arXiv subjects

Claudia Mendes de Oliveira

Publications and source records attributed to Claudia Mendes de Oliveira.

At least 73 records · Page 4Linked to original sources

arXiv2016

Rotation curve fitting and its fatal attraction to cores in realistically simulated galaxy observations

We study the role of systematic effects in observational studies of the cusp-core problem under the minimum disc approximation using a suite of high-resolution (25-pc softening length) hydrodynamical simulations of dwarf galaxies. We mimic realistic kinematic observations and fit the mock rotation curves with two analytic models commonly used to differentiate cores from cusps in the dark matter distribution. We find that the cored pseudo-isothermal sphere (ISO) model is strongly favoured by the reduced $χ^2_ν$ of the fits in spite of the fact that our simulations contain cuspy Navarro-Frenk-White profiles (NFW). We show that even idealized measurements of the gas circular motions can lead to the incorrect answer if velocity underestimates induced by pressure support, with a typical size of order $\sim$5 km s$^{-1}$ in the central kiloparsec, are neglected. Increasing the spatial resolution of the mock observations leads to more misleading results because the inner region, where the effect of pressure support is most significant, is better sampled. Fits to observations with a spatial resolution of 100 pc (2 arcsec at 10 Mpc) favour the ISO model in 78-90 per cent of the cases, while at 800-pc resolution, 40-78 per cent of the galaxies indicate the fictitious presence of a dark matter core. The coefficients of our best-fit models agree well with those reported in observational studies; therefore, we conclude that NFW haloes can not be ruled out reliably from this type of analysis.

astro-ph.GA↗

arXiv2016

Prime Focus Spectrograph (PFS) for the Subaru Telescope: Overview, recent progress, and future perspectives

PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~1.6-2.7A. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project is now going into the construction phase aiming at undertaking system integration in 2017-2018 and subsequently carrying out engineering operations in 2018-2019. This article gives an overview of the instrument, current project status and future paths forward.

astro-ph.IM↗

arXiv2016

An Accurate Cluster Selection Function for the J-PAS Narrow-Band wide-field survey

The impending Javalambre Physics of the accelerating universe Astrophysical Survey (J-PAS) will be the first wide-field survey of $\gtrsim$ 8500 deg$^2$ to reach the `stage IV' category. Because of the redshift resolution afforded by 54 narrow-band filters, J-PAS is particularly suitable for cluster detection in the range z$<$1. The photometric redshift dispersion is estimated to be only $\sim 0.003$ with few outliers $\lesssim$ 4\% for galaxies brighter than $i\sim23$ AB, because of the sensitivity of narrow band imaging to absorption and emission lines. Here we evaluate the cluster selection function for J-PAS using N-body+semi-analytical realistic mock catalogues. We optimally detect clusters from this simulation with the Bayesian Cluster Finder, and we assess the completeness and purity of cluster detection against the mock data. The minimum halo mass threshold we find for detections of galaxy clusters and groups with both $>$80\% completeness and purity is $M_h \sim 5 \times 10^{13}M_{\odot}$ up to $z\sim 0.7$. We also model the optical observable, $M^*_{\rm CL}$-halo mass relation, finding a non-evolution with redshift and main scatter of $σ_{M^*_{\rm CL} | M_{\rm h}}\sim 0.14 \,dex$ down to a factor two lower in mass than other planned broad-band stage IV surveys, at least. For the $M_{\rm h} \sim 1 \times 10^{14}M_{\odot}$ Planck mass limit, J-PAS will arrive up to $z\sim 0.85$ with a $σ_{M^*_{\rm CL} | M_{\rm h}}\sim 0.12 \, dex$. Therefore J-PAS will provide the largest sample of clusters and groups up to $z\sim 0.8$ with a mass calibration accuracy comparable to X-ray data.

astro-ph.CO↗

arXiv2015

The SLUGGS survey: chromo-dynamical modelling of the lenticular galaxy NGC 1023

Globular clusters (GCs) can be considered discrete, long-lived, dynamical tracers that retain crucial information about the assembly history of their parent galaxy. In this paper, we present a new catalogue of GC velocities and colours for the lenticular galaxy NGC 1023, we study their kinematics and spatial distribution, in comparison with the underlying stellar kinematics and surface brightness profile, and we test a new method for studying GC properties. Specifically, we decompose the galaxy light into its spheroid (assumed to represent the bulge + halo components) and disk components and use it to assign to each GC a probability of belonging to one of the two components. Then we model the galaxy kinematics, assuming a disk and spheroidal component, using planetary nebulae (PNe) and integrated stellar light. We use this kinematic model and the probability previously obtained from the photometry to recalculate for each GC its likelihood of being associated with the disk, the spheroid, or neither. We find that the reddest GCs are likely to be associated with the disk, as found for faint fuzzies in this same galaxy, suggesting that the disk of this S0 galaxy originated at z ~ 2. The majority of blue GCs are found likely to be associated with the spheroidal (hot) component. The method also allows us to identify objects that are unlikely to be in equilibrium with the system. In NGC1023 some of the rejected GCs form a substructure in phase space that is connected with NGC 1023 companion galaxy.

