arXiv subjects

Christos Liaskos

Publications and source records attributed to Christos Liaskos.

At least 37 records · Page 2Linked to original sources

arXiv2020

Impact of Graphene Thickness on EM Modelling of Antenna

This paper presents illustrative electromagnetic modelling and simulation of graphene antenna using a two-dimensional graphene sheet of zero thickness and a three-dimensional graphene slab of finite thickness. The properties of the antenna are analyzed in terms of the S11 parameter, input impedance, VSWR, radiation pattern, and frequency reconfiguration using the full-wave electromagnetic simulator. Furthermore, this work numerically studies the modelling of graphene antenna using a three-dimensional graphene thin slab and the impact of graphene slab thickness on the performance of graphene antenna.

physics.app-ph↗

arXiv2020

Mobility-aware Beam Steering in Metasurface-based Programmable Wireless Environments

Programmable wireless environments (PWEs) utilize electromagnetic metasurfaces to transform wireless propagation into a software-controlled resource. In this work we study the effects of user device mobility on the efficiency of PWEs. An analytical model is proposed, which describes the potential misalignment between user-emitted waves and the active PWE configuration, and can constitute the basis for studying queuing problems in PWEs. Subsequently, a novel, beam steering approach is proposed which can effectively mitigate the misalignment effects. Ray-tracing-based simulations evaluate the proposed scheme.

cs.ET↗

arXiv2020

Exploration of Intercell Wireless Millimeter-Wave Communication in the Landscape of Intelligent Metasurfaces

Software-defined metasurfaces are electromagnetically ultra-thin, artificial components that can provide engineered and externally controllable functionalities. The control over these functionalities is enabled by the metasurface tunability, which is implemented by embedded electronic circuits that modify locally the surface resistance and reactance. Integrating controllers within the metasurface cells, able to intercommunicate and adaptively reconfigure it, thus imparting a desired electromagnetic operation, opens the path towards the creation of an artificially intelligent (AI) fabric where each unit cell can have its own sensing, programmable computing, and actuation facilities. In this work we take a crucial step towards bringing the AI metasurface technology to emerging applications, in particular exploring the wireless mm-wave intercell communication capabilities in a software-defined HyperSurface designed for operation is the microwave regime. We examine three different wireless communication channels within the landscape of the reflective metasurface: Firstly, in the layer where the control electronics of the HyperSurface lie, secondly inside a dedicated layer enclosed between two metallic plates, and, thirdly, inside the metasurface itself. For each case we examine the physical implementation of the mm-wave transponder nodes, we quantify communication channel metrics, and we identify complexity vs. performance trade-offs.

physics.app-ph↗

arXiv2019

Wideband Perfect Absorption Polarization Insensitive Reconfigurable Graphene Metasurface for THz Wireless Environment

In this work, we investigated a simple structured graphene terahertz (THz) metasurface (MSF) with perfect absorption, wideband, polarization insensitive, oblique incidence insensitive and frequency reconfiguration. The graphene MSF structure is composed of a two-dimensional periodic array of graphene meta-atoms deposited on the silicon substrate terminated by a metal ground plane. The performance of the proposed MSF is numerically analyzed. An equivalent circuit model of the structure and its closed-form solution is introduced. The graphene MSF thin structure at 2.5 THz provides 100% of absorption with wide bandwidth, zero reflection and zero transmission at normal incidence in both transverse electric (TE) and transverse magnetic (TM) polarization. Under oblique incidence, the absorption is maintained at higher than 95%. Moreover, the graphene MSF structure has the advantage of frequency reconfiguration. The excellent absorption performance is maintained at all reconfigurable frequencies upon reconfiguration. The results reveal the effectiveness of the THz MSF with graphene meta-atoms, which can be promising for THz wireless environment.

eess.SP↗

arXiv2019

The Software-Defined Metasurfaces Concept and Electromagnetic Aspects

We present the concept and electromagnetic aspects of HyperSurFaces (HSFs), artificial, ultrathin structures with software controlled electromagnetic properties. The HSFs key unit is the metasurface, a plane with designed subwavelength features whose electromagnetic response can be tuned via voltage-controlled continuously-tunable electrical elements that provide local control of the surface impedance and advanced functionalities, such as tunable perfect absorption or wavefront manipulation. A nanonetwork of controllers enables software defined HSFs control related to the emerging Internet of Things paradigm.

