Searcharxiv⌕ Search

arXiv subjects

Claire Berger

Publications and source records attributed to Claire Berger.

At least 19 recordsLinked to original sources
arXiv2024

High-quality hexagonal boron nitride selectively grown on patterned epigraphene by MOVPE

Hexagonal boron nitride encapsulation is the method of choice for protecting graphene from environmental doping and impurity scattering. It was previously demonstrated that metal-organic vapor phase epitaxy (MOVPE) grows epitaxially ordered, uniform BN layers on epigraphene (graphene grown on SiC). Due to graphene non-wetting properties, h-BN growth starts preferentially from the graphene ledges. We use this fact here to selectively promote growth of high-quality flat h-BN on epigraphene by patterning epigraphene microstructures prior to BN growth. Thin h-BN films (down to 6 nm) grown by MOVPE show smooth and pleated surface morphology on epigraphene, while crumpled BN is observed on the SiC. Cross-sectional high-resolution transmission electron microscopy images and fluorescence imaging confirm the higher BN quality grown on the epigraphene. Transport measurements reveal p-doping as expected from hydrogen intercalation of epigraphene and regions of high and low mobility. This method can be used to produce structurally uniform high-quality h-BN/epigraphene micro/nano scale heterostructure.

cond-mat.mtrl-sci↗
arXiv2022

An epitaxial graphene platform for zero-energy edge state nanoelectronics

Graphene's original promise to succeed silicon faltered due to pervasive edge disorder in lithographically patterned deposited graphene and the lack of a new electronics paradigm. Here we demonstrate that the annealed edges in conventionally patterned graphene epitaxially grown on a silicon carbide substrate (epigraphene) are stabilized by the substrate and support a protected edge state. The edge state has a mean free path that is greater than 50 microns, 5000 times greater that the bulk states and involves a theoretically unexpected Majorana-like zero-energy non-degenerate quasiparticle that does not produce a Hall voltage. In seamless integrated structures, the edge state forms a zero-energy one-dimensional ballistic network with essentially dissipationless nodes at ribbon-ribbon junctions. Seamless device structures offer a variety of switching possibilities including quantum coherent devices at low temperatures. This makes epigraphene a technologically viable graphene nanoelectronics platform that has the potential to succeed silicon nanoelectronics.

cond-mat.mes-hall↗
arXiv2020

Highly Ordered Boron Nitride/Epigraphene Epitaxial Films on Silicon Carbide by Lateral Epitaxial Deposition

Realizing high-performance nanoelectronics requires control of materials at the nanoscale. Methods to produce high quality epitaxial graphene (EG) nanostructures on silicon carbide are known. The next step is to grow Van der Waals semiconductors on top of EG nanostructures. Hexagonal boron nitride (h-BN) is a wide bandgap semiconductor with a honeycomb lattice structure that matches that of graphene, making it ideally suited for graphene-based nanoelectronics. Here, we describe the preparation and characterization of multilayer h-BN grown epitaxially on EG using a migration-enhanced metalorganic vapor phase epitaxy process. As a result of the lateral epitaxial deposition (LED) mechanism, the grown h-BN/EG heterostructures have highly ordered epitaxial interfaces, as desired in order to preserve the transport properties of pristine graphene. Atomic scale structural and energetic details of the observed row-by-row, growth mechanism of the 2D epitaxial h-BN film are analyzed through first-principles simulations, demonstrating one-dimensional nucleation-free-energy-barrierless growth. This industrially relevant LED process can be applied to a wide variety of van der Waals materials.

cond-mat.mtrl-sci↗
arXiv2020

Flat and safe under the graphene sheet

Large-scale atomically thin metals can be stabilized through confinement epitaxy at graphene / SiC interface, which exhibit a gradient bonding type and are air stable, providing a compelling platform for quantum and optoelectronic technologies.

cond-mat.mes-hall↗
arXiv2019

Layer dependence of graphene-diamene phase transition in epitaxial and exfoliated few-layer graphene using machine learning