astro-ph.GA↗

arXiv2015

Star-Forming Compact Groups (SFCGs): An ultraviolet search for a local sample

We present a local sample (z<0.15) of 280 Star-Forming Compact Groups (SFCGs) of galaxies identified in the ultraviolet Galaxy Evolution EXplorer (GALEX) All-sky Imaging Survey (AIS). So far, just one prototypical example of SFCG, the Blue Infalling Group, has been studied in detail in the Local Universe. The sample of SFCGs is mainly the result of applying a Friends-of-Friends group finder in the space of celestial coordinates with a maximum linking-length of 1.5 arcmin and choosing groups with a minimum number of four members of bright UV-emitting 17<FUV<20.5 sources (mostly galaxies) from the GALEX/AIS catalogue. The result from the search are 280 galaxy groups composed by 226, 39, 11 and 4 groups of four, five, six and seven bright ultraviolet (UV) members, respectively. Only 59 of these 280 newly identified SFCGs have a previous catalogued group counterpart. Group redshifts are available for at least one member in 75% of the SFCGs, and over 40% of the SFCGs have redshifts measured for two or more galaxies. Twenty-six of the SFCGs appear to be located in the infalling regions of clusters with known redshift. The SFCG sample presents a combination of properties different from the group samples studied up to now, such as low velocity dispersions of $σ_{\rm{}l-o-s}$$\sim$120 km/s, small crossing-times ($H_{0}$$t_{c}$$\sim$0.05) and high star-formation content (95% of star-forming galaxies). This points to the SFCGs being in an evolutionary stage distinct from those groups selected in the optical and near-infrared ranges (see Fig. 6).

astro-ph.GA↗

arXiv2015

Prime Focus Spectrograph for the Subaru telescope: massively multiplexed optical and near-infrared fiber spectrograph

The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy/AGN evolution. A medium resolution mode with a resolving power of 5000 for 0.71 μm to 0.89 μm will also be available by simply exchanging dispersers. We highlight some of the technological aspects of the design. To transform the telescope focal ratio, a broad-band coated microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of the cable system, optimizing overall throughput; a fiber with low focal ratio degradation is selected for the fiber-positioner and fiber-slit components, minimizing the effects of fiber movements and fiber bending. Fiber positioning will be performed by a positioner consisting of two stages of piezo-electric rotary motors. The positions of these motors are measured by taking an image of artificially back-illuminated fibers with the metrology camera located in the Cassegrain container; the fibers are placed in the proper location by iteratively measuring and then adjusting the positions of the motors. Target light reaches one of the four identical fast-Schmidt spectrograph modules, each with three arms. The PFS project has passed several project-wide design reviews and is now in the construction phase.

astro-ph.IM↗

arXiv2015

A derivation of masses and total luminosities of galaxy groups and clusters in the maxBCG catalogue

We report the results of a multi-waveband analysis of the masses and luminosities of $\sim$600 galaxy groups and clusters identified in the maxBCG catalogue. These data are intended to form the basis of future work on the formation of the "$m_{12}$ gap" in galaxy groups and clusters. We use SDSS spectroscopy and $g$, $r$ and $i$ band photometry to estimate galaxy group/cluster virial radii, masses and total luminosities. In order to establish the robustness of our results, we compare them with literature studies that utilize a variety of mass determinations techniques (dynamical, X-ray, weak lensing) and total luminosities estimated in the $B$, $r$, $i$, and $K$ wavebands. We also compare our results to predictions derived from the Millennium Simulation. We find that, once selection effects are properly accounted for, excellent agreement exists between our results and the literature with the exception of a single observational study. We also find that the Millennium Simulation does an excellent job of predicting the effects of our selection criteria. Our results show that, over the mass range $\sim10^{13}-10^{15}$ M$_{\odot}$, variations in the slope of the mass-luminosity scaling relation with mass detected in this and many other literature studies is in part the result of selection effects. We show that this can have serious ramifications on attempts to determine how the mass-to-light ratio of galaxy groups and cluster varies with mass.

