arXiv subjects

Clare P. Grey

Publications and source records attributed to Clare P. Grey.

At least 19 recordsLinked to original sources

arXiv2026

Revisiting Jahn--Teller Transitions in Correlated Oxides with Monte Carlo Modeling

Jahn--Teller (JT) distortions are a key driver of physical properties in many correlated oxide materials. Cooperative JT distortions, in which long-range orbital order reduces the symmetry of the average structure macroscopically, are common in JT-distorted materials at low temperatures. This long-range order will often melt on heating, \textit{via} a transition to a high-temperature state without long-range orbital order. The nature of this transition has been observed to vary with different materials depending on crystal structure; in LaMnO$_3$ the transition has generally been interpreted as order-disorder, whereas in layered nickelates $A$NiO$_2$ ($A$=Li,Na) there is a displacive transition. Alternatively, recent theoretical work has suggested that previous attributions of order-disorder may in fact be a consequence of phonon anharmonicity, rather than persistence of JT distortions, which would suggest that the displacive transition may be more common than currently believed. In this work, we run Monte Carlo simulations with a simple Hamiltonian which is modified to include terms dependent on the JT amplitude $\rho$, which is allowed to vary within the simulation \textit{via} the Metropolis algorithm. Our simulations yield distributions of JT amplitudes consistent with displacive rather than order-disorder behaviour for both perovskites and layered nickelates, suggesting that displacive-like JT transitions may be more common than previously assumed in both perovskites and layered nickelates. We also find significant differences between the transition observed for perovskites compared with layered nickelates, which we attribute to differing extensivity of configurational entropy on the two lattices, showing the crucial role of lattice geometry in determining behaviour.

cond-mat.str-el↗

arXiv2025

Avalanche-like lithium intercalation and intraparticle correlations in graphite

Graphite is the most widely used anode material in lithium-ion batteries with over 98% market share. However, despite its first application over 30 years ago, the lithium insertion processes and associated dynamics in graphite remain poorly understood, especially for the dilute stages. A fundamental understanding of how the symmetry-breaking phase transitions occur pseudo-continuously under operating conditions is still lacking. Here, we provide a unified picture of ion intercalation dynamics during the dilute stages of graphite intercalation, using operando optical microscopy combined with random field Ising modelling. We show that during the dilute stages, single graphite particle undergoes rapid, localised avalanche-like (de)intercalation, leading to micron-sized regions (de)intercalating within seconds. These avalanches are reminiscent of phase transition behaviour seen in disordered materials such as martensitic transformations, Barkhausen noise and ferroelectric/elastic materials - associated with step changes in the order parameter, where the system changes from one phase to another under an applied driving force by jumping from one metastable state to another. Here, using a modified random field Ising model, we relate these avalanches to static disorder in graphite, which disrupts ion filling dynamics, leading to pseudo-continuous transitions between stages, accounting for the experimental electrochemistry profile as well as the temperature dependent avalanche dynamics. Finally, we develop a methodology to spatio-temporally analyse avalanches between intraparticle regions, revealing spatially heterogeneous connectivity and temporal patterns between regions during the dilute stages. Our work highlights the role of local and static disorder in eliciting unexpected phase transition behaviour, and provides new tools and concepts for studying layered battery materials.

