Searcharxiv⌕ Search

arXiv subjects

Claudio Bruschini

Publications and source records attributed to Claudio Bruschini.

34 records · Page 2Linked to original sources
arXiv2023

Correlated-photon imaging at 10 volumetric images per second

The correlation properties of light provide an outstanding tool to overcome the limitations of traditional imaging techniques. A relevant case is represented by correlation plenoptic imaging (CPI), a quantum-inspired volumetric imaging protocol employing spatio-temporally correlated photons from either entangled or chaotic sources to address the main limitations of conventional light-field imaging, namely, the poor spatial resolution and the reduced change of perspective for 3D imaging. However, the application potential of high-resolution imaging modalities relying on photon correlations is limited, in practice, by the need to collect a large number of frames. This creates a gap, unacceptable for many relevant tasks, between the time performance of correlated-light imaging and that of traditional imaging methods. In this article, we address this issue by exploiting the photon number correlations intrinsic in chaotic light, combined with a cutting-edge ultrafast sensor made of a large array of single-photon avalanche diodes (SPADs). This combination of source and sensor is embedded within a novel single-lens CPI scheme enabling to acquire 10 volumetric images per second. Our results place correlated-photon imaging at a competitive edge and prove its potential in practical applications.

quant-ph↗
arXiv2023

Coupling a Recurrent Neural Network to SPAD TCSPC Systems for Real-time Fluorescence Lifetime Imaging

Fluorescence lifetime imaging (FLI) has been receiving increased attention in recent years as a powerful diagnostic technique in biological and medical research. However, existing FLI systems often suffer from a tradeoff between processing speed, accuracy, and robustness. In this paper, we propose a robust approach that enables fast FLI with no degradation of accuracy. The approach is based on a SPAD TCSPC system coupled to a recurrent neural network (RNN) that accurately estimates the fluorescence lifetime directly from raw timestamps without building histograms, thereby drastically reducing transfer data volumes and hardware resource utilization, thus enabling FLI acquisition at video rate. We train two variants of the RNN on a synthetic dataset and compare the results to those obtained using center-of-mass method (CMM) and least squares fitting (LS fitting). Results demonstrate that two RNN variants, gated recurrent unit (GRU) and long short-term memory (LSTM), are comparable to CMM and LS fitting in terms of accuracy, while outperforming them in background noise by a large margin. To explore the ultimate limits of the approach, we derived the Cramer-Rao lower bound of the measurement, showing that RNN yields lifetime estimations with near-optimal precision. Moreover, our FLI model, which is purely trained on synthetic datasets, works well with never-seen-before, real-world data. To demonstrate real-time operation, we have built a FLI microscope based on Piccolo, a 32x32 SPAD sensor developed in our lab. Four quantized GRU cores, capable of processing up to 4 million photons per second, are deployed on a Xilinx Kintex-7 FPGA. Powered by the GRU, the FLI setup can retrieve real-time fluorescence lifetime images at up to 10 frames per second. The proposed FLI system is promising and ideally suited for biomedical applications.

eess.IV↗
arXiv2023

Large Reconfigurable Quantum Circuits with SPAD Arrays and Multimode Fibers

Reprogrammable linear optical circuits are essential elements of photonic quantum technology implementations. Integrated optics provides a natural platform for tunable photonic circuits, but faces challenges when high dimensions and high connectivity are involved. Here, we implement high-dimensional linear transformations on spatial modes of photons using wavefront shaping together with mode mixing in a multimode fiber, and measure photon correlations using a time-tagging single-photon avalanche diode (SPAD) array. In order to prove the suitability of our approach for quantum technologies we demonstrate two-photon interferences in a tunable complex linear network -- a generalization of a Hong-Ou-Mandel interference to 22 output ports. We study the scalability of our approach by quantifying the similarity between the ideal photon correlations and the correlations obtained experimentally for various linear transformations. Our results demonstrate the potential of wavefront shaping in complex media in conjunction with SPAD arrays for implementing high-dimensional reconfigurable quantum circuits. Specifically, we achieved $(80.5 \pm 6.8)\%$ similarity for indistinguishable photon pairs and $(84.9 \pm 7.0)\%$ similarity for distinguishable photon pairs using 22 detectors and random circuits. These results emphasize the scalability and reprogrammable nature of our approach.

