arXiv subjects

Clayton Heller

Publications and source records attributed to Clayton Heller.

At least 19 recordsLinked to original sources

arXiv2024

Metal-Poor Stars in the MW Disk: Resonant Cooling of Vertical Oscillations of Halo Stars in Barred Galaxies

Using numerical simulations of barred disk galaxy embedded in nonspinning and spinning dark matter (DM) halos, we present a novel mechanism of `cooling' the vertical oscillations of DM particles, which acquire the disk kinematics. The underlying mechanism consists of resonant interactions between halo particles and the stellar bar, facilitated by chaotic phase space of the system. The cooling mechanism acts both on dynamical and secular timescales, from $\sim 0.5$\,Gyr to few Gyr. The stellar bar acts to absorb kinetic energy of the vertical motions. Using Milky Way-type stellar halo, we estimate the population of metal-poor disk stars trapped by the MW disk and analyze its kinematics. We find that population of metal-poor MW disk stars with $|z|\ltorder 3$\,kpc detected by the Gaia DR3 and other surveys can have their origin in the stellar halo. The cooled population also migrates radially outwards by exchanging energy and angular momentum with the spinning bar, and prograde-moving stars have a different distribution from the retrograde ones. Next, we have calculated the ratio of the prograde-to-retrograde orbits of the cooled population and found that this ratio varies radially, with the fast-spinning stellar halo resulting in the shallower radial increase of this ratio outside of the corotation. The nonspinning stellar halo shows a monotonic increase of this ratio with radius outside the corotation. Together with analyzed radial migration of these halo stars, the cooling phenomenon of halo metal-poor stars can explain their current disk population, and has corollaries for chemical evolution of disk galaxies in general.

astro-ph.GA↗

arXiv2023

Evolution of Stellar Bars in Spinning Dark Matter Halos and Stellar Bulges

We use high-resolution numerical simulations to follow the barred disk evolution in a suite of models with progressively more massive stellar bulges, with bulge-to-total (disk$+$bulge) mass ratios of $B/T\sim 0-0.25$, embedded in dark matter (DM) halos with the spin $λ\sim 0 - 0.09$. We focus on models with a sequence of initial rotational support for bulges, and analyze their spinup and spindown. We find that (1) the presence of a bulge affects the evolution of stellar bars, i.e., the timescale of bar instability, bar pattern speed and its decay, and the vertical buckling instability. The bar strength is nearly independent of $B/T$ in halos with spin $λ= 0$, and is suppressed by a factor $\sim 2$ for halos with $λ= 0.09$; (2) The main effect of the bulge is the destruction of the harmonic core which affects the buckling; (3) The bulge plays a minor role in the exchange of angular momentum between the barred disk and the DM halo, during its spinup and spindown; (4) Most interestingly, the buckling process triggers different response above/below the disk midplane, which anti-correlates with the bulge mass; (5) In spinning halos, the buckling process has a prolonged amplitude tail, extending by few Gyr, as verified by measuring distortions in the Laplace plane; (6) Furthermore, as verified by orbital spectral analysis, the bulge gains its spin from the bar mainly via the inner Lindblad resonance, while losing it via a number of resonances lying between the outer and inner Lindblad resonance.

astro-ph.GA↗

arXiv2023

Stellar Bars in Spinning Halos: Delayed Buckling and Absence of Slowdown

We use high resolution numerical simulations in order to analyze the stellar bar evolution in spinning dark matter (DM) halos. Previous works have shown that the halo spin has a substantial effect on the bar evolution and can lead to bar dissolution following the vertical buckling instability. Here, we invoke the DM spin sequence, $λ=0-0.09$, and study the effect of DM density along this $λ$-sequence by varying the compactness of DM halo. We find that (1) varying the DM density has a profound effect on the stellar bar evolution along the $λ$-sequence, namely, on its amplitude, pattern speed, buckling time, etc.; (2) For $λ\gtrsim 0.04$, the buckling instability has been delayed progressively, and does not occur when the bar has reached its maximal strength; (3) Instead, stellar bars remain near maximal strength, and their amplitude plateau stage extends over $\sim 1-7$ Gyr, terminating with the buckling instability; (4) Although stellar bars remain strong during the plateau, their pattern speed stays nearly constant. The reason for this unusual behavior of stellar bars follows from the highly reduced gravitational torques which they experience due to the DM bar being aligned with the stellar bar. The performed orbital analysis shows that the delayed buckling results from a slow evolution of stellar oscillations along the bar major and vertical axes -- thus postponing the action of the vertical 2:1 resonance which pumps the rotational energy into vertical motions; (5) Peanut/boxy shaped bulges form at the beginning of the plateau and grow with time; (6) Strong stellar bars in spinning halos can avoid fast braking, resolving the long standing discrepancy between observations and $N$-body simulations. This behavior of stellar bars along the $λ$- and DM density-sequences, reveals a wealth of stellar bar properties which require additional study.

