arXiv subjects

Chunqing Deng

Publications and source records attributed to Chunqing Deng.

At least 19 recordsLinked to original sources

arXiv2026

Mitigating Capacitive Loading Enables Fast Two-Qubit Gates in Highly Connected Fluxonium Quantum Processors

Fluxonium qubits combine long coherence times with strong anharmonicity, making them attractive for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity two-qubit gates and multi-qubit entanglement in one-dimensional and connectivity-four fluxonium processors, motivating their extension to highly connected two-dimensional (2D) architectures. A central challenge in this extension is to achieve strong coupling to multiple circuit elements while preserving the finite capacitance budget of fluxonium qubits, which constrains the attainable qubit-qubit effective coupling strength and, consequently, two-qubit gate performance. Here, we establish a unified theoretical framework that identifies the connectivity-dependent upper bound on capacitive coupling and quantifies its reduction by distinct parasitic-capacitance channels, applicable across both fluxonium and transmon regimes. We show that pad-to-ground loading is primarily geometry limited and can be substantially suppressed through qubit-pad engineering, whereas inter-pad loading is ultimately constrained by parasitic capacitances of Josephson junctions and Josephson junction arrays. Building on these insights, we formulate practical design principles and numerically demonstrate two-qubit gates as fast as 27 ns and leakage-induced infidelity below $10^{-3}$ under representative fabrication variations in 2D fluxonium architectures. These results establish a quantitative framework for understanding and mitigating capacitive loading, suggesting that it does not impose a fundamental performance limit on highly connected fluxonium processors.

quant-ph↗

arXiv2026

Unified Flux Control Architecture for Fluxonium Qubits

Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse ($XY$) and longitudinal ($Z$) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 $\mu$s while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.

quant-ph↗

arXiv2026

System-Level Design of Scalable Fluxonium Quantum Processors with Double-Transmon Couplers

Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.

quant-ph↗

arXiv2026

Millikelvin digital-to-analog converter for superconducting quantum processors

Scaling superconducting quantum processors is increasingly constrained by the wiring, heat load, and calibration overhead associated with delivering high-resolution analog signals from room temperature to qubits at millikelvin temperature. Here we demonstrate a superconducting digital-to-analog converter (DAC) integrated with high-coherence fluxonium qubits in a multi-chip module architecture. The DACs generate persistent analog flux signals for tuning qubit parameters and are programmed deterministically using single-flux-quantum (SFQ) pulses, providing a digital interface compatible with established SFQ routing and demultiplexing technologies. Operating at millikelvin temperature, the DACs enable in-situ tuning of fluxonium qubits without measurable degradation of qubit coherence. The presented device provides a static control primitive for flux-tunable qubits, enabling parameter homogenization and eliminating the need for individual room-temperature DC bias lines. These results establish SFQ-programmable millikelvin DACs as a building block for digitally controlled superconducting quantum processors.

quant-ph↗

arXiv2026

Scalable Fluxonium Quantum Processors via Tunable-Coupler Architecture

Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.

quant-ph↗

arXiv2026

Converting qubit relaxation into erasures with a single fluxonium

Qubits that experience predominantly erasure errors offer distinct advantages for fault-tolerant operation. Indeed, dual-rail encoded erasure qubits in superconducting cavities and transmons have demonstrated high-fidelity operations by converting physical-qubit relaxation into logical-qubit erasures, but this comes at the cost of increased hardware overhead and circuit complexity. Here, we address these limitations by realizing erasure conversion in a single fluxonium operated at zero flux, where the logical state is encoded in its 0-2 subspace. A single, carefully engineered resonator provides both mid-circuit erasure detection and end-of-line (EOL) logical measurement. Post-selection on non-erasure outcomes results in more than four-fold increase of the logical lifetime, from $193~\mu$s to $869~\mu$s. Finally, we characterize measurement-induced logical dephasing as a function of measurement power and frequency, and infer that each erasure check contributes a negligible error of $7.2\times 10^{-5}$. These results establish integer-fluxonium as a promising, resource-efficient platform for erasure-based error mitigation, without requiring additional hardware.

quant-ph↗

arXiv2025

Identify and Quantify Various Dissipation Mechanisms of Josephson Junction in Superconducting Circuits

Pinpointing the dissipation mechanisms and evaluating their impacts to the performance of Josephson junction (JJ) are crucial for its application in superconducting circuits. In this work, we demonstrate the junction-embedded resonator (JER) as a platform which enables us to identify and quantify various dissipation mechanisms of JJ. JER is constructed by embedding JJ in the middle of an open-circuit, 1/2 {\lambda} transmission-line resonator. When the 1st and 2nd harmonics of JER are excited, JJ experiences different boundary conditions, and is dominated by internal and external dissipations, respectively. We systematically study these 2 dissipation mechanisms of JJ by varying the JJ area and number. Our results unveil the completely different behaviors of these 2 dissipation mechanisms, and quantitatively characterize their contributions, shedding a light on the direction of JJ optimization in various applications.

