arXiv subjects

Christopher Panuski

Publications and source records attributed to Christopher Panuski.

10 recordsLinked to original sources

arXiv2026

Monolithic Integration of Piezo-Optomechanical Photonics and CMOS Electronics

Next-generation photonic architectures for AI, sensing, and quantum computing require thousands to millions of reprogrammable photonic devices on a chip[1]. The monolithic integration of Electronically-backed Photonic Integrated Circuits (EPICs) allows for very high density electrical interconnection and electronic drivers that can scale with photonics. Piezo-optomechanical photonic integrated circuits (POMPICs) offer low power consumption, high speed modulation, cryogenic compatibility and broadband optical transparency from ultraviolet to infrared wavelengths[2,3], but have not been demonstrated with monolithically integrated CMOS electronics. Here, we show a fully monolithic, all-CMOS fabricated platform for POMPICs co-fabricated with commercial control electronics. 200 millimeter photonic wafers are constructed directly on completed CMOS driver wafers by back-end-of-line processing, connecting integrated piezoelectric actuators under broadband silicon nitride waveguides to a high-density digital backplane comprising >2 million electrical connections per die with 6.4x6.4 micron electrode pitch. We introduce segmented POMPIC components as Photonic Digital-to-Analog converters (PDACs) that convert low-voltage digital electronic signals to multi-bit analog optical phase and amplitude modulation, and we demonstrate parallel control of optical phase shifters, Mach-Zehnder interferometers, optical routing trees, and tunable ring resonators using a standard HDMI interface to program CMOS electronics. We test multiple reticles and perform electronic and photonic characterization across the entire wafer to establish uniformity and yield, demonstrating wafer-scale integration of POMPICs on an electronic backplane and enabling dense, scalable electronic control of piezo-optomechanical circuits.

physics.optics↗

arXiv2025

Full-volume aberration-space holography

Simultaneous, diffraction-limited control of multiple optical beams is crucial for applications ranging from lithography to optogenetics, deep tissue imaging, and tweezer-based manipulation of cells, particles, or atoms. Despite the desire to address wider fields of view, deeper volumes, and increasingly-disordered media, spatially-varying aberrations currently restrict parallelized steering to a limited "isoplanatic" region over which the point spread function is invariant. Here, we overcome this limitation by combining individual propagation kernels accounting for site-specific aberrations into a single spatial light modulator (SLM) hologram. This "aberration-space holography" unlocks precise, parallel holographic shaping over the SLM's entire Nyquist-limited volume, enabling us to realize full-field, anisoplanatic aberration compensation for the first time. By simultaneously correcting 50 isoplanatic patches with 8 principal aberration modes, we demonstrate a full-field optical tweezer array with 8x larger field of view than the best isoplanatic correction. Extending to 3D, we increase the volume of a multiphoton volumetric display by 12x. These performance enhancements are immediately accessible to a diverse range of applications through our open-source software implementation, which combines aberration-space holography with automated experimental feedback, wavefront calibration, and alignment.

physics.optics↗

arXiv2025

End-to-end physics-based modeling of laser-activated color centers in silicon

Color centers are among the most promising candidates for quantum information processing. Central requirements for their practical applications include controlled and efficient local activation in nanophotonic devices and identical spectral features. However, producing color centers in a controlled and reliable way is inherently challenging due to the lack of comprehensive theoretical insights into their formation and the difficulty of streamlining the generation process for rapid in-situ optimization. We address these challenges by developing an end-to-end first-principles model that captures the underlying formation process of color centers. Emitters are activated through laser annealing, which allows for in-situ creation and the possibility of model-based control. Notably, our model enables the estimation of the emitters' inhomogeneous broadening down to 16 GHz in bare silicon, which translates into the creation of emitters with highly similar spectral properties. Finally, we address the challenge of in-situ deterministic activation of color centers in nanophotonic devices by going beyond bare silicon and demonstrating successful laser writing in photonic crystal optical cavities. These results lay the foundation for deterministic and large-scale integration of color centers within quantum photonic platforms.

physics.optics↗

arXiv2024

Piezoelectrically actuated high-speed spatial light modulator for visible to near-infrared wavelengths

Advancements in light modulator technology have been driving discoveries and progress across various fields. The problem of large-scale coherent optical control of atomic quantum systems-including cold atoms, ions, and solid-state color centers-presents among the most stringent requirements. This motivates a new generation of high-speed large-scale modulator technology with the following requirements: (R1) operation at a design wavelength of choice in the visible (VIS) to near-infrared (NIR) spectrum, (R2) a scalable technology with a high channel density (> 100mm-2 ), (R3) a high modulation speed (> 100MHz), and (R4) a high extinction ratio (> 20 dB). To fulfill these requirements, we introduce a modulator technology based on piezoelectrically actuated silicon nitride resonant waveguide gratings fabricated on 200mm diameter silicon wafers with CMOS compatible processes. We present a proof-of-concept device with 4 x 4 individually addressable 50 {mu}m x 50 {mu}m pixels or channels, each containing a resonant waveguide grating with a ~ 780 nm design wavelength, supporting > 100MHz modulation speeds, and a spectral response with > 20 dB extinction.

physics.optics↗

arXiv2024

Transfer printing micro-assembly of silicon photonic crystal cavity arrays: beating the fabrication tolerance limit

