arXiv subjects

Christopher J. Howland

Publications and source records attributed to Christopher J. Howland.

13 recordsLinked to original sources

arXiv2026

Transition from classical to ultimate melting

Melting is omnipresent in nature and technology, with applications ranging from metallurgy, biology, food science, and latent thermal energy storage to oceanography, geophysics, and climate science, and occurring on all scales from sub-millimeter to global scales. The key objective is to understand the rate at which an object melts as a function of its size and of the ambient conditions. To achieve this it is important to be able to extrapolate from small scale experiments and observations to large or even global scales. This is done by scaling laws. However, these are only meaningful if there is no transition from one scaling relation to another one. Here we show, however, that for both fixed and freely-advected melting objects immersed in a turbulent flow a melting transition does exist, namely from slow melting at the small scales to fast melting at the large scales. We do so by controlled melting experiments and corresponding direct numerical simulations, covering four orders of magnitude in scale. The transition corresponds to the transition from a laminar-type boundary layer around the melting object to a turbulent-type boundary layer, i.e., from so-called classical turbulence to ultimate turbulence, with its enhanced transport properties. Our results thus provide a quantitative understanding of the flow physics of the melting process and thereby enable a better extrapolation and prediction of melt rates on large scales such as relevant in geophysics, oceanography, and climate science.

physics.flu-dyn↗

arXiv2025

Bistability in radiatively heated melt ponds

Melting and solidification processes, intertwined with convective flows, play a fundamental role in geophysical contexts. One of these processes is the formation of melt ponds on glaciers, ice shelves, and sea ice. It is driven by solar radiation and is of great significance for the Earth's heat balance, as it significantly lowers the albedo. Through direct numerical simulations and theoretical analysis, we unveil a bistability phenomenon in the melt pond dynamics. As solar radiation intensity and the melt pond's initial depth vary, an abrupt transition occurs: This tipping point transforms the system from a stable fully frozen state to another stable equilibrium state, characterized by a distinct melt pond depth. The physics of this transition can be understood within a heat flux balance model, which exhibits excellent agreement with our numerical results. Together with the Grossmann-Lohse theory for internally heated convection, the model correctly predicts the bulk temperature and the flow strength within the melt ponds, offering insight into the coupling of phase transitions with adjacent turbulent flows and the interplay between convective melting and radiation-driven processes.

physics.flu-dyn↗

arXiv2024

A front-tracking immersed-boundary framework for simulating Lagrangian melting problems

In so-called Lagrangian melting problems, a solid immersed in a fluid medium is free to rotate and translate in tandem with its phase-change from solid to liquid. Such configurations may be classified as a fluid-solid interaction (FSI) problem coupled to phase-change. Our present work proposes a numerical method capable of simulating these Lagrangian melting problems and adopts a front-tracking immersed-boundary (IB) method. We use the moving least squares IB framework, a well-established method for simulating a diverse range of FSI problems and extend this framework to accommodate melting by additionally imposing the Stefan condition at the interface. In the spirit of canonical front-tracking methods, the immersed solid is represented by a discrete triangulated mesh which is separate from the Eulerian mesh in which the governing flow equations are solved. A known requirement for these methods is the need for comparable Eulerian and Lagrangian grid spacings to stabilise interpolation and spreading operations between the two grids. For a melting object, this requirement is inevitably violated unless interventional remeshing is introduced. Our work therefore presents a novel dynamic remeshing procedure to overcome this. The remeshing is based on a gradual coarsening of the triangulated Lagrangian mesh and amounts to a negligible computational burden per timestep owing to the incremental and local nature of its operations, making it a scalable approach. Moreover, the coarsening is coupled to a volume-conserving smoothing procedure detailed by Kuprat et al. (2001), ensuring a zero net volume change in the remeshing step to machine precision. This added feature makes our present method highly specialised to the study of melting problems, where precise measurements of the melting solid's volume is often the primary predictive quantity of interest.