quant-ph↗
arXiv2023

On-chip fully reconfigurable Artificial Neural Network in 16 nm FinFET for Positron Emission Tomography

Smarty is a fully-reconfigurable on-chip feed-forward artificial neural network (ANN) with ten integrated time-to-digital converters (TDCs) designed in a 16 nm FinFET CMOS technology node. The integration of TDCs together with an ANN aims to reduce system complexity and minimize data throughput requirements in positron emission tomography (PET) applications. The TDCs have an average LSB of 53.5 ps. The ANN is fully reconfigurable, the user being able to change its topology as desired within a set of constraints. The chip can execute 363 MOPS with a maximum power consumption of 1.9 mW, for an efficiency of 190 GOPS/W. The system performance was tested in a coincidence measurement setup interfacing Smarty with two groups of five 4 mm x 4 mm analog silicon photomultipliers (A-SiPMs) used as inputs for the TDCs. The ANN successfully distinguished between six different positions of a radioactive source placed between the two photodetector arrays by solely using the TDC timestamps.

eess.SY↗
arXiv2021

Sub-10 ps Minimum Ionizing Particle Detection with Geiger-Mode APDs

Major advances in silicon pixel detectors, with outstanding timing performance, have recently attracted significant attention in the community. In this work we present and discuss the use of state-of-the-art Geiger-mode APDs, also known as single-photon avalanche diodes (SPADs), for the detection of minimum ionizing particles (MIPs) with best-in-class timing resolution. The SPADs were implemented in standard CMOS technology and integrated with on-chip quenching and recharge circuitry. Two devices in coincidence allowed to measure the time-of-flight of 180 GeV/c momentum pions with a coincidence time resolution of 22 ps FWHM (9.5 ps Gaussian sigma). Radiation hardness measurements, also presented here, highlight the suitability of this family of devices for a wide range of high energy physics (HEP) applications.

physics.ins-det↗
arXiv2021

Heralded spectroscopy reveals exciton-exciton correlations in single colloidal quantum dots

Multiply-excited states in semiconductor quantum dots feature intriguing physics and play a crucial role in nanocrystal-based technologies. While photoluminescence provides a natural probe to investigate these states, room temperature single-particle spectroscopy of their emission has so far proved elusive due to the temporal and spectral overlap with emission from the singly-excited and charged states. Here we introduce biexciton heralded spectroscopy, enabled by a single-photon avalanche diode array based spectrometer. This allows us to directly observe biexciton-exciton emission cascades and measure the biexciton binding energy of single quantum dots at room temperature, even though it is well below the scale of thermal broadening and spectral diffusion. Furthermore, we uncover correlations hitherto masked in ensembles, of the biexciton binding energy with both charge-carrier confinement and fluctuations of the local electrostatic potential. Heralded spectroscopy has the potential of greatly extending our understanding of charge-carrier dynamics in multielectron systems and of parallelization of quantum optics protocols.

cond-mat.mes-hall↗
arXiv2021

Resolving the controversy in biexciton binding energy of cesium lead halide perovskite nanocrystals through heralded single-particle spectroscopy

Understanding exciton-exciton interaction in multiply-excited nanocrystals is crucial to their utilization as functional materials. Yet, for lead halide perovskite nanocrystals, which are promising candidates for nanocrystal-based technologies, numerous contradicting values have been reported for the strength and sign of their exciton-exciton interaction. In this work we unambiguously determine the biexciton binding energy in single cesium lead halide perovskite nanocrystals at room temperature. This is enabled by the recently introduced SPAD array spectrometer, capable of temporally isolating biexciton-exciton emission cascades while retaining spectral resolution. We demonstrate that CsPbBr$_3$ nanocrystals feature an attractive exciton-exciton interaction, with a mean biexciton binding energy of 10 meV. For CsPbI$_3$ nanocrystals we observe a mean biexciton binding energy that is close to zero, and individual nanocrystals show either weakly attractive or weakly repulsive exciton-exciton interaction. We further show that within ensembles of both materials, single-nanocrystal biexciton binding energies are correlated with the degree of charge-carrier confinement.