astro-ph.CO↗

arXiv2014

A 3D view of the Hydra I galaxy cluster core - I. Kinematic substructures

We used FORS2 in MXU mode to mimic a coarse 'IFU' in order to measure the 3D large-scale kinematics around the central Hydra I cluster galaxy NGC 3311. Our data show that the velocity dispersion field varies as a function of radius and azimuthal angle and violates point symmetry. Also, the velocity field shows similar dependence, hence the stellar halo of NGC 3311 is a dynamically young structure. The kinematic irregularities coincide in position with a displaced diffuse halo North-East of NGC 3311 and with tidal features of a group of disrupting dwarf galaxies. This suggests that the superposition of different velocity components is responsible for the kinematic substructure in the Hydra I cluster core.

astro-ph.GA↗

arXiv2014

Are compact groups hostile towards faint galaxies?

The goal of this work is to understand whether the extreme environment of compact groups can affect the distribution and abundance of faint galaxies around them. We performed an analysis of the faint galaxy population in the vicinity of compact groups and normal groups. We built a light-cone mock galaxy catalogue constructed from the Millennium Run Simulation II plus a semi-analytical model of galaxy formation. We identified a sample of compact groups in the mock catalogue as well as a control sample of normal galaxy groups and computed the projected number density profiles of faint galaxies around the first- and the second-ranked galaxies. We also compared the profiles obtained from the semi-analytical galaxies in compact groups with those obtained from observational data. In addition, we investigated whether the ranking or the luminosity of a galaxy is the most important parameter in the determination of the centre around which the clustering of faint galaxies occurs. There is no particular influence of the extreme compact group environment on the number of faint galaxies in such groups compared to control groups. When selecting normal groups with separations between the 1st and 2nd ranked galaxies similar to what is observed in compact groups, the faint galaxy projected number density profiles in compact groups and normal groups are similar in shape and height. We observed a similar behaviour of the population of faint galaxies in observations and simulations in the regions closer to the 1st and 2nd ranked galaxies. Finally, we find that the projected density of faint galaxies is higher around luminous galaxies,regardless of the ranking in the compact group. The semi-analytical approach shows that compact groups and their surroundings do not represent a hostile enough environment to make faint galaxies to behave differently than in normal groups.

astro-ph.GA↗

arXiv2014

Star Formation Histories Across the Interacting Galaxy NGC 6872, the Largest-Known Spiral

NGC 6872, hereafter the Condor, is a large spiral galaxy that is interacting with its closest companion, the S0 galaxy IC 4970. The extent of the Condor provides an opportunity for detailed investigation of the impact of the interaction on the current star formation rate and its history across the galaxy, on the age and spatial distribution of its stellar population, and on the mechanism that drive the star formation activity. To address these issues we analyzed the far-ultraviolet (FUV) to near-infrared (near-IR) spectral energy distribution (SED) of 17, 10 kpc diameter, regions across the galaxy, and derived their star formation history, current star formation rate, and stellar population and mass. We find that most of the star formation takes place in the extended arms, with very little star formation in the central 5 kpc of the galaxy, in contrast to what was predicted from previous numerical simulations. There is a trend of increasing star formation activity with distance from the nucleus of the galaxy, and no evidence for a recent increase in the current star formation rate (SFR) due to the interaction. The nucleus itself shows no significant current star formation activity. The extent of the Condor also provides an opportunity to test the applicability of a single standard prescription for conversion of the FUV + IR (22 micron) intensities to a star formation rate for all regions. We find that the conversion factor differs from region to region, arising from regional differences in the stellar populations.

astro-ph.GA↗

arXiv2014

Studying focal ratio degradation of optical fibers for Subaru Prime Focus Spectrograph

Focal Ration Degradation (FRD) is a change in light angular distribution caused by fiber optics. FRD is important to fiber-fed, spectroscopic astronomical systems because it can cause loss of signal, degradation in spectral resolution, or increased complexity in spectrograph design. Laboratório Nacional de Astrofísica (LNA) has developed a system that can accurately and precisely measures FRD, using an absolute method that can also measure fiber throughput. This paper describes the metrology system and shows measurements of Polymicro fiber FBP129168190, FBP127165190 and Fujikura fiber 128170190. Although the FRD of the two fibers are low and similar to one another, it is very important to know the exact characteristics of these fibers since both will be used in the construction of FOCCoS (Fiber Optical Cable and Connectors System) for PFS (Prime Focus Spectrograph) to be installed at the Subaru telescope.