physics.flu-dyn↗

arXiv2024

Turbulent mixed convection in vertical and horizontal channels

Turbulent shear flows driven by a combination of a pressure gradient and buoyancy forcing are investigated using direct numerical simulations. Specifically, we consider the setup of a differentially heated vertical channel subject to a Poiseuille-like horizontal pressure gradient. We explore the response of the system to its three control parameters: the Grashof number $Gr$, the Prandtl number $Pr$, and the Reynolds number $Re$ of the pressure-driven flow. From these input parameters, the relative strength of buoyancy driving to the pressure gradient can be quantified by the Richardson number $Ri=Gr/Re^2$. We compare the response of the mixed vertical convection configuration to that of mixed Rayleigh-B\'enard convection and find a nearly identical behaviour, including an increase in wall friction at higher $Gr$ and a drop in the heat flux relative to natural convection for $Ri=O(1)$. This closely matched response is despite vastly different flow structures in the systems. No large-scale organisation is visible in visualisations of mixed vertical convection - an observation that is quantitatively confirmed by spectral analysis. This analysis, combined with a statistical description of the wall heat flux, highlights how moderate shear suppresses the growth of small-scale plumes and reduces the likelihood of extreme events in the local wall heat flux. Vice versa, starting from a pure shear flow, the addition of thermal driving enhances the drag due to the emission of thermal plumes.

physics.flu-dyn↗

arXiv2024

Scaling relations for heat and momentum transport in sheared Rayleigh-B\'enard convection

We provide scaling relations for the Nusselt number $Nu$ and the friction coefficient $C_{S}$ in sheared Rayleigh-B\'enard convection, i.e., in Rayleigh-B\'enard flow with Couette or Poiseuille type shear forcing, by extending the Grossmann & Lohse (2000,2001,2002,2004) theory to sheared thermal convection. The control parameters for these systems are the Rayleigh number $Ra$, the Prandtl number $Pr$, and the Reynolds number $Re_S$ that characterises the strength of the imposed shear. By direct numerical simulations and theoretical considerations, we show that in turbulent Rayleigh-B\'enard convection, the friction coefficients associated with the applied shear and the shear generated by the large-scale convection rolls are both well described by Prandtl's (1932) logarithmic friction law, suggesting some kind of universality between purely shear driven flows and thermal convection. These scaling relations hold well for $10^6 \leq Ra \leq 10^8$, $0.5 \leq Pr \leq 5.0$, and $0 \leq Re_S \leq 10^4$.

physics.flu-dyn↗

arXiv2023

Towards the understanding of convective dissolution in confined porous media: thin bead pack experiments, two-dimensional direct numerical simulations and physical models

We consider the process of convective dissolution in homogeneous and isotropic porous media. The flow is unstable due to the presence of a solute that induces a density difference responsible for driving the flow. The mixing dynamics is thus driven by a Rayleigh-Taylor instability at the pore scale. We investigate the flow at the scale of the pores using Hele-Shaw type experiment with bead packs, 2D DNS and physical models. Experiments and simulations have been specifically designed to mimic the same flow conditions, namely matching porosities, high Schmidt numbers, and linear dependency of fluid density with solute concentration. In addition, the solid obstacles of the medium are impermeable to fluid and solute. We characterise the evolution of the flow via the mixing length, which quantifies the extension of the mixing region and grows linearly in time. The flow structure, analysed via the centre-line mean wavelength, is observed to grow in agreement with theoretical predictions. Finally, we analyse the dissolution dynamics of the system, quantified through the mean scalar dissipation, and three mixing regimes are observed: (i) The evolution is controlled by diffusion, which produces solute mixing across the initial horizontal interface; (ii) when the interfacial diffusive layer is sufficiently thick, it becomes unstable, forming finger-like structures and driving the system into a convection-dominated phase; (iii) when the fingers have grown sufficiently to touch the horizontal boundaries of the domain, the mixing reduces dramatically due to the absence of fresh unmixed fluid. With simple physical models, we explain the physics of the results obtained numerically and experimentally. The solute evolution presents a self-similar behaviour, and it is controlled by different length scales in each stage of the mixing process, namely length scale of diffusion, pore size, and domain height.

