arXiv subjects

Christophe Dujardin

Publications and source records attributed to Christophe Dujardin.

12 recordsLinked to original sources

arXiv2026

Development of Ultrafast and Radiation-Hard GAGG for the Next-Generation of High-Energy Physics Calorimeters

The evolution of High Energy Physics (HEP) toward future collider experiments with High Luminosity (HL), such as the HL-LHC, requires the development of scintillating materials that combine high density, excellent radiation hardness and an ultrafast response. While Cerium-doped Gadolinium Aluminum Gallium Garnet (GAGG:Ce) offers a very high light yield and resilience to irradiation, its typical decay time of approximately 50-60 ns may lead to pile-up effects in high-rate environments. In this paper, we report on the development and multi-stage characterization of various accelerated GAGG compositions optimized for timing performance and grown by Crytur. By taking advantage of divalent co-doping to engineer the scintillation kinetics, we achieved an effective decay time (tau_d,eff) down to 5.5 ns while maintaining a competitive light yield of several thousand photons per MeV. Laboratory characterization demonstrates that the time resolution under gamma-ray excitation is comparable to commercial GAGG, while the time resolution measured with 120 GeV pions reaches performance levels comparable to state-of-the-art LYSO:Ce,Ca. After a 1 MGy proton irradiation campaign the material retains most of its optical transmission. The results confirm that this ultrafast GAGG composition is a viable candidate for the next generation of HEP calorimetry and timing detectors.

physics.ins-det↗

arXiv2026

A Practical Noise2Noise Denoising Pipeline for High-Throughput Raman Spectroscopy

A lightweight and reproducible denoising pipeline for high-throughput Raman spectroscopy is presented. The approach relies on a one-dimensional convolutional autoencoder trained using a Noise2Noise strategy, requiring neither external spectral libraries nor high signal-to-noise reference spectra for training. From a reduced training subset composed of repeated short-exposure acquisitions, the model learns to reconstruct Raman spectra while efficiently suppressing stochastic noise. The method is evaluated on a heterogeneous mineral sample, using both quantitative spectral fidelity metrics (RMSE, SNR, SSIM) and task-oriented criteria based on unsupervised K-means classification. Results demonstrate that integration times as short as 5 ms per spectrum, which are typically insufficient for reliable interpretation, yield denoised spectra with high fidelity to the reference data while preserving chemically coherent maps. This work provides a practical trade-off between spectral quality and acquisition speed, enabling fast, adaptable Raman workflows compatible with routine laboratory use. It also offers a transferable framework for other one-dimensional spectroscopic modalities.

cs.AI↗

arXiv2025

Drastic reduction of the slow scintillation component in highly luminescent Ce3+ and Mg2+ doped Lu2.5Gd0.5Ga2Al3O12 garnet powders

This paper deals with the photochemical preparation of nanomaterials with garnet structure. Ce3+ and Mg2+ doped Lu2.5Gd0.5Ga2Al3O12 powders were prepared by using UV irradiation of aqueous solutions with low-pressure mercury lamps and subsequent calcination of the solid products. The synthesis was optimized and gives access to a range of doping which is very hard to achieve with single crystal growth from melt. The effect of Ce and Mg concentration on the structural and luminescence properties was studied. Garnets were analyzed using X-ray fluorescence (XRF) and X-ray powder diffraction (XRPD) and their luminescence properties under optical and X-ray photon excitations were investigated. XRF and XRD show that the samples are sufficiently chemically pure and phase-pure and their elemental composition corresponds with expectations. Laser-induced breakdown spectroscopy confirmed that Mg concentrations in Mg-codoped samples are slightly lower than the nominal. Luminescence spectra show typical emission maxima of 5d-4f Ce3+ transition and 4f-4f Gd3+ transition. The effects of the concentration of Ce3+ and Mg2+ on the RL intensity, light yields and decays were observed.