cond-mat.mtrl-sci↗

arXiv2025

A foundation model for atomistic materials chemistry

Atomistic simulations of matter, especially those that leverage first-principles (ab initio) electronic structure theory, provide a microscopic view of the world, underpinning much of our understanding of chemistry and materials science. Over the last decade or so, machine-learned force fields have transformed atomistic modeling by enabling simulations of ab initio quality over unprecedented time and length scales. However, early ML force fields have largely been limited by: (i) the substantial computational and human effort of developing and validating potentials for each particular system of interest; and (ii) a general lack of transferability from one chemical system to the next. Here we show that it is possible to create a general-purpose atomistic ML model, trained on a public dataset of moderate size, that is capable of running stable molecular dynamics for a wide range of molecules and materials. We demonstrate the power of the MACE-MP-0 model - and its qualitative and at times quantitative accuracy - on a diverse set of problems in the physical sciences, including properties of solids, liquids, gases, chemical reactions, interfaces and even the dynamics of a small protein. The model can be applied out of the box as a starting or "foundation" model for any atomistic system of interest and, when desired, can be fine-tuned on just a handful of application-specific data points to reach ab initio accuracy. Establishing that a stable force-field model can cover almost all materials changes atomistic modeling in a fundamental way: experienced users get reliable results much faster, and beginners face a lower barrier to entry. Foundation models thus represent a step towards democratising the revolution in atomic-scale modeling that has been brought about by ML force fields.

physics.chem-ph↗

arXiv2025

Dome-like pressure-temperature phase diagram of the cooperative Jahn--Teller distortion in NaNiO$_2$

NaNiO$_2$ is a Ni$^{3+}$-containing layered material consisting of alternating triangular networks of Ni and Na cations, separated by octahedrally-coordinated O anions. At ambient pressure, it features a collinear Jahn--Teller distortion below $T^\mathrm{JT}_\mathrm{onset}\approx480$ K, which disappears in a first-order transition on heating to $T^\mathrm{JT}_\mathrm{end}\approx500$ K, corresponding to the increase in symmetry from monoclinic to rhombohedral. It was previously studied by variable-pressure neutron diffraction [ACS Inorganic Chemistry 61.10 (2022): 4312-4321] and found to exhibit an increasing $T^\mathrm{JT}_\mathrm{onset}$ with pressure up to ~5 GPa. In this work, powdered NaNiO$_2$ was studied via variable-pressure synchrotron x-ray diffraction up to pressures of ~67 GPa at 294 K and 403 K. Suppression of the collinear Jahn--Teller ordering is observed via the emergence of a high-symmetry rhombohedral phase, with the onset pressure occurring at ~18 GPa at both studied temperatures. Further, a discontinuous decrease in unit cell volume is observed on transitioning from the monoclinic to the rhombohedral phase. These results taken together suggest that in the vicinity of the transition, application of pressure causes the Jahn--Teller transition temperature, $T^\mathrm{JT}_\mathrm{onset}$, to decrease rapidly. We conclude that the pressure-temperature phase diagram of the cooperative Jahn--Teller distortion in NaNiO$_2$ is dome-like.

cond-mat.mtrl-sci↗

arXiv2024

Displacive Jahn--Teller transition in NaNiO$_2$

Below its Jahn--Teller transition temperature, $T_\mathrm{JT}$, NaNiO$_2$ has a monoclinic layered structure consisting of alternating layers of edge-sharing NaO$_6$ and Jahn-Teller-distorted NiO$_6$ octahedra. Above $T_\mathrm{JT}$ where NaNiO$_2$ is rhombohedral, diffraction measurements show the absence of a cooperative Jahn-Teller distortion, accompanied by an increase in the unit cell volume. Using neutron total scattering, solid-state Nuclear Magnetic Resonance (NMR), and extended X-ray absorption fine structure (EXAFS) experiments as local probes of the structure we find direct evidence for a displacive, as opposed to order-disorder Jahn-Teller transition at $T_\mathrm{JT}$. This is supported by \textit{ab initio} molecular dynamics (AIMD) simulations. To our knowledge this study is the first to show a displacive Jahn-Teller transition in any material using direct observations with local probe techniques.