astro-ph.IM↗

arXiv2014

Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph

The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 um to 0.89 um also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts project, while Hyper Suprime-Cam works on the imaging part. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated glass-molded microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms.

astro-ph.IM↗

arXiv2014

Polish device for FOCCoS/PFS slit system

The Fiber Optical Cable and Connector System, FOCCoS, for the Prime Focus Spectrograph, PFS, is responsible for transporting light from the Subaru Telescope focal plane to a set of four spectrographs. Each spectrograph will be fed by a convex curved slit with 616 optical fibers organized in a linear arrangement. The slit frontal surface is covered with a special dark composite, made with refractory oxide, which is able to sustain its properties with minimum quantities of abrasives during the polishing process; this stability is obtained This stability is obtained by the detachment of the refractory oxide nanoparticles, which then gently reinforce gently the polishing process and increase its the efficiency. The surface roughness measured in several samples after high performance polishing was about 0.01 microns. Furthermore, the time for obtaining a polished surface with this quality is about 10 times less than the time required for polishing a brass, glass or ceramic surface of the same size. In this paper, we describe the procedure developed for high quality polishing of this type of slit. The cylindrical polishing described here, uses cylindrical concave metal bases on which glass paper is based. The polishing process consists to use grid sequences of 30 microns, 12 microns, 9 microns, 5 microns, 3 microns, 1 micron and, finally, a colloidal silica on a chemical cloth. To obtain the maximum throughput, the surface of the fibers should be polished in such a way that they are optically flat and free from scratches. The optical fibers are inspected with a microscope at all stages of the polishing process to ensure high quality. The efficiency of the process may be improved by using a cylindrical concave composite base as a substrate suitable for diamond liquid solutions. Despite this process being completely by hand, the final result shows a very high quality.

astro-ph.IM↗

arXiv2014

Slit device for FOCCoS, PFS, Subaru

The Fiber Optical Cable and Connector System, FOCCoS, subsystem of the Prime Focus Spectrograph, PFS, for Subaru telescope, is responsible to feed four spectrographs with a set of optical fibers cables. The light injection for each spectrograph is assured by a convex curved slit with a linear array of 616 optical fibers. In this paper we present a design of a slit that ensures the right direction of the fibers by using masks of micro holes. This kind of mask is made by a technique called electroforming, which is able to produce a nickel plate with holes in a linear sequence. The precision error is around 1micron in the diameter and 1 micron in the positions of the holes. This nickel plate may be produced with a thickness between 50 and 200 microns, so it may be very flexible. This flexibility allows the mask to be bent into the shape necessary for a curved slit. The concept requires two masks, which we call Front Mask, and Rear Mask, separated by a gap that defines the thickness of the slit. The pitch and the diameter of the holes define the linear geometry of the slit; the curvature of each mask defines the angular geometry of the slit. Obviously, this assembly must be mounted inside a structure rigid and strong enough to be supported inside the spectrograph. This structure must have a CTE optimized to avoid displacement of the fibers or increased FRD of the fibers when the device is submitted to temperatures around 3 degrees Celsius, the temperature of operation of the spectrograph. We have produced two models. Both are mounted inside a very compact Invar case, and both have their front surfaces covered by a dark composite, to reduce stray light. Furthermore, we have conducted experiments with two different internal structures to minimize effects caused by temperature gradients.

astro-ph.IM↗

arXiv2014

Spatially resolved stellar population parameters in the BCGs of two fossil groups

We report the results of Gemini/GMOS long-slit spectroscopic observations along the major and minor axes of the central galaxies in two fossil groups, SDSS J073422.21+265133.9 and SDSS J075828.11+374711.8 (the NGC 2484 group). Spatially resolved kinematics and stellar population parameters (ages, metallicities and $α$-element abundance ratios) derived using ~20 Lick indices are presented. Despite remarkable similarities in their morphologies, photometric properties (luminosity and colour) and kinematics, the two galaxies exhibit significantly different stellar population parameters. SDSS J073422.21+265133.9 exhibits a strong metallicity gradient (Delta[Z/H]/Delta R ~ -0.4) all the way into the centre of the galaxy. It also exhibits an age profile that suggest a relatively recent, centrally concentrated burst of star formation superimposed on an older, more spatially extended population. NGC 2484, a well known X-ray AGN, exhibits a flat core-like structure in its metallicity gradient, but no detectable age gradient. The alpha-element abundance ratio ([E/Fe]) profiles of the two galaxies are also significantly different. SDSS J073422.21+265133.9 exhibits a slightly positive gradient (Delta [E/H]/Delta R ~ 0.1), perhaps again suggesting a more recent central burst of star formation, while NGC 2484 shows a negative gradient (Delta [E/H]/Delta R ~-0.1), indicating that star formation may have happened "inside out". Our analysis of these two galaxies of similar mass, morphology and kinematics therefore suggests two different mechanisms to have been in action during their formation. Consequently, we conclude that the central galaxies of fossil groups can not be considered a homogeneous group with regard to their formation processes or star formation histories.

