arXiv subjects

Cicek Cavdar

Publications and source records attributed to Cicek Cavdar.

At least 37 records · Page 2Linked to original sources

arXiv2026

EARL: Energy-Aware Adaptive Antenna Control with Reinforcement Learning in O-RAN Cell-Free Massive MIMO Networks

Cell-free massive multi-input multi-output (MIMO) promises uniform high performance across the network, but also brings a high energy cost due to joint transmission from distributed radio units (RUs) and centralized processing in the cloud. Leveraging the resource-sharing capabilities of Open Radio Access Network (O-RAN), we propose EARL, an energy-aware adaptive antenna control framework based on reinforcement learning. EARL dynamically configures antenna elements in RUs to minimize radio, optical fronthaul, and cloud processing power consumption while meeting user spectral efficiency demands. Numerical results show power savings of up to 81% and 50% over full-on and heuristic baselines, respectively. The RL-based approach operates within 220 ms, satisfying O-RAN's near-real-time limit, and a greedy refinement further halves power consumption at a 2 s runtime.

cs.IT↗

arXiv2026

Hierarchical Multi-Agent DRL Based Dynamic Cluster Reconfiguration for UAV Mobility Management

Multi-connectivity involves dynamic cluster formation among distributed access points (APs) and coordinated resource allocation from these APs, highlighting the need for efficient mobility management strategies for users with multi-connectivity. In this paper, we propose a novel mobility management scheme for unmanned aerial vehicles (UAVs) that uses dynamic cluster reconfiguration with energy-efficient power allocation in a wireless interference network. Our objective encompasses meeting stringent reliability demands, minimizing joint power consumption, and reducing the frequency of cluster reconfiguration. To achieve these objectives, we propose a hierarchical multi-agent deep reinforcement learning (H-MADRL) framework, specifically tailored for dynamic clustering and power allocation. The edge cloud connected with a set of APs through low latency optical back-haul links hosts the high-level agent responsible for the optimal clustering policy, while low-level agents reside in the APs and are responsible for the power allocation policy. To further improve the learning efficiency, we propose a novel action-observation transition-driven learning algorithm that allows the low-level agents to use the action space from the high-level agent as part of the local observation space. This allows the lower-level agents to share partial information about the clustering policy and allocate the power more efficiently. The simulation results demonstrate that our proposed distributed algorithm achieves comparable performance to the centralized algorithm. Additionally, it offers better scalability, as the decision time for clustering and power allocation increases by only 10% when doubling the number of APs, compared to a 90% increase observed with the centralized approach.

cs.NI↗

arXiv2026

Feasibility Study Regarding Self-sustainable Reconfigurable Intelligent Surfaces

Without requiring operational costs such as cabling and powering while maintaining reconfigurable phase-shift capability, self-sustainable reconfigurable intelligent surfaces (ssRISs) can be deployed in locations inaccessible to conventional relays or base stations, offering a novel approach to enhance wireless coverage. This study assesses the feasibility of ssRIS deployment by analyzing two harvest-and-reflect (HaR) schemes: element-splitting (ES) and time-splitting (TS). We examine how element requirements scale with key system parameters, transmit power, data rate demands, and outage constraints under both line-of-sight (LOS) and non-line-of-sight (NLOS) ssRIS-to-user equipment (UE) channels. Analytical and numerical results reveal distinct feasibility characteristics. The TS scheme demonstrates better channel hardening gain, maintaining stable element requirements across varying outage margins, making it advantageous for indoor deployments with favorable harvesting conditions and moderate data rates. However, TS exhibits an element requirement that exponentially scales to harvesting difficulty and data rate. Conversely, the ES scheme shows only linear growth with harvesting difficulty, providing better feasibility under challenging outdoor scenarios. These findings establish that TS excels in benign environments, prioritizing reliability, while ES is preferable for demanding conditions requiring operational robustness.