cond-mat.mtrl-sci↗

arXiv2024

Transferability of datasets between Machine-Learning Interaction Potentials

With the emergence of Foundational Machine Learning Interatomic Potential (FMLIP) models trained on extensive datasets, transferring data between different ML architectures has become increasingly important. In this work, we examine the extent to which training data optimised for one machine-learning forcefield algorithm may be re-used to train different models, aiming to accelerate FMLIP fine-tuning and to reduce the need for costly iterative training. As a test case, we train models of an organic liquid mixture that is commonly used as a solvent in rechargeable battery electrolytes, making it an important target for reactive MLIP development. We assess model performance by analysing the properties of molecular dynamics trajectories, showing that this is a more stringent test than comparing prediction errors for fixed datasets. We consider several types of training data, and several popular MLIPs - notably the recent MACE architecture, a message-passing neural network designed for high efficiency and smoothness. We demonstrate that simple training sets constructed without any ab initio dynamics are sufficient to produce stable models of molecular liquids. For simple neural-network architectures, further iterative training is required to capture thermodynamic and kinetic properties correctly, but MACE performs well with extremely limited datsets. We find that configurations designed by human intuition to correct systematic model deficiencies transfer effectively between algorithms, but active-learned data that are generated by one MLIP do not typically benefit a different algorithm. Finally, we show that any training data which improve model performance also improve its ability to generalise to similar unseen molecules. This suggests that trajectory failure modes are connected with chemical structure rather than being entirely system-specific.

physics.chem-ph↗

arXiv2023

Li iontronics in single-crystalline T-Nb2O5 thin films with vertical ionic transport channels

The niobium oxide polymorph T-Nb2O5 has been extensively investigated in its bulk form especially for applications in fast-charging batteries and electrochemical (pseudo)capacitors. Its crystal structure that has two-dimensional (2D) layers with very low steric hindrance allows for fast Li-ion migration. However, since its discovery in 1941, the growth of single-crystalline thin films and its electronic applications have not yet been realized, likely due to its large orthorhombic unit cell along with the existence of many polymorphs. Here we demonstrate the epitaxial growth of single-crystalline T-Nb2O5 thin films, critically with the ionic transport channels oriented perpendicular to the film's surface. These vertical 2D channels enable fast Li-ion migration which we show gives rise to a colossal insulator-metal transition where the resistivity drops by eleven orders of magnitude due to the population of the initially empty Nb 4d0 states by electrons. Moreover, we reveal multiple unexplored phase transitions with distinct crystal and electronic structures over a wide range of Li-ion concentrations by comprehensive in situ experiments and theoretical calculations, that allow for the reversible and repeatable manipulation of these phases and their distinct electronic properties. This work paves the way to the exploration of novel thin films with ionic channels and their potential applications.

cond-mat.mtrl-sci↗

arXiv2023

The importance of electronic correlations in exploring the exotic phase diagram of layered Li$_x$MnO$_2$

Using ab initio dynamical mean-field theory we explore the electronic and magnetic states of layered Li$_x$MnO$_2$ as a function of $x$, the state of charge. Constructing real-space Wannier projections of Kohn-Sham orbitals based on the low-energy subspace of Mn $3d$ states and solving a multi-impurity problem, our approach focuses on local correlations at Mn sites. The antiferromagnetic insulating state in LiMnO$_2$ has a moderate Néel temperature of $T_N=296\,K$ in agreement with experimental studies. Upon delithiation the system proceeds through a number of states: ferrimagnetic correlated metals at $x$=0.92, 0.83; multiple charge disproportionated ferromagnetic correlated metals with large quasiparticle weights at $x$=0.67, 0.50, 0.33; ferromagnetic metals with small quasiparticle weights at $x$=0.17, 0.08 and an antiferromagnetic insulator for the fully delithiated state, $x=0.0$. At moderate states of charge, $x=0.67-0.33$, a mix of +3/+4 formal oxidation states of Mn is observed, while the overall nominal oxidation of Mn state changes from +3 in LiMnO$_2$ to +4 in MnO$_2$. In all these cases the high-spin state emerges as the most likely state in our calculations considering the full $d$~manifold of Mn based on the proximity of $e_g$ levels in energy to $t_{2g}$. The quasiparticle peaks in the correlated metallic states were attributed to polaronic states based on previous literature for similar isoelectronic JT driven materials, arising due to non-Fermi liquid type behaviour of the strongly correlated system.

