arXiv subjects

Ciro Del Vecchio

Publications and source records attributed to Ciro Del Vecchio.

6 recordsLinked to original sources

arXiv2026

Current status of the High-Resolution Multi-Object Spectrograph (MOS-HR) for the Wide-field Spectroscopic Telescope

The Wide-field Spectroscopic Telescope (WST) is a planned 12-meter class dedicated spectroscopic facility for massive spectroscopic surveys. This paper presents the current status of Work Package 4.5, the High Resolution Multi-Object Spectrograph (HR-MOS) module. We describe the international team organization and optical design resulting from extensive trade-off studies, presenting its evolution driven by scientific requirements and technical constraints. Design parameters derived from science cases and astronomical community requirements are detailed. Given the critical importance of mass and volume budgets, we present envelope dimensions and mass estimates for HR-MOS. The spectrograph constructive parameters are defined, including optical fiber specifications, multiplex capability, and modular architecture. Finally, we present the structural analysis addressing mechanical stability and performance requirements for this high-resolution multi-object spectrograph.

astro-ph.IM↗

arXiv2026

WST, the Wide-field Spectroscopic Telescope: Mechanical Design and FE Analyses for the High Resolution Spectrograph

The Wide-field Spectroscopic Telescope (WST) is a planned 12-meter-class dedicated spectroscopic facility designed to address key scientific challenges through large spectroscopic surveys. This paper presents the current status of Work Package 4.5, which focuses on the High-Resolution Multi-Object Spectrograph (MOS-HR) module for WST. The MOSHR instrument is expected to provide a resolving power of R = 40,000 with a multiplexing capability of about 2,000 targets. The mechanical design activities carried out for the development of the HR spectrograph and for the definition of its optomechanical architecture are described. To account for both the scientific requirements of the spectrograph and the manufacturability constraints associated with such a complex instrument, the mechanical layout has been organized into four larger modules, each containing two sub-modules. Guided by feasibility considerations, such as mechanical performance, available volume, and fabrication and assembly aspects, each sub-module adopts a vertical optical bench configuration with optical elements mounted on both sides. Starting from the baseline optical design, the mechanical configuration has been developed to achieve the required alignment accuracy, structural stability, and environmental robustness. The workflow includes the translation of the optical prescription into a complete mechanical model, the definition of the main mounting and alignment interfaces, and preliminary static, modal, and seismic analyses to evaluate performance under operational and survival loads. As an outcome, the proposed design provides architecture that enables preliminary estimates of mass, volume, cost, and mechanical performance in terms of deformation, stress, and modal behavior of the modules.

astro-ph.IM↗

arXiv2026

WST, the Wide-field Spectroscopic Telescope: Telescope structure FE analyses

The Altitude Structure of the Wide-field Spectroscopic Telescope (WST) is designed to support and position both primary and secondary mirrors, made of structural steel. Due to its dimensions, the Altitude Structure is a substantial part of the WST facility, and its weight, performance, and dynamic behavior play a critical role in the functioning of the Telescope. This paper discusses the iterative process starting from the preliminary structural layout and leading to the optimization of the entire Structure. A Finite Element (FE) model was developed, defining the detailed dimensions and cross sections of each assembly's beams and plates under representative boundary conditions, in order to correctly simulate the operational environment. This model enables accurate estimation of structural weight, mechanical deformations, and stresses, as well as its frequency response for the evaluation of both local and global resonance modes. Based on the initial results obtained using preliminary beam cross sections and shell thickness, several assumptions were formulated to drive the mechanical optimization of the Altitude Structure. The outcome of this work consists of a refined structural configuration and the formulation of the governing design criteria.

astro-ph.IM↗

arXiv2023

Lateral constraint for thin glass shell: analysis of the requirements and conceptual design for a segmented active mirror