cs.IT↗

arXiv2025

Cell-free ISAC for Drone Detection Considering Coverage and Age of Sensing

The growing presence of unauthorized drones poses significant threats to public safety, underscoring the need for aerial surveillance solutions. This work proposes a cell-free integrated sensing and communication (ISAC) framework enabling drone detection within the existing communication network infrastructure, while maintaining communication services. The system exploits the spatial diversity and coordination of distributed access points (APs) in a cell-free massive MIMO architecture to detect aerial passive targets. To evaluate sensing performance, we introduce two key metrics: age of sensing (AoS), capturing the freshness of sensing information, and sensing coverage. The proposed AoS metric includes not only the transmission delays as in the existing models, but also the processing for sensing and networking delay, which are critical in dynamic environments like drone detection. We introduce an ambiguity parameter quantifying the similarity between the target-to-receiver channels for two hotspots and develop a novel network configuration strategy, including hotspot grouping, AP clustering, and sensing pilot assignment, leveraging simultaneous multi-point sensing to minimize AoS. Our results show that the best trade-off between AoS and sensing coverage is achieved when the number of hotspots sharing the same time/frequency resource matches the number of sensing pilots, indicating ambiguity as the primary factor limiting the sensing performance.

cs.IT↗

arXiv2025

Energy-Aware Resource Allocation for Multi-Operator Cell-Free Massive MIMO in V-CRAN Architectures

Cell-free massive multiple-input multiple-output (MIMO) implemented in virtualized cloud radio access networks (V-CRAN) has emerged as a promising architecture to enhance spectral efficiency (SE), network flexibility, and energy efficiency (EE) in next-generation wireless systems. In this work, we develop a holistic optimization framework for the efficient deployment of cell-free massive MIMO in V-CRAN with multiple mobile network operators (MNOs). Specifically, we formulate a set of integer programming models to jointly optimize access point (AP) selection, user equipment (UE) association, cloud resource allocation, and MNO assignment while minimizing the maximum total power consumption (TPC) across MNOs. We consider two different scenarios based on whether UEs can be assigned to arbitrary MNOs or not. The numerical results demonstrate the impact of different deployment assumptions on power consumption, highlighting that flexible UE-MNO assignment significantly reduces TPC. The findings provide key insights into optimizing resource management in cell-free massive MIMO V-CRAN, paving the way for energy-efficient wireless network implementations.

eess.SP↗

arXiv2025

Detecting Multiple Targets with Distributed Sensing and Communication in Cell-Free Massive MIMO

This paper investigates multi-target detection in an integrated sensing and communication (ISAC) system within a cell-free massive MIMO (CF-mMIMO) framework. We adopt a user-centric approach for communication user equipments (UEs) and a distributed sensing approach for multi-target detection. A heuristic access point (AP) mode selection algorithm and a channel-aware distributed sensing scheme are proposed, where local measurements at receive APs (RX-APs) are weighted based on the received signals signal-to-interference ratio (SIR). A maximum a posteriori ratio test (MAPRT) detector is applied under two awareness levels at RX-APs. To balance the communication-sensing trade-off, we develop a power allocation algorithm to jointly maximize the minimum detection probability and communication signal-to-interference-plus-noise ratio (SINR) while satisfying power constraints. The proposed scheme outperforms non-weighted methods. Adding test statistics from more RX-APs can degrade sensing performance due to weaker channels, but this effect can be mitigated by optimizing the weighting exponent. Additionally, assigning more sensing RX-APs to a sensing area results in approximately 10 dB loss in minimum communication SINR due to limited communication resources.

eess.SP↗

arXiv2025

Control Signaling for Reconfigurable Intelligent Surfaces: How Many Bits are Needed?

Reconfigurable intelligent surfaces (RISs) can greatly improve the signal quality of future communication systems by reflecting transmitted signals toward the receiver. However, even when the base station (BS) has perfect channel knowledge and can compute the optimal RIS phase-shift configuration, implementing this configuration requires feedback signaling over a control channel from the BS to the RIS. This feedback must be kept minimal, as it is transmitted wirelessly every time the channel changes. In this paper, we examine how the feedback load, measured in bits, affects the performance of an RIS-aided system. Specifically, we investigate the trade-offs between codebook-based and element-wise feedback schemes, and how these influence the signal-to-noise ratio (SNR). We propose a novel quantization codebook tailored for line-of-sight (LoS) that guarantees a minimal SNR loss using a number of feedback bits that scale logarithmically with the number of RIS elements. We demonstrate the codebook's usefulness over Rician fading channels and how to extend it to handle a non-zero static path. Numerical simulations and analytical analysis are performed to quantify the performance degradation that results from a reduced feedback load, shedding light on how efficiently RIS configurations can be fed back in practical systems.