physics.flu-dyn↗

arXiv2023

Shape effect on ice melting in flowing water

Iceberg melting is a critical factor for climate change, contributing to rising sea levels and climate change. However, the shape of an iceberg is an often neglected aspect of its melting process. Our study investigates the influence of different ice shapes and ambient flow velocities on melt rates by conducting direct numerical simulations. Our study focuses on the ellipsoidal shape, with the aspect ratio as the control parameter. It plays a crucial role in the melting process, resulting in significant variations in the melt rate between different shapes. Without flow, the optimal shape for a minimal melt rate is the disk (2D) or sphere (3D), due to the minimal surface area. However, as the ambient flow velocity increases, the optimal shape changes with the aspect ratio. We find that ice with an elliptical shape (when the long axis is aligned with the flow direction) can melt up to 10\% slower than a circular shape when exposed to flowing water. We provide a quantitative theoretical explanation for this optimal shape, based on the competition between surface area effects and convective heat transfer effects. Our findings provide insight into the interplay between phase transitions and ambient flows, contributing to our understanding of the iceberg melting process and highlighting the need to consider the aspect ratio effect in estimates of iceberg melt rates.

physics.flu-dyn↗

arXiv2023

Ice melting in salty water: layering and non-monotonic dependence on the mean salinity

The presence of salt in ocean water strongly affects the melt rate and the shape evolution of ice, both of utmost relevance in geophysical and ocean flow and thus for the climate. To get a better quantitative understanding of the physical mechanics at play in ice melting in salty water, we numerically investigate the lateral melting of an ice block in stably stratified saline water, using a realistic, nonlinear equation of state (EOS). The developing ice shape from our numerical results shows good agreement with the experiments and theory from Huppert & Turner (J. Fluid Mech. 100, 367 (1980)). Furthermore, we find that the melt rate of ice depends non-monotonically on the mean ambient salinity: It first decreases for increasing salt concentration until a local minimum is attained, and then increases again. This non-monotonic behavior of the ice melt rate is due to the competition among salinity-driven buoyancy, temperature-driven buoyancy, and salinity-induced stratification. We develop a theoretical model based on the energy balance which gives a prediction of the salt concentration for which the melt rate is minimal, and is consistent with our data. Our findings give insight into the interplay between phase transitions and double-diffusive convective flows.

physics.flu-dyn↗

arXiv2023

Double-diffusive transport in multicomponent vertical convection

Motivated by the ablation of vertical ice faces in salt water, we use three-dimensional direct numerical simulations to investigate the heat and salt fluxes in two-scalar vertical convection. For parameters relevant to ice-ocean interfaces in the convection-dominated regime, we observe that the salinity field drives the convection and that heat is essentially transported as a passive scalar. By varying the diffusivity ratio of heat and salt (i.e., the Lewis number $Le$), we identify how the different molecular diffusivities affect the scalar fluxes through the system. Away from the walls, we find that the heat transport is determined by a turbulent Prandtl number of $Pr_t\approx 1$ and that double-diffusive effects are practically negligible. However, the difference in molecular diffusivities plays an important role close to the boundaries. In the (unrealistic) case where salt diffused faster than heat, the ratio of salt-to-heat fluxes would scale as $Le^{1/3}$, consistent with classical nested scalar boundary layers. However, in the realistic case of faster heat diffusion (relative to salt), we observe a transition towards a $Le^{1/2}$ scaling of the ratio of the fluxes. This coincides with the thermal boundary layer width growing beyond the thickness of the viscous boundary layer. We find that this transition is not determined by a critical Lewis number, but rather by a critical Prandtl number $Pr\approx 10$, slightly below that for cold seawater where $Pr=14$. We compare our results to similar studies of sheared and double-diffusive flow under ice shelves, and discuss the implications for fluxes in large-scale ice-ocean models. By coupling our results to ice-ocean interface thermodynamics, we describe how the flux ratio impacts the interfacial salinity, and hence the strength of solutal convection and the ablation rate.

