arXiv subjects

Claire Baraduc

Publications and source records attributed to Claire Baraduc.

10 recordsLinked to original sources

arXiv2026

Design optimization of flux concentrators for magnetic tunnel junctions-based sensors

Miniaturized, ultra-sensitive and easily integrable magnetometers are needed for many applications, like space exploration or health monitoring. Achieving this goal requires a magnetic sensor with high sensitivity and low noise. High sensitivity (>1000 %/mT) can be obtained by integrating high gain permalloy flux concentrators (FC). And reducing the magnetic 1/f noise can be realized by increasing the number of magnetic tunnel junctions (MTJs) in the air-gap of the FC. However, this is obtained at the expense of a wider air-gap and consequently a decrease of the magnetic gain and thus of the sensitivity. In this paper, we explore a design optimization scheme in order to find the best trade-off between high FC gain and low magnetic noise. To model the gain of the flux concentrator, we propose two complementary approaches; one is based on finite elements simulations of the FC gain where the influence of geometrical parameters of the air-gap is investigated. Then, in a second step, we propose an analytical formula consistent with all our simulations results and based on magnetic reluctance. Finally, we derive an analytical model of the sensor detectivity from which we can extract the optimal sensor design which allows an improvement by three orders of magnitude of the performances compared to a single junction.

cond-mat.mes-hall↗

arXiv2025

Dzyaloshinskii-Moriya interaction chirality reversal with ferromagnetic thickness

In ultrathin ferromagnetic films sandwiched between two distinct heavy metal layers or between a heavy metal and an oxide layer, the Dzyaloshinskii-Moriya interaction (DMI) is of interfacial origin. Its chirality and strength are determined by the properties of the adjacent heavy metals and the degree of oxidation at the interfaces. Here, we demonstrate that the DMI chirality can change solely with variations in the thickness of the ferromagnetic layer - an effect that has not been experimentally studied in details or explained until now. Our experimental observation in the trilayer system Ta/FeCoB/TaOx is supported by ab initio calculations: they reveal that variations in orbital filling and inter-atomic distances at the interface, driven by the structural relaxations in the ultrathin regime, lead to an inversion of DMI chirality. We hence propose a new degree of freedom to tune DMI chirality and the associated chiral spin textures by tailoring crystal structure e.g. using strain or surface acoustic waves.

cond-mat.mtrl-sci↗

arXiv2023

Control of skyrmion chirality in Ta/FeCoB/TaOx trilayers by TaOx oxidation and FeCoB thickness

Skyrmions are magnetic bubbles with nontrivial topology envisioned as data bits for ultrafast and power-efficient spintronic memory and logic devices. They may be stabilized in heavy-metal/ferromagnetic/oxide trilayer systems. The skyrmion chirality is then determined by the sign of the interfacial Dzyaloshinskii-Moriya interaction (DMI). Nevertheless, for apparently identical systems, there is some controversy about the DMI sign. Here, we show that the degree of oxidation of the top interface and the thickness of the ferromagnetic layer play a major role. Using Brillouin light-scattering measurements in Ta/Fe-Co-B/TaOx trilayers, we demonstrate a sign change of the DMI with the degree of oxidation of the Fe-Co-B/TaOx interface. Using polar magneto-optical Kerr effect microscopy, we consistently observe a reversal of the direction of current-induced motion of skyrmions with the oxidation level of TaOx; this is attributed to their chirality reversal. In addition, a second chirality reversal is observed when changing the Fe-Co-B thickness, probably due to the proximity of the two Fe-Co-B interfaces in the ultrathin case. By properly tuning the chirality of the skyrmion, spin-transfer and spin-orbit torques combine constructively to enhance the skyrmion velocity. These observations thus allow us to envision an optimization of the material parameters to produce highly mobile skyrmions. Moreover, this chirality control enables a versatile manipulation of skyrmions and paves the way towards multidirectional devices.

cond-mat.mtrl-sci↗

arXiv2022

Gate-controlled skyrmion and domain wall chirality

Magnetic skyrmions are localized chiral spin textures, which offer great promise to store and process information at the nanoscale. In the presence of asymmetric exchange interactions, their chirality, which governs their dynamics, is generally considered as an intrinsic parameter set during the sample deposition. In this work, we experimentally demonstrate that a gate voltage can control this key parameter. We probe the chirality of skyrmions and chiral domain walls by observing the direction of their current-induced motion and show that a gate voltage can reverse it. This local and dynamical reversal of the chirality is due to a sign inversion of the interfacial Dzyaloshinskii-Moriya interaction that we attribute to ionic migration of oxygen under gate voltage. Micromagnetic simulations show that the chirality reversal is a continuous transformation, in which the skyrmion is conserved. This control of chirality with 2 - 3 V gate voltage can be used for skyrmion-based logic devices, yielding new functionalities.