cond-mat.str-el↗

arXiv2023

Binder-free CNT cathodes for Li-O$_2$ batteries with more than one life

Li-O$_2$ batteries (LOB) performance degradation ultimately occurs through the accumulation of discharge products and irreversible clogging of the porous electrode during the cycling. Electrode binder degradation in the presence of reduced oxygen species can result in additional coating of the conductive surface, exacerbating capacity fading. Herein, we establish a facile method to fabricate free-standing, binder-free electrodes for LOBs in which multi-wall carbon nanotubes (MWCNT) form cross-linked networks exhibiting high porosity, conductivity, and flexibility. These electrodes demonstrate high reproducibility upon cycling in LOBs. After cell death, efficient and inexpensive methods to wash away the accumulated discharge products are demonstrated, as reconditioning method. The second life usage of these electrodes is validated, without noticeable loss of performance. These findings aim to assist in the development of greener high energy density batteries while reducing manufacturing and recycling costs.

cond-mat.mtrl-sci↗

arXiv2022

Incommensurate magnetic modulation in K-rich cryptomelane, K$_x$Mn$_8$O$_{16}$ ($x\approx1.45$)

Cryptomelane is a hollandite-like material consisting of K$^+$ cations in an $\alpha$-MnO$_2$ tunnel-like crystallographic motif. A sample with stoichiometry K$_{1.448(3)}$Mn$_8$O$_{16}$ has been synthesised and its magnetic properties investigated using variable-temperature magnetic susceptibility, heat capacity, and neutron powder diffraction. Three distinct transitions at $T_1=184$\,K, $T_2=54.5$\,K, and $T_3=24$\,K are observed. At $T_1$ there is a subtle tetragonal$\rightarrow$monoclinic transition associated with Mn$^{3+}$/Mn$^{4+}$ ordering, and a set of non-magnetic superstructure peaks emerge; these could not be indexed definitively and are indicative of an ordering that is incommensurate with the unit cell. Magnetic Bragg peaks emerge below $T_2=54.5$\,K, and their positions indicate an incommensurate modulated magnetic structure. The model consistent with the data is a dual-$\vec{k}_\mathrm{mag}$ structure with a ferromagnetic $|\vec{k}_\mathrm{mag}|=0$ component and an incommensurate $\vec{k}_\mathrm{mag}$ parallel to the $\alpha$-MnO$_2$ tunnels [$|\vec{k}_\mathrm{mag}|=0.36902(15)$], with the latter most likely to be helical. The period of oscillation of the helical component is in line with predictions based on a Heisenberg spin Hamiltonian [Mandal \textit{et al}. Phys. Rev. B 90, 104420 (2014)]. Below $T_3=24$\,K, there is a magnetic transition, which gives rise to a different set of magnetic Bragg peaks indicative of a highly complex magnetic structure.

cond-mat.mtrl-sci↗

arXiv2021

Operando monitoring of single-particle kinetic state-of-charge heterogeneities and cracking in high-rate Li-ion anodes

Recent years have seen a rapidly escalating demand for battery technologies capable of storing more energy, charging more quickly and having longer usable lifetimes, driven largely by increased electrification of transport and by grid-scale energy storage systems. This has led to the development of many promising new electrode materials for high-rate lithium ion batteries. In order to rationalise and improve upon material performance, it is crucial to understand the fundamental ion-intercalation and degradation mechanisms occurring during realistic battery operation, on the nano- to meso-scale. Here we apply a straightforward laboratory-based operando optical scattering microscopy method to study micron-sized rods of the high-rate anode material Nb$_{14}$W$_3$O$_{44}$ during cycling at rates of up to 30C. We directly visualise an elongation of the rods, which, by comparison with ensemble X-ray diffraction, allows us to determine the state of charge (SOC) of the individual particle. A continuous change in scattering intensity with SOC is also seen, enabling observation of a non-equilibrium kinetic phase separation within individual particles. Phase field modelling (informed by pulsed-field-gradient nuclear magnetic resonance and electrochemical experiments) is used to verify the kinetic origin of this separation, which arises from a dependence of the Li-ion diffusion coefficient upon SOC. Finally, we witness how such intra-particle SOC heterogeneity can lead to particle cracking; we follow the cycling behaviour of the resultant fragments, and show that they may become electrically disconnected from the electrode. These results demonstrate the power of optical scattering microscopy to track rapid non-equilibrium processes, often occurring over less than 1 minute, which would be inaccessible with established characterisation techniques.