astro-ph.GA↗

arXiv2023

The Origin of Buckling Instability in Galactic Bars: Searching for the Scapegoat

The buckling process in stellar bars is full of unsolved issues. We analyze the origin of the buckling instability in stellar bars using high-resolution N-body simulations. Previous studies have promoted the nonresonant firehose instability to be responsible for the vertical buckling. We have analyzed the buckling process in terms of the resonant excitation of stellar orbits in the bar, which pumps energy into vertical oscillations. We find that (1) the buckling is associated with an abrupt increase in the central mass concentration and triggers velocities along the bar and along its rotation axis. The velocity field projected on one of the main axes forms circulation cells and increases vorticity, which are absent in firehose instability; (2) The bending amplitude is nonlinear when measured by isodensity contours or curvature of the Laplace plane, which has a substantial effect on the stellar motions; (3) In the linear description, the planar and vertical 2:1 resonances appear only with the buckling and quickly reach the overlapping phase, thus supporting the energy transfer; (4) Using nonlinear orbit analysis, we analyze the stellar oscillations along the bar and along the rotation axis and find that stars cross the vertical 2:1 resonance simultaneously with the buckling. The overlapping planar and vertical 2:1 resonances trapping more than 25% of the bar particles provide the 'smoking gun' pointing to a close relationship between the bending of stellar orbits and the resonant action -- these particles provide the necessary ingredient assuring the cohesive response in the growing vertical asymmetry. We conclude that resonant excitation is important in triggering the buckling instability, and the contribution from the firehose instability should be reevaluated. Finally, we discuss some observational implications of buckling.

astro-ph.GA↗

arXiv2020

Producing flow in "racetrack" atom circuits by stirring at zero and non-zero temperature

We present a study of how macroscopic flow can be produced in Bose-Einstein condensate confined in a "racetrack" potential by stirring with a wide rectangular barrier. This potential consists of two half-circle channels separated by straight channels of length $L$ and is a ring potential if $L=0$. We present the results of a large set of simulations where racetrack condensates stirred with a barrier under varying conditions of barrier height, stir speed, racetrack geometry, and temperature. We found that stirring was readily able to produce circulation in ring and non-ring geometries but that the exact amount of flow produced was complicated. We therefore also studied the mechanism by which flow was produced in the stirring process. We found that circulation was induced by the swap of a vortex/anti-vortex pair that was initially created by backflow of the condensate in the region of depressed density by the barrier. When the barrier strength reached a critical value a number of these vortex-swap events occurred in rapid succession so that flow speed of the circulation produced was enough to exceed the stir speed of the barrier. Flow that was initially localized in the vortices involved in the vortex swap was converted into macroscopic flow around the racetrack by pairs of disturbances each generated during the vortex swap. Each pair consisted of a vortex/anti-vortex pair moving in the anti-stir direction and a compression wave moving in the stir direction. This picture of the mechanism for making flow will enable the design of stirring schedules that create a desired amount of flow.

cond-mat.quant-gas↗

arXiv2019

Stellar Bars in Counter-Rotating Dark Matter Halos: The Role of Halo Orbit Reversals

Disk galaxies can exchange angular momentum and baryons with their host dark matter (DM) halos. These halos possess internal spin, `lambda', which is insignificant rotationally but does affect interactions between the baryonic and DM components. While statistics of prograde and retrograde spinning halos in galaxies is not available at present, the existence of such halos is important for galaxy evolution. In the previous works, we analyzed dynamical and secular evolution of stellar bars in prograde spinning halos and the DM response to the bar perturbation, and found that it is modified by the resonant interactions between the bar and the DM halo orbits. In the present work, we follow the evolution of stellar bars in retrograde halos. We find, that this evolution differs substantially from evolution in rigid unresponsive halos, discussed in the literature. First, we confirm that the bar instability is delayed progressively along the retrograde `lambda' sequence. Second, the bar evolution in the retrograde halos differs also from that in the prograde halos, in that the bars continue to grow substantially over the simulation time of 10 Gyr. The DM response is also substantially weaker compared to this response in the prograde halos. Third, using orbital spectral analysis of the DM orbital structure, we find a phenomenon we call the orbit reversal --- when retrograde DM orbits interact with the stellar bar, reverse their streaming and precession, and become prograde. This process dominates the inner halo region adjacent to the bar and allows these orbits to be trapped by the bar, thus increasing efficiency of angular momentum transfer by the Inner Lindblad Resonance. We demonstrate this reversal process explicitly in a number of examples.