The study of the nanomechanics of graphene $-$ and other 2D materials $-$ has led to the discovery of exciting new properties in 2D crystals, such as their remarkable in-plane stiffness and out of plane flexibility, as well as their unique frictional and wear properties at the nanoscale. Recently, nanomechanics of graphene has generated renovated interest for new findings on the pressure-induced chemical transformation of a few-layer thick epitaxial graphene into a new ultra-hard carbon phase, named diamene. In this work, by means of a machine learning technique, we provide a fast and efficient tool for identification of graphene domains (areas with a defined number of layers) in epitaxial and exfoliated films, by combining data from Atomic Force Microscopy (AFM) topography and friction force microscopy (FFM). Through the analysis of the number of graphene layers and detailed Å-indentation experiments, we demonstrate that the formation of ultra-stiff diamene is exclusively found in 1-layer plus buffer layer epitaxial graphene on silicon carbide (SiC) and that an ultra-stiff phase is not observed in neither thicker epitaxial graphene (2-layer or more) nor exfoliated graphene films of any thickness on silicon oxide (SiO$_{2}$).

cond-mat.mtrl-sci↗
arXiv2018

Symmetry-breaking supercollisions in Landau-quantized graphene

Recent pump-probe experiments performed on graphene in a perpendicular magnetic field have revealed carrier relaxation times ranging from picoseconds to nanoseconds depending on the quality of the sample. To explain this surprising behavior, we propose a novel symmetry-breaking defect-assisted relaxation channel. This enables scattering of electrons with single out-of-plane phonons, which drastically accelerate the carrier scattering time in low-quality samples. The gained insights provide a strategy for tuning the carrier relaxation time in graphene and related materials by orders of magnitude.

cond-mat.mtrl-sci↗
arXiv2018

Ultrahard carbon film from epitaxial two-layer graphene

Atomically thin graphene exhibits fascinating mechanical properties, although its hardness and transverse stiffness are inferior to those of diamond. To date, there hasn't been any practical demonstration of the transformation of multi-layer graphene into diamond-like ultra-hard structures. Here we show that at room temperature and after nano-indentation, two-layer graphene on SiC(0001) exhibits a transverse stiffness and hardness comparable to diamond, resisting to perforation with a diamond indenter, and showing a reversible drop in electrical conductivity upon indentation. Density functional theory calculations suggest that upon compression, the two-layer graphene film transforms into a diamond-like film, producing both elastic deformations and sp2-to-sp3 chemical changes. Experiments and calculations show that this reversible phase change is not observed for a single buffer layer on SiC or graphene films thicker than 3 to 5 layers. Indeed, calculations show that whereas in two-layer graphene layer-stacking configuration controls the conformation of the diamond-like film, in a multilayer film it hinders the phase transformation.

cond-mat.mtrl-sci↗
arXiv2016

Epitaxial graphene on SiC: 2D sheets, selective growth and nanoribbons

Epitaxial graphene grown on SiC by the confinement controlled sublimation method is reviewed, with an emphasis on multilayer and monolayer epitaxial graphene on the carbon face of 4H-SiC and on directed and selectively grown structures under growth-arresting or growth-enhancing masks. Recent developments in the growth of templated graphene nanostructures are also presented, as exemplified by tens of micron long very well confined and isolated 20-40nm wide graphene ribbons. Scheme for large scale integration of ribbon arrays with Si wafer is also presented.

cond-mat.mes-hall↗
arXiv2016

Electronic Cooling via Interlayer Coulomb Coupling in Multilayer Epitaxial Graphene

In van der Waals bonded or rotationally disordered multilayer stacks of two-dimensional (2D) materials, the electronic states remain tightly confined within individual 2D layers. As a result, electron-phonon interactions occur primarily within layers and interlayer electrical conductivities are low. In addition, strong covalent in-plane intralayer bonding combined with weak van der Waals interlayer bonding results in weak phonon-mediated thermal coupling between the layers. We demonstrate here, however, that Coulomb interactions between electrons in different layers of multilayer epitaxial graphene provide an important mechanism for interlayer thermal transport even though all electronic states are strongly confined within individual 2D layers. This effect is manifested in the relaxation dynamics of hot carriers in ultrafast time-resolved terahertz spectroscopy. We develop a theory of interlayer Coulomb coupling containing no free parameters that accounts for the experimentally observed trends in hot-carrier dynamics as temperature and the number of layers is varied.

