpendicular-to-plane current. We compute the strength of the field-like and the damping-like torque for different material parameters and geometries. Our studies suggest that the field-like torque highly depends on the exchange coupling strength of the itinerant electrons with the magnetization both in the pinned and the free layer. While a low coupling leads to very high field-like torques, a high coupling leads to low or even negative field-like torques. The dependence of the different torque terms on system parameters is considered very important for the development of applications such as STT MRAM and spin-torque oscillators.

physics.comp-ph↗

arXiv2016

A self-consistent spin-diffusion model for micromagnetics

We propose a three-dimensional micromagnetic model that dynamically solves the Landau-Lifshitz-Gilbert equation coupled to the full spin-diffusion equation. In contrast to previous methods, we solve for the magnetization dynamics and the electric potential in a self-consistent fashion. This treatment allows for an accurate description of magnetization dependent resistance changes. Moreover, the presented algorithm describes both spin accumulation due to smooth magnetization transitions and due to material interfaces as in multilayer structures. The model and its finite-element implementation are validated by current driven motion of a magnetic vortex structure. In a second experiment, the resistivity of a magnetic multilayer structure in dependence of the tilting angle of the magnetization in the different layers is investigated. Both examples show good agreement with reference simulations and experiments respectively.

physics.comp-ph↗

arXiv2016

Solving Large-Scale Inverse Magnetostatic Problems using the Adjoint Method

An efficient algorithm for the reconstruction of the magnetization state within magnetic components is presented. The occurring inverse magnetostatic problem is solved by means of an adjoint approach, based on the Fredkin-Koehler method for the solution of the forward problem. Due to the use of hybrid FEM-BEM coupling combined with matrix compression techniques the resulting algorithm is well suited for large-scale problems. Furthermore the reconstruction of the magnetization state within a permanent magnet is demonstrated.

physics.comp-ph↗

arXiv2016

Influence of grain size and exchange interaction on the LLB modeling procedure

Reliably predicting bit-error rates in realistic heat-assisted magnetic recording simulations is a challenging task. Integrating the Landau-Lifshitz-Bloch (LLB) equation can reduce the computational effort to determine the magnetization dynamics in the vicinity of the Curie temperature. If one aims that these dynamics coincide with trajectories calculated from the atomistic Landau-Lifshitz-Gilbert equation, one has to carefully model required temperature dependent material functions such as the zero-field equilibrium magnetization as well as the parallel and normal susceptibilities. We present an extensive study on how these functions depend on grain size and exchange interactions. We show that, if the size or the exchange constant of a reference grain is modified, the material functions can be scaled, according to the changed Curie temperature, yielding negligible errors. This is shown to be valid for volume changes of up to $\pm 40$ % and variations of the exchange constant of up to $\pm10$ %. Besides the temperature dependent material curves, computed switching probabilities also agree well with probabilities separately determined for each system. Our study suggest that there is no need to recalculate the required LLB input functions for each particle. Within the presented limits it is sufficient to scale them to the Curie temperature of the altered system.

cond-mat.mtrl-sci↗

arXiv2016

Basic noise mechanisms of heat-assisted-magnetic recording

Heat-assisted magnetic recording (HAMR) is expected to be a key technology to significantly increase the areal storage density of magnetic recording devices. At high temperatures thermally induced noise becomes a major problem, which must be overcome in order to reliably write magnetic bits with narrow transitions. We propose an elementary model based on the effective recording time window (ERTW) to compute the switching probability of bits during HARM of bit-patterned media. With few assumptions this analytical model allows to gain deeper insights into the basic noise mechanisms like AC and DC noise. Finally, we discuss strategies to reduce noise and to increase the areal storage density of both bit-patterned as well as granular media.

cond-mat.mtrl-sci↗

arXiv2015

Areal density optimizations for heat-assisted-magnetic recording of high density bit-patterned media

Heat-assisted-magnetic recording (HAMR) is hoped to be the future recording technique for high density storage devices. Nevertheless, there exist several realizations strategies. With a coarse-grained Landau-Lifshitz-Bloch (LLB) model we investigate in detail benefits and disadvantages of continuous and pulsed laser spot recording of shingled and conventional bit-patterned media. Additionally we compare single phase grains and bits having a bilayer structure with graded Curie temperature, consisting of a hard magnetic layer with high $T_{\mathrm{C}}$ and a soft magnetic one with low $T_{\mathrm{C}}$, respectively. To describe the whole write process as realistic as possible a distribution of the grain sizes and Curie temperatures, a displacement jitter of the head and the bit positions are considered. For all these cases we calculate bit error rates of various grain patterns, temperatures and write head positions to optimize the achievable areal storage density. Within our analysis shingled HAMR with a continuous laser pulse moving over the medium reaches the best results, and thus having the highest potential to become the next generation storage device.

cond-mat.mtrl-sci↗

arXiv2015

Superior bit error rate and jitter due to improved switching field distribution in exchange spring magnetic recording

We report two effects that lead to a reduction of the switching field distribution in exchange spring media. The first effect relies on a subtle mechanism of the interplay between exchange coupling between soft and hard layers and anisotropy that allows significant reduction of the switching field distribution in exchange spring media. This effect reduces the switching field distribution by about 30% compared to single-phase media. A second effect is that due to the improved thermal stability of exchange spring media over single-phase media, thermal fluctuation leads to reduced fundamental transition jitter. The influence of this overall improved switching field distribution on the transition jitter in granular recording and the bit error rate in bit-patterned magnetic recording is discussed. The transition jitter in granular recording for a distribution of K1 values of 3% in the hard layer, taking into account thermal fluctuations during recording, is estimated to be a = 0.78 nm, which is similar to the best reported calculated jitter in optimized heat-assisted recording media.

cond-mat.mtrl-sci↗

arXiv2015

Heat assisted magnetic recording of bit patterned media beyond 10 Tb/in$^2$

The limits of the areal storage density as can be achieved with heat assisted magnetic recording (HAMR) are still an open issue. We want to address this central question and present the design of a possible bit patterned medium with an areal storage density above 10 Tb/in$^2$. The model uses hard magnetic recording grains with 5 nm diameter and 10 nm height. It assumes a realistic distribution of the Curie temperature of the underlying material as well as a realistic distribution of the grain size and the grain position. In order to compute the areal density we analyze the detailed switching behavior of a recording bit under different external conditions, which allows to compute the bit error rate of a recording process (shingled and conventional) for different grain spacings and write head positions. Hence, we are able to optimize the areal density of the presented medium.

cond-mat.mtrl-sci↗