arXiv subjects

Christopher C. Davis

Publications and source records attributed to Christopher C. Davis.

14 recordsLinked to original sources

arXiv2019

Randomized Spectral Sampling for Efficient Simulation of Laser Propagation through Optical Turbulence

We present a new method for the generation of atmospheric turbulence phase screens based on the frequency shift property of the Fourier transform. This method produces low spatial frequency distortions without additional computation time penalties associated with methods using subharmonic subgrids. It is demonstrated that for simulations of atmospheric turbulence with finite outer scales, the performance of our method with respect to the statistical phase structure function of the screen meets or exceeds other methods with respect to agreement with theory. We outline small-scale accuracy issues associated with modelling non-Kolmogorov spectral power laws using existing techniques, and propose a solution. For simulations of long-range propagation through atmospheric optical turbulence, our method provides various advantages over standard methods.

physics.optics↗

arXiv2018

Surface Wave-Based Underwater Radio Communication

An underwater portable radio antenna operating in the 50 MHz band and efficient for launching surface electromagnetic waves at the seawater/air interface is presented. The antenna operation is based on the field enhancement at the antenna tip and on an impedance matching antenna enclosure, which is filled with de-ionized water. This enclosure allows us to reduce antenna dimensions and improve the coupling of electromagnetic energy to the surrounding salt water medium. Since surface wave propagation length far exceeds the skin depth of conventional radio waves at the same frequency, this technique is useful for broadband underwater wireless communication over several meters distances.

eess.SP↗

arXiv2018

Object Detection and Geometric Profiling through Dirty Water Media Using Asymmetry Properties of Backscattered Signals

The scattering of light observed through the turbid underwater channel is often regarded as the leading challenge when designing underwater electro-optical imaging systems. There have been many approaches to address the effects of scattering such as using pulsed laser sources to reject scattered light temporally, or using intensity modulated waveforms and matched filters to remove the scattered light spectrally. In this paper, a new method is proposed which primarily uses the backscattering asymmetry property for object detection and geometric profiling. In our approach, two parallel and identical continuous wave (CW) laser beams with narrow beam widths (~2mm) are used as active illumination sources. The two beams also have controllable spacing and aiming angle, as well as initial phase difference for convenience of scanning and profiling a target. Through theory and experimental results, it will be shown that when an object leans or tilts towards one of the beam's central trajectory, the asymmetry in the backscattered signals can be used to indicate the location or slope of the target's surface, respectively. By varying the spacing or aiming angle of the two beams, a number of surface samples can be collected to reconstruct the object's shape geometrically. The resolution and range limit of our approach are also measured and reported in this work. In application, our proposed method provides an economic solution to perform imaging through turbid underwater environments. Additionally, the idea can be combined with the pulsed or modulated laser signals for enhanced imaging results.

physics.optics↗

arXiv2015

Using an incoherent target-return to adaptively focus through atmospheric turbulence

A laser beam propagating to a remote target through atmospheric turbulence acquires intensity fluctuations. If the target is cooperative and provides a coherent return beam, the phase measured near the beam transmitter and adaptive optics can, in principle, correct these fluctuations. Generally, however, the target is uncooperative. In this case, we show that an incoherent return from the target can be used instead. Using the principle of reciprocity, we derive a novel relation between the field at the target and the reflected field at a detector. We simulate an adaptive optics system that utilizes this relation to focus a beam through atmospheric turbulence onto the incoherent surface.

physics.optics↗

arXiv2015

Using Graph Theory and a Plenoptic Sensor to Recognize Phase Distortions of a Laser Beam

Atmospheric turbulence causes fluctuations in the local refractive index of air that accumulatively disturb a wave's phase and amplitude distribution as it propagates. This impairs the effective range of laser weapons as well as the performance of free space optical (FSO) communication systems. Adaptive optics (AO) can be applied to effectively correct wavefront distortions in weak turbulence situations. However, in strong or deep turbulence, where scintillation and beam breakup are common phenomena, traditional wavefront sensing techniques such as the use of Shack-Hartmann sensors lead to incorrect results. Consequently, the performance of AO systems will be greatly compromised. We propose a new approach that can determine the major phase distortions in a beam instantaneously and guide an AO device to compensate for the phase distortion in a few iterations. In our approach, we use a plenoptic wavefront sensor to image the distorted beam into its 4D phase space. A fast reconstruction algorithm based on graph theory is applied to recognize the phase distortion of a laser beam and command the AO device to perform phase compensation. As a result, we show in our experiments that an arbitrary phase distortion with peak to peak value up to 22π can be corrected within a few iteration steps. Scintillation and branch point problems are smartly avoided by the plenoptic sensor and its fast reconstruction algorithm. In this article, we will demonstrate the function of the plenoptic sensor, the fast reconstruction algorithm as well as the beam correction improvements when our approach is applied to an AO system.

physics.optics↗

arXiv2015

Determining the Phase and Amplitude Distortion of a Wavefront using a Plenoptic Sensor

