arXiv subjects

Chuan Huang

Publications and source records attributed to Chuan Huang.

At least 19 recordsLinked to original sources

arXiv2026

Adaptive Source-Channel Coding for Bi-static Integrated Sensing and Semantic Communications

Semantic communication (SemCom) has emerged as a new paradigm to facilitate the performance of integrated sensing and communication systems in 6G, due to its potential to enhance transmission efficiency by transmitting task-relevant semantic features rather than raw bits. However, most of the existing works mainly focus on sensing data compression to reduce the subsequent communication overheads, without considering the integrated transmission framework for both the SemCom and sensing tasks. This paper proposes a sensing-aware adaptive source-channel coding (SA-ASCC) and beamforming design framework for bi-static integrated sensing and SemCom (ISSC) systems by jointly optimizing the coding rate for SemCom task and the transmit beamforming for both the SemCom and sensing tasks. Specifically, an end-to-end semantic distortion function is approximated by deriving an upper bound composing of source and channel coding induced components, and then a hybrid Cram\'{e}r-Rao bound (HCRB) is derived for target position under imperfect time synchronization due to the transceiver deployed at different places in our considered bi-static ISSC system. To characterize the achievable region between SemCom and sensing performance, a distortion minimization problem is formulated by considering the HCRB threshold, channel uses, and power budget, which is non-convex due to the coupled design variables and the mixed-integer program. Subsequently, an alternating optimization (AO) algorithm is proposed to decompose this problem into the model selection and joint rate and beamforming optimization subproblems, which are solved by the exhaustive search method and the combination of successive convex approximation and fractional programming, respectively. Finally, simulation results demonstrate that the proposed scheme outperforms the DJSCC-WF-ZF and BPG-WF-ZF benchmarks.

eess.SP↗

arXiv2026

AerialMetric: Benchmarking and Adapting UAV Monocular Metric Depth Estimation in the Real World

This paper addresses the problem of monocular metric depth estimation in aerial UAV imagery. Although recent data-driven methods have achieved remarkable progress in ground-level scenarios, models trained primarily on street-view and indoor datasets exhibit significant domain gaps when applied to aerial viewpoints. To tackle these challenges, we introduce AerialMetric, a benchmark dataset designed to evaluate and facilitate the adaptation of monocular metric depth estimation under UAV aerial viewpoints. The dataset consists of four complementary subsets collected from different sources, jointly covering real-world photogrammetry data, controlled aerial acquisition settings, photorealistic synthetic scenes, and in-the-wild Internet imagery. Totally, AerialMetric provides 52K real-world and 16K synthetic image-depth pairs with reliable metric ground truth. Based on this dataset, we conduct systematic evaluations of existing state-of-the-art models under aerial settings and investigate the impact of viewpoint, altitude, and camera parameters on metric depth prediction. In addition, by fine-tuning representative metric depth model on our dataset, we establish a comprehensive aerial benchmark and achieve state-of-the-art performance across diverse aerial imagery. Our dataset, code, and model weight are publicly available at https://kuieless.github.io/AerialMetric-ECCV2026-page/.

cs.CV↗

arXiv2026

Building Low-Altitude Communication Networks: A Digital Twin-Based Optimization Framework

Low-altitude communication networks (LACNs) serve as the critical infrastructure of the emerging low-altitude economy (LAE), supporting services such as drone delivery and infrastructure inspection. However, LACNs operate in highly dynamic three-dimensional (3D) environments characterized by high mobility and predominantly line-of-sight (LoS) propagation, creating strong coupling among key performance objectives including coverage, interference mitigation, handover management, and sensing capability. Isolated tuning of individual objectives cannot capture these cross-objective interactions, rendering conventional approaches based on experience-driven tuning and repeated field trials inefficient and costly. To address these challenges, we propose DT-MOO, a Digital Twin-based Multi-Objective Optimization framework for LACNs. By constructing a high-fidelity virtual replica that integrates realistic environmental models, electromagnetic (EM) propagation, and traffic dynamics within a unified environment, DT-MOO enables joint evaluation and systematic optimization of interdependent network parameters, scoring candidate configurations by their combined effect on multiple objectives. As the foundational validation of the framework, we report real-world experiments in a 5G-enabled LACN focusing on coverage-interference co-optimization, where DT-MOO increases the high-quality coverage rate from 14.0% to 52.9% across all evaluated altitudes compared to an operator-provisioned, experience-based baseline, while achieving a net SINR gain under stringent criteria despite local spatial trade-offs, confirming its ability to handle coupled objectives in practical LACN deployment.

