arXiv subjects

Chuheng Wei

Publications and source records attributed to Chuheng Wei.

10 recordsLinked to original sources

arXiv2026

DriveMotion: A Large-Scale Multi-Source Benchmark for Driver Motion Sequence Modeling and Forecasting

Driver motion can provide cues to ongoing behavior, attention, and near-term driving intent. However, most existing driver-centric datasets focus on recognizing predefined driver behaviors from short video clips, while human motion forecasting benchmarks largely target motion outside the vehicle. We introduce DriveMotion, a multi-source benchmark for continuous driver motion forecasting. DriveMotion contains 393 hours of 133-keypoint motion sequences at 10 Hz from 360 drivers, integrating naturalistic driving data, curated public in-cabin videos, and the AIDE dataset into a unified representation with per-joint validity masks and synchronized driving context. Naturalistic driving contains long periods of limited body movement, making uniformly sampled evaluation dominated by persistence and less sensitive to brief but behaviorally meaningful motion. To address this, we use dynamics-anchored evaluation, placing forecasting windows around vehicle maneuvers identified offline from CAN signals without providing CAN to the model at inference. Arm motion in pre-maneuver windows is 3.4x greater than in route-matched stable-driving controls. On these anchored windows, learned models reduce forecasting error over persistence by up to 15%, while maneuver-enriched training improves forecast-derived Part-State F1 by 44% over the zero-motion reference. Training on the full multi-source corpus further reduces forecasting error on held-out web drivers by 38% compared with BATON-only training. DriveMotion provides identity-disjoint splits, fixed evaluation subsets, and reference implementations for reproducible evaluation of continuous driver motion forecasting. The dataset and benchmark are available at https://huggingface.co/datasets/HenryYHW/DriveMotion

cs.CV↗

arXiv2026

Designing Versatile Samples for Learned Trajectory Scoring

Many current end-to-end driving policies emit a pool of candidate trajectories and select one, which makes selection a separable component: a scorer can be retrained while the planner, its backbone, and its trajectory generator all stay frozen. However, many strong planners concentrate their proposals around safe mode, providing limited supervision near decision boundaries. In this work, we design a training dataset that provides more informative supervision for the scorer. In particular, we construct two generators that perturb the logged human trajectory along the two axes a vehicle can be displaced: laterally toward the drivable boundary and longitudinally toward a leading vehicle. The designed dataset produces more informative positive and negative samples than the base planner's proposal pool. We attach a transformer-based scorer to two frozen generative planners, DiffusionDrive and MeanFuser, and train it on the NAVSIM navtrain dataset. The results of the experiments show that we achieve 90.1 EPDMS on DiffusionDrive and 90.4 EPDMS on MeanFuser when using ResNet-34, with 0.4 and 0.3 EPDMS respectively, from the designed training dataset.

cs.RO↗

arXiv2026

VISTA-DZ: Visual Semantic Trajectory Adaptation for Personalized Dilemma Zone Prediction

Driver decision making in the dilemma zone at signalized intersections is safety critical, as vehicles approaching a yellow signal must decide whether to stop or proceed within limited time and distance margins. Accurate prediction of both stop-go decisions and decision timing is important for adaptive signal control, advanced driver assistance systems, and human-centered intelligent transportation applications. However, dilemma zone behavior is strongly driver dependent. Similar approach trajectories may lead to different decisions across drivers because of differences in risk preference, braking habit, and decision threshold. Existing personalized models often rely on handcrafted scalar descriptors, which provide useful but limited summaries of individual behavior. This paper proposes VISTA-DZ, a semantic-profile-conditioned framework for personalized stop-go and decision-time prediction. Historical trajectories are converted into visual representations, interpreted by a vision-language model to generate behavioral profiles, and encoded as semantic embeddings to condition a dual-output prediction network. The final model combines a bidirectional GRU encoder, driver-conditioned multi-head cross-attention, and Feature-wise Linear Modulation for temporal evidence selection and feature adaptation. Experiments on the SDZ dataset and a newly collected FDZ dataset show that VISTA-DZ outperforms trajectory-only and handcrafted personalization baselines, achieving 93.26% in-domain simulation accuracy and 90.22% mean accuracy across 20 held-out simulation drivers. Cross-domain results further show feasible zero-shot simulation-to-real transfer and better real-world generalization when simulation data are combined with limited field data.

