SearcharxivSearch

arXiv subjects

Chunming Zhu

Publications and source records attributed to Chunming Zhu.

13 recordsLinked to original sources

Energy Evolution from the Chromosphere to the Heliosphere in the 2021 October 28 Solar Eruption

We perform a detailed study of the energetics for a well-observed solar eruption and flare that occurred on 28 October 2021. This event included a GOES class X1.0 flare, a global EUV wave, and a coronal mass ejection that reached speeds of >2000 km/s. The event was observed from a variety of spacecraft in NASA's Heliophysics System Observatory, including multiple missions near Earth, STEREO-A off the Sun-Earth line, and Solar Orbiter, near the Sun-Earth line at about 0.8 au. Using remote sensing, in situ observations, and in some cases scaling laws based on previous observations, we characterize the following quantities: free magnetic energy, energy in non-thermal electrons, energy in non-thermal ions, bolometric energy, energy deposited in the chromosphere, thermal energy radiated in the flare loops, energy dissipated by the EUV wave, CME kinetic and gravitational potential energy, CME energy flux in the heliosphere, and the energy partition in the CME shock. We find that the total energy released during the event is consistent with estimates of the pre-event stored magnetic energy, and the CME kinetic + potential energy dominates the energy partition.

astro-ph.SR

Investigating pre-eruptive magnetic properties at the footprints of erupting magnetic flux ropes

It is well established that solar eruptions are powered by free magnetic energy stored in current-carrying magnetic field in the corona. It has also been generally accepted that magnetic flux ropes (MFRs) are a critical component of many coronal mass ejections (CMEs). What remains controversial is whether MFRs are present well before the eruption. Our aim is to identify progenitors of MFRs, and investigate pre-eruptive magnetic properties associated with these progenitors. Here we analyze 28 MFRs erupting within 45 deg from the disk center from 2010 to 2015. All MFRs'feet are well identified by conjugate coronal dimmings. We then calculate magnetic properties at the feet of the MFRs, prior to their eruptions, using Helioseismic and Magnetic Imager (HMI) vector magnetograms. Our results show that only 8 erupting MFRs are associated with significant non-neutralized electric currents, 4 of which also exhibit pre-eruptive dimmings at the foot-prints. Twist and current distributions are asymmetric at the two feet of these MFRs. The presence of pre-eruption dimmings associated with non-neutralized currents suggests the pre-existing MFRs. Furthermore, evolution of conjugate dimmings and electric currents within the foot-prints can provide clues about the internal structure of MFRs and their formation mechanism.

astro-ph.SR

Validation and interpretation of three-dimensional configuration of a magnetic cloud flux rope

One "strong" magnetic cloud (MC) with the magnetic field magnitude reaching $\sim$ 40 nT at 1 au during 2012 June 16-17 is examined in association with a pre-existing magnetic flux rope (MFR) identified on the Sun. The MC is characterized by a quasi-three dimensional (3D) flux rope model based on in situ measurements from the Wind spacecraft. The magnetic flux contents and other parameters are quantified. In addition, a correlative study with the corresponding measurements of the same structure crossed by the Venus Express (VEX) spacecraft at a heliocentric distance 0.7 au and with an angular separation $\sim 6^\circ$ in longitude is performed to validate the MC modeling results. The spatial variation between the Wind and VEX magnetic field measurements is attributed to the 3D configuration of the structure as featured by a knotted bundle of flux. The comparison of the magnetic flux contents between the MC and the source region on the Sun indicates that the 3D reconnection process accompanying an M1.9 flare may correspond to the magnetic reconnection between the field lines of the pre-existing MFR rooted in the opposite polarity footpoints. Such a process reduces the amount of the axial magnetic flux in the erupted flux rope, by approximately 50\%, in this case.

astro-ph.SR

Connecting Chromospheric Condensation Signatures to Reconnection Driven Heating Rates in an Observed Flare

