Searcharxiv⌕ Search

arXiv subjects

Chunguang Jing

Publications and source records attributed to Chunguang Jing.

At least 19 recordsLinked to original sources
arXiv2025

Design Initiative for a 10 TeV pCM Wakefield Collider

This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress resulting from a global R\&D program in order to deliver a unified, 10 TeV Wakefield Collider concept. Wakefield Accelerators provide ultra-high accelerating gradients which enables an upgrade path that will extend the reach of Linear Colliders beyond the electroweak scale. Here, we describe the organization of the Design Study including timeline and deliverables, and we detail the requirements and challenges on the path to a 10 TeV Wakefield Collider.

physics.acc-ph↗
arXiv2025

Short-Pulse Driven Radiofrequency X-Band Photoinjector: Electromagnetic Properties and Beam Dynamics in the Transient Regime

This paper presents a study of the radiofrequency (RF) characteristics and beam dynamics of an X-band photogun (Xgun) operating in the transient state. The photoinjector is designed to operate with short RF pulses (9 ns) to achieve high accelerating gradients. Short-pulse operation potentially reduces breakdown risks, as experimentally demonstrated by achieving a gradient exceeding 350 MV/m. However, the short pulse duration causes the cavity to operate in a transient regime where the electromagnetic field deviates from the conventional steady-state condition. To investigate the effects of deviations from steady-state operation, the time-dependent spatial evolution of the cavity fields was examined using both 9-ns and 50-ns RF pulses. The 50-ns pulse served as a reference to characterize the cavity behavior under a fully filled steady-state condition. Beam dynamics simulations were conducted to explore the impact of transient RF effects on beam kinetic energy, transverse emittance, and bunch length; these simulations employed a new dynamic field mapping approach to model transient RF fields.

physics.acc-ph↗
arXiv2022

RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021

Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones.

physics.acc-ph↗
arXiv2022

C$^3$ Demonstration Research and Development Plan

C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.

physics.acc-ph↗
arXiv2022

Advanced RF Structures for Wakefield Acceleration and High-Gradient Research

Structure wakefield acceleration (SWFA) is one of the most promising AAC schemes in several recent strategic reports, including DOE's 2016 AAC Roadmap, report on the Advanced and Novel Accelerators for High Energy Physics Roadmap (ANAR), and report on Accelerator and Beam Physics Research Goals and Opportunities. SWFA aims to raise the gradient beyond the limits of conventional radiofrequency (RF) accelerator technology, and thus the RF to beam energy efficiency, by reducing RF breakdowns from confining the microwave energy in a short (on the order of about 10 ns) and intense pulse excited by a drive beam. We envision that the following research topics, within the scope of AF7, are of great interest in the next decade: advanced wakefield structures, terahertz and sub-terahertz (THz) structures, and RF breakdown physics. Research on SWFA in the above directions would directly contribute to long-term large-scale applications, including AAC-based linear colliders and compact light sources. There is also potentially a strong synergy between SWFA and other AAC concepts, when structures are combined with plasmas into hybrid AAC schemes. Research on novel structures is at the core of advancing SWFA, and is critical to future AAC-based linear colliders; at the same, it has a strong synergy with other directions, such as cavity designs, high-power microwave systems and sources, and compact light sources.

physics.acc-ph↗
arXiv2022

Continuous and Coordinated Efforts of Structure Wakefield Acceleration (SWFA) Development for an Energy Frontier Machine

Structure wakefield acceleration (SWFA) is well suited for the linear collider (LC) application due to its natural ability to accelerate positrons and preserve emittance. Under the SWFA roadmap, which was developed in response to Snowmass 2013 recommendations, four principal technologies: drive beam, main beam, wakefield structure, and LC facility design, have been investigated. The two SWFA schemes under development are the collinear wakefield accelerator (CWA), in which the drive and main beam follow the same path through a structure, and the two-beam accelerator (TBA), where the drive and main beam pass through different structures. To further advance the SWFA technology in the next decade, continuous and coordinated efforts must be carried out in a more synchronized way. This whitepaper is written to address the research needs in SWFA for preparation of Snowmass 2022.

physics.acc-ph↗
arXiv2021

Design, fabrication and low-power RF measurement of an X-band dielectric-loaded accelerating structure

Dielectric-loaded accelerating (DLA) structures are being studied as an alternative to conventional disk-loaded copper structures to produce the high accelerating gradient. This paper presents the design, fabrication and low-power RF measurement of an externally-powered X-band DLA structure with a dielectric constant epsilon_r=16.66 and a loss tangent tan_delta=0.0000343. A dielectric matching section for coupling the RF power from a circular waveguide to an X-band DLA structure consists of a very compact dielectric disk with a width of 2.035 mm and a tilt angle of 60 degree, resulting in a broadband coupling at a low RF field which has the potential to survive in the high-power environment. Based on simulation studies, a prototype of the DLA structure was fabricated. Results from bench measurements and their comparison with design values are presented. The detailed analysis on the fabrication error which may cause the discrepancy between the RF measurements and simulations is also discussed.

