arXiv subjects

Cis Lagae

Publications and source records attributed to Cis Lagae.

8 recordsLinked to original sources

arXiv2026

Towards understanding stellar variability at the sub m/s level: granulation-induced variability across the optical spectrum

Detecting the radial velocity signal of Earth-mass exoplanets requires the characterisation and removal of granulation-induced radial velocity variability from spectroscopic observations. By coupling three-dimensional (3D) hydrodynamic (HD) simulations to a radiative transfer code, we can isolate and study the effect of granulation on stellar lines. In this study we isolated the impact of granulation on spectral line shapes and shifts for the largest and most diverse synthetic spectral line sample to date. Our aims were twofold. First, we quantified how granulation affects the temporal evolution of shapes and shifts of 72 unblended spectral lines in two wavelength regions: 5500-5600 {\AA} and 6100-6200 {\AA}, from disc centre to the stellar limb. Second, we investigated if spectral lines behave coherently in their line shape variability. We find that weak lines show the largest radial-velocity variability due to granulation, up to 40 m/s at disc centre and 50 m/s at the stellar limb. On the other hand, strong lines exhibit larger variability in equivalent width than weak lines across the stellar disc. In addition, the equivalent width and line depth of a spectral line are strongly linearly correlated with its radial velocity. While granulation affects all three of these quantities, planetary Doppler shifts only affect radial velocities, opening the door to new granulation-mitigation methods. Lastly, we find that the radial velocity and equivalent width of most spectral lines in our sample evolve coherently in time, with the Fe I and Ca I lines behaving the most similarly. Due to the coherency, line blends will not significantly affect the temporal behaviour of RV and line shape, as induced by granulation. Besides, the coherency between spectral lines offer the opportunity to create disc-integrated spectra of many lines simultaneously, which will be explored in future work.

astro-ph.SR↗

arXiv2026

HRMOS: A High-Resolution Multi-Object Spectrograph for the VLT

This White Paper presents the scientific rationale and instrument concept for HRMOS (High-Resolution Multi-Object Spectrograph), a next-generation instrument proposed for the ESO Very Large Telescope within the VLT 2030 roadmap. Current and planned facilities offer either multi-object spectroscopy or ultra-high spectral resolution, but not both. HRMOS fills this gap by combining very high spectral resolution, multi-object capability, and radial-velocity stability, enabling transformative studies in Galactic and extragalactic astrophysics. The baseline design provides a resolving power of R = 80000, radial-velocity precision of 10 m s-1 (goal: 5 m s-1), simultaneous observations of 50-60 targets, and broad optical coverage down to 385 nm. These capabilities enable precise measurements of elemental abundances, isotopic ratios, line profiles, and radial velocities for large stellar samples, including crowded fields, star clusters, the Galactic bulge, and nearby dwarf galaxies. HRMOS will address key questions on the age of the oldest stellar populations through nucleocosmochronology, the formation and survival of planetary systems, the assembly history of the Milky Way and satellites, the origin of the heaviest elements, stellar evolution, and the chemical and dynamical properties of the interstellar and circumgalactic medium. It will bridge large spectroscopic surveys and the next generation of extremely large telescopes, with strong synergies with 4MOST, Gaia, TESS, PLATO, the proposed Haydn mission, and future ELT instruments. Building on VLT/FLAMES heritage, HRMOS represents a strategic investment for European astronomy in the 2030s.

astro-ph.IM↗

arXiv2026

Synthetic disk-integrated absorption lines isolating stellar granulation for high-precision RV studies

We present a novel method for constructing high-accuracy, time-varying disk-integrated stellar absorption line profiles that isolate the effects of granulation alone. This framework provides an effectively unlimited supply of physically consistent training data, offering a unique opportunity to study granulation-driven velocity variability with no contamination from other stellar processes or instrumental systematics. Our interpolation scheme enables accurate profile generation at arbitrary limb angles and successfully reproduces observed disk integrated solar bisector shapes from IAG spectra. Using four Fe I lines (525.0, 615.2, 617.3, and 627.1 nm), we produce 1000 model star disk-integrated realisations per line and find an isolated granulation-induced RV scatter of 0.16-0.21 m s^-1. Using our synthetic profiles and assuming infinite signal-to-noise, we find strong correlations between various line-shape metrics and convective blueshift, demonstrating that line-shape diagnostics can, in principle, trace granulation effects. Equivalent width proves the strongest diagnostic, achieving up to 60% scatter reduction. However, the strength of all simple line shape diagnostics rapidly diminishes once photon noise is injected. Even when artificially boosting the signal to represent a spectrum containing ~1000 spectral lines, the achievable improvement with these metrics remains below 10% at typical signal-to-noise ratios. Our results highlight the need for more robust, noise-resilient diagnostics and position our synthetic dataset as a valuable testbed for developing and benchmarking such methods.