quant-ph↗

arXiv2025

Mitigating state transition errors during readout with a synchronized flux pulse

State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.

quant-ph↗

arXiv2024

High coherence fluxonium manufactured with a wafer-scale uniformity process

Fluxonium qubits are recognized for their high coherence times and high operation fidelities, attributed to their unique design incorporating a superinductor, which is typically implemented using an array of over 100 Josephson junctions. However, this complexity poses significant fabrication challenges, particularly in achieving high yield and junction uniformity with traditional methods. Here, we introduce an overlap process for Josephson junction fabrication that achieves nearly 100% yield and maintains uniformity across a 2-inch wafer with less than 5% variation for the phase slip junction and less than 2% for the entire junction array. We use a compact junction array design that achieves state-of-the-art dielectric loss tangents and flux noise levels, as confirmed by multiple devices. This enables fluxonium qubits to reach energy relaxation times exceeding 1 millisecond at the flux frustration point. This work paves the way for scalable high coherence fluxonium processors using CMOS-compatible processes, marking a significant step towards practical quantum computing.

quant-ph↗

arXiv2024

Efficient initialization of fluxonium qubits based on auxiliary energy levels

Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wavefunctions, the sideband transitions are only enabled by multi-photon processes which requires multi-tone or strong driving. Leveraging the flux-tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a non-computational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300 ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.

quant-ph↗

arXiv2023

Ultrahigh-inductance materials from spinodal decomposition

Disordered superconducting nitrides with kinetic inductance have long been considered a leading material candidate for high-inductance quantum-circuit applications. Despite continuing efforts in reducing material dimensions to increase the kinetic inductance and the corresponding circuit impedance, it becomes a fundamental challenge to improve further without compromising material qualities. To this end, we propose a method to drastically increase the kinetic inductance of superconducting materials via spinodal decomposition while keeping a low microwave loss. We use epitaxial Ti\textsubscript{0.48}Al\textsubscript{0.52}N as a model system, and for the first time demonstrate the utilization of spinodal decomposition to trigger the insulator-to-superconductor transition with a drastically enhanced material disorder. The measured kinetic inductance has increased by 2-3 orders of magnitude compared with all the best reported disordered superconducting nitrides. Our work paves the way for substantially enhancing and deterministically controlling the inductance for advanced superconducting quantum circuits.

quant-ph↗

arXiv2023

Epitaxial titanium nitride microwave resonators: Structural, chemical, electrical, and microwave properties

Titanium nitride is an attractive material for a range of superconducting quantum-circuit applications owing to its low microwave losses, high surface inductance, and chemical stability. The physical properties and device performance, nevertheless, depend strongly on the quality of the materials. Here we focus on the highly crystalline and epitaxial titanium nitride thin films deposited on sapphire substrates using magnetron sputtering at an intermediate temperature (300$^{\circ}$C). We perform a set of systematic and comprehensive material characterization to thoroughly understand the structural, chemical, and transport properties. Microwave losses at low temperatures are studied using patterned microwave resonators, where the best internal quality factor in the single-photon regime is measured to be $3.3\times 10^6$, and $> 1.0\times 10^7$ in the high-power regime. Adjusted with the material filling factor of the resonators, the microwave loss-tangent here compares well with the previously reported best values for superconducting resonators. This work lays the foundation of using epitaxial titanium nitride for low-loss superconducting quantum circuits.

physics.app-ph↗

arXiv2023

The effects of disorder in superconducting materials on qubit coherence

Introducing disorderness in the superconducting materials has been considered promising to enhance the electromagnetic impedance and realize noise-resilient superconducting qubits. Despite a number of pioneering implementations, the understanding of the correlation between the material disorderness and the qubit coherence is still developing. Here, we demonstrate a systematic characterization of fluxonium qubits with the superinductors made from titanium-aluminum-nitride with varied disorderness. From qubit noise spectroscopy, the flux noise and the dielectric loss are extracted as a measure of the coherence properties. Our results reveal that the $1/f$ flux noise dominates the qubit decoherence around the flux-frustration point, strongly correlated with the material disorderness; while the dielectric loss remains low under a wide range of material properties. From the flux-noise amplitudes, the areal density ($\sigma$) of the phenomenological spin defects and material disorderness are found to be approximately correlated by $\sigma \propto \rho_{xx}^3$, or effectively $(k_F l)^{-3}$. This work has provided new insights on the origin of decoherence channels within superconductors, and could serve as a useful guideline for material design and optimization.