cond-mat.mes-hall↗
arXiv2021

Towards quantum 3D imaging devices: the Qu3D project

We review the advancement of the research toward the design and implementation of quantum plenoptic cameras, radically novel 3D imaging devices that exploit both momentum-position entanglement and photon-number correlations to provide the typical refocusing and ultra-fast, scanning-free, 3D imaging capability of plenoptic devices, along with dramatically enhanced performances, unattainable in standard plenoptic cameras: diffraction-limited resolution, large depth of focus, and ultra-low noise. To further increase the volumetric resolution beyond the Rayleigh diffraction limit, and achieve the quantum limit, we are also developing dedicated protocols based on quantum Fisher information. However, for the quantum advantages of the proposed devices to be effective and appealing to end-users, two main challenges need to be tackled. First, due to the large number of frames required for correlation measurements to provide an acceptable SNR, quantum plenoptic imaging would require, if implemented with commercially available high-resolution cameras, acquisition times ranging from tens of seconds to a few minutes. Second, the elaboration of this large amount of data, in order to retrieve 3D images or refocusing 2D images, requires high-performance and time-consuming computation. To address these challenges, we are developing high-resolution SPAD arrays and high-performance low-level programming of ultra-fast electronics, combined with compressive sensing and quantum tomography algorithms, with the aim to reduce both the acquisition and the elaboration time by two orders of magnitude. Routes toward exploitation of the QPI devices will also be discussed.

quant-ph↗
arXiv2021

Scalable quantum random number generator for cryptography based on the random flip-flop approach

For globally connected devices like smart phones, personal computers and Internet-of-things devices, the ability to generate random numbers is essential for execution of cryptographic protocols responsible for information security. Generally, a random number generator should be small, robust, utilize as few hardware and energy resources as possible, yet provide excellent randomness at a high enough speed (bitrate) for a given purpose. In this work we present a quantum random number generator (QRNG) which makes use of a photoelectric effect in single-photon avalanche diodes (SPADs) as a source of randomness and is scalable to any desired bitrate. We use the random flip-flop method in which random bits are obtained by periodic sampling of a randomly toggling flip-flop. For the first time we investigate this method in detail and find that, out of two main imperfections, bias is due only to hardware imperfections while autocorrelation predominantly resides with the method itself. SPADs are integrated on a silicon chip together with passive quenching and digital pulse-shaping circuitry, using a standard 180 nm CMOS process. A separate FPGA chip derives random numbers from the detection signals. The basic QRNG cell, made of only two SPADs and a few logic circuits, can generate up to 20 Mbit/s that pass NIST statistical tests without any further postprocessing. This technology allows integration of a QRNG on a single silicon chip using readily available industrial processes.

quant-ph↗
arXiv2020

Quanta Burst Photography

Single-photon avalanche diodes (SPADs) are an emerging sensor technology capable of detecting individual incident photons, and capturing their time-of-arrival with high timing precision. While these sensors were limited to single-pixel or low-resolution devices in the past, recently, large (up to 1 MPixel) SPAD arrays have been developed. These single-photon cameras (SPCs) are capable of capturing high-speed sequences of binary single-photon images with no read noise. We present quanta burst photography, a computational photography technique that leverages SPCs as passive imaging devices for photography in challenging conditions, including ultra low-light and fast motion. Inspired by recent success of conventional burst photography, we design algorithms that align and merge binary sequences captured by SPCs into intensity images with minimal motion blur and artifacts, high signal-to-noise ratio (SNR), and high dynamic range. We theoretically analyze the SNR and dynamic range of quanta burst photography, and identify the imaging regimes where it provides significant benefits. We demonstrate, via a recently developed SPAD array, that the proposed method is able to generate high-quality images for scenes with challenging lighting, complex geometries, high dynamic range and moving objects. With the ongoing development of SPAD arrays, we envision quanta burst photography finding applications in both consumer and scientific photography.