cs.IT↗

arXiv2025

RIS-Assisted Survivable Fronthaul Design in Cell-Free Massive MIMO System

This paper investigates the application of reconfigurable intelligent surfaces (RISs) to improve fronthaul link survivability in cell-free massive MIMO (CF mMIMO) systems. To enhance the fronthaul survivability, two complementary mechanisms are considered. Firstly, RIS is set to provide reliable line-of-sight (LOS) connectivity and enhance the mmWave backup link. Secondly, a resource-sharing scheme that leverages redundant cable capacity through neighboring master access points (APs) to guarantee availability is considered. We formulate the redundant capacity minimization problem as a RIS-assisted multi-user MIMO rate control optimization problem, developing a novel solution that combines a modified weighted minimum mean square error (WMMSE) algorithm for precoding design with Riemannian gradient descent for RIS phase shift optimization. Our numerical evaluations show that RIS reduces the required redundant capacity by 65.6% compared to the no RIS case to reach a 99% survivability. The results show that the most substantial gains of RIS occur during complete outages of the direct disconnected master AP-CPU channel. These results demonstrate RIS's potential to significantly enhance fronthaul reliability while minimizing infrastructure costs in next-generation wireless networks.

cs.IT↗

arXiv2025

Explainable AI for UAV Mobility Management: A Deep Q-Network Approach for Handover Minimization

The integration of unmanned aerial vehicles (UAVs) into cellular networks presents significant mobility management challenges, primarily due to frequent handovers caused by probabilistic line-of-sight conditions with multiple ground base stations (BSs). To tackle these challenges, reinforcement learning (RL)-based methods, particularly deep Q-networks (DQN), have been employed to optimize handover decisions dynamically. However, a major drawback of these learning-based approaches is their black-box nature, which limits interpretability in the decision-making process. This paper introduces an explainable AI (XAI) framework that incorporates Shapley Additive Explanations (SHAP) to provide deeper insights into how various state parameters influence handover decisions in a DQN-based mobility management system. By quantifying the impact of key features such as reference signal received power (RSRP), reference signal received quality (RSRQ), buffer status, and UAV position, our approach enhances the interpretability and reliability of RL-based handover solutions. To validate and compare our framework, we utilize real-world network performance data collected from UAV flight trials. Simulation results show that our method provides intuitive explanations for policy decisions, effectively bridging the gap between AI-driven models and human decision-makers.

cs.LG↗

arXiv2025

Fair and Energy-Efficient Activation Control Mechanisms for Repeater-Assisted Massive MIMO

Massive multiple-input multiple-output (mMIMO) has been the core of 5G due to its ability to improve spectral efficiency and spatial multiplexing significantly; however, cell-edge users still experience performance degradation due to inter-cell interference and uneven signal distribution. While cell-free mMIMO (cfmMIMO) addresses this issue by providing uniform coverage through distributed antennas, it requires significantly more deployment cost due to the fronthaul and tight synchronization requirements. Alternatively, repeater-assisted massive MIMO (RA-MIMO) has recently been proposed to extend the coverage of cellular mMIMO by densely deploying low-cost single-antenna repeaters capable of amplifying and forwarding signals. In this work, we investigate amplification control for the repeaters for two different goals: (i) providing a fair performance among users, and (ii) reducing the extra energy consumption by the deployed repeaters. We propose a max-min amplification control algorithm using the convex-concave procedure for fairness and a joint sleep mode and amplification control algorithm for energy efficiency, comparing long- and short-term strategies. Numerical results show that RA-MIMO, with maximum amplification, improves signal-to-interference-plus-noise ratio (SINR) by over 20 dB compared to mMIMO and performs within 1 dB of cfmMIMO when deploying the same number of repeaters as access points in cfmMIMO. Additionally, our majority-rule-based long-term sleep mechanism reduces repeater power consumption by 70% while maintaining less than 1% spectral efficiency outage.

eess.SP↗

arXiv2025

UAV-Based Cell-Free Massive MIMO: Joint Placement and Power Optimization under Fronthaul Capacity Limitations