quant-ph↗

arXiv2023

Native approach to controlled-Z gates in inductively coupled fluxonium qubits

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX-interactions. Consequently, effective XX- or XZ-interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ-interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20 ns controlled-Z (CZ) gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

quant-ph↗

arXiv2023

Characterization of loss mechanisms in a fluxonium qubit

Using a fluxonium qubit with in situ tunability of its Josephson energy, we characterize its energy relaxation at different flux biases as well as different Josephson energy values. The relaxation rate at qubit energy values, ranging more than one order of magnitude around the thermal energy $k_B T$, can be quantitatively explained by a combination of dielectric loss and $1/f$ flux noise with a crossover point. The amplitude of the $1/f$ flux noise is consistent with that extracted from the qubit dephasing measurements at the flux sensitive points. In the dielectric loss dominant regime, the loss is consistent with that arises from the electric dipole interaction with two-level-system (TLS) defects. In particular, as increasing Josephson energy thus decreasing qubit frequency at the flux insensitive spot, we find that the qubit exhibits increasingly weaker coupling to TLS defects thus desirable for high-fidelity quantum operations.

quant-ph↗

arXiv2022

FPGA-based electronic system for the control and readout of superconducting quantum processors

Electronic systems for qubit control and measurement serve as a bridge between quantum programming language and quantum information processors. With the rapid development of superconducting quantum circuit (SQC) technology, synchronization in a large-scale system, low-latency execution, and low noise are required for electronic systems. Here, we present a field-programmable gate array (FPGA)-based electronic system with a distributed synchronous clock and trigger architecture. The system supports synchronous control of qubits with jitters of approximately 5 ps. We implement a real-time digital signal processing system in the FPGA, enabling precise timing control, arbitrary waveform generation, IQ demodulation for qubit state discrimination, and the generation of real-time qubit-state-dependent trigger signals for feedback/feedforward control. The hardware and firmware low-latency design reduces the feedback/feedforward latency of the electronic system to 125 ns, significantly less than the decoherence times of the qubit. Finally, we demonstrate the functionalities and low-noise performance of this system using a fluxonium quantum processor.

quant-ph↗

arXiv2022

Quantum Instruction Set Design for Performance

A quantum instruction set is where quantum hardware and software meet. We develop new characterization and compilation techniques for non-Clifford gates to accurately evaluate different quantum instruction set designs. We specifically apply them to our fluxonium processor that supports mainstream instruction $\mathrm{iSWAP}$ by calibrating and characterizing its square root $\mathrm{SQiSW}$. We measure a gate fidelity of up to $99.72\%$ with an average of $99.31\%$ and realize Haar random two-qubit gates using $\mathrm{SQiSW}$ with an average fidelity of $96.38\%$. This is an average error reduction of $41\%$ for the former and a $50\%$ reduction for the latter compared to using $\mathrm{iSWAP}$ on the same processor. This shows designing the quantum instruction set consisting of $\mathrm{SQiSW}$ and single-qubit gates on such platforms leads to a performance boost at almost no cost.

quant-ph↗

arXiv2022

Titanium Nitride Film on Sapphire Substrate with Low Dielectric Loss for Superconducting Qubits

Dielectric loss is one of the major decoherence sources of superconducting qubits. Contemporary high-coherence superconducting qubits are formed by material systems mostly consisting of superconducting films on substrate with low dielectric loss, where the loss mainly originates from the surfaces and interfaces. Among the multiple candidates for material systems, a combination of titanium nitride (TiN) film and sapphire substrate has good potential because of its chemical stability against oxidization, and high quality at interfaces. In this work, we report a TiN film deposited onto sapphire substrate achieving low dielectric loss at the material interface. Through the systematic characterizations of a series of transmon qubits fabricated with identical batches of TiN base layers, but different geometries of qubit shunting capacitors with various participation ratios of the material interface, we quantitatively extract the loss tangent value at the substrate-metal interface smaller than $8.9 \times 10^{-4}$ in 1-nm disordered layer. By optimizing the interface participation ratio of the transmon qubit, we reproducibly achieve qubit lifetimes of up to 300 $μ$s and quality factors approaching 8 million. We demonstrate that TiN film on sapphire substrate is an ideal material system for high-coherence superconducting qubits. Our analyses further suggest that the interface dielectric loss around the Josephson junction part of the circuit could be the dominant limitation of lifetimes for state-of-the-art transmon qubits.

quant-ph↗