physics.acc-ph↗
arXiv2020

A compact, low field, broadband matching section for externally-powered X-band dielectric-loaded accelerating structures

It has been technically challenging to efficiently couple external radiofrequency (RF) power to cylindrical dielectric-loaded accelerating (DLA) structures, especially when the DLA structure has a high dielectric constant. This paper presents a novel design of matching section for coupling the RF power from a circular waveguide to an X-band DLA structure with a dielectric constant epsilon_r=16.66 and a loss tangent tan_delta=0.0000343. It consists of a very compact dielectric disk with a width of 2.035 mm and a tilt angle of 60 degree, resulting in a broadband coupling at a low RF field which has the potential to survive in the high-power environment. To prevent a sharp dielectric corner break, a 45 degree chamfer is also added. A microscale vacuum gap, caused by metallic clamping between the thin coating and the outer thick copper jacket, is also studied in detail. Through optimizations, more than 99% of RF power is coupled into the DLA structure, with the maximum electromagnetic fields located at a DLA structure. Tolerance studies on the geometrical parameters and mechanical design of the full-assembly structure are also carried out as a reference for realistic fabrication.

physics.acc-ph↗
arXiv2020

Rapid thermal emittance and quantum efficiency mapping of a cesium telluride cathode in an rf photoinjector using multiple laser beamlets

Thermal emittance and quantum efficiency (QE) are key figures of merit of photocathodes, and their uniformity is critical to high-performance photoinjectors. Several QE mapping technologies have been successfully developed; however, there is still a dearth of information on thermal emittance maps. This is because of the extremely time-consuming procedure to gather measurements by scanning a small beam across the cathode with fine steps. To simplify the mapping procedure, and to reduce the time required to take measurements, we propose a new method that requires only a single scan of the solenoid current to simultaneously obtain thermal emittance and QE distribution by using a pattern beam with multiple beamlets. In this paper, its feasibility has been confirmed by both beam dynamics simulation and theoretical analysis. The method has been successfully demonstrated in a proof-of-principle experiment using an L-band radiofrequency photoinjector with a cesium telluride cathode. In the experiment, seven beamlets were generated from a microlens array system and their corresponding thermal emittance and QE varied from 0.93 to 1.14 $μ$m/mm and from 4.6 to 8.7%, respectively. We also discuss the limitations and future improvements of the method in this paper.

physics.acc-ph↗
arXiv2020

Demonstration of Planar Ultrananocrystalline Diamond Field Emission Source Operating in SRF Injector at 2 Kelvin

Reported here is the first demonstration of electron beam generation in an SRF TESLA 1.3 GHz gun equipped with field emission cathode when operated at 2 Kelvin. The cathode is submicron film of nitrogen-incorporated ultrananocrystalline diamond [(N)UNCD] deposited atop a Nb RRR300 cathode plug. The output current was measured to increase exponentially as a function of the cavity gradient. Our results demonstrate a feasible path toward simplified fully cryogenic SRF injector technology. One important finding is that the electron emitter made of (N)UNCD, a material long been known as a highly efficient field emission material, demonstrated a record low turn-on gradient of 0.6 MV/m. A hypothesis explaining this behavior is proposed.

physics.acc-ph↗
arXiv2019

Transition radiation in photonic topological crystals: quasi-resonant excitation of robust edge states by a moving charge

We demonstrate, theoretically and experimentally, that a traveling electric charge passing from one photonic crystal into another generates edge waves -- electromagnetic modes with frequencies inside the common photonic bandgap localized at the interface -- via a process of transition edge-wave radiation (TER). A simple and intuitive expression for the TER spectral density is derived and then applied to a specific structure: two interfacing photonic topological insulators with opposite spin-Chern indices. We show that TER breaks the time-reversal symmetry and enables valley- and spin-polarized generation of topologically protected edge waves propagating in one or both directions along the interface. Experimental measurements at the Argonne Wakefield Accelerator Facility are consistent with the excitation and localization of the edge waves. The concept of TER paves the way for novel particle accelerators and detectors.

physics.optics↗
arXiv2019

Development and high-power testing of an X-band dielectric-loaded power extractor

Dielectric loaded structures are promising candidates for use in the structure wakefield acceleration (SWFA) technique, for both the collinear wakefield and the two-beam acceleration (CWA and TBA respectively) approaches, due to their low fabrication cost, low rf losses, and the potential to withstand high gradient. A short pulse (<=20 ns) TBA program is under development at the Argonne Wakefield Accelerator (AWA) facility where dielectric loaded structures are being used for both the power extractor/transfer structure (PETS) and the accelerator. In this study, an X-band 11.7 GHz dielectric PETS was developed and tested at the AWA facility to demonstrate high power wakefield generation. The PETS was driven by a train of eight electron bunches separated by 769.2 ps (9 times of the X-band rf period) in order to achieve coherent wakefield superposition. A total train charge of 360 nC was passed through the PETS structure to generate ~200 MW, ~3 ns flat-top rf pulses without rf breakdown. A future experiment is being planned to increase the generated rf power to approximately ~1 GW by optimizing the structure design and improving the drive beam quality.