The latest high-performance telescopes for deep space observation employ very large primary mirrors that are made of smaller segments, like the JWST which employs monolithic beryllium hexagonal segments. A very promising development stage of these systems is to make them active and to operate on their reflective surfaces to change their shape and compensate for aberrations as well as to perform a very precise alignment. This is possible by employing a reference body that stores actuators to modify the shape of the shell, like in the SPLATT project where voice coil actuators are used. However, the lack of physical contact between the main body and shell places, along with the many advantages related to the physical decoupling of the two bodies, some concerns related to the retaining of the shell under all the possible acceleration conditions affecting the system during the mission lifetime. This paper aims to study the acceleration environment affecting the spacecraft during its lifetime and to use it as a baseline for operational requirements of a retaining system for the shells. Any solution is selected in this paper to leave complete freedom for the development of a constraining system, just some are qualitatively discussed.

astro-ph.IM↗

arXiv2023

Contactless actuators and pyramid wavefront sensor, the SPLATT concept for space active optics: an overview of the project and the last laboratory results

In the last few years the concept of an active space telescope has been greatly developed, to meet demanding requirements with a substantial reduction of tolerances, risks and costs. This is the frame of the LATT project (an ESA TRP) and its follow-up SPLATT (an INAF funded R&D project). Within the SPLATT activities, we outline a novel approach and investigate, both via simulations and in the optical laboratory, two main elements: an active segmented primary with contactless actuators and a pyramid wavefront sensor (PWFS) to drive the correction chain. The key point is the synergy between them: the sensitivity of the PWFS and the intrinsic stability of a contactless-actuated mirror segment. Voice-coil, contactless actuators are in facts a natural decoupling layer between the payload and the optical surface and can suppress the high frequency vibration as we verified in the lab. We subjected a 40 cm diameter prototype with 19 actuators to an externally injected vibration spectrum; we then measured optically the reduction of vibrations when the optical surface is floating controlled by the actuators, thus validating the concept at the first stage of the design. The PWFS, which is largely adopted on ground-based telescope, is a pupil-conjugated sensor and offers a user-selectable sampling and capture range, in order to match different use cases; it is also more sensitive than Shack-Hartmann sensor especially at the low-mid spatial scales. We run a set of numerical simulations with the PWFS measuring the misalignment and phase steps of a JWST-like primary mirrors: we investigated the PWFS sensitivity in the sub-nanometer regime in presence of photon and detector noise, and with guide star magnitudes in the range 8 to 14. In the paper we discuss the outcomes of the project and present a possible roadmap for further developments.

astro-ph.IM↗

arXiv2012

The Actuator Design and the Experimental Tests of a New Technology Large Deformable Mirror for Visible Wavelengths Adaptive Optics

Recently, Adaptive Secondary Mirrors showed excellent on-sky results in the Near Infrared wavelengths. They currently provide 30mm inter-actuator spacing and about 1 kHz bandwidth. Pushing these devices to be operated at visible wavelengths is a challenging task. Compared to the current systems, working in the infrared, the more demanding requirements are the higher spatial resolution and the greater correction bandwidth. In fact, the turbulence scale is shorter and the parameter variation is faster. Typically, the former is not larger than 25 mm (projected on the secondary mirror) and the latter is 2 kHz, therefore the actuator has to be more slender and faster than the current ones. With a soft magnetic composite core, a dual-stator and a single-mover, VRALA, the actuator discussed in this paper, attains unprecedented performances with a negligible thermal impact. Pre-shaping the current required to deliver a given stroke greatly simplifies the control system, whose output supplies the current generator. As the inductance depends on the mover position, the electronics of this generator, provided with an inductance measure circuit, works also as a displacement sensor, supplying the control system with an accurate feed-back signal. A preliminary prototype, built according to the several FEA thermo-magnetic analyses, has undergone some preliminary laboratory tests. The results of these checks, matching the design results in terms of power and force, show that the the magnetic design addresses the severe specifications.

astro-ph.IM↗