eess.SP↗

arXiv2026

Integrated Sensing and Semantic Communication with Adaptive Source-Channel Coding

Semantic communication has emerged as a new paradigm to facilitate the performance of integrated sensing and communication systems in 6G. However, most of the existing works mainly focus on sensing data compression to reduce the subsequent communication overheads, without considering the integrated transmission framework for both the SemCom and sensing tasks. This paper proposes an adaptive source-channel coding and beamforming design framework for integrated sensing and SemCom systems by jointly optimizing the coding rate for SemCom task and the transmit beamforming for both the SemCom and sensing tasks. Specifically, an end-to-end semantic distortion function is approximated by deriving an upper bound composing of source and channel coding induced components, and then a hybrid Cram\'{e}r-Rao bound (HCRB) is also derived for target position under imperfect time synchronization. To facilitate the joint optimization, a distortion minimization problem is formulated by considering the HCRB threshold, channel uses, and power budget. Subsequently, an alternative optimization algorithm composed of successive convex approximation and fractional programming is proposed to address this problem by decoupling it into two subproblems for coding rate and beamforming designs, respectively. Simulation results demonstrate that our proposed scheme outperforms the conventional deep joint source-channel coding -water filling-zero forcing benchmark.

eess.SP↗

arXiv2025

MI-SLAM: Magnetic Inertial SLAM Systems

Spatially inhomogeneous magnetic fields offer a valuable, non-visual information source for positioning. Among systems leveraging this, magnetic field-based simultaneous localization and mapping (SLAM) systems are particularly attractive. These systems execute positioning and magnetic field mapping tasks simultaneously, and they have bounded positioning error within previously visited regions. However, state-of-the-art magnetic-field SLAM methods typically require low-drift odometry data provided by visual odometry, a wheel encoder, or pedestrian dead-reckoning technology, which may not be available under certain situations. To address this limitation, this work proposes two magnetic inertial SLAM (MI-SLAM) systems --- a loosely coupled version and a tightly coupled version --- that rely solely on low-cost sensors: an inertial measurement unit (IMU) and seven magnetometers. Both systems use a magnetic field aided inertial navigation system (MAINS) to obtain odometry. The key difference between the two systems is whether the navigation state estimation is done in one or two steps. These systems are evaluated in real-world indoor environments with multi-floor structures. The proposed MI-SLAM systems outperform the state-of-the-art magnetic-inertial odometry system, MAINS, achieving a positioning RMSE below 1 meter on a trajectory lasting approximately 200 seconds. A potential application of the proposed systems is for the positioning of emergency response officers in mine or fire rescue operations, where one cannot rely on a GNSS or visual-based localization system.

cs.RO↗

arXiv2025

RobustSplat++: Decoupling Densification, Dynamics, and Illumination for In-the-Wild 3DGS

3D Gaussian Splatting (3DGS) has gained significant attention for its real-time, photo-realistic rendering in novel-view synthesis and 3D modeling. However, existing methods struggle with accurately modeling in-the-wild scenes affected by transient objects and illuminations, leading to artifacts in the rendered images. We identify that the Gaussian densification process, while enhancing scene detail capture, unintentionally contributes to these artifacts by growing additional Gaussians that model transient disturbances and illumination variations. To address this, we propose RobustSplat++, a robust solution based on several critical designs. First, we introduce a delayed Gaussian growth strategy that prioritizes optimizing static scene structure before allowing Gaussian splitting/cloning, mitigating overfitting to transient objects in early optimization. Second, we design a scale-cascaded mask bootstrapping approach that first leverages lower-resolution feature similarity supervision for reliable initial transient mask estimation, taking advantage of its stronger semantic consistency and robustness to noise, and then progresses to high-resolution supervision to achieve more precise mask prediction. Third, we incorporate the delayed Gaussian growth strategy and mask bootstrapping with appearance modeling to handling in-the-wild scenes including transients and illuminations. Extensive experiments on multiple challenging datasets show that our method outperforms existing methods, clearly demonstrating the robustness and effectiveness of our method.