We have designed a plenoptic sensor to retrieve phase and amplitude changes resulting from a laser beam's propagation through atmospheric turbulence. Compared with the commonly restricted domain of (-pi, pi) in phase reconstruction by interferometers, the reconstructed phase obtained by the plenoptic sensors can be continuous up to a multiple of 2pi. When compared with conventional Shack-Hartmann sensors, ambiguities caused by interference or low intensity, such as branch points and branch cuts, are less likely to happen and can be adaptively avoided by our reconstruction algorithm. In the design of our plenoptic sensor, we modified the fundamental structure of a light field camera into a mini Keplerian telescope array by accurately cascading the back focal plane of its object lens with a microlens array's front focal plane and matching the numerical aperture of both components. Unlike light field cameras designed for incoherent imaging purposes, our plenoptic sensor operates on the complex amplitude of the incident beam and distributes it into a matrix of images that are simpler and less subject to interference than a global image of the beam. Then, with the proposed reconstruction algorithms, the plenoptic sensor is able to reconstruct the wavefront and a phase screen at an appropriate depth in the field that causes the equivalent distortion on the beam. The reconstructed results can be used to guide adaptive optics systems in directing beam propagation through atmospheric turbulence. In this paper we will show the theoretical analysis and experimental results obtained with the plenoptic sensor and its reconstruction algorithms.

physics.optics↗

arXiv2007

Experimental Challenges Involved in Searches for Axion-Like Particles and Nonlinear Quantum Electrodynamic Effects by Sensitive Optical Techniques

We discuss the experimental techniques used to date for measuring the changes in polarization state of a laser produced by a strong transverse magnetic field acting in a vacuum. We point out the likely artifacts that can arise in such experiments, with particular reference to the recent PVLAS observations and the previous findings of the BFRT collaboration. Our observations are based on studies with a photon-noise limited coherent homodyne interferometer with a polarization sensitivity of 2x10^-8 rad Hz^(1/2) mW^(-1/2).

hep-th↗

arXiv2005

Experimental observation of speckle instability in nonlinear disordered media

Temporal fluctuations of the speckle pattern formed upon backscattering of a laser beam from an interface between gold and nonlinear polymer film have been observed as a function of optical power. The instability can be explained by coupling of laser light to surface plasmons and other guided modes, which experience multiple scattering while propagating in the film along the interface. The speckle pattern produced in this process is extremely sensitive to fluctuations of the scattering potential near the interface.

cond-mat.mes-hall↗

arXiv2005

Surface plasmon dielectric waveguides

We demonstrate that surface plasmon polaritons can be guided by nanometer scale dielectric waveguides. In a test experiment plasmons were coupled to a curved 3 micrometer radius dielectric stripe, which was 200 nm wide and 138 nm thick using a parabolic surface coupler. This experiment demonstrates that using surface plasmon polaritons the scale of optoelectronic devices based on dielectric waveguides can be shrunk by at least an order of magnitude.

cond-mat.mtrl-sci↗

arXiv2005

Immersion microscopy based on photonic crystal materials

Theoretical model of the enhanced optical resolution of the surface plasmon immersion microscope is developed, which is based on the optics of surface plasmon Bloch waves in the tightly bound approximation. It is shown that a similar resolution enhancement may occur in a more general case of an immersion microscope based on photonic crystal materials with either positive or negative effective refractive index. Both signs of the effective refractive index have been observed in our experiments with surface plasmon immersion microscope, which is also shown to be capable of individual virus imaging.

cond-mat.str-el↗

arXiv2005

Plasmon-polaritons on the surface of a pseudosphere

Plasmon-polariton behavior on the surfaces of constant negative curvature is considered. Analytical solutions for the eigenfrequencies and eigenfunctions are found, which describe resonant behavior of metal nanotips and nanoholes. These resonances may be used to improve performance of metal tips and nanoapertures in various scanning probe microscopy and surface-enhanced spectroscopy techniques.

cond-mat.str-el↗

arXiv2004

Far-field optical microscope with nanometer-scale resolution

The resolution of far-field optical microscopes, which rely on propagating optical modes, is widely believed to be limited because of diffraction to a value on the order of a half-wavelength $λ/2$ of the light used. Although immersion microscopes have slightly improved resolution on the order of $λ/2n$, the increased resolution is limited by the small range of refractive indices n of available transparent materials. Here we demonstrate a new far-field optical microscope design, which is capable of reaching nanometer-scale resolution. This microscope uses the fact that the effective refractive index $n_{eff}$ of a planar dielectric lens or mirror placed on a metal surface may reach extremely large values, up to $10^3$, as seen by propagating surface optical modes (plasmons). In our design a magnified planar image produced originally by surface plasmons in the metal plane is viewed by a regular microscope. Thus, the theoretical diffraction limit on resolution is pushed down to nanometer-scale $λ/2n_{eff}$ values. Used in reverse, such a microscope may become an optical lithography tool with nanometer-scale spatial resolution.

cond-mat.mtrl-sci↗

arXiv2003

Surface plasmon toy-models of black holes and wormholes

Surface plasmons at metal interfaces are collective excitations of the conduction electrons and the electromagnetic field. They exist in "curved three-dimensional space-times" defined by the shape of the metal surface and the spatial distribution of the dielectric constant near the surface. Here we show that surface plasmon toy models of many non-trivial space-time metrics, such as wormholes and black holes, can be easily built and studied in experiments. For example, a droplet of dielectric on the metal surface behaves as a black hole for surface plasmons within a substantial frequency range. On the other hand, a nanohole in a thin metal membrane may be treated as a wormhole connecting two "flat" surface plasmon worlds located on the opposite interfaces of the membrane.

gr-qc↗

arXiv1999

Giant Enhancement of Surface Second Harmonic Generation in BaTiO_3 due to Photorefractive Surface Wave Excitation

We report observation of strongly enhanced surface SHG in BaTiO_3 due to excitation of a photorefractive surface electromagnetic wave. Surface SH intensity may reach 10^{-2} of the incident fundamental light intensity. Angular, crystal orientation and polarization dependencies of this SHG are presented. Possible applications of this effect in nonlinear surface spectroscopy are discussed.

cond-mat.mtrl-sci↗