Photonic crystal cavities (PhCCs) can confine optical fields in ultra-small volumes, enabling efficient light-matter interactions for quantum and non-linear optics, sensing and all-optical signal processing. The inherent nanometric tolerances of micro-fabrication platforms can induce cavity resonant wavelength shifts two-orders of magnitude larger than cavity linewidths, prohibiting fabrication of arrays of nominally identical devices. We address this device variability by fabricating PhCCs as releasable pixels that can be transferred from their native substrate to a receiver where ordered micro-assembly can overcome the inherent fabrication variance. We demonstrate the measurement, binning and transfer of 119 PhCCs in a single session, producing spatially ordered arrays of PhCCs, sorted by resonant wavelength. Furthermore, the rapid in-situ measurement of the devices enables measurements of the PhCCs dynamic response to the print process for the first time, showing plastic and elastic effects in the seconds to hours range.

physics.optics↗

arXiv2023

Cavity-enhanced single artificial atoms in silicon

Artificial atoms in solids are leading candidates for quantum networks, scalable quantum computing, and sensing, as they combine long-lived spins with mobile and robust photonic qubits. The central requirements for the spin-photon interface at the heart of these systems are long spin coherence times and efficient spin-photon coupling at telecommunication wavelengths. Artificial atoms in silicon have a unique potential to combine the long coherence times of spins in silicon with telecommunication wavelength photons in the world's most advanced microelectronics and photonics platform. However, a current bottleneck is the naturally weak emission rate of artificial atoms. An open challenge is to enhance this interaction via coupling to an optical cavity. Here, we demonstrate cavity-enhanced single artificial atoms at telecommunication wavelengths in silicon. We optimize photonic crystal cavities via inverse design and show controllable cavity-coupling of single G-centers in the telecommunications O-band. Our results illustrate the potential to achieve a deterministic spin-photon interface in silicon at telecommunication wavelengths, paving the way for scalable quantum information processing.

quant-ph↗

arXiv2022

An integrated photonic engine for programmable atomic control

Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to the application of arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, these material platforms for high-speed telecom integrated photonics are not transparent at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic architecture for multi-channel quantum control using integrated, visible-light modulators based on thin-film lithium niobate. Our approach combines techniques in free-space optics, holography, and control theory together with a sixteen-channel integrated photonic device to stabilize temporal and cross-channel power deviations and enable precise and uniform control. Applying this device to a homogeneous constellation of silicon-vacancy artificial atoms in diamond, we present techniques to spatially and spectrally address a dynamically-selectable set of these stochastically-positioned point emitters. We anticipate that this scalable and reconfigurable optical architecture will lead to systems that could enable parallel individual programmability of large many-body atomic systems, which is a critical step towards universal quantum computation on such hardware.

quant-ph↗

arXiv2022

Single-Shot Optical Neural Network

As deep neural networks (DNNs) grow to solve increasingly complex problems, they are becoming limited by the latency and power consumption of existing digital processors. For improved speed and energy efficiency, specialized analog optical and electronic hardware has been proposed, however, with limited scalability (input vector length $K$ of hundreds of elements). Here, we present a scalable, single-shot-per-layer analog optical processor that uses free-space optics to reconfigurably distribute an input vector and integrated optoelectronics for static, updatable weighting and the nonlinearity -- with $K \approx 1,000$ and beyond. We experimentally test classification accuracy of the MNIST handwritten digit dataset, achieving 94.7% (ground truth 96.3%) without data preprocessing or retraining on the hardware. We also determine the fundamental upper bound on throughput ($\sim$0.9 exaMAC/s), set by the maximum optical bandwidth before significant increase in error. Our combination of wide spectral and spatial bandwidths in a CMOS-compatible system enables highly efficient computing for next-generation DNNs.

cs.ET↗

arXiv2020

Fundamental thermal noise limits for optical microcavities

We present a joint theoretical and experimental characterization of thermo-refractive noise in high quality factor ($Q$), small mode volume ($V$) optical microcavities. Analogous to well-studied stability limits imposed by Brownian motion in macroscopic Fabry-Perot resonators, microcavity thermo-refractive noise gives rise to a mode volume-dependent maximum effective quality factor. State-of-the-art fabricated microcavities are found to be within one order of magnitude of this bound. We confirm the assumptions of our theory by measuring the noise spectrum of high-$Q/V$ silicon photonic crystal cavities and apply our results to estimate the optimal performance of proposed room temperature, all-optical qubits using cavity-enhanced bulk material nonlinearities.

physics.optics↗

arXiv2019

Single Photon Detection by Cavity-Assisted All-Optical Gain

We consider the free carrier dispersion effect in a semiconductor nanocavity in the limit of discrete photoexcited electron-hole pairs. This analysis reveals the possibility of ultrafast, incoherent transduction and gain from a single photon signal to a strong coherent probe field. Homodyne detection of the displaced probe field enables a new method for room temperature, photon-number-resolving single photon detection. In particular, we estimate that a single photon absorbed within a silicon nanocavity can, within tens of picoseconds, be detected with $\sim 99\%$ efficiency and a dark count rate on the order of kHz assuming a mode volume $V_\text{eff}\sim 10^{-2}(λ/n_\text{Si})^3$ for a 4.5 micron probe wavelength and a loaded quality factor $Q$ on the order of $10^4$.

physics.optics↗