cs.CV↗

arXiv2025

CloseUpShot: Close-up Novel View Synthesis from Sparse-views via Point-conditioned Diffusion Model

Reconstructing 3D scenes and synthesizing novel views from sparse input views is a highly challenging task. Recent advances in video diffusion models have demonstrated strong temporal reasoning capabilities, making them a promising tool for enhancing reconstruction quality under sparse-view settings. However, existing approaches are primarily designed for modest viewpoint variations, which struggle in capturing fine-grained details in close-up scenarios since input information is severely limited. In this paper, we present a diffusion-based framework, called CloseUpShot, for close-up novel view synthesis from sparse inputs via point-conditioned video diffusion. Specifically, we observe that pixel-warping conditioning suffers from severe sparsity and background leakage in close-up settings. To address this, we propose hierarchical warping and occlusion-aware noise suppression, enhancing the quality and completeness of the conditioning images for the video diffusion model. Furthermore, we introduce global structure guidance, which leverages a dense fused point cloud to provide consistent geometric context to the diffusion process, to compensate for the lack of globally consistent 3D constraints in sparse conditioning inputs. Extensive experiments on multiple datasets demonstrate that our method outperforms existing approaches, especially in close-up novel view synthesis, clearly validating the effectiveness of our design.

cs.CV↗

arXiv2025

Towards Precise Channel Knowledge Map: Exploiting Environmental Information from 2D Visuals to 3D Point Clouds

The substantial communication resources consumed by conventional pilot-based channel sounding impose an unsustainable overhead, presenting a critical scalability challenge for the future 6G networks characterized by massive channel dimensions, ultra-wide bandwidth, and dense user deployments. As a generalization of radio map, channel knowledge map (CKM) offers a paradigm shift, enabling access to location-tagged channel information without exhaustive measurements. To fully utilize the power of CKM, this work highlights the necessity of leveraging three-dimensional (3D) environmental information, beyond conventional two-dimensional (2D) visual representations, to construct high-precision CKMs. Specifically, we present a novel framework that integrates 3D point clouds into CKM construction through a hybrid model- and data-driven approach, with extensive case studies in real-world scenarios. The experimental results demonstrate the potential for constructing precise CKMs based on 3D environments enhanced with semantic understanding, together with their applications in the next-generation wireless communications. We also release a real-world dataset of measured channel paired with high-resolution 3D environmental data to support future research and validation.

eess.SP↗

arXiv2025

Adaptive Source-Channel Coding for Multi-User Semantic and Data Communications

This paper considers a multi-user semantic and data communication (MU-SemDaCom) system, where a base station (BS) simultaneously serves users with different semantic and data tasks through a downlink multi-user multiple-input single-output (MU-MISO) channel. The coexistence of heterogeneous communication tasks, diverse channel conditions, and the requirements for digital compatibility poses significant challenges to the efficient design of MU-SemDaCom systems. To address these issues, we propose a multi-user adaptive source-channel coding (MU-ASCC) framework that adaptively optimizes deep neural network (DNN)-based source coding, digital channel coding, and superposition broadcasting. First, we employ a data-regression method to approximate the end-to-end (E2E) semantic and data distortions, for which no closed-form expressions exist. The obtained logistic formulas decompose the E2E distortion as the addition of the source and channel distortion terms, in which the logistic parameter variations are task-dependent and jointly determined by both the DNN and channel parameters. Then, based on the derived formulas, we formulate a weighted-sum E2E distortion minimization problem that jointly optimizes the source-channel coding rates, power allocation, and beamforming vectors for both the data and semantic users. Finally, an alternating optimization (AO) framework is developed, where the adaptive rate optimization is solved using the subgradient descent method, while the joint power and beamforming is addressed via the uplink-downlink duality (UDD) technique. Simulation results demonstrate that, compared with the conventional separate source-channel coding (SSCC) and deep joint source-channel coding (DJSCC) schemes that are designed for a single task, the proposed MU-ASCC scheme achieves simultaneous improvements in both the data recovery and semantic task performance.

