arXiv subjects

Claudio Guarcello

Publications and source records attributed to Claudio Guarcello.

At least 37 records · Page 2Linked to original sources

arXiv2024

Engineered Josephson diode effect in kinked Rashba nanochannels

The superconducting diode effect, reminiscent of the unidirectional charge transport in semiconductor diodes, is characterized by a nonreciprocal, dissipationless flow of Cooper pairs. This remarkable phenomenon arises from the interplay between symmetry constraints and the inherent quantum behavior of superconductors. Here, we explore the geometric control of the diode effect in a kinked nanostrip Josephson junction based on a two-dimensional electron gas (2DEGs) with Rashba spin-orbit interaction. We provide a comprehensive analysis of the diode effect as a function of the kink angle and the out-of-plane magnetic field. Our analysis reveals a rich phase diagram, showcasing a geometry and field-controlled diode effect. The phase diagram also reveals the presence of an anomalous Josephson effect related to the emergence of trivial zero-energy Andreev bound states, which can evolve into Majorana bound states. Our findings indicate that the exceptional synergy between geometric control of the diode effect and topological phases can be effectively leveraged to design and optimize superconducting devices with tailored transport properties.

cond-mat.supr-con↗

arXiv2024

Comment on "Non-reciprocal topological solitons in active metamaterials"

In the recent work "Non-reciprocal topological solitons in active metamaterials" (see arXiv:2312.03544v1), for an analytical understanding of the system under consideration, the authors derive an ordinary differential equation for the sine-Gordon (anti)soliton velocity, with the perturbation theory in the adiabatic approximation, via the inverse scattering transform formalism, see Eq. (3) in their work. Here we note that the latter equation for the (anti)soliton velocity also follows from an energy balance approach.

nlin.PS↗

arXiv2024

Nonlinear Behavior of Josephson Traveling Wave Parametric Amplifiers

Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generation-effects that are not easily accommodated by simplistic linearized approaches

cond-mat.supr-con↗

arXiv2024

Broadband parametric amplification in DARTWARS

Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth, a feature lacking in Josephson Parametric Amplifiers (JPAs), despite the latter being a more established technology. This paper presents recent developments of the DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project, focusing on the latest prototypes of Kinetic Inductance TWPAs (KITWPAs). The project aims to develop a KITWPA capable of achieving $20\,$ dB of amplification. To enhance the production yield, the first prototypes were fabricated with half the length and expected gain of the final device. In this paper, we present the results of the characterization of one of the half-length prototypes. The measurements revealed an average amplification of approximately $9\,$dB across a $2\,$GHz bandwidth for a KITWPA spanning $17\,$mm in length.

quant-ph↗

arXiv2024

Development of KI-TWPAs for the DARTWARS project

Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.

quant-ph↗

arXiv2024

Design and simulation of a transmon qubit chip for Axion detection

Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power.

quant-ph↗

arXiv2023

Switching current distributions in ferromagnetic anomalous Josephson junctions

We investigate the switching current distributions of ferromagnetic anomalous Josephson junctions subjected to a linearly increasing bias current. Our study uncovers a significant correlation between the position of the switching current distributions and crucial system parameters, such as the strength of the spin-orbit coupling and the Gilbert damping parameter. This indicates that these parameters can be directly determined through experimental measurements. By conducting a comprehensive analysis of the interplay among noise, magnetization, phase dynamics, and the statistical properties of the switching current distribution, we deepen our understanding of these intriguing cryogenic spintronics devices. These findings hold potential for applications in the field of quantum computing architectures and information processing technologies.

cond-mat.supr-con↗

arXiv2023

Bipolar thermoelectrical SQUIPT (BTSQUIPT)

We theoretically study the quasiparticle current behaviour of a thermally-biased bipolar thermoelectrical superconducting quantum interference proximity transistor, formed by a normal metal wire embedded in a superconducting ring and tunnel-coupled to a superconducting probe. In this configuration, the superconducting gap of the wire can be modified through an applied magnetic flux. We analyse the thermoelectric response as a function of magnetic flux, at fixed temperatures, in the case of a device made of the same superconductor. We demonstrate magnetically controllable, bipolar thermoelectric behaviour and discuss optimal working conditions by looking at the thermoelectric power and other figures of merit of the device.