cond-mat.mtrl-sci↗

arXiv2024

Scaling Up Purcell-Enhanced Self-Assembled Nanoplasmonic Perovskite Scintillators into the Bulk Regime

Scintillators convert high-energy radiation into detectable photons and play a crucial role in medical imaging and security applications. The enhancement of scintillator performance through nanophotonics and nanoplasmonics, specifically using the Purcell effect, has shown promise but has so far been limited to ultrathin scintillator films because of the localized nature of this effect. This study introduces a method to expand the application of nanoplasmonic scintillators to the bulk regime. By integrating 100-nm-sized plasmonic spheroid and cuboid nanoparticles with perovskite scintillator nanocrystals, we enable nanoplasmonic scintillators to function effectively within bulk-scale devices. We experimentally demonstrate power and decay rate enhancements of up to (3.20 $\pm$ 0.20) and (4.20 $\pm$ 0.31) folds for plasmonic spheroid and cuboid nanoparticles, respectively, in a 5-mm thick CsPbBr$_{3}$ nanocrystal-polymer scintillator at RT. Theoretical modeling also predicts similar enhancements of up to (2.26 $\pm$ 0.31) and (3.02 $\pm$ 0.69) folds for the same nanoparticle shapes and dimensions. Moreover, we demonstrate a (2.07 $\pm$ 0.39) fold increase in light yield under $^{241}$Am $\gamma$-excitation. These findings provide a viable pathway for utilizing nanoplasmonics to enhance bulk scintillator devices, advancing radiation detection technology.

physics.optics↗

arXiv2023

The Nanoplasmonic Purcell Effect in Ultrafast and High-Light-Yield Perovskite Scintillators

The development of X-ray scintillators with ultrahigh light yields and ultrafast response times is a long sought-after goal. In this work, we theoretically predict and experimentally demonstrate a fundamental mechanism that pushes the frontiers of ultrafast X-ray scintillator performance: the use of nanoscale-confined surface plasmon polariton modes to tailor the scintillator response time via the Purcell effect. By incorporating nanoplasmonic materials in scintillator devices, this work predicts over 10-fold enhancement in decay rate and 38% reduction in time resolution even with only a simple planar design. We experimentally demonstrate the nanoplasmonic Purcell effect using perovskite scintillators, enhancing the light yield by over 120% to 88 $\pm$ 11 ph/keV, and the decay rate by over 60% to 2.0 $\pm$ 0.2 ns for the average decay time, and 0.7 $\pm$ 0.1 ns for the ultrafast decay component, in good agreement with the predictions of our theoretical framework. We perform proof-of-concept X-ray imaging experiments using nanoplasmonic scintillators, demonstrating 182% enhancement in the modulation transfer function at 4 line pairs per millimeter spatial frequency. This work highlights the enormous potential of nanoplasmonics in optimizing ultrafast scintillator devices for applications including time-of-flight X-ray imaging and photon-counting computed tomography.

physics.optics↗

arXiv2022

Needs, trends, and advances in scintillators for radiographic imaging and tomography

Scintillators are important materials for radiographic imaging and tomography (RadIT), when ionizing radiations are used to reveal internal structures of materials. Since its invention by Röntgen, RadIT now come in many modalities such as absorption-based X-ray radiography, phase contrast X-ray imaging, coherent X-ray diffractive imaging, high-energy X- and $γ-$ray radiography at above 1 MeV, X-ray computed tomography (CT), proton imaging and tomography (IT), neutron IT, positron emission tomography (PET), high-energy electron radiography, muon tomography, etc. Spatial, temporal resolution, sensitivity, and radiation hardness, among others, are common metrics for RadIT performance, which are enabled by, in addition to scintillators, advances in high-luminosity accelerators and high-power lasers, photodetectors especially CMOS pixelated sensor arrays, and lately data science. Medical imaging, nondestructive testing, nuclear safety and safeguards are traditional RadIT applications. Examples of growing or emerging applications include space, additive manufacturing, machine vision, and virtual reality or `metaverse'. Scintillator metrics such as light yield and decay time are correlated to RadIT metrics. More than 160 kinds of scintillators and applications are presented during the SCINT22 conference. New trends include inorganic and organic scintillator heterostructures, liquid phase synthesis of perovskites and $μ$m-thick films, use of multiphysics models and data science to guide scintillator development, structural innovations such as photonic crystals, nanoscintillators enhanced by the Purcell effect, novel scintillator fibers, and multilayer configurations. Opportunities exist through optimization of RadIT with reduced radiation dose, data-driven measurements, photon/particle counting and tracking methods supplementing time-integrated measurements, and multimodal RadIT.