eess.IV↗

arXiv2025

RadarPLM: Adapting Pre-trained Language Models for Marine Radar Target Detection by Selective Fine-tuning

Recent advances in pre-trained language models (PLMs) have demonstrated their capabilities in capturing universal knowledge, making them promising for radar signal processing applications. Nevertheless, directly fine-tuning PLMs on radar signals is both computationally expensive and prone to overfitting, particularly in low signal-to-clutter ratio (SCR) environments. To mitigate both issues, an effective fine-tuning framework for PLM-based marine radar target detection is proposed. First, we design a lightweight adaptation module, enabling computationally efficient fine-tuning while preserving the pre-trained model's general knowledge. Second, an effective selective fine-tuning strategy is developed to selectively optimize different feature patches based on their online-evaluated learning values, guiding the model to concentrate on those generalizable feature patterns and significantly reducing model overfitting to nosiy, anomalous, or overly simple patterns during optimization. Finally, a binary classification head is retrained based on autoencoder network to further enhance detection performance. Evaluations on real-world radar datasets highlight that the proposed RadarPLM framework considerably outperforms existing models, achieving a minimum of 6.35% gain in average detection performance under challenging low SCR conditions when using sequence features. In particular, under small-sample training conditions, RadarPLM also achieves highly significant average performance gains over prior methods, demonstrating the effectiveness of integrating the PLM.

eess.SP↗

arXiv2025

Adaptive Source-Channel Coding for Semantic Communications

Semantic communications (SemComs) have emerged as a promising paradigm for joint data and task-oriented transmissions, combining the demands for both the bit-accurate delivery and end-to-end (E2E) distortion minimization. However, current joint source-channel coding (JSCC) in SemComs is not compatible with the existing communication systems and cannot adapt to the variations of the sources or the channels, while separate source-channel coding (SSCC) is suboptimal in the finite blocklength regime. To address these issues, we propose an adaptive source-channel coding (ASCC) scheme for SemComs over parallel Gaussian channels, where the deep neural network (DNN)-based semantic source coding and conventional digital channel coding are separately deployed and adaptively designed. To enable efficient adaptation between the source and channel coding, we first approximate the E2E data and semantic distortions as functions of source coding rate and bit error ratio (BER) via logistic regression, where BER is further modeled as functions of signal-to-noise ratio (SNR) and channel coding rate. Then, we formulate the weighted sum E2E distortion minimization problem for joint source-channel coding rate and power allocation over parallel channels, which is solved by the successive convex approximation. Finally, simulation results demonstrate that the proposed ASCC scheme outperforms typical deep JSCC and SSCC schemes for both the single- and parallel-channel scenarios while maintaining full compatibility with practical digital systems.

cs.IT↗

arXiv2025

Point Cloud Environment-Based Channel Knowledge Map Construction

Channel knowledge map (CKM) provides certain levels of channel state information (CSI) for an area of interest, serving as a critical enabler for environment-aware communications by reducing the overhead of frequent CSI acquisition. However, existing CKM construction schemes adopt over-simplified environment information, which significantly compromises their accuracy. To address this issue, this work proposes a joint model- and data-driven approach to construct CKM by leveraging point cloud environmental data along with a few samples of location-tagged channel information. First, we propose a novel point selector to identify subsets of point cloud that contain environmental information relevant to multipath channel gains, by constructing a set of co-focal ellipsoids based on different time of arrival (ToAs). Then, we trained a neural channel gain estimator to learn the mapping between each selected subset and its corresponding channel gain, using a real-world dataset we collected through field measurements, comprising environmental point clouds and corresponding channel data. Finally, experimental results demonstrate that: For CKM construction of power delay profile (PDP), the proposed method achieves a root mean squared error (RMSE) of 2.95 dB, significantly lower than the 7.32 dB achieved by the conventional ray-tracing method; for CKM construction of received power values, i.e., radio map, it achieves an RMSE of 1.04 dB, surpassing the Kriging interpolation method with an RMSE of 1.68 dB.