astro-ph.GA↗

arXiv2013

Star-forming regions and the metallicity gradients in the tidal tails: The case of NGC 92

We present new Gemini/GMOS spectroscopic and archival imaging data of the interacting galaxy NGC 92, which is part of a compact group and displays an extended tidal tail. We have studied the physical properties of 20 star-forming complexes in this system. We found that the star-forming regions located in the tidal tail of NGC 92 have ages younger than 8 Myr, which suggests that these objects were formed in situ. The spectroscopic data reveals that these regions have slightly sub-solar metallicities, suggesting that they were formed from pre-enriched material. Using the oxygen abundances derived for each system, we found that the extended tidal tail of NGC 92 has a flat metallicity distribution. Although this scenario is consistent with N-body simulations of interacting systems, where there is gas mixing triggered by the interaction, archival Halpha Fabry-Perot data cubes of NGC 92 have not shown a velocity gradient along the tail of this galaxy, which under certain assumptions could be interpreted as a lack of gas flow in the tail. Our results suggest that a fraction of the enriched gas that was originally located in the center of the galaxy was expelled into the tidal tail when the interacting process that formed the tail happened. However, we can not exclude the scenario in which the star formation in the tail has increased its original oxygen abundance.

astro-ph.GA↗

arXiv2012

FOCCoS for Subaru PFS

The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs by an optical fibers cable as part of Subaru PFS instrument. Each positioner retains one fiber entrance attached at a microlens, which is responsible for the F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. The optical fibers cable will be segmented in 3 parts at long of the way, cable A, cable B and cable C, connected by a set of multi-fibers connectors. Cable B will be permanently attached at the Subaru telescope. The first set of multi-fibers connectors will connect the cable A to the cable C from the spectrograph system at the Nasmith platform. The cable A, is an extension of a pseudo-slit device obtained with the linear disposition of the extremities of the optical fibers and fixed by epoxy at a base of composite substrate. The second set of multi-fibers connectors will connect the other extremity of cable A to the cable B, which is part of the positioner's device structure. The optical fiber under study for this project is the Polymicro FBP120170190, which has shown very encouraging results. The kind of test involves FRD measurements caused by stress induced by rotation and twist of the fiber extremity, similar conditions to those produced by positioners of the PFS instrument. The multi-fibers connector under study is produced by USCONEC Company and may connect 32 optical fibers. The tests involve throughput of light and stability after many connections and disconnections. This paper will review the general design of the FOCCoS subsystem, methods used to fabricate the devices involved and the tests results necessary to evaluate the total efficiency of the set.

astro-ph.IM↗

arXiv2012

Prime Focus Spectrograph - Subaru's future -

The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project has been endorsed by Japanese community as one of the main future instruments of the Subaru 8.2-meter telescope at Mauna Kea, Hawaii. This optical/near-infrared multi-fiber spectrograph targets cosmology with galaxy surveys, Galactic archaeology, and studies of galaxy/AGN evolution. Taking advantage of Subaru's wide field of view, which is further extended with the recently completed Wide Field Corrector, PFS will enable us to carry out multi-fiber spectroscopy of 2400 targets within 1.3 degree diameter. A microlens is attached at each fiber entrance for F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. Fibers are accurately placed onto target positions by positioners, each of which consists of two stages of piezo-electric rotary motors, through iterations by using back-illuminated fiber position measurements with a wide-field metrology camera. Fibers then carry light to a set of four identical fast-Schmidt spectrographs with three color arms each: the wavelength ranges from 0.38 μm to 1.3 μm will be simultaneously observed with an average resolving power of 3000. Before and during the era of extremely large telescopes, PFS will provide the unique capability of obtaining spectra of 2400 cosmological/astrophysical targets simultaneously with an 8-10 meter class telescope. The PFS collaboration, led by IPMU, consists of USP/LNA in Brazil, Caltech/JPL, Princeton, & JHU in USA, LAM in France, ASIAA in Taiwan, and NAOJ/Subaru.

astro-ph.IM↗