cond-mat.supr-con↗

arXiv2023

Thermoelectric signatures of order-parameter symmetries in iron-based superconducting tunnel junctions

Thermoelectrical properties are frequently used to characterize the materials and endow the free energy from wasted heat for useful purposes. Here, we show that linear thermoelectric effects in tunnel junctions with Fe-based superconductors, not only address the dominance between particle and hole states, but even provide information about the superconducting order parameter symmetry. In particular, we observe that nodal order parameters present a maximal thermoelectric effect at lower temperatures than for nodeless cases. Furthermore, we show also that superconducting tunnel junctions between Fe-based and BCS superconductors could provide a thermoelectric efficiency ZT exceeding 6 with a linear Seebeck coefficient around $S\approx 800\;μ\text{V/K}$ at a few Kelvin. These results pave the way to novel thermoelectric machines based on multi-band superconductors.

cond-mat.supr-con↗

arXiv2023

Axion field influence on Josephson junction quasipotential

The direct effect of an axion field on Josephson junctions is analyzed through the consequences on the effective potential barrier that prevents the junction from switching from the superconducting to the finite-voltage state. We describe a method to reliably compute the quasipotential with stochastic simulations, which allows to span the coupling parameter from weakly interacting axion to tight interactions. As a result, we obtain that the axion field induces a change in the potential barrier, therefore determining a significant detectable effect for such a kind of elusive particle.

hep-ph↗

arXiv2023

Noise-induced, ac-stabilized sine-Gordon breathers: Emergence and statistics

Noisy and ac forcing can cooperatively lead to the emergence of sine-Gordon breathers robust to dissipation. This phenomenon is studied, for both Neumann and periodic boundary conditions (NBC and PBC, respectively), at different values of the main system parameters, such as the noise intensity and the ac frequency-amplitude pair. In all the considered cases, nonmonotonicities of the probability of generating only breathers versus the noise strength are observed, implying that optimal noise ranges for the breather formation process exist. Within the latter scenarios, the statistics of the breathers' number, position, and amplitude are analyzed. The number of breathers is found to grow, on average, with the noise amplitude. The breathers' spatial distribution is sharply peaked at the system's edges for NBC, whereas it is essentially uniform for PBC. The average breather amplitude is dictated by the ac frequency-amplitude pair. Finally, a size analysis shows that the minimum system length for the generation mechanism is given by the typical breather half-width (width) in NBC (PBC).

cond-mat.mes-hall↗

arXiv2023

Heat-transfer fingerprint of Josephson breathers

A sine-Gordon breather enhances the heat transfer in a thermally biased long Josephson junction. This solitonic channel allows for the tailoring of the local temperature throughout the system. Furthermore, the phenomenon implies a clear thermal fingerprint for the breather, and thus a 'non-destructive' breather detection strategy is proposed here. Distinct breathing frequencies result in morphologically different local temperature peaks, which can be identified in an experiment.

cond-mat.mes-hall↗

arXiv2023

ac-locking of thermally-induced sine-Gordon breathers

A complete framework for exciting and detecting thermally-induced, stabilized sine-Gordon breathers in ac-driven long Josephson junctions is developed. The formation of long-time stable breathers locked to the ac source occurs for a sufficiently high temperature. The latter emerges as a powerful control parameter, allowing for the remarkably stable localized modes to appear. Nonmonotonic behaviors of both the breather generation probability and the energy spatial correlations versus the thermal noise strength are found. The junction's resistive switching characteristics provides a clear experimental signature of the breather.

cond-mat.mes-hall↗

arXiv2022

Hallmarks of non-trivial topology in Josephson junctions based on oxide nanochannels