cond-mat.mes-hall↗
arXiv2015

Nano selective area growth of GaN by MOVPE on 4H-SiC using epitaxial graphene as a mask: towards integrated III-nitride / graphene / SiC electronics and optoelectronics

We report the growth of high-quality triangular GaN nanomesas, 30-nm thick, on the C-face of 4H-SiC using nano selective area growth (NSAG) with patterned epitaxial graphene grown on SiC as an embedded mask. NSAG alleviates the problems of defective crystals in the heteroepitaxial growth of nitrides, and the high mobility graphene film can readily provide the back low-dissipative electrode in GaN-based optoelectronic devices. The process consists in first growing a 5-8 graphene layers film on the C-face of 4H- SiC by confinement-controlled sublimation of silicon carbide. The graphene film is then patterned and arrays of 75-nanometer-wide openings are etched in graphene revealing the SiC substrate. 30-nanometer-thick GaN is subsequently grown by metal organic vapor phase epitaxy. GaN nanomesas grow epitaxially with perfect selectivity on SiC, in openings patterned through graphene, with no nucleation on graphene. The up-or-down orientation of the mesas on SiC, their triangular faceting, and cross-sectional scanning transmission electron microscopy show that they are biphasic. The core is a zinc blende monocrystal surrounded with single-crystal hexagonal wurtzite. The GaN crystalline nanomesas have no threading dislocations, and do not show any V-pit. This NSAG process potentially leads to integration of high-quality III-nitrides on the wafer scalable epitaxial graphene / silicon carbide platform.

cond-mat.mtrl-sci↗
arXiv2015

SU(4) symmetry breaking revealed by magneto-optical spectroscopy in epitaxial graphene

Refined infrared magnetotransmission experiments have been performed in magnetic fields B up to 35 T on a series of multilayer epitaxial graphene samples. Following the main optical transition involving the n=0 Landau level (LL), we observe a new absorption transition increasing in intensity with magnetic fields B>26 T. Our analysis shows that this is a signature of the breaking of the SU(4) symmetry of the n=0 LL. Using a quantitative model, we show that the only symmetry-breaking scheme consistent with our experiments is a charge density wave (CDW).

cond-mat.str-el↗
arXiv2015

The question of intrinsic origin of the metal-insulator transition in i-AlPdRe quasicrystal

The icosahedral (i-) AlPdRe is the most resistive quasicrystalline alloy discovered so far. Resistivities ($ρ$) of $1Ωcm$ at 4K and correlated resistance ratios ($RRR = ρ_{4K}/ρ_{300K}$) of more than 200 are observed in polycrystalline samples. These values are two orders of magnitude larger than for the isomorphous i-AlPdMn phase. We discuss here the controversial microscopic origin of the i-AlPdRe alloy electrical specificity. It has been proposed that the high resistivity values are due to extrinsic parameters, such as secondary phases or oxygen contamination. From comprehensive measurements and data from the literature including electronic transport correlated with micro structural and micro chemical analysis, we show that on the contrary there is mounting evidence in support of an origin intrinsic to the i-phase. Similarly to the other quasicrystalline alloys, the electrical resistivity of the i-AlPdRe samples depends critically on minute changes in the structural quality and chemical composition. The low resistivity in i-AlPdRe single-grains compared to polycrystaline samples can be explained by difference in chemical composition, heterogeneity and thermal treatment.

cond-mat.mtrl-sci↗
arXiv2014

Scalable control of graphene growth on 4H-SiC C-face using decomposing silicon nitride masks

Patterning of graphene is key for device fabrication. We report a way to increase or reduce the number of layers in epitaxial graphene grown on the C-face (000-1) of silicon carbide by the deposition of a 120 nm to 150nm-thick silicon nitride (SiN) mask prior to graphitization. In this process we find that areas covered by a Si-rich SiN mask have one to four more layers than non-masked areas. Conversely N-rich SiN decreases the thickness by three layers. In both cases the mask decomposes before graphitization is completed. Graphene grown in masked areas show good quality as observed by Raman spectroscopy, atomic force microscopy (AFM) and transport data. By tailoring the growth parameters selective graphene growth and sub-micron patterns have been obtained.