cs.LG↗

arXiv2026

From Sensing to Decision: A Generic Architecture for Freight Signal Priority Systems

Freight Signal Priority (FSP) systems have emerged as a promising strategy to enhance freight mobility and reduce corridor delays in urban networks. While extensive research has focused on priority control algorithms and operational performance evaluation, comparatively limited attention has been devoted to the architectural design of sensing processes that shape reliable priority decisions. In practice, uncertainties in vehicle detection, communication, and estimated time of arrival (ETA) may propagate within the sensing-to-decision process, affecting priority timing and downstream signal performance. This paper presents a systematic review of FSP systems from a sensing-to-decision perspective. We propose a generic two-layer architecture consisting of a sensing-to-decision layer and a control execution layer. The sensing-to-decision layer transforms sensing inputs into priority decisions, while the control execution layer implements approved actions within traffic controllers. Within this architecture, we systematically compare major sensing modalities, including loop detectors, vision sensors, and V2I, across dimensions such as classification capability, state estimation accuracy, latency, and information richness. We further examine representative FSP systems to analyze how modality-specific characteristics and uncertainties influence ETA computation, priority triggering, and decision reliability. By linking sensing design to decision outcomes, this review identifies key deployment challenges and research gaps in reliability-aware sensing-to-decision design. Ultimately, this work provides a conceptual foundation for developing scalable and robust FSP systems that explicitly account for sensing imperfections rather than assuming idealized inputs.

eess.SY↗

arXiv2026

A Multi-modal Detection System for Infrastructure-based Freight Signal Priority

Freight vehicles approaching signalized intersections require reliable detection and motion estimation to support infrastructure-based Freight Signal Priority (FSP). Accurate and timely perception of vehicle type, position, and speed is essential for enabling effective priority control strategies. This paper presents the design, deployment, and evaluation of an infrastructure-based multi-modal freight vehicle detection system integrating LiDAR and camera sensors. A hybrid sensing architecture is adopted, consisting of an intersection-mounted subsystem and a midblock subsystem, connected via wireless communication for synchronized data transmission. The perception pipeline incorporates both clustering-based and deep learning-based detection methods with Kalman filter tracking to achieve stable real-time performance. LiDAR measurements are registered into geodetic reference frames to support lane-level localization and consistent vehicle tracking. Field evaluations demonstrate that the system can reliably monitor freight vehicle movements at high spatio-temporal resolution. The design and deployment provide practical insights for developing infrastructure-based sensing systems to support FSP applications.

cs.CV↗

arXiv2025

HeCoFuse: Cross-Modal Complementary V2X Cooperative Perception with Heterogeneous Sensors

Real-world Vehicle-to-Everything (V2X) cooperative perception systems often operate under heterogeneous sensor configurations due to cost constraints and deployment variability across vehicles and infrastructure. This heterogeneity poses significant challenges for feature fusion and perception reliability. To address these issues, we propose HeCoFuse, a unified framework designed for cooperative perception across mixed sensor setups where nodes may carry Cameras (C), LiDARs (L), or both. By introducing a hierarchical fusion mechanism that adaptively weights features through a combination of channel-wise and spatial attention, HeCoFuse can tackle critical challenges such as cross-modality feature misalignment and imbalanced representation quality. In addition, an adaptive spatial resolution adjustment module is employed to balance computational cost and fusion effectiveness. To enhance robustness across different configurations, we further implement a cooperative learning strategy that dynamically adjusts fusion type based on available modalities. Experiments on the real-world TUMTraf-V2X dataset demonstrate that HeCoFuse achieves 43.22% 3D mAP under the full sensor configuration (LC+LC), outperforming the CoopDet3D baseline by 1.17%, and reaches an even higher 43.38% 3D mAP in the L+LC scenario, while maintaining 3D mAP in the range of 21.74% to 43.38% across nine heterogeneous sensor configurations. These results, validated by our first-place finish in the CVPR 2025 DriveX challenge, establish HeCoFuse as the current state-of-the-art on TUM-Traf V2X dataset while demonstrating robust performance across diverse sensor deployments.

cs.CV↗

arXiv2025

Integrating Multi-Modal Sensors: A Review of Fusion Techniques for Intelligent Vehicles