astro-ph.GA↗

arXiv2019

Dark Matter Bars in Spinning Halos

We study nonlinear response of spinning dark matter (DM) halos to dynamic and secular evolution of stellar bars in the embedded galactic disks, using high-resolution numerical simulations. For a sequence of halos with the cosmological spin parameter lambda=0-0.09, and a representative angular momentum distribution, we analyze evolution of induced DM bars amplitude and quantify parameters of the response as well as trapping of DM orbits and angular momentum transfer by the main and secondary resonances. We find that (1) maximal amplitude of DM bars depends strongly on `lambda', while that of the stellar bars is indifferent to `lambda'; (2) Efficiency of resonance trapping of DM orbits by the bar increases with `lambda', and so is the mass and the volume of DM bars; (3) Contribution of resonance transfer of angular momentum to the DM halo increases with `lambda', and for larger spin, the DM halo `talks' to itself, by moving the angular momentum to larger radii --- this process is maintained by resonances; (4) Prograde and retrograde DM orbits play different roles in angular momentum transfer. The `active' part of the halo extends well beyond the bar region, up to few times the bar length in equatorial plane and away from this plane. (5) We model evolution of diskless DM halos and halos with frozen disks, and found them to be perfectly stable to any Fourier modes. Finally, further studies adopting a range of mass and specific angular momentum distributions of the DM halo will generalize the dependence of DM response on the halo spin and important implications for direct detection of DM and that of the associated stellar tracers, such as streamers.

astro-ph.GA↗

arXiv2018

What Makes the Family of Barred Disc Galaxies So Rich: Damping Stellar Bars in Spinning Haloes

We model and analyse the secular evolution of stellar bars in spinning dark matter (DM) haloes with the cosmological spin lambda ~ 0 -- 0.09. Using high-resolution stellar and DM numerical simulations, we focus on angular momentum exchange between stellar discs and DM haloes of various axisymmetric shapes --- spherical, oblate and prolate. We find that stellar bars experience a diverse evolution which is guided by the ability of parent haloes to absorb angular momentum lost by the disc through the action of gravitational torques, resonant and non-resonant. We confirm the previous claim that dynamical bar instability is accelerated via resonant angular momentum transfer to the halo. Our main findings relate to the long-term, secular evolution of disc-halo systems: with an increasing lambda, bars experience less growth and dissolve after they pass through the vertical buckling instability. Specifically, with an increasing halo spin, (1) The vertical buckling instability in stellar bars colludes with inability of the inner halo to absorb angular momentum --- this emerges as the main factor weakening or destroying bars in spinning haloes; (2) Bars lose progressively less angular momentum, and their pattern speeds level off; (3) Bars are smaller, and for lambda >= 0.06 cease their growth completely following buckling; (4) Bars in lambda > 0.03 haloes have ratio of corotation-to-bar radii, R_CR / R_b > 2, and represent so-called slow bars which do not show offset dust lanes. We provide a quantitative analysis of angular momentum transfer in disc-halo systems, and explain the reasons for absence of growth in fast spinning haloes and its observational corollaries. We conclude that stellar bar evolution is substantially more complex than anticipated, and bars are not as resilient as has been considered so far.

astro-ph.GA↗

arXiv2014

Secular Damping of Stellar Bars in Spinning Dark Matter Halos

We demonstrate that growth of stellar bars in spinning dark matter halos is heavily suppressed in the secular phase of evolution, using numerical simulations of isolated galaxies. In a representative set of models, we show that for values of the cosmological spin parameter lambda > 0.03, bar growth (in strength and size) becomes increasingly quenched. Furthermore, slowdown of bar pattern speed weakens substantially with increasing `lambda,' until it ceases completely. The terminal structure of bars is affected as well, including extent and shape of their boxy/peanut bulges. The essence of this effect lies in the modified angular momentum exchange between the disk and the halo facilitated by the bar. For the first time we have demonstrated that a dark matter halo can emit and not purely absorb angular momentum. Although the halo as a whole is not found to emit, the net transfer of angular momentum from the disk to the halo is significantly reduced or completely eliminated. The paradigm shift implies that the accepted view that disks serve as sources of angular momentum and halos serve as sinks, must be revised. Halos with lambda > 0.03 are expected to form a substantial fraction, based on lognormal distribution of lambda. Dependence of secular bar evolution on halo spin, therefore, implies profound corollaries for the cosmological evolution of galactic disks.