physics.app-ph↗

arXiv2020

NMR studies of adsorption and diffusion in porous carbonaceous materials

Porous carbonaceous materials have many important industrial applications including energy storage, water purification, and adsorption of volatile organic compounds. Most of their applications rely upon the adsorption of molecules or ions within the interior pore volume of the carbon particles. Understanding the behaviour and properties of adsorbate species on the molecular level is therefore key for optimising porous carbon materials, but this is very challenging owing to the complexity of the disordered carbon structure and the presence of multiple phases in the system. In recent years, NMR spectroscopy has emerged as one of the few experimental techniques that can resolve adsorbed species from those outside the pore network. Adsorbed, or "in-pore" species give rise to resonances that appear at lower chemical shifts compared to their free (or "ex-pore") counterparts. This shielding effect arises primarily due to ring currents in the carbon structure in the presence of a magnetic field, such that the observed chemical shift differences upon adsorption are nucleus-independent to a first approximation. Theoretical modelling has played an important role in rationalising and explaining these experimental observations. Together, experiments and simulations have enabled a large amount of information to be gained on the adsorption and diffusion of adsorbed species, as well as on the structural and magnetic properties of the porous carbon adsorbent. Here, we review the methodological developments and applications of NMR spectroscopy and related modelling in this field, and provide perspectives on possible future applications and research directions.

cond-mat.mtrl-sci↗

arXiv2020

Operando optical tracking of single-particle ion dynamics and phase transitions in battery electrodes

Key to advancing lithium-ion battery technology, and in particular fast charging capabilities, is our ability to follow and understand the dynamic processes occurring in operating materials under realistic conditions, in real time, and on the nano- to meso-scale. Currently, operando imaging of lithium-ion dynamics requires sophisticated synchrotron X-ray or electron microscopy techniques, which do not lend themselves to high-throughput material screening. This limits rapid and rational materials improvements. Here we introduce a simple lab-based, optical interferometric scattering microscope to resolve nanoscopic lithium-ion dynamics in battery materials and apply it to follow the repeated cycling of the archetypical cathode material Li$_\textit{x}$CoO$_2$. The method allows us to visualise directly the insulator-metal, solid solution and lithium ordering phase transitions in this material. We determine rates of lithium insertion and removal at the single-particle level and identify different mechanisms that occur on charge vs. discharge. Finally, we capture the dynamic formation of domain boundaries between different crystal orientations associated with the monoclinic lattice distortion at around Li$_{0.5}$CoO$_2$. The high throughput nature of our methodology allows many particles to be sampled across the entire electrode and, moving forward, will enable exploration of the role of dislocations, morphologies and cycling rate on battery degradation. The generality of our imaging concept means that it can be applied to study any battery electrode, and more broadly, systems where the transport of ions is associated with electronic or structural changes, including nanoionic films, ionic conducting polymers, photocatalytic materials and memristors.

cond-mat.mtrl-sci↗

arXiv2020

Strengthening the magnetic interactions in pseudobinary first-row transition metal thiocyanates, $\it{M}$(NCS)$_{2}$