Multi-sensor fusion plays a critical role in enhancing perception for autonomous driving, overcoming individual sensor limitations, and enabling comprehensive environmental understanding. This paper first formalizes multi-sensor fusion strategies into data-level, feature-level, and decision-level categories and then provides a systematic review of deep learning-based methods corresponding to each strategy. We present key multi-modal datasets and discuss their applicability in addressing real-world challenges, particularly in adverse weather conditions and complex urban environments. Additionally, we explore emerging trends, including the integration of Vision-Language Models (VLMs), Large Language Models (LLMs), and the role of sensor fusion in end-to-end autonomous driving, highlighting its potential to enhance system adaptability and robustness. Our work offers valuable insights into current methods and future directions for multi-sensor fusion in autonomous driving.

cs.CV↗

arXiv2025

PDB: Not All Drivers Are the Same -- A Personalized Dataset for Understanding Driving Behavior

Driving behavior is inherently personal, influenced by individual habits, decision-making styles, and physiological states. However, most existing datasets treat all drivers as homogeneous, overlooking driver-specific variability. To address this gap, we introduce the Personalized Driving Behavior (PDB) dataset, a multi-modal dataset designed to capture personalization in driving behavior under naturalistic driving conditions. Unlike conventional datasets, PDB minimizes external influences by maintaining consistent routes, vehicles, and lighting conditions across sessions. It includes sources from 128-line LiDAR, front-facing camera video, GNSS, 9-axis IMU, CAN bus data (throttle, brake, steering angle), and driver-specific signals such as facial video and heart rate. The dataset features 12 participants, approximately 270,000 LiDAR frames, 1.6 million images, and 6.6 TB of raw sensor data. The processed trajectory dataset consists of 1,669 segments, each spanning 10 seconds with a 0.2-second interval. By explicitly capturing drivers' behavior, PDB serves as a unique resource for human factor analysis, driver identification, and personalized mobility applications, contributing to the development of human-centric intelligent transportation systems.

cs.CV↗

arXiv2024

KI-GAN: Knowledge-Informed Generative Adversarial Networks for Enhanced Multi-Vehicle Trajectory Forecasting at Signalized Intersections

Reliable prediction of vehicle trajectories at signalized intersections is crucial to urban traffic management and autonomous driving systems. However, it presents unique challenges, due to the complex roadway layout at intersections, involvement of traffic signal controls, and interactions among different types of road users. To address these issues, we present in this paper a novel model called Knowledge-Informed Generative Adversarial Network (KI-GAN), which integrates both traffic signal information and multi-vehicle interactions to predict vehicle trajectories accurately. Additionally, we propose a specialized attention pooling method that accounts for vehicle orientation and proximity at intersections. Based on the SinD dataset, our KI-GAN model is able to achieve an Average Displacement Error (ADE) of 0.05 and a Final Displacement Error (FDE) of 0.12 for a 6-second observation and 6-second prediction cycle. When the prediction window is extended to 9 seconds, the ADE and FDE values are further reduced to 0.11 and 0.26, respectively. These results demonstrate the effectiveness of the proposed KI-GAN model in vehicle trajectory prediction under complex scenarios at signalized intersections, which represents a significant advancement in the target field.

cs.LG↗

arXiv2024

Feature Corrective Transfer Learning: End-to-End Solutions to Object Detection in Non-Ideal Visual Conditions

A significant challenge in the field of object detection lies in the system's performance under non-ideal imaging conditions, such as rain, fog, low illumination, or raw Bayer images that lack ISP processing. Our study introduces "Feature Corrective Transfer Learning", a novel approach that leverages transfer learning and a bespoke loss function to facilitate the end-to-end detection of objects in these challenging scenarios without the need to convert non-ideal images into their RGB counterparts. In our methodology, we initially train a comprehensive model on a pristine RGB image dataset. Subsequently, non-ideal images are processed by comparing their feature maps against those from the initial ideal RGB model. This comparison employs the Extended Area Novel Structural Discrepancy Loss (EANSDL), a novel loss function designed to quantify similarities and integrate them into the detection loss. This approach refines the model's ability to perform object detection across varying conditions through direct feature map correction, encapsulating the essence of Feature Corrective Transfer Learning. Experimental validation on variants of the KITTI dataset demonstrates a significant improvement in mean Average Precision (mAP), resulting in a 3.8-8.1% relative enhancement in detection under non-ideal conditions compared to the baseline model, and a less marginal performance difference within 1.3% of the mAP@[0.5:0.95] achieved under ideal conditions by the standard Faster RCNN algorithm.

cs.CV↗