physics.ins-det↗

arXiv2021

Doping MAPbBr$_3$ hybrid perovskites with CdSe/CdZnS quantum dots: from emissive thin-films to hybrid single-photon sources

We report the first doping of crystalline methylammonium lead bromide (MAPbBr$_3$) perovskite thin-films with CdSe/CdZnS core/shell quantum dots (QDs), using a soft-chemistry method that preserves their high quantum yield and other remarkable fluorescence properties. Our approach produces MAPbBr$_3$ films of 100 nm thickness doped at volume ratios between 0.025 and 5% with colloidal CdSe/CdZnS QDs whose organic ligands are exchanged with halide ions to allow for close contact between the QDs and the perovskite matrix. Ensemble photoluminescence (PL) measurements demonstrate the retained emission of the QDs after incorporation into the MAPbBr$_3$ matrix. Ensemble photoluminescence excitation (PLE) spectra exhibit signatures of wavelength-dependent coupling between the CdSe/CdZnS QDs and the MAPbBr$_3$ matrix. Spatially-resolved PL experiments reveal a strong correlation between the positions of QDs and an enhancement of the PL signal of the matrix. Fluorescence lifetime imaging (FLIM)of the doped films furthermore show that the emission lifetime of MAPbBr$_3$ is slower in the vicinity of QDs, which, in combination with the increased PL signal of the matrix, suggests that QDs can act as nucleation seeds that improve the crystallinity of MAPbBr$_3$, boosting its emission quantum yield. Antibunching measurements provide clear evidence of single-photon emission from individual QDs-in-perovskite. Finally, the analysis of blinking statistics indicates an improvement of the photostability of individual QDs in perovskite as compared to bare CdSe/CdZnS QDs. At high doping levels, this work opens the route to hybrid-based LEDs. Low-doping content would lead to hybrid single-photon sources embedded in field-effect devices to serve as an alternative to solid-state QDs and help building nanophotonic devices with high-quantum-yield CdSe-based QDs.

physics.chem-ph↗

arXiv2021

Optical Properties of Fully Inorganic, Spacer-Free Core/Gradient-Shell CdSe/CdZnS Nanocrystals at the Ensemble and Single-Nanocrystal Levels

We report the synthesis and optical characterization of fully inorganic gradientshell CdSe/CdZnS nanocrystals (NCs) with high luminescence quantum yield (QY, 50 percent), which were obtained by replacing native oleic-acid (OA) ligands with halide ions (Br and Cl). Absorption, photoluminescence excitation (PLE) and photoluminescence (PL) spectra in solution were unaffected by the ligand-exchange procedure. The halide-capped NCs were stable in solution for several weeks without modification of their PL spectra; once deposited as unprotected thin films and exposed to air, however, they did show signs of aging which we attribute to increasing heterogeneity of (effective) NC size. Time-resolved PL measurements point to the existence of four distinct emissive states, which we attribute to neutral, singlycharged and multi-excitonic entities. We found that the relative contribution of these four components to the overall PL decay is modified by the OA-to-halide ligand exchange, while the excited-state lifetimes themselves, surprisingly, remain largley unaffected. The high PL quantum yield of the halide-capped NCs allowed observation of single particle blinking and photon-antibunching; one surprising result was that aging processes that occurs during the first few days after deposition on glass seemed to offer a certain increased protection against photobleaching. These results suggest that halide-capped CdSe/CdZnS NCs are promising candidates for incorporation into opto-electronic devices, based on, for example, hybrid perovskite matrices, which require eliminating the steric hindrance and electronic barrier of bulky organic ligands to ensure efficient coupling.