Observations of solar flare reconnection at very high spatial and temporal resolution can be made indirectly at the footpoints of reconnected loops into which flare energy is deposited. The response of the lower atmosphere to this energy input includes a downward-propagating shock called chromospheric condensation, which can be observed in the UV and visible. In order to characterize reconnection using high-resolution observations of this response, one must develop a quantitative relationship between the two. Such a relation was recently developed and here we test it on observations of chromospheric condensation in a single footpoint from a flare ribbon of the X1.0 flare on 25 Oct. 2014 (SOL2014-10-25T16:56:36). Measurements taken of Si iv 1402.77 Å emission spectra using the Interface Region Imaging Spectrograph (IRIS) in a single pixel show red-shifted component undergoing characteristic condensation evolution. We apply the technique called the Ultraviolet Footpoint Calorimeter (UFC) to infer energy deposition into the one footpoint. This energy profile, persisting much longer than the observed condensation, is input into a one-dimensional, hydrodynamic simulation to compute the chromospheric response, which contains a very brief condensation episode. From this simulation we synthesize Si iv spectra and compute the time-evolving Doppler velocity. The synthetic velocity evolution is found to compare reasonably well with the IRIS observation, thus corroborating our reconnection-condensation relationship. The exercise reveals that the chromospheric condensation characterizes a particular portion of the reconnection energy release rather than its entirety, and that the time scale of condensation does not necessarily reflect the time scale of energy input.

astro-ph.SR

On the quasi-three dimensional configuration of magnetic clouds

We develop an optimization approach to model the magnetic field configuration of magnetic clouds, based on a linear-force free formulation in three dimensions. Such a solution, dubbed the Freidberg solution, is kin to the axi-symmetric Lundquist solution, but with more general "helical symmetry". The merit of our approach is demonstrated via its application to two case studies of in-situ measured magnetic clouds. Both yield results of reduced $χ^2\approx 1$. Case 1 shows a winding flux rope configuration with one major polarity. Case 2 exhibits a double-helix configuration with two flux bundles winding around each other and rooted on regions of mixed polarities. This study demonstrates the three-dimensional complexity of the magnetic cloud structures.

astro-ph.SR

How Does Magnetic Reconnection Drive the Early Stage Evolution of Coronal Mass Ejections?

Theoretically, CME kinematics are related to magnetic reconnection processes in the solar corona. However, the current quantitative understanding of this relationship is based on the analysis of only a handful of events. Here we report a statistical study of 60 CME-flare events from August 2010 to December 2013. We investigate kinematic properties of CMEs and magnetic reconnection in the low corona during the early phase of the eruptions, by combining limb observations from STEREO with simultaneous on-disk views from SDO. For a subset of 42 events with reconnection rate evaluated by the magnetic fluxes swept by the flare ribbons on the solar disk observed from SDO, we find a strong correlation between the peak CME acceleration and the peak reconnection rate. Also, the maximum velocities of relatively fast CMEs (> 600 km/s) are positively correlated with the reconnection flux, but no such correlation is found for slow CMEs. A time-lagged correlation analysis suggests that the distribution of the time lag of CME acceleration relative to reconnection rate exhibits three peaks, approximately 10 minutes apart, and on average, acceleration-lead events have smaller reconnection rates. We further compare the CME total mechanical energy with the estimated energy in the current sheet. The comparison suggests that, for small-flare events, reconnection in the current sheet alone is insufficient to fuel CMEs. Results from this study suggest that flare reconnection may dominate the acceleration of fast CMEs, but for events of slow CMEs and weak reconnection, other mechanisms may be more important.