We consider a cell-free massive multiple-input multiple-output (mMIMO) network, where unmanned aerial vehicles (UAVs) equipped with multiple antennas serve as distributed UAV-access points (UAV-APs). These UAV-APs provide seamless coverage by jointly serving user equipments (UEs) with out predefined cell boundaries. However, high-capacity wireless networks face significant challenges due to fronthaul limitations in UAV-assisted architectures. This letter proposes a novel UAV-based cell-free mMIMO framework that leverages distributed UAV-APs to serve UEs while addressing the capacity constraints of wireless fronthaul links. We evaluate functional split Options 7.2 and 8 for the fronthaul links, aiming to maximize the minimum signal-to-interference-plus-noise ratio (SINR) among the UEs and minimize the power consumption by optimizing the transmit powers of UAV-APs and selectively activating them. Our analysis compares sub-6 GHz and millimeter wave (mmWave) bands for the fronthaul, showing that mmWave achieves superior SINR with lower power consumption, particularly under Option 8. Additionally, we determine the minimum fronthaul bandwidth required to activate a single UAV-AP under different split options.

eess.SP↗

arXiv2025

Detecting Unauthorized Drones with Cell-Free Integrated Sensing and Communication

Integrated sensing and communication (ISAC) boosts network efficiency by using existing resources for diverse sensing applications. In this work, we propose a cell-free massive MIMO (multiple-input multiple-output)-ISAC framework to detect unauthorized drones while simultaneously ensuring communication requirements. We develop a detector to identify passive aerial targets by analyzing signals from distributed access points (APs). In addition to the precision of the sensing, timeliness of the sensing information is also crucial due to the risk of drones leaving the area before the sensing procedure is finished. We introduce the age of sensing (AoS) and sensing coverage as our sensing performance metrics and propose a joint sensing blocklength and power optimization algorithm to minimize AoS and maximize sensing coverage while meeting communication requirements. Moreover, we propose an adaptive weight selection algorithm based on concave-convex procedure to balance the inherent trade-off between AoS and sensing coverage. Our numerical results show that increasing the communication requirements would significantly reduce both the sensing coverage and the timeliness of the sensing. Furthermore, the proposed adaptive weight selection algorithm can provide high sensing coverage and reduce the AoS by 45% compared to the fixed weights, demonstrating efficient utilization of both power and sensing blocklength.

cs.IT↗

arXiv2024

Communicate or Sense? AP Mode Selection in mmWave Cell-Free Massive MIMO-ISAC

Integrated sensing and communication (ISAC) is a promising technology for future mobile networks, enabling sensing applications to be performed by existing communication networks, consequently improving the system efficiency. Millimeter wave (mmWave) signals provide high sensing resolution and high data rate but suffer from sensitivity to blockage. Cell-free massive multiple-input multiple-output (MIMO), with a large number of distributed access points (APs), can overcome this challenge by providing macro diversity against changing blockages and can save energy consumption by deactivating unfavorable APs. Thus, in this work, we propose a joint dynamic AP mode selection and power allocation scheme for mmWave cell-free massive MIMO-ISAC, where APs are assigned either as ISAC transmitters, sensing receivers, or shut down. Due to the large size of the original problem, we propose three different sub-optimal algorithms that minimize the number of active APs while guaranteeing the sensing and communication constraints. Numerical results demonstrate that assigning ISAC transmitters only satisfying communication constraints, followed up by sensing receiver assignment only for sensing constraint achieves the best performance-complexity balance.

eess.SP↗

arXiv2024

Energy-Efficient Cell-Free Massive MIMO with Wireless Fronthaul

Cell-free massive MIMO improves the fairness among the user equipments (UEs) in the network by distributing many cooperating access points (APs) around the region while connecting them to a centralized cloud-computing unit that coordinates joint transmission/reception. However, the fiber cable deployment for the fronthaul transport network and activating all available antennas at each AP lead to increased deployment cost and power consumption for fronthaul signaling and processing. To overcome these challenges, in this work, we consider wireless fronthaul connections and propose a joint antenna activation and power allocation algorithm to minimize the end-to-end (from radio to cloud) power while satisfying the quality-of-service requirements of the UEs under wireless fronthaul capacity limitations. The results demonstrate that the proposed methodology of deactivating antennas at each AP reduces the power consumption by 50% and 84% compared to the benchmarks based on shutting down APs and minimizing only the transmit power, respectively.