cond-mat.mtrl-sci↗
arXiv2014

Controlled epitaxial graphene growth within amorphous carbon corrals

Structured growth of high quality graphene is necessary for technological development of carbon based electronics. Specifically, control of the bunching and placement of surface steps under epitaxial graphene on SiC is an important consideration for graphene device production. We demonstrate lithographically patterned evaporated amorphous carbon corrals as a method to pin SiC surface steps. Evaporated amorphous carbon is an ideal step-flow barrier on SiC due to its chemical compatibility with graphene growth and its structural stability at high temperatures, as well as its patternability. The amorphous carbon is deposited in vacuum on SiC prior to graphene growth. In the graphene furnace at temperatures above 1200$^\circ$C, mobile SiC steps accumulate at these amorphous carbon barriers, forming an aligned step free region for graphene growth at temperatures above 1330$^\circ$C. AFM imaging and Raman spectroscopy support the formation of quality step-free graphene sheets grown on SiC with the step morphology aligned to the carbon grid.

cond-mat.mes-hall↗
arXiv2013

Anisotropy of excitation and relaxation of photogenerated Dirac electrons in graphene

We investigate the polarization dependence of the carrier excitation and relaxation in epitaxial multilayer graphene. Degenerate pump-probe experiments with a temporal resolution of 30 fs are performed for different rotation angles of the pump-pulse polarization with respect to the polarization of the probe pulse. A pronounced dependence of the pump-induced transmission on this angle is found. It reflects a strong anisotropy of the pump-induced occupation of photogenerated carriers in momentum space even though the band structure is isotropic. Within 150 fs after excitation an isotropic carrier distribution is established. Our observations imply the predominant role of collinear scattering preserving the initially optically generated anisotropy in the carrier distribution. The experiments are well described by microscopic time-, momentum, and angle-resolved modelling, which allows us to unambiguously identify non-collinear carrier-phonon scattering to be the main relaxation mechanism giving rise to an isotropic distribution in the first hundred fs after optical excitation.

cond-mat.mes-hall↗
arXiv2013

Exceptional ballistic transport in epitaxial graphene nanoribbons

Graphene electronics has motivated much of graphene science for the past decade. A primary goal was to develop high mobility semiconducting graphene with a band gap that is large enough for high performance applications. Graphene ribbons were thought to be semiconductors with these properties, however efforts to produce ribbons with useful bandgaps and high mobility has had limited success. We show here that high quality epitaxial graphene nanoribbons 40 nm in width, with annealed edges, grown on sidewall SiC are not semiconductors, but single channel room temperature ballistic conductors for lengths up to at least 16 micrometers. Mobilities exceeding one million corresponding to a sheet resistance below 1 Ohm have been observed, thereby surpassing two dimensional graphene by 3 orders of magnitude and theoretical predictions for perfect graphene by more than a factor of 10. The graphene ribbons behave as electronic waveguides or quantum dots. We show that transport in these ribbons is dominated by two components of the ground state transverse waveguide mode, one that is ballistic and temperature independent, and a second thermally activated component that appears to be ballistic at room temperature and insulating at cryogenic temperatures. At room temperature the resistance of both components abruptly increases with increasing length, one at a length of 160 nm and the other at 16 micrometers. These properties appear to be related to the lowest energy quantum states in the charge neutral ribbons. Since epitaxial graphene nanoribbons are readily produced by the thousands, their room temperature ballistic transport properties can be used in advanced nanoelectronics as well.

cond-mat.mes-hall↗
arXiv2013

Probing terahertz surface plasmon waves in graphene structures

Epitaxial graphene mesas and ribbons are investigated using terahertz (THz) nearfield microscopy to probe surface plasmon excitation and THz transmission properties on the sub-wavelength scale. The THz near-field images show variation of graphene properties on a scale smaller than the wavelength, and excitation of THz surface waves occurring at graphene edges, similar to that observed at metallic edges. The Fresnel reflection at the substrate SiC/air interface is also found to be altered by the presence of graphene ribbon arrays, leading to either reduced or enhanced transmission of the THz wave depending on the wave polarization and the ribbon width.

cond-mat.mes-hall↗