cs.CV↗
arXiv2019

A megapixel time-gated SPAD image sensor for 2D and 3D imaging applications

We present the first 1Mpixel SPAD camera ever reported. The camera features 3.8ns time gating and 24kfps frame rate; it was fabricated in 180nm CIS technology. Two pixels have been designed with a pitch of 9.4$μ$m in 7T and 5.75T configurations, respectively, achieving a maximum fill factor of 13.4%. The maximum PDP is 27%, median DCR 2.0cps, variation in gating length 120ps, position skew 410ps, and rise/fall time <550ps, all FWHM at 3.3V of excess bias. The sensor was used to capture 2D/3D scenes over 2m with an LSB of 5.4mm and a precision better than 7.8mm. Extended dynamic range is demonstrated in dual exposure operation mode. Spatially overlapped multi-object detection is experimentally demonstrated in single-photon time-gated ToF for the first time.

eess.IV↗
arXiv2019

Quantum correlation measurement with single photon avalanche diode arrays

Temporal photon correlation measurement, instrumental to probing the quantum properties of light, typically requires multiple single photon detectors. Progress in single photon avalanche diode (SPAD) array technology highlights their potential as high performance detector arrays for quantum imaging and photon number resolving (PNR) experiments. Here, we demonstrate this potential by incorporating a novel on-chip SPAD array with 55% peak photon detection probability, low dark count rate and crosstalk probability of 0.14% per detection, in a confocal microscope. This enables reliable measurements of second and third order photon correlations from a single quantum dot emitter. Our analysis overcomes the inter-detector optical crosstalk background even though it is over an order of magnitude larger than our faint signal. To showcase the vast application space of such an approach, we implement a recently introduced super-resolution imaging method, quantum image scanning microscopy (Q-ISM).

physics.optics↗
arXiv2019

A Bit Too Much? High Speed Imaging from Sparse Photon Counts

Recent advances in photographic sensing technologies have made it possible to achieve light detection in terms of a single photon. Photon counting sensors are being increasingly used in many diverse applications. We address the problem of jointly recovering spatial and temporal scene radiance from very few photon counts. Our ConvNet-based scheme effectively combines spatial and temporal information present in measurements to reduce noise. We demonstrate that using our method one can acquire videos at a high frame rate and still achieve good quality signal-to-noise ratio. Experiments show that the proposed scheme performs quite well in different challenging scenarios while the existing approaches are unable to handle them.

cs.CV↗
arXiv2019

Single-photon SPAD imagers in biophotonics: Review and Outlook

Single-photon avalanche diode (SPAD) arrays are solid-state detectors offering imaging capabilities at the level of individual photons, with unparalleled photon counting and time-resolved performance. This fascinating technology has progressed at very high pace in the past 15~years, since its inception in standard CMOS technology in 2003. A host of architectures has been explored, ranging from simpler implementations, based solely on off-chip data processing, to progressively ``smarter" sensors including on-chip, or even pixel-level, timestamping and processing capabilities. As the technology matured, a range of biophotonics applications has been explored, including (endoscopic) FLIM, (multi-beam multiphoton) FLIM-FRET, SPIM-FCS, super-resolution microscopy, time-resolved Raman, NIROT, and PET. We will review some representative sensors and their corresponding applications, including the most relevant challenges faced by chip designers and end-users. Finally, we will provide an outlook on the future of this fascinating technology.

physics.ins-det↗
arXiv2018

Cryogenic Characterization of 28 nm Bulk CMOS Technology for Quantum Computing

This paper presents the first experimental investigation and physical discussion of the cryogenic behavior of a commercial 28 nm bulk CMOS technology. Here we extract the fundamental physical parameters of this technology at 300, 77 and 4.2 K based on DC measurement results. The extracted values are then used to demonstrate the impact of cryogenic temperatures on the essential analog design parameters. We find that the simplified charge-based EKV model can accurately predict the cryogenic behavior. This represents a main step towards the design of analog/RF circuits integrated in an advanced bulk CMOS process and operating at cryogenic temperature for quantum computing control systems.

cond-mat.mes-hall↗