astro-ph.SR↗

arXiv2025

Resolving star spots on WASP-85 A using high-resolution transit spectroscopy

Stellar surface inhomogeneities such as spots and faculae introduce Doppler variations that challenge exoplanet detection via the radial velocity method. While their impact on disc-integrated spectra is well established, detailed studies of the underlying local line profiles have so far been limited to the Sun. We present an observational campaign targeting the active star WASP-85 A during transits of its hot Jupiter companion. The transits span two stellar rotation periods, allowing us to probe the evolution of active regions. From ground-based photometry we identify seven active regions, six containing dark spots. Using simultaneous ESPRESSO transit spectroscopy, we spatially resolve these regions on the stellar surface by using the planet as a probe. We detect significant bisector shape changes, line broadening, and net redshifts during spot occultations, with velocity shifts of 108-333 m/s (mean uncertainty 50 m/s). The observed broadening is consistent with the Zeeman effect, implying magnetic field strengths (Stokes $I$) $B$ = 2.7-4.4 kG (mean uncertainty 0.6 kG), comparable to solar umbrae. Combined with our photometric spot model, this yields lower limits to the disc-integrated field $Bf = 16 \pm 3$ G and $61 \pm 9$ G for the two hemispheres probed -- at least three times higher than Sun-as-a-star values. We also measure centre-to-limb variations in FWHM, line depth, equivalent width, and convective blueshift, which broadly agree with solar observations and 3D MHD models. This work demonstrates a new way to characterise the surfaces of exoplanet host stars, paving the way for future analyses incorporating synthetic line profiles from 3D MHD simulations.

astro-ph.EP↗

arXiv2025

Coupling 1D stellar evolution with 3D-hydrodynamical simulations on-the-fly III: stellar evolution at different metallicities

A major weakness in one-dimensional (1D) stellar structure and evolution modeling is the simplified treatment of convection, which leads to erroneous near-surface stratification and considerable uncertainties in predicted effective temperatures and luminosities of low-mass stars. In a series of preceding works, a novel method for coupling 1D stellar structural models with a grid of 3D surface convection simulations during stellar evolution was developed, at solar metallicity. This 1D-3D coupling method slightly shifts evolutionary tracks relative to standard calculations, meanwhile providing oscillation frequencies that agree more closely with asteroseismic observations. Here we extend this method to model metal-poor and metal-rich FGK-type stars, by implementing interpolations on-the-fly across metallicity ($\rm -3 < [Fe/H] < 0.5$) for mean 3D models during stellar evolution. We demonstrate quantitatively that the fundamental stellar parameters modeled within our framework are insensitive to the mixing-length parameter. A 20% change in the mixing-length parameter results in evolutionary tracks with a temperature shift of less than 30 K, compared to a difference of over 200 K in standard evolution calculations. Our extension is validated against eclipsing binary systems with extremely precise observational constraints as well as stars in binaries with asteroseismic data. Using a fixed mixing-length parameter that merely governs convective heat transport in the near-adiabatic layers, the 1D-3D coupling method successfully reproduces most observational constraints for all target stars. Coupling 1D stellar evolution models with 3D simulations greatly reduces uncertainties associated with the choice of atmosphere boundary conditions and mixing-length parameters, hence offering a powerful tool for characterizing stars with seismic measurements and determining ages for globular clusters.

astro-ph.SR↗

arXiv2025

Towards understanding stellar variability at the sub m/s level: Isolating granulation signals in synthetic spectral lines

