arXiv subjects

Clarence Chang

Publications and source records attributed to Clarence Chang.

13 recordsLinked to original sources

arXiv2025

Development Status of the KIPM Detector Consortium

A Kinetic Inductance Phonon-Mediated Detector is a calorimeter that uses kinetic inductance detectors to read out phonon signals from the device substrate. We have established a consortium comprising university and national lab groups dedicated to advancing the state of the art in these detectors, with the ultimate goal of designing a detector sub-eV threshold on energy deposited in the substrate, enabling searches for both light dark matter and low-energy neutrino interactions. This consortium brings together experts in kinetic inductance detector design, phonon and quasiparticle dynamics, and noise modeling, along with specialized fabrication facilities, test platforms, and unique calibration capabilities. Recently, our consortium has demonstrated a resolution on energy absorbed by the sensor of 2.1 eV, the current record for such devices. The current focus of the consortium is modeling and improving the phonon collection efficiency and implementing low-$\boldsymbol{T_c}$ superconductors, both of which serve to improve the overall energy resolution and threshold of the detectors.

physics.ins-det↗

arXiv2025

Room temperature reactive sputtering deposition of titanium nitride with high sheet kinetic inductance

Superconducting thin films with high intrinsic kinetic inductance $L_{k}$ are important for high-sensitivity detectors, enabling strong coupling in hybrid quantum systems, and enhancing nonlinearities in quantum devices. We report the room-temperature reactive sputtering of titanium nitride thin films with a critical temperature $T_{c}$ of \SI{3.8}{K} and a thickness of \SI{27}{nm}. Fabricated into resonators, these films exhibit a sheet kinetic inductance $L_{k, \square}$ of 394~$\textrm{pH}/\square$, as inferred from resonant frequency measurements. %from this film and measure quality factors of $4\times 10^{4}$; these quality factors are likely limited by the low resistivity wafer. X-ray diffraction analysis confirms the formation of stoichiometric TiN, with no residual unreacted titanium. The films also demonstrate a characteristic sheet resistivity of 475~$\Omega/\square$, yielding an impedance an order of magnitude higher than conventional 50~$\Omega$ resonators. This property could enhance microwave single\textendash photon coupling strength by an order of magnitude, offering transformative potential for hybrid quantum systems and quantum sensing. Furthermore, the high $L_{k}$ enables Kerr nonlinearities comparable to state\textendash of\textendash the\textendash art quantum devices. Combined with its relatively high $T_{c}$, this thin film presents a promising platform for superconducting devices, including amplifiers and qubits operating at higher temperatures.

cond-mat.supr-con↗

arXiv2025

MOSAIC: Magnonic Observations of Spin-dependent Axion-like InteraCtions

We introduce an array-scalable, magnon-based detector (MOSAIC) to search for the spin-dependent interactions of electron-coupled axion dark matter. These axions can excite single magnons in magnetic targets, such as the yttrium iron garnet (YIG) spheres used here, which are subsequently sensed by the detector. For MOSAIC, this sensing is implemented by coupling the magnons in the YIG spheres to magnetic-field-resilient single-electron charge-qubits, whose state is then interrogated with a quantum non-demolition measurement. Using standard superconducting fabrication techniques, MOSAIC can integrate many YIG sphere-qubit sensors, forming a large detector array. We outline the detector design and operation, and determine its sensitivity to axion dark matter. We find that a detector built with available technology will exceed the sensitivity of previous ferromagnetic haloscopes, and provides a platform where further improvements in performance would search for electron-coupled axion dark matter in unexplored parameter space.

hep-ph↗

arXiv2023

Flux coupled tunable superconducting resonator

We present a design and implementation of frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC-loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby current feedline induces Meissner shielding currents in the resonator loop leading to change in the kinetic part of the total inductance of the resonator. We demonstarte continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency upconversion is achieved when kHz AC modulation signal is superimposed onto the DC bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pumping the nonlinear kinetic inductance using a strong RF pump signal in the feedline. The simple architecture is amenable to large array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, upconverters, and parametric amplifiers operating above 4 Kelvin cryogenic temperatures when alternative high critical temperature material with high kinetic inductance is used.

cond-mat.supr-con↗

arXiv2023

Ion-beam Assisted Sputtering of Titanium Nitride Thin Films

Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In previous work on niobium nitride, ion beam-assisted sputtering (IBAS) reduced nitrogen sensitivity during deposition in tandem with an increase in nominal critical temperature. We have deposited thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method and compare their superconducting critical temperatures Tc as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and X-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature and 33% reduced sensitivity to nitrogen flow, without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting Tc in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting Tc due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.