eess.SP↗

arXiv2025

RobustSplat: Decoupling Densification and Dynamics for Transient-Free 3DGS

3D Gaussian Splatting (3DGS) has gained significant attention for its real-time, photo-realistic rendering in novel-view synthesis and 3D modeling. However, existing methods struggle with accurately modeling scenes affected by transient objects, leading to artifacts in the rendered images. We identify that the Gaussian densification process, while enhancing scene detail capture, unintentionally contributes to these artifacts by growing additional Gaussians that model transient disturbances. To address this, we propose RobustSplat, a robust solution based on two critical designs. First, we introduce a delayed Gaussian growth strategy that prioritizes optimizing static scene structure before allowing Gaussian splitting/cloning, mitigating overfitting to transient objects in early optimization. Second, we design a scale-cascaded mask bootstrapping approach that first leverages lower-resolution feature similarity supervision for reliable initial transient mask estimation, taking advantage of its stronger semantic consistency and robustness to noise, and then progresses to high-resolution supervision to achieve more precise mask prediction. Extensive experiments on multiple challenging datasets show that our method outperforms existing methods, clearly demonstrating the robustness and effectiveness of our method. Our project page is https://fcyycf.github.io/RobustSplat/.

cs.CV↗

arXiv2025

Joint Magnetometer-IMU Calibration via Maximum A Posteriori Estimation

This paper presents a new method for jointly calibrating a magnetometer and inertial measurement unit (IMU), focusing on balancing calibration accuracy and computational efficiency. The proposed method is based on a maximum a posteriori estimation framework, treating both the calibration parameters and orientation trajectory of the sensors as unknowns. This method enables efficient optimization of the calibration parameters using analytically derived derivatives. The performance of the proposed method is compared against that of two state-of-the-art methods. Simulation results demonstrate that the proposed method achieves the lowest root mean square error in calibration parameters, increasing the calibration accuracy by 20-30%, while maintaining competitive computational efficiency. Further validation through real-world experiments confirms the practical benefits of the proposed method. The proposed method calibrated 30 magnetometer-IMU pairs in under two minutes on a consumer-grade laptop, which is one order of magnitude faster than the most accurate state-of-the-art algorithm as implemented in this work. Moreover, when calibrated using the proposed method, a magnetic-field-aided inertial navigation system achieved positioning performance comparable to when it is calibrated with the state-of-the-art method. These results demonstrate that the proposed method is a reliable and effective choice for jointly calibrating magnetometer-IMU pairs.

cs.RO↗

arXiv2025

Task Scheduling in Space-Air-Ground Uniformly Integrated Networks with Ripple Effects

Space-air-ground uniformly integrated network (SAGUIN), which integrates the satellite, aerial, and terrestrial networks into a unified communication architecture, is a promising candidate technology for the next-generation wireless systems. Transmitting on the same frequency band, higher-layer access points (AP), e.g., satellites, provide extensive coverage; meanwhile, it may introduce significant signal propagation delays due to the relatively long distances to the ground users, which can be multiple times longer than the packet durations in task-oriented communications. This phenomena is modeled as a new ``ripple effect'', which introduces spatiotemporally correlated interferences in SAGUIN. This paper studies the task scheduling problem in SAGUIN with ripple effect, and formulates it as a Markov decision process (MDP) to jointly minimize the age of information (AoI) at users and energy consumption at APs. The obtained MDP is challenging due to high dimensionality, partial observations, and dynamic resource constraints caused by ripple effect. To address the challenges of high dimensionality, we reformulate the original problem as a Markov game, where the complexities are managed through interactive decision-making among APs. Meanwhile, to tackle partial observations and the dynamic resource constraints, we adopt a modified multi-agent proximal policy optimization (MAPPO) algorithm, where the actor network filters out irrelevant input states based on AP coverage and its dimensionality can be reduced by more than an order of magnitude. Simulation results reveal that the proposed approach outperforms the benchmarks, significantly reducing users' AoI and APs' energy consumption.