physics.app-ph↗

arXiv2019

3D Channel Modeling and Characterization for Hypersurface Empowered Indoor Environment at 60 GHz Millimeter-Wave Band

This paper proposes a three-dimensional (3D) communication channel model for an indoor environment considering the effect of the Hypersurface. The Hypersurface is a software controlled intelligent metasurface, which can be used to manipulate electromagnetic waves, as for example for non-specular reflection and full absorption. Thus it can control the impinging rays from a transmitter towards a receiver location in both LOS and NLOS paths, e.g. to combat distance and improve wireless connectivity. We focus on the 60 GHz mmWave frequency band due to its increasing significance in 5G/6G networks and evaluate the effect of Hypersurface in an indoor environment in terms of attenuation coefficients related to the Hypersurface reflection and absorption functionalities, using CST simulation, a 3D electromagnetic simulator of high frequency components. To highlight the benefits of Hypersurface coated walls versus plain walls, we use the derived Hypersurface 3D channel model and a custom 3D ray-tracing simulator for plain walls considering a typical indoor scenario for different Tx-Rx location and separation distances.

eess.SP↗

arXiv2019

An Interpretable Neural Network for Configuring Programmable Wireless Environments

Software-defined metasurfaces (SDMs) comprise a dense topology of basic elements called meta-atoms, exerting the highest degree of control over surface currents among intelligent panel technologies. As such, they can transform impinging electromagnetic (EM) waves in complex ways, modifying their direction, power, frequency spectrum, polarity and phase. A well-defined software interface allows for applying such functionalities to waves and inter-networking SDMs, while abstracting the underlying physics. A network of SDMs deployed over objects within an area, such as a floorplan walls, creates programmable wireless environments (PWEs) with fully customizable propagation of waves within them. This work studies the use of machine learning for configuring such environments to the benefit of users within. The methodology consists of modeling wireless propagation as a custom, interpretable, back-propagating neural network, with SDM elements as nodes and their cross-interactions as links. Following a training period the network learns the propagation basics of SDMs and configures them to facilitate the communication of users within their vicinity.

cs.ET↗

arXiv2019

Joint Compressed Sensing and Manipulation of Wireless Emissions with Intelligent Surfaces

Programmable, intelligent surfaces can manipulate electromagnetic waves impinging upon them, producing arbitrarily shaped reflection, refraction and diffraction, to the benefit of wireless users. Moreover, in their recent form of HyperSurfaces, they have acquired inter-networking capabilities, enabling the Internet of Material Properties with immense potential in wireless communications. However, as with any system with inputs and outputs, accurate sensing of the impinging wave attributes is imperative for programming HyperSurfaces to obtain a required response. Related solutions include field nano-sensors embedded within HyperSurfaces to perform minute measurements over the area of the HyperSurface, as well as external sensing systems. The present work proposes a sensing system that can operate without such additional hardware. The novel scheme programs the HyperSurface to perform compressed sensing of the impinging wave via simple one-antenna power measurements. The HyperSurface can jointly be programmed for both wave sensing and wave manipulation duties at the same time. Evaluation via simulations validates the concept and highlight its promising potential.

cs.ET↗

arXiv2019

Organizing Network Management Logic with Circular Economy Principles

The traditional cycle of industrial products has been linear since its inception. Raw resources are acquired, processed, distributed, used and ultimately disposed of. This linearity has led to a dangerously low efficiency degree in resource use, and has brought forth serious concerns for the viability of our natural ecosystem. Circular economy is introducing a circular workflow for the lifetime of products. It generalizes the disposal phase, reconnecting it to manufacturing, distribution and end-use, thus limiting true deposition to the environment. This process has not been extended so far to software. Nonetheless, the development of software follows the same phases, and also entails the use-and waste-of considerable resources. This include human effort, as well as human and infrastructure sustenance products such as food, traveling and energy. This paper introduces circular economy principles to the software development, and particularly to network management logic and security. It employs a recently proposed concept-the Socket Store-which is an online store distributing end-user network logic in modular form. The Store modules act as mediators between the end-user network logic and the network resources. It is shown that the Socket Store can implement all circular economy principles to the software life-cycle, with considerable gains in resource waste.