physics.flu-dyn↗

arXiv2021

Boundary layers in turbulent vertical convection at high Prandtl number

Many environmental flows arise due to natural convection at a vertical surface, from flows in buildings to dissolving ice faces at marine-terminating glaciers. We use three-dimensional direct numerical simulations of a vertical channel with differentially heated walls to investigate such convective, turbulent boundary layers. Through the implementation of a multiple-resolution technique, we are able to perform simulations at a wide range of Prandtl numbers $Pr$. This allows us to distinguish the parameter dependences of the horizontal heat flux and the boundary layer widths in terms of the Rayleigh number $Ra$ and Prandtl number $Pr$. For the considered parameter range $1\leq Pr \leq 100$, $10^6 \leq Ra \leq 10^9$, we find the flow to be consistent with a 'buoyancy-controlled' regime where the heat flux is independent of the wall separation. For given $Pr$, the heat flux is found to scale linearly with the friction velocity $V_\ast$. Finally, we discuss the implications of our results for the parameterisation of heat and salt fluxes at vertical ice-ocean interfaces.

physics.flu-dyn↗

arXiv2021

Shear-induced breaking of internal gravity waves

Motivated by observations of turbulence in the strongly stratified ocean thermocline, we use direct numerical simulations to investigate the interaction of a sinusoidal shear flow and a large-amplitude internal gravity wave. Despite strong nonlinearities in the flow and a lack of scale separation, we find that linear ray tracing theory is qualitatively useful in describing the early development of the flow as the wave is refracted by the shear. Consistent with the linear theory, the energy of the wave accumulates in regions of negative mean shear where we observe evidence of convective and shear instabilities. Streamwise-aligned convective rolls emerge the fastest, but their contribution to irreversible mixing is dwarfed by shear-driven billow structures that develop later. Although the wave strongly distorts the buoyancy field on which these billows develop, the mixing efficiency of the subsequent turbulence is similar to that arising from Kelvin-Helmholtz instability in a stratified shear layer. We run simulations at Reynolds numbers of 5000 and 8000, and vary the initial amplitude of the internal gravity wave. For high values of initial wave amplitude, the results are qualitatively independent of $Re$. Smaller initial wave amplitudes delay the onset of the instabilities, and allow for significant laminar diffusion of the internal wave, leading to reduced turbulent activity. We discuss the complex interaction between the mean flow, internal gravity wave and turbulence, and its implications for internal wave-driven mixing in the ocean.

physics.flu-dyn↗

arXiv2020

Quantifying mixing and available potential energy in vertically periodic simulations of stratified flows

Turbulent mixing exerts a significant influence on many physical processes in the ocean. In a stably stratified Boussinesq fluid, this irreversible mixing describes the conversion of available potential energy (APE) to background potential energy (BPE). In some settings the APE framework is difficult to apply and approximate measures are used to estimate irreversible mixing. For example, numerical simulations of stratified turbulence often use triply periodic domains to increase computational efficiency. In this setup however, BPE is not uniquely defined and the method of Winters et al. (1995, J. Fluid Mech., 289) cannot be directly applied to calculate the APE. We propose a new technique to calculate APE in periodic domains with a mean stratification. By defining a control volume bounded by surfaces of constant buoyancy, we can construct an appropriate background buoyancy profile $b_\ast(z,t)$ and accurately quantify diapycnal mixing in such systems. This technique also permits the accurate calculation of a finite amplitude local APE density in periodic domains. The evolution of APE is analysed in various turbulent stratified flow simulations. We show that the mean dissipation rate of buoyancy variance $χ$ provides a good approximation to the mean diapycnal mixing rate, even in flows with significant variations in local stratification. When quantifying measures of mixing efficiency in transient flows, we find significant variation depending on whether laminar diffusion of a mean flow is included in the kinetic energy dissipation rate. We discuss how best to interpret these results in the context of quantifying diapycnal diffusivity in real oceanographic flows.

physics.flu-dyn↗

arXiv2016

It's harder to splash on soft solids

Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70\% more kinetic energy to splash than they do on rigid substrates. We show that this is due to energy losses caused by deformations of soft substrates during the first few microseconds of impact. We find that solids with Young's moduli $\lesssim 100$kPa reduce splashing, in agreement with simple scaling arguments. Thus materials like soft gels and elastomers can be used as simple coatings for effective splash prevention. Soft substrates also serve as a useful system for testing splash-formation theories and sheet-ejection mechanisms, as they allow the characteristics of ejection sheets to be controlled independently of the bulk impact dynamics of droplets.

physics.flu-dyn↗