We investigate the topological properties of a Josephson junction obtained by constraining a two-dimensional electron gas at oxide interface to form a quasi-1D conductor. We reveal an anomalous critical current behaviour with a magnetic field applied perpendicular to the Rashba spin-orbit one. We relate the observed critical current enhancement at small magnetic fields with a non-trivial topology, accompanied by Majorana bound states (MBSs) pinned at the edges of the superconducting leads. Signatures of MBSs also include a sawtooth profile in the current-phase relation. Our findings allow to recognize fingerprints of topological superconductivity in non-centrosymmetric materials and confined systems with Rashba spin-orbit interaction, and to explain recent experimental observations for which a microscopic description is still lacking.

cond-mat.mes-hall↗

arXiv2022

Temperature-biased double-loop Josephson flux transducer

We theoretically study the behavior of the critical current of a thermally-biased tunnel Josephson junction with a particular design, in which the electrodes of the junction are enclosed in two different superconducting loops pierced by independent magnetic fluxes. In this setup, the superconducting gaps can be modified independently through the magnetic fluxes threading the loops. We investigate the response of the device as a function of the magnetic fluxes, by changing the asymmetry parameter, i.e., the ratio between the zero-temperature superconducting gaps $δ=Δ_{10}/Δ_{20}$, and the temperatures of the two rings. We demonstrate a magnetically controllable step-like response of the critical current, which emerges even in a symmetric junction, $δ=1$. Finally, we discuss the optimal working conditions and the high response of the critical current to small changes in the magnetic flux, reporting good performances of the transducer, with a high transfer function that depends on the operating point and the quality of the junction.

cond-mat.supr-con↗

arXiv2022

Sine-Gordon breathers generation in driven long Josephson junctions

We consider a long Josephson junction excited by a suitable external ac-signal, in order to generate control and detect breathers. Studying the nonlinear supratransmission phenomenon in a nonlinear sine-Gordon chain sinusoidally driven, Geniet and Leon explored the bifurcation of the energy transmitted into the chain and calculated a threshold $A (ω)$ for the external driving signal amplitude, at which the energy flows into the system by breathers modes. I numerically study the continuous sine-Gordon model, describing the dynamics of the phase difference in a long Josephson junction, in order to deeply investigate the "continuous limit" modifications to this threshold. Wherever the energy flows into the system due to the nonlinear supratransmission, a peculiar breather localization areas appear in a $(A, ω)$ parameters space. The emergence of these areas depends on the damping parameter value, the bias current, and the waveform of driving external signal. The robustness of generated breathers is checked by introducing into the model a thermal noise source to mimic the environmental fluctuations. Presented results allows one to consider a cryogenic experiment for creation and detection of Josephson breathers.

cond-mat.supr-con↗

arXiv2022

Breather dynamics in a stochastic sine-Gordon equation: evidence of noise-enhanced stability

The dynamics of sine-Gordon breathers is studied in the presence of dissipative and stochastic perturbations. Taking a stationary breather with a random phase value as the initial state, the performed simulations demonstrate that a spatially-homogeneous noisy source can make the oscillatory excitation more stable, i.e., it enables the latter to last significantly longer than it would in a noise-free scenario. Both the frequency domain and the localization of energy are examined to document the effectiveness of the noise-enhanced stability phenomenon, which emerges as a nonmonotonic behavior of an average characteristic time for the breather as a function of the noise intensity. The influence of the mode's starting frequency on the results and their robustness against an additional thermal background are also addressed.

nlin.PS↗

arXiv2022

Supratransmission-induced travelling breathers in long Josephson junctions

The emergence of travelling sine-Gordon breathers due to the nonlinear supratransmission effect is theoretically studied in a long Josephson junction driven by suitable magnetic pulses, taking into account the presence of dissipation, a current bias, and a thermal noise source. The simulations clearly indicate that, depending on the pulse's shape and the values of the main system parameters, such a configuration can effectively yield breather excitations only. Furthermore, a nonmonotonic behavior of the breather-only generation probability is observed as a function of the noise intensity. Finally, the dynamics of the supratransmission-induced breathers is characterized by looking at quantities such as their radiative decay lifetime and the medium's energy.

cond-mat.mes-hall↗