eess.SP↗

arXiv2024

Multi-Target Integrated Sensing and Communications in Massive MIMO Systems

Integrated sensing and communications (ISAC) allows networks to perform sensing alongside data transmission. While most ISAC studies focus on single-target, multi-user scenarios, multi-target sensing is scarcely researched. This letter examines the monostatic sensing performance of a multi-target massive MIMO system, aiming to minimize the sum of Cramér-Rao lower bounds (CRLBs) for target direction-of-arrival estimates while meeting user equipment (UE) rate requirements. We propose several precoding schemes, comparing sensing performance and complexity, and find that sensing-focused precoding with power allocation for communication achieves near-optimal performance with 20 times less complexity than joint precoding. Additionally, time-sharing between communication and sensing outperforms simple time division, highlighting the benefits of resource-sharing for ISAC.

eess.SP↗

arXiv2024

Fundamentals of Energy-Efficient Wireless Links: Optimal Ratios and Scaling Behaviors

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption model, taking into account the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna. We present a novel algorithm that jointly optimizes these variables to achieve maximum EE, while fulfilling constraints on the variable ranges. We also discover a new relationship between the radiated power and the passive transceiver power consumption. We provide analytical insight into whether using maximum power or bandwidth is optimal and how many antennas a BS should utilize.

cs.IT↗

arXiv2024

Fast Network Recovery from Large-Scale Disasters: A Resilient and Self-Organizing RAN Framework

Extreme natural phenomena are occurring more frequently everyday in the world, challenging, among others, the infrastructure of communication networks. For instance, the devastating earthquakes in Turkiye in early 2023 showcased that, although communications became an imminent priority, existing mobile communication systems fell short with the operational requirements of harsh disaster environments. In this article, we present a novel framework for robust, resilient, adaptive, and open source sixth generation (6G) radio access networks (Open6GRAN) that can provide uninterrupted communication services in the face of natural disasters and other disruptions. Advanced 6G technologies, such as reconfigurable intelligent surfaces (RISs), cell-free multiple-input-multiple-output, and joint communications and sensing with increasingly heterogeneous deployment, consisting of terrestrial and non-terrestrial nodes, are robustly integrated. We advocate that a key enabler to develop service and management orchestration with fast recovery capabilities will rely on an artificial-intelligence-based radio access network (RAN) controller. To support the emergency use case spanning a larger area, the integration of aerial and space segments with the terrestrial network promises a rapid and reliable response in the case of any disaster. A proof-of-concept that rapidly reconfigures an RIS for performance enhancement under an emergency scenario is presented and discussed.

eess.SP↗

arXiv2024

Self-Sustainable Metasurface-Assisted mmWave Indoor Communication System

In the design of a metasurface-assisted system for indoor environments, it is essential to take into account not only the performance gains and coverage extension provided by the metasurface but also the operating costs brought by its reconfigurability, such as powering and cabling. These costs can present challenges, particularly in indoor dense spaces (IDSs). A self-sustainable metasurface (SSM), which retains reconfigurability unlike a static metasurface (SMS), achieves a lower operating cost than a reconfigurable intelligent surface (RIS) by being self-sustainable through power harvesting. In this paper, in order to find a better trade-off between metasurface gain, coverage, and operating cost, the design and performance of an SSM-assisted indoor mmWave communication system are investigated. We first simplify the design of the SSM-assisted system by considering the use of SSMs in a preset-based manner and the formation of coverage groups by associating SSMs with the closest user equipments (UEs). We propose a two-stage iterative algorithm to maximize the minimum data rate in the system by jointly deciding the association between the UEs and the SSMs, the phase-shifts of the SSMs, and allocating time resources for each UE. The non-convexities that exist in the proposed optimization problem are tackled using the feasible point pursuit successive convex approximation method and the concave-convex procedure. To understand the best scenario for using SSM, the resulting performance is compared with that achieved with RIS and SMS. Our numerical results indicate that SSMs are best utilized in a small environment where self-sustainability is easier to achieve when the budget for operating costs is tight.

cs.IT↗