astro-ph.GA↗

arXiv2010

Dark Matter Halos and Evolution of Bars in Disk Galaxies: Varying Gas Fraction and Gas Spatial Resolution

We conduct numerical experiments by evolving gaseous/stellar disks embedded in live dark matter halos aiming at quantifying the effect of gas spatial resolution and gas content on the bar evolution. Model sequences have been constructed using different resolution, and gas fraction has been varied along each sequence within fgas=0%-50%, keeping the disk and halo properties unchanged. We find that the spatial resolution becomes important with an increase in `fgas'. For the higher resolution model sequences, we observe a bimodal behavior in the bar evolution with respect to the gas fraction, especially during the secular phase of this evolution. The switch from the gas-poor to gas-rich behavior is abrupt and depends on the resolution used. The diverging evolution has been observed in nearly all basic parameters characterizing bars, such as the bar strength, central mass concentration, vertical buckling amplitude, size, etc. We find that the presence of the gas component severely limits the bar growth and affects its pattern speed evolution. Gas-poor models display rapidly decelerating bars, while gas-rich models exhibit bars with constant or even slowly accelerating tumbling. The gas-rich models have bar corotation (CR) radii within the disk at all times, in constrast with gas-poor and purely stellar disks. The CR-to-bar size ratio is less than 2 for gas rich-models. We have confirmed that the disk angular momentum within the CR remains unchanged in the gas-poor models, as long as the CR stays within the disk, but experiences a sharp drop before leveling off in the gas-rich models. Finally, we discuss a number of observed correlations between various parameters of simulated bars, e.g., bar sizes and gas fractions, bar strength and buckling amplitude, bar strength and its size, etc.

astro-ph.CO↗

arXiv2010

Dissecting Galaxy Formation: II. Comparing Substructure in Pure Dark Matter and Baryonic Models

We compare the substructure evolution in pure dark matter (DM) halos with those in the presence of baryons (PDM and BDM). The prime halos have been analyzed by Romano-Diaz et al (2009). Models have been evolved from identical initial conditions using Constrained Realizations, including star formation and feedback. A comprehensive catalog of subhalos has been compiled and properties of subhalos analyzed in the mass range of 10^8 Mo - 10^11 Mo. We find that subhalo mass functions are consistent with a single power law, M_sbh^{alpha}, but detect a nonnegligible shift between these functions, alpha -0.86 for the PDM, and -0.98 for the BDM. Overall, alpha const. in time with variations of +-15%. Second, we find that the radial mass distribution of subhalos can be approximated by a power law, R^{gamma} with a steepening around the radius of a maximal circular velocity, Rvmax, in the prime halos. Gamma ~-1.5 for the PDM and -1 for the BDM, inside Rvmax, and is steeper outside. We detect little spatial bias between the subhalo populations and the DM of the main halos. The subhalo population exhibits much less triaxiality with baryons, in tandem with the prime halo. Finally, we find that, counter-intuitively, the BDM population is depleted at a faster rate than the PDM one within the central 30kpc of the prime. Although the baryons provide a substantial glue to the subhalos, the main halos exhibit the same trend. This assures a more efficient tidal disruption of the BDM subhalos. This effect can be reversed for a more efficient feedback from stellar evolution and supermassive black holes, which will expel baryons from the center and decrease the concentration of the prime halo. We compare our results with via Lactea and Aquarius simulations and other published results.

astro-ph.CO↗

arXiv2009

Dark Matter Halos and Evolution of Bars in Disk Galaxies: Collisionless Models Revisited