cs.NI↗

arXiv2019

Software-Defined Metasurface Paradigm: Concept, Challenges, Prospects

HyperSurfaces (HSFs) are devices whose electromagnetic (EM) behavior is software-driven, i.e., it can be defined programmatically. The key components of this emerging technology are the metasurfaces, artificial layered materials whose EM properties depend on their internal subwavelength structuring. HSFs merge metasurfaces with a network of miniaturized custom electronic controllers, the nanonetwork, in an integrated scalable hardware platform. The nanonetwork receives external programmatic commands expressing the desired end-functionality and appropriately alters the metasurface configuration thus yielding the respective EM behavior for the HSF. In this work, we will present all the components of the HSF paradigm, as well as highlight the underlying challenges and future prospects.

physics.app-ph↗

arXiv2018

Modeling, Simulating and Configuring Programmable Wireless Environments for Multi-User Multi-Objective Networking

Programmable wireless environments enable the software-defined propagation of waves within them, yielding exceptional performance potential. Several building-block technologies have been implemented and evaluated at the physical layer. The present work contributes a network-layer scheme to configure such environments for multiple users and objectives, and for any physical-layer technology. Supported objectives include any combination of Quality of Service and power transfer optimization, eavesdropping and Doppler effect mitigation, in multi-cast or uni-cast settings. Additionally, a graph-based model of programmable environments is proposed, which incorporates core physical observations and efficiently separates physical and networking concerns. Evaluation takes place in a specially developed, free simulation tool, and in a variety of environments. Performance gains over regular propagation are highlighted, reaching important insights on the user capacity of programmable environments.

cs.NI↗

arXiv2018

A Novel Communication Paradigm for High Capacity and Security via Programmable Indoor Wireless Environments in Next Generation Wireless Systems

Wireless communication environments comprise passive objects that cause performance degradation and eavesdropping concerns due to anomalous scattering. This paper proposes a new paradigm, where scattering becomes software-defined and, subsequently, optimizable across wide frequency ranges. Through the proposed programmable wireless environments, the path loss, multi-path fading and interference effects can be controlled and mitigated. Moreover, the eavesdropping can be prevented via novel physical layer security capabilities. The core technology of this new paradigm is the concept of metasurfaces, which are planar intelligent structures whose effects on impinging electromagnetic waves are fully defined by their micro-structure. Their control over impinging waves has been demonstrated to span from 1 GHz to 10 THz. This paper contributes the software-programmable wireless environment, consisting of several HyperSurface tiles (programmable metasurfaces) controlled by a central server. HyperSurfaces are a novel class of metasurfaces whose structure and, hence, electromagnetic behavior can be altered and controlled via a software interface. Multiple networked tiles coat indoor objects, allowing fine-grained, customizable reflection, absorption or polarization overall. A central server calculates and deploys the optimal electromagnetic interaction per tile, to the benefit of communicating devices. Realistic simulations using full 3D ray-tracing demonstrate the groundbreaking performance and security potential of the proposed approach in 2.4 GHz and 60 GHz frequencies.

cs.NI↗

arXiv2018

Fault Adaptive Routing in Metasurface Controller Networks

HyperSurfaces are a merge of structurally reconfigurable metasurfaces whose electromagnetic properties can be changed via a software interface, using an embedded miniaturized network of controllers, thus enabling novel capabilities in wireless communications. Resource constraints associated with the development of a hardware testbed of this breakthrough technology necessitate network controller architectures different from traditional regular Network-on-Chip architectures. The Manhattan-like topology chosen to realize the controller network in the testbed under development is irregular, with restricted local path selection options, operating in an asynchronous fashion. These characteristics render traditional fault-tolerant routing mechanisms inadequate. In this paper, we present work in progress towards the development of fault-tolerant routing mechanisms for the chosen architecture. We present two XY-based approaches which have been developed aiming to offer reliable data delivery in the presence of faults. The first approach aims to avoid loops while the second one attempts to maximize the success delivery probabilities. Their effectiveness is demonstrated via simulations conducted on a custom developed simulator.

cs.ET↗

arXiv2018

Improving Networked Music Performance Systems Using Application-Network Collaboration