physics.acc-ph↗
arXiv2019

Femtosecond relativistic electron beam with reduced timing jitter from THz-driven beam compression

We propose and demonstrate a novel method to reduce the pulse width and timing jitter of a relativistic electron beam through THz-driven beam compression. In this method the longitudinal phase space of a relativistic electron beam is manipulated by a linearly polarized THz pulse in a dielectric tube such that the bunch tail has a higher velocity than the bunch head, which allows simultaneous reduction of both pulse width and timing jitter after passing through a drift. In this experiment, the beam is compressed by more than a factor of four from 130 fs to 28 fs with the arrival time jitter also reduced from 97 fs to 36 fs, opening up new opportunities in using pulsed electron beams for studies of ultrafast dynamics. This technique extends the well known rf buncher to the THz frequency and may have a strong impact in accelerator and ultrafast science facilities that require femtosecond electron beams with tight synchronization to external lasers.

physics.acc-ph↗
arXiv2019

Experimental demonstration of the correction of coupled transverse dynamics aberration in an rf photoinjector

The production of electron bunches with low transverse emittance approaches the thermal emittance of the photocathode as various aberrations are corrected. Recently, the coupled transverse dynamics aberration was theoretically identified as a significant source of emittance growth and a corrector magnet was proposed for its elimination [D.H. Dowell, F. Zhou, and J. Schmerge, PRAB 21, 010101 (2018)]. This aberration arises when the beam acquires an asymmetric distribution that is then rotated with respect to the transverse reference axis thus introducing a correlation in the vertical and horizontal planes. The asymmetry is introduced by a weak quadrupole field in the rf gun or emittance compensation solenoid and the rotation is caused by the solenoid. This Letter presents an experimental study of the coupled transverse dynamics aberration in an rf photoinjector and demonstrates its elimination by a quadrupole corrector consisting of a normal and a skew quadrupole. The experimental results agree well with theoretical predictions and numerical simulations. The study also demonstrates the emittance of a low charge beam can be preserved during transportation at its thermal value, which was 1.05 mm mrad/mm, for the cesium telluride photocathode and 248 nm UV laser used.

physics.acc-ph↗
arXiv2019

Terahertz oscilloscope for recording time information of ultrashort electron beams

We propose and demonstrate a Terahertz (THz) oscilloscope for recording time information of an ultrashort electron beam. By injecting a laser-driven THz pulse with circular polarization into a dielectric tube, the electron beam is swept helically such that the time information is uniformly encoded into the angular distribution that allows one to characterize both the temporal profile and timing jitter of an electron beam. The dynamic range of the measurement in such a configuration is significantly increased compared to deflection with a linearly polarized THz pulse. With this THz oscilloscope, nearly 50-fold longitudinal compression of a relativistic electron beam to about 15 fs (rms) is directly visualized with its arrival time determined with 3 fs accuracy. This technique bridges the gap between streaking of photoelectrons with optical lasers and deflection of relativistic electron beams with radio-frequency deflectors, and should have wide applications in many ultrashort electron beam based facilities.

physics.acc-ph↗
arXiv2018

Overestimation of thermal emittance in solenoid scans due to coupled transverse motion

The solenoid scan is a widely used method for the in-situ measurement of the thermal emittance in a photocathode gun. The popularity of this method is due to its simplicity and convenience since all rf photocathode guns are equipped with an emittance compensation solenoid. This paper shows that the solenoid scan measurement overestimates the thermal emittance in the ordinary measurement configuration due to a weak quadrupole field (present in either the rf gun or gun solenoid) followed by a rotation in the solenoid. This coupled transverse dynamics aberration introduces a correlation between the beam's horizontal and vertical motion leading to an increase in the measured 2D transverse emittance, thus the overestimation of the thermal emittance. This effect was systematically studied using both analytic expressions and numerical simulations. These studies were experimentally verified using an L-band 1.6-cell rf photocathode gun with a cesium telluride cathode, which shows a thermal emittance overestimation of 35% with a rms laser spot size of 2.7 mm. The paper concludes by showing that the accuracy of the solenoid scan can be improved by using a quadrupole magnet corrector, consisting of a pair of normal and skew quadrupole magnets.

physics.acc-ph↗
arXiv2018

Mean Transverse Energy of Ultrananocrystalline Diamond Photocathode

Nitrogen incorporated ultrananocrystalline diamond ((N)UNCD) could be an enabling material platform for photocathode applications due to its high emissivity. While the quantum efficiency (QE) of UNCD was reported by many groups, no experimental measurements of the intrinsic emittance/mean transverse energy (MTE) have been reported. Here, MTE measurement results for an (N)UNCD photocathode in the photon energy range of 4.41 to 5.26 eV are described. The MTE demonstrates no noticeable dependence on the photon energy, with an average value of 266 meV. This spectral behavior is shown to not to be dependent upon physical or chemical surface roughness and inconsistent with low electron effective mass emission from graphitic grain boundaries, but may be associated with emission from spatially-confined states in the graphite regions between the diamond grains. The combined effect of fast-growing QE and constant MTE with respect to the excess laser energy may pave the way to bright UNCD photocathodes.

cond-mat.mtrl-sci↗