arXiv subjects

Chun-Chieh Chang

Publications and source records attributed to Chun-Chieh Chang.

8 recordsLinked to original sources

arXiv2026

Germanium-tin (GeSn) avalanche photodiode with up to 2.7 micro cutoff wavelength for extended SWIR detection

Separate absorption charge multiplication germanium tin on silicon avalanche photodiode offers a viable solution to achieve CMOS compatible, high sensitivity detection technology in SWIR or extended SWIR range, leveraging the excellent k-factor of Si as multiplication layer and SWIR or e-SWIR band absorption of GeSn. However, unlike well-established growth of GeSn on Si with thick Ge buffer in-between to reduce threading dislocation density due to lattice mismatch, GeSn on Si APD design requires relatively thin Ge buffer to limit electric field drop through the background p-doped buffer and efficiently transporting photocarrier from GeSn absorber to Si multiplication layer, therefore making growth of high Sn content APD for e-SWIR coverage very challenging. In this work, we experimentally demonstrate GeSn on Si APD up to 12.7 percent Sn, monolithically grown on Si substrate with 122-nm-thick Ge buffer in between, which is considerably thinner than widely used 700-900 nm thick Ge buffer. Stronger relaxation of GeSn absorber via thin Ge buffer favors Sn incorporation, leading to higher Sn content than the nominal target of 8 percent Sn. Device detection range is significantly improved compared to previous work - with cutoff wavelength increased up to 2.7 micro at 300 K, in parallel with high avalanche gain at 77 K up to 21 at 1.55 micro and up to 52 at 2 micro, and good responsivity in SWIR or e-SWIR range, up to 1.45 AW-1 at 1.55 micro and 0.66 AW-1 at 2 micro.

physics.app-ph↗

arXiv2026

Octave-Spanning Terahertz Quarter-Wave Plates Based on Over-Coupled Fabry-Pérot Resonances in Reflective Metal-Dielectric-Metal Metasurfaces

Compact devices for broadband polarization control in the terahertz (THz) regime are challenging due to the intrinsic phase dispersion of birefringent materials and resonant structures. Here, we demonstrate high-performance broadband THz quarter-wave plates based on over-coupled metal-dielectric-metal reflective metasurfaces. The devices operate as single-port anisotropic Fabry-Pérot cavities in which the phase dispersion of over-coupled resonances is engineered to produce an approximately constant relative phase delay between orthogonal field components. By tailoring the metasurface geometry, efficient linear-to-circular polarization conversion is achieved while maintaining high reflectance. Four complementary metasurface designs, operated at an incidence angle of $45^\circ$, collectively cover the 0.25--3 THz frequency range accessible to a typical THz time-domain spectroscopy system. Each device exhibits an approximately octave-wide bandwidth with an axial ratio below 3\,dB and polarization conversion efficiencies exceeding 80\% across most of the operating band. Systematic optimization suppresses coupling to higher-order diffraction and surface wave modes, further extending the usable bandwidth while preserving the required phase relationship. The metasurfaces are compatible with wafer-scale fabrication, and experimental results show excellent agreement with simulations. These findings establish over-coupled reflective metasurfaces as a robust and versatile platform for broadband THz polarization control.

physics.optics↗

arXiv2026

Systematic study of high performance GeSn photodiodes with thick absorber for SWIR and extended SWIR detection

Germanium-tin (GeSn) photodiodes potentiate a viable solution to integrate SWIR and extended SWIR detection technology into CMOS processing line. However, challenges in the growth of thick, high quality GeSn limit the device absorber thickness, making it impossible to ascertain the performance limit of GeSn photodiodes. An in-depth understanding of their device physics and a clear optimization pathway towards commercial-grade devices remain elusive. This work presents a systematic empirical study of GeSn photodiodes with thick absorber (2 to 8% Sn content, up to 2630 nm thick), showing high responsivity up to 0.59 A.W-1 at 1.55 μm and 0.43 A.W-1 at 2 μm wavelengths, low dark current density down to 2 x 10-2 A.cm-2, and high detection cutoff wavelengths up to 2.1 and 2.5 μm at 5% and 8% Sn, respectively. Using specific doping design (P-i-N and N-i-P), an in-depth analysis is presented on the impact of junction position, p-type background carrier concentration, bulk/ surface defects and photocarrier diffusion length - on photodetection performance. Different optimization strategies for GeSn photodiodes, in particular at high Sn content, are proposed.

physics.ins-det↗

arXiv2026

Self-Aligned Heterogeneous Quantum Photonic Integration

Integrated quantum photonics holds significant promise for scalable photonic quantum information processing, quantum repeaters, and quantum networks, but its development is hindered by the mismatch between materials hosting high-quality quantum emitters and those compatible with mature photonic technologies. Heterogeneous integration offers a potential solution to this challenge, yet practical implementations have been limited by inevitable insertion losses at material interfaces. Here, we present a self-aligned heterogeneous quantum photonic integration approach that can deterministically achieve near-unity coupling efficiency at the interface. To showcase our approach, we demonstrate Purcell enhancement of a silicon vacancy (SiV) center in diamond induced by a heterogeneous photonic crystal cavity defined by titanium dioxide (TiO2), as well as optical spin control and readout via a TiO2 photonic circuit. We further show that, when combined with inverse photonic design, our approach enables efficient and broadband collection of single photons from a color center into a heterogeneous waveguide. Our approach is not restricted to SiV centers or TiO2; it can be broadly applied to integrate diverse solid-state quantum emitters with thin-film photonic devices where conformal deposition is possible. Together, these results establish a practical route to scalable quantum photonic integrated circuits that combine high-quality quantum emitters with technologically mature photonic platforms.