Granulation in the photospheres of FGK-type stars induces variability in absorption lines, complicating exoplanet detection via radial velocities and characterisation via transmission spectroscopy. We aim to quantify the impact of granulation on the radial velocity and bisector asymmetry of stellar absorption lines of varying strengths and at different limb angles. We use 3D radiation-hydrodynamic simulations from MURaM paired with MPS-ATLAS radiative transfer calculations to synthesise time series' for four Fe I lines at different limb angles for a solar-type star. Our line profiles are synthesised at an extremely high resolution (R = 2,000,000), exceeding what is possible observationally and allowing us to capture intricate line shape variations. We introduce a new method of classifying the stellar surface into three components and use this to parameterise the line profiles. Our parameterisation method allows us to disentangle the contributions from p-modes and granulation, providing the unique opportunity to study the effects of granulation without contamination from p-mode effects. We validate our method by comparing radial velocity power spectra of our granulation time series to observations from the LARS spectrograph. We find that we are able to replicate the granulation component extracted from observations of the Fe I 617 nm line at the solar disk centre. We use our granulation-isolated results to show variations in convective blueshift and bisector asymmetry at different limb angles, finding good agreement with empirical results. We show that weaker lines have higher velocity contrast between granules and lanes, resulting in higher granulation-induced velocity fluctuations. Our parameterisation provides a computationally efficient strategy to construct new line profiles, laying the groundwork for future improvements in mitigating stellar noise in exoplanet studies.

astro-ph.SR↗

arXiv2025

3D non-LTE Ca II line formation in metal-poor FGK stars. I. Abundance corrections, radial velocity corrections, and synthetic spectra

The Ca II resonance doublet (HK) and the near-infrared triplet (CaT) are among the strongest features in stellar spectra of FGK-type stars. These spectral lines remain prominent down to extremely low metallicities and are thus useful for providing stellar parameters via ionisation balance and as radial velocity diagnostics. However, the majority of studies that model these lines in late-type stars still rely on one dimensional (1D) hydrostatic model atmospheres and the assumption of local thermodynamic equilibrium (LTE). We present 3D non-LTE radiative transfer calculations of the CaT and HK lines in an extended grid of 3D model atmospheres of metal-poor FGK-type. We investigate the impact of 3D non-LTE effects on abundances, line bisectors and radial velocities. We used a subset of 3D model atmospheres from the recently published STAGGER-grid to synthesize spectra in 3D (non-)LTE. For comparison, similar calculations were performed in 1D (non-)LTE using models from the MARCS grid. Abundance corrections for the CaT lines relative to 1D LTE range from +0.1 to -1.0 dex, with more severe corrections for strong lines in giants. With fixed line strength, the abundance corrections become more negative with increasing effective temperature and decreasing surface gravity. Radial velocity corrections relative to 1D LTE based on cross-correlation of the whole line profile range from -0.2 km/s to +1.5 km/s, with more severe corrections where the CaT lines are strongest. The corrections are even more severe if the line core alone is used to infer the radial velocity. The line strengths and shapes, and consequently the abundance and radial velocity corrections, are strongly affected by the chosen radiative transfer assumption, 1/3D (non)-LTE. We release grids of theoretical spectra that can be used to improve the accuracy of stellar spectroscopic analyses based on the Ca II triplet lines.

astro-ph.SR↗

arXiv2024

An extended and refined grid of 3D STAGGER model atmospheres. Processed snapshots for stellar spectroscopy

Context: Traditional one-dimensional (1D) hydrostatic model atmospheres introduce systematic modelling errors into spectroscopic analyses of FGK-type stars. Aims: We present an updated version of the STAGGER-grid of 3D model atmospheres, and explore the accuracy of post-processing methods in preparation for spectral synthesis. Methods: New and old models were (re)computed following an updated workflow, including an updated opacity binning technique. Spectroscopic tests were performed in 3D LTE for a grid of 216 fictitious Fe I lines, spanning a wide range in oscillator strength, excitation potential and central wavelength, and eight model atmospheres that cover the stellar atmospheric parameter range (Teff, log g, [Fe/H]) of FGK-type stars. Using this grid, the impact of vertical and horizontal resolution, and temporal sampling of model atmospheres on spectroscopic diagnostics was tested. Results: We find that downsampling the horizontal mesh from its original size of 240 x 240 grid cells to 80 x 80 cells, i.e. sampling every third grid cell, introduces minimal errors on the equivalent width and normalized line flux across the line and stellar parameter space. Regarding temporal sampling, we find that sampling ten statistically independent snapshots is sufficient to accurately model the shape of spectral line profiles. For equivalent widths, a subsample consisting of only two snapshots is sufficient, introducing an abundance error of less than 0.015 dex. Conclusions: We have computed 32 new model atmospheres and recomputed 116 old model atmospheres present in the original grid. The public release of the STAGGER-grid contains 243 models, excluding models with [Fe/H] = -4.00, and the processed snapshots can be used to improve the accuracy of spectroscopic analyses.

astro-ph.SR↗