astro-ph.SR

Evolution of A Magnetic Flux Rope toward Eruption

It is well accepted that a magnetic flux rope (MFR) is a critical component of many coronal mass ejections (CMEs), yet how it evolves toward eruption remains unclear. Here we investigate the continuous evolution of a pre-existing MFR, which is rooted in strong photospheric magnetic fields and electric currents. The evolution of the MFR is observed by the Solar Terrestrial Relations Observatory (STEREO) and the Solar Dynamics Observatory (SDO) from multiple viewpoints. From STEREO's perspective, the MFR starts to rise slowly above the limb five hours before it erupts as a halo CME on 2012 June 14. In SDO observations, conjugate dimmings develop on the disk, simultaneously with the gradual expansion of the MFR, suggesting that the dimmings map the MFR's feet. The evolution comprises a two-stage gradual expansion followed by another stage of rapid acceleration/eruption. Quantitative measurements indicate that magnetic twist of the MFR increases from 1.0 +/- 0.5 to 2.0 +/- 0.5 turns during the five-hour expansion, and further increases to about 4.0 turns per AU when detected as a magnetic cloud at 1 AU two day later. In addition, each stage is preceded by flare(s), implying reconnection is actively involved in the evolution and eruption of the MFR. The implications of these measurements on the CME initiation mechanisms are discussed.

astro-ph.SR

Formation of Large Scale Coronal Loops Interconnecting Two Active Regions Through Gradual Magnetic Reconnection and Associated Heating Process

Coronal loops interconnecting two active regions, called as interconnecting loops (ILs), are prominent large-scale structures in the solar atmosphere. They carry a significant amount of magnetic flux, therefore are considered to be an important element of the solar dynamo process. Earlier observations show that eruptions of ILs are an important source of CMEs. It is generally believed that ILs are formed through magnetic reconnection in the high corona (>150-200"), and several scenarios have been proposed to explain their brightening in soft X-rays (SXRs). Yet, the detailed IL formation process has not been fully explored and the associated energy release in the corona still remains unresolved. Here we report the complete formation process of a set of ILs connecting two nearby active regions, with successive observations by STEREO-A on the far side of the Sun and SDO and Hinode on the Earth side. We conclude that ILs are formed by gradual reconnection high in the corona, in line with earlier postulations. In addition, we show evidence supporting that ILs become brightened in SXRs and EUVs through heating at or close to the reconnection site in the corona (i.e., through direct heating process of reconnection), a process that has been largely overlooked in earlier studies on ILs

astro-ph.SR

Two-Phase Heating in Flaring Loops

We analyze and model a C5.7 two-ribbon solar flare observed by SDO, Hinode and GOES on 2011 December 26. The flare is made of many loops formed and heated successively over one and half hours, and their footpoints are brightened in the UV 1600 A before enhanced soft X-ray and EUV missions are observed in flare loops. Assuming that anchored at each brightened UV pixel is a half flaring loop, we identify more than 6,700 half flaring loops, and infer the heating rate of each loop from the UV light curve at the foot-point. In each half loop, the heating rate consists of two phases, an intense impulsive heating followed by a low-rate heating persistent for more than 20 minutes. Using these heating rates, we simulate the evolution of their coronal temperatures and densities with the model of "enthalpy-based thermal evolution of loops" (EBTEL). In the model, suppression of thermal conduction is also considered. This model successfully reproduces total soft X-ray and EUV light curves observed in fifteen pass-bands by four instruments GOES, AIA, XRT, and EVE. In this flare, a total energy of 4.9x10^30 ergs is required to heat the corona, around 40% of this energy is in the slow heating phase. About two fifth of the total energy used to heat the corona is radiated by the coronal plasmas, and the other three fifth transported to the lower atmosphere by thermal conduction.

astro-ph.SR

Witnessing a Large-scale Slipping Magnetic Reconnection along a Dimming Channel during a Solar Flare