physics.optics↗

arXiv2025

Breakdown of the Kirchhoff's law of thermal radiation by a spatiotemporally modulated nonreciprocal metasurface

Kirchhoff's law of thermal radiation, which dictates that the emissivity of a surface equals its absorptivity under thermal equilibrium, which dictates that the emissivity of a surface equals its absorptivity under thermal equilibrium, fundamentally limits the efficiency of photonic systems by enforcing reciprocal energy exchange between source and detector. Breaking this reciprocity is particularly important for advancing photonic devices for energy conversion, radiative cooling, and mid-infrared sensing and imaging. Driven by the growing need for photonic platforms to overcome reciprocity constraints, we present the first demonstration of spatiotemporally modulated nonreciprocal metasurfaces operating at mid-infrared frequencies suitable for the violation of the Kirchhoff's law at room temperature. We fabricate a graphene-based integrated photonic structure and experimentally demonstrate nonreciprocal reflection from a metasurface modulated at gigahertz frequencies. We develop a theoretical framework to relate nonreciprocal scattering under spatiotemporal modulation with unequal absorptivity and emissivity for violation of the spectral directional Kirchhoff's law. Our experiment and theory imply effective decoupling of absorption and emission channels by breaking time-reversal symmetry at thermal wavelengths.

physics.optics↗

arXiv2023

Light-Driven Nanoscale Vectorial Currents

Controlled charge flows are fundamental to many areas of science and technology, serving as carriers of energy and information, as probes of material properties and dynamics, and as a means of revealing or even inducing broken symmetries. Emerging methods for light-based current control offer promising routes beyond the speed and adaptability limitations of conventional voltage-driven systems. However, optical generation and manipulation of currents at nanometer spatial scales remains a basic challenge and a crucial step towards scalable optoelectronic systems for microelectronics and information science. Here, we introduce vectorial optoelectronic metasurfaces in which ultrafast light pulses induce local directional charge flows around symmetry-broken plasmonic nanostructures, with tunable responses and arbitrary patterning down to sub-diffractive nanometer scales. Local symmetries and vectorial current distributions are revealed by polarization- and wavelength-sensitive electrical readout and terahertz (THz) emission, while spatially-tailored global currents are demonstrated in the direct generation of elusive broadband THz vector beams. We show that in graphene, a detailed interplay between electrodynamic, thermodynamic, and hydrodynamic degrees of freedom gives rise to rapidly-evolving nanoscale driving forces and charge flows under extreme temporal and spatial confinement. These results set the stage for versatile patterning and optical control over nanoscale currents in materials diagnostics, THz spectroscopies, nano-magnetism, and ultrafast information processing.

cond-mat.mes-hall↗

arXiv2020

Intra-Utterance Similarity Preserving Knowledge Distillation for Audio Tagging

Knowledge Distillation (KD) is a popular area of research for reducing the size of large models while still maintaining good performance. The outputs of larger teacher models are used to guide the training of smaller student models. Given the repetitive nature of acoustic events, we propose to leverage this information to regulate the KD training for Audio Tagging. This novel KD method, "Intra-Utterance Similarity Preserving KD" (IUSP), shows promising results for the audio tagging task. It is motivated by the previously published KD method: "Similarity Preserving KD" (SP). However, instead of preserving the pairwise similarities between inputs within a mini-batch, our method preserves the pairwise similarities between the frames of a single input utterance. Our proposed KD method, IUSP, shows consistent improvements over SP across student models of different sizes on the DCASE 2019 Task 5 dataset for audio tagging. There is a 27.1% to 122.4% percent increase in improvement of micro AUPRC over the baseline relative to SP's improvement of over the baseline.

eess.AS↗

arXiv2018

High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting

Solar energy promises a viable solution to meet the ever-increasing power demand by providing a clean, renewable energy alternative to fossil fuels. For solar thermophotovoltaics (STPV), high-temperature absorbers and emitters with strong spectral selectivity are imperative to efficiently couple solar radiation into photovoltaic cells. Here, we demonstrate refractory metasurfaces for STPV with tailored absorptance and emittance characterized by in-situ high-temperature measurements, featuring thermal stability up to at least 1200 C. Our tungsten-based metasurface absorbers have close-to-unity absorption from visible to near infrared and strongly suppressed emission at longer wavelengths, while our metasurface emitters provide wavelength-selective emission spectrally matched to the band-edge of InGaAsSb photovoltaic cells. The projected overall STPV efficiency is as high as 18% when employing a fully integrated absorber/emitter metasurface structure, much higher than those achievable by stand-alone PV cells. Our work opens a path forward for high-performance STPV systems based on refractory metasurface structures.

physics.app-ph↗