cs.NI↗

arXiv2025

Mixture-of-Experts for Distributed Edge Computing with Channel-Aware Gating Function

In a distributed mixture-of-experts (MoE) system, a server collaborates with multiple specialized expert clients to perform inference. The server extracts features from input data and dynamically selects experts based on their areas of specialization to produce the final output. Although MoE models are widely valued for their flexibility and performance benefits, adapting distributed MoEs to operate effectively in wireless networks has remained unexplored. In this work, we introduce a novel channel-aware gating function for wireless distributed MoE, which incorporates channel conditions into the MoE gating mechanism. To train the channel-aware gating, we simulate various signal-to-noise ratios (SNRs) for each expert's communication channel and add noise to the features distributed to the experts based on these SNRs. The gating function then utilizes both features and SNRs to optimize expert selection. Unlike conventional MoE models which solely consider the alignment of features with the specializations of experts, our approach additionally considers the impact of channel conditions on expert performance. Experimental results demonstrate that the proposed channel-aware gating scheme outperforms traditional MoE models.

cs.LG↗

arXiv2025

On the Connection Between Magnetic-Field Odometry Aided Inertial Navigation and Magnetic-Field SLAM

Magnetic-field simultaneous localization and mapping (SLAM) using consumer-grade inertial and magnetometer sensors offers a scalable, cost-effective solution for indoor localization. However, the rapid error accumulation in the inertial navigation process limits the feasible exploratory phases of these systems. Advances in magnetometer array processing have demonstrated that odometry information, i.e., displacement and rotation information, can be extracted from local magnetic field variations and used to create magnetic-field odometry-aided inertial navigation systems. The error growth rate of these systems is significantly lower than that of standalone inertial navigation systems. This study seeks an answer to whether a magnetic-field SLAM system fed with measurements from a magnetometer array can indirectly extract odometry information -- without requiring algorithmic modifications -- and thus sustain longer exploratory phases. The theoretical analysis and simulation results show that such a system can extract odometry information and indirectly create a magnetic field odometry-aided inertial navigation system during the exploration phases. However, practical challenges related to map resolution and computational complexity remain significant.

eess.SP↗

arXiv2025

A high-resolution microresonator-frequency-comb spectrometer

Spectral analysis is one of the most powerful technologies for studying and understanding matter. As the devices for spectral analysis, spectrometers are widely used in material detection, isotope analysis, trace gas detection, and the study of atomic and molecular hyperfine structures. While high resolution, wide bandwidth and fast speed are essential factors, they are always trade-offs for conventional spectrometers. Here, we present a soliton-microcomb-based spectrometer that overcomes these challenges by integrating dissipative Kerr solitons (DKSs) with double-sideband modulation and parallelized detection. Leveraging a high-quality silicon nitride microresonator, we generate a broadband, fully stabilized soliton microcomb and employ radio-frequency-modulated double sidebands to scan the optical spectrum with the resolution constrained only by the comb-line linewidth. By projecting the comb lines onto a two-dimensional charge-coupled device (CCD) via a virtually imaged phased array (VIPA)-grating system, we enable parallel processing of all spectral components, circumventing sequential scanning delays. The resulting spectrometer achieves 200-kHz resolution across a 4-THz bandwidth with minutes-level processing time while maintaining robustness against environmental fluctuations. Being promising for miniaturization, this work bridges the gap between laboratory-grade performance and field-deployable practicality, unlocking new possibilities for spectroscopy in astronomy, metrology, and integrated photonics.

physics.optics↗