We report the intriguing large-scale dynamic phenomena associated with the M6.5 flare~(SOL2015-06-22T18:23) in NOAA active region 12371, observed by RHESSI, Fermi, and the Atmospheric Image Assembly (AIA) and Magnetic Imager (HMI) on the Solar Dynamic Observatory (SDO). The most interesting feature of this event is a third ribbon (R3) arising in the decay phase, propagating along a dimming channel (seen in EUV passbands) towards a neighboring sunspot. The propagation of R3 occurs in the presence of hard X-ray footpoint emission, and is broadly visible at temperatures from 0.6~MK to over 10~MK through the Differential Emission Measure (DEM) analysis. The coronal loops then undergo an apparent slipping motion following the same path of R3, after a $\sim$ 80~min delay. To understand the underlying physics, we investigate the magnetic configuration and the thermal structure of the flaring region. Our results are in favor of a slipping-type reconnection followed by the thermodynamic evolution of coronal loops. In comparison with those previously reported slipping reconnection events, this one proceeds across a particularly long distance ($\sim$60 Mm) over a long period of time ($\sim$50 min), and shows two clearly distinguished phases: the propagation of the footpoint brightening driven by nonthermal particle injection and the apparent slippage of loops governed by plasma heating and subsequent cooling.

astro-ph.SR

Evolution of a Current Sheet in a Solar Flare

We report multi-wavelength and multi-viewpoint observations of a solar eruptive event which involves loop-loop interactions. During a C2.0 flare, motions associated with inflowing and outflowing plasma provide evidence for ongoing magnetic reconnection. The flare loop top and a rising "concave-up" feature are connected by a current-sheet-like structure (CSLS). The physical properties (thickness, length, temperature, and density) of the CSLS are evaluated. In regions adjacent to the CSLS, the EUV emission (characteristic temperature at 1.6 MK) begins to increase more than ten minutes prior to the onset of the flare, and steeply decreases during the decay phase. The reduction of the emission resembles that expected from coronal dimming. The dynamics of this event imply a magnetic reconnection rate in the range 0.01 -- 0.05.

astro-ph.SR

Complex Flare Dynamics Initiated by a Filament-Filament Interaction

We report on an eruption involving a relatively rare filament-filament interaction on 2013 June 21, observed by SDO and STEREO-B. The two filaments were separated in height with a 'double-decker' configuration. The eruption of the lower filament began simultaneously with a descent of the upper filament resulting in a convergence and direct interaction of the two filaments. The interaction was accompanied by the heating of surrounding plasma and an apparent crossing of a loop-like structure through the upper filament. The subsequent coalescence of the filaments drove a bright front ahead of the erupting structures. The whole process was associated with a C3.0 flare followed immediately by an M2.9 flare. Shrinking loops and descending dark voids were observed during the M2.9 flare at different locations above a C-shaped flare arcade as part of the energy release, giving us a unique insight into the flare dynamics.

astro-ph.SR

On Asymmetry of Magnetic Helicity in Emerging Active Regions: High Resolution Observations

We employ the DAVE (differential affine velocity estimator, Schuck 2005; 2006) tracking technique on a time series of MDI/1m high spatial resolution line- of-sight magnetograms to measure the photospheric flow velocity for three newly emerging bipolar active regions. We separately calculate the magnetic helicity injection rate of the leading and following polarities to confirm or refute the magnetic helicity asymmetry, found by Tian & Alexander (2009) using MDI/96m low spatial resolution magnetograms. Our results demonstrate that the magnetic helicity asymmetry is robust being present in the three active regions studied, two of which have an observed balance of the magnetic flux. The magnetic helicity injection rate measured is found to depend little on the window size selected, but does depend on the time interval used between the two successive magnetograms tracked. It is found that the measurement of the magnetic helicity injection rate performs well for a window size between 12x10 and 18x15 pixels, and at a time interval Δt=10 minutes. Moreover, the short-lived magnetic structures, 10-60 minutes, are found to contribute 30-50% of the magnetic helicity injection rate. Comparing with the results calculated by MDI/96m data, we find that the MDI/96m data, in general, can outline the main trend of the magnetic properties, but they significantly underestimate the magnetic flux in strong field region and are not appropriate for quantitative tracking studies, so provide a poor estimate of the amount of magnetic helicity injected into the corona.

astro-ph.SR