arXiv subjects

Chukwudalu Okafor

Publications and source records attributed to Chukwudalu Okafor.

5 recordsLinked to original sources

arXiv2026

Influence of dislocation density on the tribological response in oxides: case study on SrTiO3

Most ceramics suffer from brittle surface damage and cracking when small particles slide across the surface under low load. Microscratching tests are a useful technique to mimic this loading scenario while retaining the material's deformation history; however, the impact of pre-seeded dislocations, which can significantly facilitate plastic deformation, has not been explored in ceramics. Here, the influence of mechanically seeded dislocations on the microscratching response of oxides is investigated using a model perovskite, SrTiO3. First, various dislocation densities over four orders of magnitude are introduced via room-temperature cyclic Brinell indenter scratching. Subsequently, load-ramped microscratching tests are performed within the pristine and dislocation-seeded regions using a nominally 30 μm spherical diamond tip. On the reference pristine surface, we observe a clear transition from elastic to elasto-plastic deformation, followed by median/radial cracking at higher loads. In contrast, pre-seeded dislocations, accompanied by residual compressive stresses, suppress elastic deformation and lead to median/radial crack shortening and subsequent transition to a partial cone crack. The subsurface cracks are characterized by 3D Nano-CT. The changes in crack geometry, with and without dislocations, were described using the Lawn-Evans-Marshall and Lawn-Wiederhorn-Roberts models. These findings provide direct evidence of dislocation-regulated near-surface damage tolerance, with general applicability to other plastically deformable oxides.

cond-mat.mtrl-sci↗

arXiv2026

Dislocation-point defect interaction on plasticity across the length scale in SrTiO3

Point defect engineering is widely used to tailor the electronic and transport properties of complex oxides, yet its influence on dislocation plasticity remains poorly understood. Here, we establish how donor (Nb) doping modifies dislocation nucleation, multiplication, and mobility in single-crystal SrTiO3 by bridging nano-, meso-, and macroscale deformation. Using a combinatorial approach involving nanoindentation, cyclic Brinell indentation, and bulk uniaxial compression, we show that 0.5 wt% Nb doping consistently suppresses room-temperature plasticity. Nanoindentation reveals increased pop-in stresses, increased lattice friction stress, and reduced creep rates, indicating inhibited dislocation nucleation and motion with Nb doping. Mesoscale Brinell indentation exhibits discrete, widely spaced slip traces reflecting more difficult dislocation multiplication. Bulk uniaxial compression confirms ~50% higher yield stress in Nb-doped (0.5 wt%) SrTiO3 samples. Comparison with Fe-doped SrTiO3 (equivalent doping concentration) isolates the role of defect chemistry: oxygen vacancies promote incipient plasticity, whereas Sr vacancies dominate in Nb-doped SrTiO3, strongly hindering dislocation motion. This length-scale bridging approach consistently reveals suppressed dislocation nucleation, multiplication, and motion in the 0.5 wt% Nb-doped samples. These insights underline the importance of dislocation-defect chemistry on the mechanical behavior of functional oxides.

cond-mat.mtrl-sci↗

arXiv2025

Room-temperature dislocation plasticity in ceramics: Methods, Materials, and Mechanisms

Dislocation-mediated plastic deformation in ceramic materials has sparked renewed research interest due to the technological potential of dislocations. Despite the long research history of dislocations as one-dimensional lattice defects in crystalline solids, the understanding of plastically deformable ceramics at room temperature seems lacking. The conventional view holds that ceramics are brittle, difficult to deform at room temperature and exhibit no dislocation plasticity except in small-scale testing such as nanoindentation and nano-micropillar compression. In this review, we attempt to gather the evidence and reports of room-temperature dislocation plasticity in ceramics beyond the nano-/microscale, with a focus on meso-macroscale plasticity. First, we present a mechanical deformation toolbox covering various experimental approaches for assessing the dislocation plasticity, with a focus on bulk plasticity. Second, we provide a materials toolbox listing 44 ceramic compounds that have been reported to exhibit dislocation plasticity at meso-/macroscale under ambient conditions. Finally, we discuss the mechanics of dislocations in ceramics, aiming to establish a foundation for predicting and discovering additional ceramics capable of room-temperature plastic deformation, thereby advancing the development of prospective dislocation-based technologies.

cond-mat.mtrl-sci↗

arXiv2025

Coupled electromigration-nanoindentation study on dislocation nucleation in SrTiO3

Modern functional oxides are mainly engineered by doping, essentially by tuning the defect chemistry. Recent studies suggest that dislocations offer a new perspective for enhancing the mechanical and physical properties of ceramic oxides. This raises the question regarding the interaction between dislocations and point defects in ceramics. Here, we report the impact of defect chemistry on the mechanical response of single-crystal strontium titanate, a prototype perovskite oxide. We demonstrate that electric field-induced stoichiometry polarization alters the defect chemistry, primarily by tuning oxygen vacancies, resulting in a distinct difference in the maximum shear stresses for dislocation nucleation, as experimentally observed and corroborated by molecular dynamic simulation. The impact of indenter tip size and geometry on the dislocation nucleation behavior in samples with different point defect concentrations in ceramics is further elucidated. Similar to the electromigration findings, acceptor-doped SrTiO3 tends to promote dislocation nucleation due to the abundance of oxygen vacancies. These findings shed new light on the interaction between dislocations and point defects in oxides. They may pave the road for assessing the stability of the next-generation functional ceramics engineered by dislocations.

cond-mat.mtrl-sci↗

arXiv2024

Room-temperature bulk plasticity and tunable dislocation densities in KTaO3

We report room-temperature bulk plasticity mediated by dislocations in single-crystal cubic KTaO3, contrasting the conventional knowledge that single-crystal KTaO3 is susceptible to brittle cleavage. A mechanics-based combinatorial experimental approach using cyclic Brinell indentation, scratching, and uniaxial bulk compression consistently demonstrates room-temperature dislocation plasticity in KTaO3 from the mesoscale to the macroscale. This approach also delivers tunable dislocation densities and plastic zone sizes. Scanning transmission electron microscopy analysis underpins the activated slip system to be <110>{1-10}. Given the growing significance of KTaO3 as an emerging electronic oxide and the increasing interest in dislocations for tuning physical properties of oxides, our findings are expected to trigger synergistic research interest in KTaO3 with dislocations.

cond-mat.mtrl-sci↗