Networked Music Performance (NMP) systems involve musicians located in different places who perform music while staying synchronized via the Internet. The maximum end-to-end delay in NMP applications is called Ensemble Performance Threshold (EPT) and should be less than 25 milliseconds. Due to this constraint, NMPs require ultra-low delay solutions for audio coding, network transmission, relaying and decoding, each one a challenging task on its own. There are two directions for study in the related work referring to the NMP systems. From the audio perspective, researchers experiment on low-delay encoders and transmission patterns, aiming to reduce the processing delay of the audio transmission, but they ignore the network performance. On the other hand, network-oriented researchers try to reduce the network delay, which contributes to reduced end-to-end delay. In our proposed approach, we introduce an integration of dynamic audio and network configuration to satisfy the EPT constraint. The basic idea is that the major components participating in an NMP system the application and the network interact during the live music performance. As the network delay increases, the network tries to equalize it by modifying the routing behavior using Software Defined Networking principles. If the network delay exceeds a maximum affordable threshold, the network reacts by informing the application to change the audio processing pattern to overcome the delay increase, resulting in below EPT end-to-end delay. A full prototype of the proposed system was implemented and extensively evaluated in an emulated environment.

eess.SY↗

arXiv2018

Enabling Ultra-Low Delay Teleorchestras using Software Defined Networking

Ultra-low delay sensitive applications can afford delay only at the level of msec. An example of this application class are the Networked Music Performance (NMP) systems that describe a live music performance by geographically separate musicians over the Internet. The present work proposes a novel architecture for NMP systems, where the key-innovation is the close collaboration between the network and the application. Using SDN principles, the applications are enabled to adapt their internal audio signal processing, in order to cope with network delay increase. Thus, affordable end-to-end delay is provided to NMP users, even under considerable network congestion.

cs.NI↗

arXiv2018

Application-Network Collaboration Using SDN for Ultra-Low Delay Teleorchestras

Networked Music Performance (NMP) constitutes a class of ultra-low delay sensitive applications, allowing geographically separate musicians to perform seamlessly as a tele-orchestra. For this application type, the QoS indicator is the mouth-to-ear delay, which should be kept under 25 milliseconds. The mouth-to-ear delay comprises signal processing latency and network delay. We propose a strong collaboration between the network and NMP applications to \emph{actively} keep the to mouth-to-ear delay minimal, using direct state notifications. Related approaches can be characterized as \emph{passive}, since they try to estimate the network state indirectly, based on the end application performance. Our solution employs Software Defined Networking (SDN) to implement the network-to-application collaboration, being facilitated by the well-defined network interface that SDN offers. Emulation results show that the proposed scheme achieves an improvement of up to 59% in mouth-to-ear delay over the existing passive solutions.

eess.SY↗

arXiv2018

BitSurfing: Wireless Communications with Outsourced Symbol Generation

Nano-IoT enables a wide range of ground-breaking technologies, but face implementation challenges due to the extremity of the scale. Space restrictions pose severe power supply considerations, to the point where just a few packet transmissions are sufficient to deplete state-of-the-art supplies. In turn, this translates to difficulties in developing efficient protocols even for basic operations, such as addressing and routing. The present work proposes a new network adapter architecture that can address these challenges. The BitSurfing adapter does not generate packets and, hence, abolishes the need for the corresponding transmission circuitry and power consumption. Instead, it relies on an external symbol generator. The BitSurfing adapter reads incoming symbols, waiting for intended messages to appear in the symbol stream. A short (1-bit), low-energy pulse is then emitted to notify neighboring nodes. BitSurfing adapters are shown to exhibit perpetual (and even battery-less) operation, ability to operate without medium access control, while being completely transparent to applications. Moreover, their operation is event-driven, allowing for clock-less implementations. The new adapters are evaluated in a simulated multi-hop nano-IoT network and are shown to offer nearly-perfect packet delivery rates and practically no collisions, under any congestion level.

cs.NI↗

arXiv2018

Towards a Circular Economy via Intelligent Metamaterials

The present study proposes the use of intelligent metasurfaces in the design of products, as enforcers of circular economy principles. Intelligent metasurfaces can tune their physical properties (electromagnetic, acoustic, mechanical) by receiving software commands. When incorporated within products and spaces they can mitigate the resource waste caused by inefficient, partially optimized designs and security concerns. Thus, circular economy and fast-paced product design become compatible. The study begins by considering electromagnetic metamaterials, and proposes a complete methodology for their deployment. Finally, it is shown that the same principles can be extended to the control of mechanical properties of objects, exemplary enabling the micro-management of vibrations and heat, with unprecedented circular economy potential.

cs.OH↗