arXiv subjects

Clément Bielinski

Publications and source records attributed to Clément Bielinski.

6 recordsLinked to original sources

arXiv2026

Orientation Dynamics of Rigid Fibers in a Microfluidic Burgers-like Vortex

Fiber suspensions are common in biological and environmental flows and are widely used in industrial applications. Fiber transport and orientation dynamics are affected by interactions with the surrounding fluid and strongly depend on the nature of the flow. The complexity of realistic flows, which are often heterogeneous or time-dependent, hinders a full understanding of fiber dynamics. In this study, we combine microfluidic experiments, theory and numerical simulations to investigate the orientation dynamics of rigid neutrally buoyant fibers in a well-controlled model system, a streamwise stationary vortex at moderate Reynolds number. Despite the three-dimensional nature of the flow, the orientation dynamics are remarkably simple: the fiber orientation is accurately described by Jeffery equations coupled with the Burgers-vortex model over a large range of particle Reynolds number. We show that fibers undergo uniform precession about the vortex axis driven by fluid vorticity while simultaneously aligning with the latter due to strain in the vortex core. These two motions are decoupled, with the alignment timescale determined by the local strain rate and the fiber aspect ratio. Finite particle size and inertia induce weak deviations from the base flow streamlines while leaving the orientational dynamics largely unaffected. These results establish a simple framework for understanding the behavior of elongated particles in stretched vortex flows, which constitute key building blocks of turbulence.

physics.flu-dyn↗

arXiv2024

Dynamics of rigid fibers interacting with triangular obstacles in microchannel flows

Fiber suspensions flowing in structured media are encountered in many biological and industrial systems. Interactions between fibers and the transporting flow as well as fiber contact with obstacles can lead to complex dynamics. In this work, we combine microfluidic experiments and numerical simulations to study the interactions of a rigid fiber with an individual equilateral triangular pillar in a microfluidic channel. Four dominant fiber dynamics are identified: transport above or below the obstacle, pole vaulting and trapping, in excellent agreement between experiments and modeling. The dynamics are classified as a function of the length, angle and lateral position of the fibers at the channel entry. We show that the orientation and lateral position close to the obstacle are responsible for the fiber dynamics and we link those to the initial conditions of the fibers at the channel entrance. Direct contact between the fibers and the pillar is required to obtain strong modification of the fiber trajectories, which is associated to irreversible dynamics. Longer fibers are found to be more laterally shifted by the pillar than shorter fibers that rather tend to remain on their initial streamline. Our findings could in the future be used to design and optimize microfluidic sorting devices to sort rigid fibers by length.

physics.flu-dyn↗

arXiv2021

Unsteady mass transfer from a core-shell cylinder in crossflow

Mass transfer from a composite cylinder - made of an inner core and an outer enveloping semipermeable shell - under channel crossflow is studied numerically using two-dimensional lattice-Boltzmann simulations. The core is initially loaded with a solute that diffuses passively through the shell towards the fluid. The cylinder internal structure and the initial condition considered in this study differ and thus complement the classical studies dealing with homogeneous uncoated cylinders whose surfaces are sustained at either constant concentration or constant mass flux. Here, the cylinder acts as a reservoir endowed with a shell that controls the leakage rate of the encapsulated solute. The transition from steady to unsteady laminar flow regime, around the cylinder, alters the released solute spatial distribution and the mass transfer efficiency, which is characterized by the Sherwood number (the dimensionless mass transfer coefficient). Moreover, the reservoir involves unsteady and continuous boundary conditions, which lead to unsteady and nonuniform distribution of both the concentration and the mass flux at the cylinder surface. The effect of adding a coating shell is highlighted, for a given ratio of the cylinder diameter to the channel width, by extracting a correlation from the computed data set. This new correlation shows explicit dependency of the Sherwood number upon the shell solute permeability (the shell mass transfer coefficient).

physics.flu-dyn↗

arXiv2021

Mass transfer from a sheared spherical rigid capsule

Solute mass transfer from a spherical fluid-filled rigid capsule subjected to shear flow is studied numerically, while considering unsteady, continuous and nonuniform boundary conditions on its surface. Here, the capsule acts as a reservoir with its initially encapsulated solute concentration decaying over time. This scenario differs from the classical case study of either constant concentration or constant mass flux at the surface of the particle. The flow and the concentration field are computed using fully three-dimensional lattice Boltzmann simulations, where the fluid-structure two-way coupling is achieved by the immersed boundary method. Effects of the flow and the boundary conditions on mass transfer efficacy are quantified by the Sherwood number (the dimensionless mass transfer coefficient), which is found to increase due to the combined effects of forced convection and local shear induced by the rotation of the capsule. Having continuity of both the concentration and the mass flux on the capsule significantly decreases the Sherwood number as compared to the case with constant and uniform boundary conditions. All the obtained results can be applied to heat transfer in case of cooling an initially hot spherical particle, for which the concentration must be replaced by the temperature and the Sherwood number by the Nusselt number.

physics.flu-dyn↗

arXiv2021

Numerical method to characterise capsule membrane permeability for controlled drug delivery

Design and characterisation of capsules is not an easy task owing to the multiple involved preparation factors and parameters. Here, a novel method to characterise capsule membrane permeability to solute molecules by an inverse approach is proposed. Transport of chemical species between the capsule core and the surrounding medium through the membrane is described by the Fick's second law with a position-dependent diffusion coefficient. Solutions are computed in spherical coordinates using a finite difference scheme developed for diffusion in multilayer configuration. They are validated using semi-analytical solutions and fully three-dimensional lattice Boltzmann simulations. As a proof of concept, the method is applied to experimental data available in the literature on the kinetics of glucose release and absorption to determine the membrane permeability of capsules. The proposed method is easy to use and determines correctly the permeability of capsule membranes for controlled drug release and absorption applications.

physics.med-ph↗

arXiv2021

Squeezing multiple soft particles into a constriction: transition to clogging

We study numerically how multiple deformable capsules squeeze into a constriction. This situation is largely encountered in microfluidic chips designed to manipulate living cells, which are soft entities. We use fully three-dimensional simulations based on the lattice Boltzmann method to compute the flow of the suspending fluid, and on the immersed boundary method to achieve the two-way fluid-structure interaction. The mechanics of the capsule membrane elasticity is computed with the finite element method. We obtain two main states: continuous passage of the particles, and their blockage that leads to clogging the constriction. The transition from one state to another is dictated by the ratio between the size of the capsules and the constriction width, and by the capsule membrane deformability. This latter is found to enhance particle passage through narrower constrictions, where rigid particles with similar diameter are blocked and lead to clogging.

cond-mat.soft↗