Understanding the effect of chemical composition on the strength of magnetic interactions is key to the design of magnets with stronger exchange interactions. The magnetic divalent first-row transition metal (TM) thiocyanates are a class of chemically simple layered molecular frameworks. Here, we report two new members of the family, manganese (II) thiocyanate, Mn(NCS)$_{2}$, and iron (II) thiocyanate, Fe(NCS)$_{2}$. Using magnetic susceptibility measurements on these materials and on cobalt (II) thiocyanate and nickel (II) thiocyanate, Co(NCS)$_{2}$ and Ni(NCS)$_{2}$, respectively, we identify significantly stronger net antiferromagnetic interactions between the earlier TM ions-a decrease in the Weiss constant, θ, from 29 K for Ni(NCS)$_{2}$ to -115 K for Mn(NCS)$_{2}$-a consequence of more diffuse 3d orbitals, increased orbital overlap and increasing numbers of unpaired $\it{t}$$_{2g}$ electrons. We elucidate the magnetic structures of these materials: Mn(NCS)$_{2}$, Fe(NCS)$_{2}$ and Co(NCS)$_{2}$ order into the same antiferromagnetic commensurate ground state, whilst Ni(NCS)$_{2}$ adopts a ground state structure consisting of ferromagnetically ordered layers stacked antiferromagnetically. We show that magnetic molecular frameworks with significantly stronger net exchange interactions can be constructed by using earlier TMs.

cond-mat.mtrl-sci↗

arXiv2020

Local distortions and dynamics in hydrated Y-doped BaZrO$_3$

Y-doped BaZrO$_3$ is a promising proton conductor for intermediate temperature solid oxide fuel cells. In this work, a combination of static DFT calculations and DFT based molecular dynamics (DFT-MD) was used to study proton conduction in such a material. Geometry optimisations of 100 structures with a 12.5% dopant concentration allowed us to identify a clear correlation between the bending of the metal-oxygen-metal angle and the energies of the simulated cells. Depending on the type of bending, two configurations, designated as inwards bending and outwards bending, were defined. The results demonstrate that a larger bending decreases the energy and that the lowest energies are observed for structures combining inwards bending with protons being close to the dopant atoms. These lowest energy structures are the ones with the strongest hydrogen bonds. DFT-MD simulations in cells with different yttrium distributions provide complementary microscopic information on proton diffusion as they capture the dynamic distortions of the lattice caused by thermal motion. A careful analysis of the proton jumps between different environments confirmed that the inwards and outwards bending states are relevant for the understanding of proton diffusion. Indeed, intra-octahedral jumps were shown to only occur starting from an outwards configuration while the inwards configuration seems to favor rotations around the oxygen. On average, in the DFT-MD simulations, the hydrogen bond lengths are shorter for the outwards configuration which facilitates the intraoctahedral jumps. Diffusion coefficients and activation energies were also determined and compared to previous theoretical and experimental data showing a good agreement with previous data corresponding to local proton motion.

cond-mat.mtrl-sci↗

arXiv2019

Cation Disorder and Lithium Insertion Mechanism of Wadsley--Roth Crystallographic Shear Phases

Wadsley--Roth crystallographic shear phases form a family of compounds that have attracted attention due to their excellent performance as lithium-ion battery electrodes. The complex crystallographic structure of these materials poses a challenge for first-principles computational modelling and hinders the understanding of their structural, electronic and dynamic properties. In this article, we study three different niobium-tungsten oxide crystallographic shear phases (Nb$_{12}$WO$_{33}$, Nb$_{14}$W$_{3}$O$_{44}$, Nb$_{16}$W$_5$O$_{55}$) using an enumeration-based approach and first-principles density-functional theory calculations. We report common principles governing the cation disorder, lithium insertion mechanism, and electronic structure of these materials. Tungsten preferentially occupies tetrahedral and block-central sites within the block-type crystal structures. The lithium insertion proceeds via a three-step mechanism, associated with an anisotropic evolution of the host lattice. Our calculations reveal an important connection between long-range and local structural changes: in the second step of the mechanism, the removal of local structural distortions leads to the contraction of the lattice along specific crystallographic directions, buffering the volume expansion of the material. Niobium-tungsten oxide shear structures host small amounts of localised electrons during initial lithium insertion due to the confining effect of the blocks, but quickly become metallic upon further lithiation. We argue that the combination of local, long-range, and electronic structural evolution over the course of lithiation is beneficial to the performance of these materials as battery electrodes. The mechanistic principles we establish arise from the compound-independent crystallographic shear structure, and are therefore likely to apply to Ti/Nb oxide or pure Nb oxide shear phases.