cond-mat.supr-con↗

arXiv2022

Broadband solenoidal haloscope for terahertz axion detection

We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry enables enclosure in standard cryostats and high-field solenoids, overcoming limitations of current dish antennas. A pilot 0.7 m$^{2}$ barrel experiment planned at Fermilab is projected to surpass existing dark photon coupling constraints by over a decade with one-day runtime. Axion sensitivity requires $<10^{-20}$ W/$\sqrt{\textrm{Hz}}$ sensor noise equivalent power with a 10 T solenoid and 10 m$^{2}$ barrel. We project BREAD sensitivity for various sensor technologies and discuss future prospects.

physics.ins-det↗

arXiv2022

Photon counting from the vacuum ultraviolet to the short wavelength infrared using semiconductor and superconducting technologies

In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in HEP. In this white paper we discuss the need for photon counting technologies in future projects, and present some technological opportunities to address those needs.

physics.ins-det↗

arXiv2021

Development of MKIDs for measurement of the Cosmic Microwave Background with the South Pole Telescope

We present details of the design, simulation, and initial test results of prototype detectors for the fourth-generation receiver of the South Pole Telescope (SPT). Optimized for the detection of key secondary anisotropies of the cosmic microwave background (CMB), SPT-3G+ will measure the temperature and polarization of the mm/sub-mm sky at 220, 285, and 345 GHz, beyond the peak of the CMB blackbody spectrum. The SPT-3G+ focal plane will be populated with microwave kinetic inductance detectors (MKIDs), allowing for significantly increased detector density with reduced cryogenic complexity. We present simulation-backed designs for single-color dual-polarization MKID pixels at each SPT-3G+ observation frequency. We further describe design choices made to promote resonator quality and uniformity, enabling us to maximize the available readout bandwidth. We also discuss aspects of the fabrication process that enable rapid production of these devices and present an initial dark characterization of a series of prototype devices.

astro-ph.IM↗

arXiv2021

Design and performance of a multi-terahertz Fourier transform spectrometer for axion dark matter experiments

Dedicated spectrometers for terahertz radiation with [0.3, 30] THz frequencies using traditional optomechanical interferometry are substantially less common than their infrared and microwave counterparts. This paper presents the design and initial performance measurements of a tabletop Fourier transform spectrometer (FTS) for multi-terahertz radiation using infrared optics in a Michelson arrangement. This is coupled to a broadband pyroelectric photodetector designed for [0.1, 30] THz frequencies. We measure spectra of narrowband and broadband input radiation to characterize the performance of this instrument above 10 THz, where signal-to-noise is high. This paves the groundwork for planned upgrades to extend below 10 THz. We also briefly discuss potential astroparticle physics applications of such FTS instruments to broadband axion dark matter searches, whose signature comprises low-rate monochromatic photons with unknown frequency.

physics.ins-det↗

arXiv2020

Observation of an antiferromagnetic quantum critical point in high-purity LaNiO$_3$

Amongst the rare-earth perovskite nickelates, LaNiO$_3$ (LNO) is an exception. While the former have insulating and antiferromagnetic ground states, LNO remains metallic and non-magnetic down to the lowest temperatures. It is believed that LNO is a strange metal, on the verge of an antiferromagnetic instability. Our work suggests that LNO is a quantum critical metal, close to an antiferromagnetic quantum critical point (QCP). The QCP behavior in LNO is manifested in epitaxial thin films with unprecedented high purities. We find that the temperature and magnetic field dependences of the resistivity of LNO at low temperatures are consistent with scatterings of charge carriers from weak disorder and quantum fluctuations of an antiferromagnetic nature. Furthermore, we find that the introduction of a small concentration of magnetic impurities qualitatively changes the magnetotransport properties of LNO, resembling that found in some heavy-fermion Kondo lattice systems in the vicinity of an antiferromagnetic QCP.

cond-mat.str-el↗

arXiv2019

Superconductivity in the dilute single band limit in reduced Strontium Titanate

We report on superconductivity in single crystals of SrTiO$_{3-δ}$ with carrier densities $\textit{n} < 1.4 \times10^{18}cm^{-3}$, where only a single band is occupied. For all samples in this regime, the resistive transition occurs at $T_{c} \approx 65 \pm 25 \ mK$. We observe a zero resistance state for $\textit{n}$ as low as $1.03 \times10^{17}cm^{-3}$, and a partial resistive transition for $\textit{n} = 3.85 \times10^{16}cm^{-3}$. We observe low critical current densities, relatively high and isotropic upper critical fields, and an absence of diamagnetic screening in these samples. Our findings suggest an inhomogeneous superconducting state, embedded within a homogeneous high-mobility 3-dimensional electron gas. $T_{c}$ does not vary appreciably when $\textit{n}$ changes by more than an order of magnitude, inconsistent with conventional superconductivity.

cond-mat.supr-con↗

arXiv2018

Optical Characterization of the SPT-3G Focal Plane

The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers

astro-ph.IM↗

arXiv2018

Quantum Sensing for High Energy Physics

Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.

hep-ex↗