cond-mat.mes-hall↗

arXiv2020

Skyrmion Brownian circuit implemented in a continuous ferromagnetic thin film

The fabrication of a skyrmion circuit which stabilizes skyrmions is important to realize micro- to nano-sized skyrmion devices. One example of promising skyrmion-based device is Brownian computers, which have been theoretically proposed, but not realized. It would require a skyrmion circuit in which the skyrmion is stabilized and easily movable. However, the usual skyrmion circuits fabricated by etching of the ferromagnetic film decrease the demagnetization field stabilizing the skyrmions, and thus prevent their formation. In this study, a skyrmion Brownian circuit implemented in a continuous ferromagnetic film with patterned SiO$_2$ capping to stabilize the skyrmion formation. The patterned SiO$_2$ capping controls the saturation field of the ferromagnetic layer and forms a wire-shaped skyrmion potential well, which stabilizes skyrmion formation in the circuit. Moreover, we implement a hub (Y-junction) circuit without pinning sites at the junction by patterned SiO$_2$ capping. This technique enables the efficient control of skyrmion-based memory and logic devices, as well as Brownian computers.

cond-mat.mes-hall↗

arXiv2020

Electric field control of interfacial Dzyaloshinskii-Moriya interaction in Pt/Co/AlO$_x$ thin films

We studied electric field modification of magnetic properties in a Pt/Co/AlO$_x$ trilayer via magneto-optical Kerr microscopy. We observed the spontaneous formation of labyrinthine magnetic domain structure due to thermally activated domain nucleation and propagation under zero applied magnetic field. A variation of the period of the labyrinthine structure under electric field is observed as well as saturation magnetization and magnetic anisotropy variations. Using an analytical formula of the stripe equilibrium width we estimate the variation of the interfacial Dzyaloshinskii-Moriya interaction under electric field as function of the exchange stiffness constant.

cond-mat.mtrl-sci↗

arXiv2019

Mapping different skyrmion phases in double wedges of Ta/FeCoB(tFeCoB)/Ta(tTa)Ox

Skyrmions are chiral magnetic textures that have immense potential for applications in spintronic devices. However, their formation is quite challenging and necessitates a subtle balance of the magnetic interactions at play. Here, we study Ta/FeCoB/TaOx trilayer using crossed double wedges i.e. thickness gradients of FeCoB and of top Ta, which is subsequently oxidized leading to an oxidation gradient. This enabled us to observe micron-sized skyrmions in the vicinity of different transition regions of the sample: from perpendicular magnetic anisotropy to paramagnetic phase and also from perpendicular to in-plane magnetic anisotropy. These observations can be explained by the isolated bubble model taking into account the different energy contributions at play namely anisotropy, exchange, Dzyaloshinskii-Moriya, dipolar and Zeeman. We also qualitatively compare the current-induced motion of skyrmions obtained in different transition regions. Our study not only provides an effective means to form skyrmions by tuning the interfacial magnetic properties but also highlights the differences pertaining to the skyrmions observed in different transition zones, which is extremely crucial for any envisaged application.

cond-mat.mtrl-sci↗

arXiv2018

Creation of Magnetic Skyrmion Bubble Lattices by Ultrafast Laser in Ultrathin Films

Magnetic skyrmions are topologically nontrivial spin textures which hold great promise as stable information carriers in spintronic devices at the nanoscale. One of the major challenges for developing novel skyrmion-based memory and logic devices is fast and controlled creation of magnetic skyrmions at ambient conditions. Here we demonstrate the single ultrafast (35-fs) laser pulse-induced generation of skyrmion bubbles and skyrmion bubble lattices from a ferromagnetic state in sputtered ultrathin magnetic films at room temperature. The skyrmion bubble density increases with the laser fluence in a controlled way, and it finally becomes saturated, forming disordered hexagonal lattices. Moreover, we present that the skyrmion bubble lattice configuration leads to enhanced topological stability as compared to isolated skyrmions, suggesting its promising use in data storage. Our findings shed light on the optical approach to the skyrmion bubble lattice in commonly accessible materials, paving the road toward the emerging skyrmion-based memory and synaptic devices.

cond-mat.mtrl-sci↗

arXiv2018

Large voltage tuning of Dzyaloshinskii-Moriya Interaction: a route towards dynamic control of skyrmion chirality

Electric control of magnetism is a prerequisite for efficient and low power spintronic devices. More specifically, in heavy metal/ ferromagnet/ insulator heterostructures, voltage gating has been shown to locally and dynamically tune magnetic properties like interface anisotropy and saturation magnetization. However, its effect on interfacial Dzyaloshinskii-Moriya Interaction (DMI), which is crucial for the stability of magnetic skyrmions, has been challenging to achieve and has not been reported yet for ultrathin films. Here, we demonstrate 130% variation of DMI with electric field in Ta/FeCoB/TaOx trilayers through Brillouin Light Spectroscopy (BLS). Using polar- Magneto-Optical-Kerr-Effect microscopy, we further show a monotonic variation of DMI and skyrmionic bubble size with electric field, with an unprecedented efficiency. We anticipate through our observations that a sign reversal of DMI with electric field is possible, leading to a chirality switch. This dynamic manipulation of DMI establishes an additional degree of control to engineer programmable skyrmion based memory or logic devices.

cond-mat.mtrl-sci↗

arXiv2012

Diffusive model of current-in-plane-tunneling in double magnetic tunnel junctions

We propose a model that describes current-in-plane tunneling transport in double barrier magnetic tunnel junctions in diffusive regime. Our study shows that specific features appear in double junctions that are described by introducing two typical length scales. The model may be used to measure the magnetoresistance and the resistance area product of both barriers in unpatterned stacks of double barrier magnetic tunnel junctions.

cond-mat.mes-hall↗