cond-mat.mtrl-sci↗

arXiv2019

First-Principles Study of Localised and Delocalised Electronic States in Crystallographic Shear Phases of Niobium Oxide

Crystallographic shear phases of niobium oxide form an interesting family of compounds that have received attention both for their unusual electronic and magnetic properties, as well as their performance as intercalation electrode materials for lithium-ion batteries. Here, we present a first-principles density-functional theory study of the electronic structure and magnetism of H-Nb$_2$O$_5$, Nb$_{25}$O$_{62}$, Nb$_{47}$O$_{116}$, Nb$_{22}$O$_{54}$, and Nb$_{12}$O$_{29}$. These compounds feature blocks of niobium-oxygen octahedra as structural units, and we show that this block structure leads to a coexistence of flat and dispersive energy bands, corresponding to localised and delocalised electronic states. Electrons localise in orbitals spanning multiple niobium sites in the plane of the blocks. Localised and delocalised electronic states are both effectively one-dimensional and are partitioned between different types of niobium sites. Flat bands associated with localised electrons are present even at the GGA level, but a correct description of the localisation requires the use of GGA+U or hybrid functionals. We discuss the experimentally observed electrical and magnetic properties of niobium suboxides in light of our results, and argue that their behaviour is similar to that of $n$-doped semiconductors, but with a limited capacity for localised electrons. When a threshold of one electron per block is exceeded, metallic electrons are added to existing localised electrons. We propose that this behaviour of shear phases is general for any type of $n$-doping, and should transfer to doping by alkali metal (lithium) ions during operation of niobium oxide-based battery electrodes. Future directions for theory and experiment on mixed-metal shear phases are suggested.

cond-mat.mtrl-sci↗

arXiv2018

The role of ionic liquid breakdown in the electrochemical metallization of VO2: An NMR study of gating mechanisms and VO2 reduction

Metallization of initially insulating VO2 via ionic liquid electrolytes (electrolyte gating) has recently been a topic of much interest. It is clear that the metallization takes place electrochemically and there has previously been extensive evidence for the removal of small amounts of oxygen during ionic liquid gating. Hydrogen intercalation has also been proposed, but the source of the hydrogen has remained unclear. In this work, solid-state magic angle spinning NMR spectroscopy is used to investigate the thermal metal-insulator transition in VO2, before progressing to catalytically hydrogenated and electrochemically metallized VO2. Electrochemical metallization of bulk VO2 particles is shown to be associated with intercalation of hydrogen, the degree of which can be measured with quantitative 1H NMR spectroscopy. Possible sources of the hydrogen are explored, and by using a selectively deuterated ionic liquid, it is revealed that the hydrogenation is due to deprotonation of the ionic liquid; specifically, for the commonly used dialkylimidazolium based ionic liquids, it is the "carbene" proton that is responsible. Increasing the temperature of the electrochemistry is shown to increase the degree of hydrogenation, forming first a less hydrogenated metallic phase then a more hydrogenated insulating Curie-Weiss paramagnetic phase, both of which were also observed for catalytically hydrogenated VO2. The NMR results are supported by magnetic susceptibility measurements, which corroborate the degree of Pauli and Curie-Weiss paramagnetism. NMR spectroscopy is used to identify the presence of hydrogen in an electrolyte gated thin film of VO2, suggesting that electrolyte breakdown, proton intercalation and reactions with decomposition products within the electrolyte should not be ignored when interpreting the electronic and structural changes observed in electrochemical gating experiments.

cond-mat.str-el↗