cond-mat.mtrl-sci↗

arXiv2018

Particle detection at cryogenic temperatures with undoped CsI

Scintillation at cryogenic temperatures can give rise to detectors with particle discrimination for rare-event searches such as dark matter detection. We present time-resolved scintillation studies of Caesium Iodide (CsI) under excitation of both alpha and gamma particles over a long acquisition window of 1 ms to fully capture the scintillation decay between room temperature and 4 K. This allows a measurement of the light yield independent of any shaping time of the pulse. We find the light yield of CsI to increase up to two orders of magnitude from that of room temperature at cryogenic temperatures, and the quenching factor of alpha to gamma excitation to exceed 1 over a range of temperatures between 10 and 100 K. We also find the time structure of the emitted light to follow similar exponential decay time constants between alpha and gamma excitation, with the temperature behaviour consistent with a model of self-trapped exciton de-excitation.

physics.ins-det↗

arXiv2017

Atomistic Mechanisms for the Nucleation of Aluminium Oxide Nanoparticles

A predictive model for nanoparticle nucleation has not yet been successfully achieved. Classical nucleation theory fails because the atomistic nature of the seed has to be considered since geometrical structure as well as stoichiometry do not always match the bulk values. We present a fully microscopic approach based on a first-principle study of aluminium oxide clusters. We have calculated stable structures of AlxOy} and their associated thermodynamic properties. From these data, the chemical composition of a gas composed of aluminium and oxygen atoms can be calculated as a function of temperature, pressure, and aluminium to oxygen ratio. We demonstrate the accuracy of this approach in reproducing experimental results obtained with time resolved spectroscopy of a laser induced plasma from an Al2O3} target. We thus extended the calculation to lower temperatures, i.e. longer time scales, to propose a scenario of composition gas evolution leading to the first alumina seeds.

physics.chem-ph↗

arXiv2013

Shells of crystal field symmetries evidenced in oxide nano-crystals

By the use of a point charge model based on the Judd-Ofelt transition theory, the luminescence from Eu3+ ions embedded in Gd2O3 clusters is calculated and compared to the experimental data. The main result of the numerical study is that without invoking any other mechanisms such as crystal disorder, the pure geometrical argument of the symmetry breaking induced by the particle surface has influence on the energy level splitting. The modifications are also predicted to be observable in realistic conditions where unavoidable size dispersion has to be taken into account. The emission spectrum results from the contribution of three distinct regions, a cluster core, a cluster shell and a very surface, the latter being almost completely quenched in realistic conditions. Eventually, by detailing the spectra of the ions embedded at different positions in the cluster we get an estimate of about 0.5 nm for the extent of the crystal field induced Stark effect. Due to the similarity between Y2O3 and Gd2O3, these results apply also to Eu3+ doped Y2O3 nanoparticles.

cond-mat.mes-hall↗

arXiv2009

Facile and rapid synthesis of highly luminescent nanoparticles via Pulsed Laser Ablation in Liquid

This paper demonstrates the usefulness of pulsed laser ablation in liquids as a fast screening synthesis method able to prepare even complex compositions at the nanoscale. Nanoparticles of Y2O3:Eu3+, Lu2O2S: Eu3+, Gd2SiO5:Ce3+ and Lu3TaO7:Gd3+,Tb3+ are successfully synthesized by pulsed laser ablation in liquids. The phase and stoichiometries of the original materials are preserved while the sizes are reduced down to 5-10 nm. The optical properties of the materials are also preserved but show some small variations and some additional structures which are attributed to the specificities of the nanoscale (internal pressure, inhomogeneous broadening, surface states...)

cond-mat.mtrl-sci↗