We construct and evolve families of steady-state models of stellar disks embedded in live DM halos, in order to study the dynamical and secular phases of bar evolution. These models are tested against those published in the literature in order to extend them and include the gaseous component in the follow up paper. We are interested in the angular momentum (J) redistribution in the disk-halo system. We confirm the previous results and quantify for the first time the dual role that the DM halos play in the bar evolution: more centrally concentrated halos dilute the dynamical processes, such as spontaneous bar instability and vertical buckling instability, and slowdown the J transfer, while facilitating it in the secular phase. Within the corotation radius (Rcr), the disk J remains nearly constant, as long as Rcr stays within the disk -- a sign that the lost J to the outer disk and the halo is being compensated by an influx of fresh J due to the outward motion of Rcr. This is feasible as long as the bar slowdown dominates the loss of J inside Rcr. We find that in some models the bar pattern speed stalls for prolonged time periods when Rcr is located outside the disk. This phenomenon appears concurrent with the near absence of J transfer between the disk and the halo. Furthermore, we confirm that stellar bars generally display the corotation to bar size ratios in the range of ~1-1.4, but only between the times of the first buckling and Rcr leaving the disk. The corotation-to-disk size ratio emerges as an important dynamic discriminator between various stages of barred disk evolution. Finally, we analyze a number of correlations between the basic parameters of a barred disk and a halo, some already reported in the literature and some new.

astro-ph.CO↗

arXiv2009

Dissecting Galaxy Formation: I. Comparison Between Pure Dark Matter and Baryonic Models

We compare assembly of DM halos with and without baryons, within the context of cosmological evolution in the LCDM WMAP3 Universe (baryons+DM, BDM model, and pure DM, PDM model). In representative PDM and BDM models we find that baryons contribute decisively to the evolution of the central region, leading to an isothermal DM cusp, and to a flat DM density core -- the result of heating by dynamical friction of the substructure during a quiescent evolution epoch. This process ablates the cold gas from an embedded disk, cutting the star formation rate by ~10, and heats up the spheroidal gas and stellar components, triggering their expansion. The substructure is more resilient in the presence of baryons. The disk which formed from inside-out as gas dominated, is transformed into an intermediate Hubble type by z ~ 2 and to an early type by z ~ 0.5, based on its gas contents and spheroidal-to-disk stellar mass ratio. Only a relatively small ~20% fraction of DM particles in PDM and BDM models are bound within the radius of maximal circular velocity in the halo -- most of the DM particles perform larger radial excursions. We also find that the fraction of baryons within the halo virial radius somewhat increases during the major mergers and decreases during the minor mergers. The net effect appears to be negligible. While the substructure is being tidally-disrupted, mixing of its debris in the halo is not efficient and becomes even less so with z. The streamers formed after z ~ 1 survive largely to the present time -- an important implication for embedded disk evolution.

astro-ph.CO↗

arXiv2008

Disk Evolution and Bar Triggering Driven by Interactions with Dark Matter Substructure

We study formation and evolution of bar-disk systems in fully self-consistent cosmological simulations of galaxy formation in the LCDM WMAP3 Universe. In a representative model we find that the first generation of bars form in response to the asymmetric dark matter (DM) distribution (i.e., DM filament) and quickly decay. Subsequent bar generations form and are destroyed during the major merger epoch permeated by interactions with a DM substructure (subhalos). A long-lived bar is triggered by a tide from a subhalo and survives for ~10 Gyr. The evolution of this bar is followed during the subsequent numerous minor mergers and interactions with the substructure. Together with intrinsic factors, these interactions largely determine the stellar bar evolution. The bar strength and its pattern speed anticorrelate, except during interactions and when the secondary (nuclear) bar is present. For about 5 Gyr bar pattern speed increases substantially despite the loss of angular momentum to stars and cuspy DM halo. We analyze the evolution of stellar populations in the bar-disk and relate them to the underlying dynamics. While the bar is made mainly of an intermediate age, ~5-6 Gyr, disk stars at z=0, a secondary nuclear bar which surfaces at z~0.1 is made of younger, ~1-3 Gyr stars.

astro-ph↗

arXiv2008

Erasing Dark Matter Cusps in Cosmological Galactic Halos with Baryons

We study the central dark matter (DM) cusp evolution in cosmological galactic halos. Models with and without baryons (baryons+DM, hereafter BDM model, and pure DM, PDM model, respectively) are advanced from identical initial conditions. The DM cusp properties are contrasted by a direct comparison of pure DM and baryonic models. We find a divergent evolution between the PDM and BDM models within the inner ~10 kpc region. The PDM model forms a R^{-1} cusp as expected, while the DM in the BDM model forms a larger isothermal cusp R^{-2} instead. The isothermal cusp is stable until z~1 when it gradually levels off. This leveling proceeds from inside out and the final density slope is shallower than -1 within the central 3 kpc (i.e., expected size of the R^{-1} cusp), tending to a flat core within ~2 kpc. This effect cannot be explained by a finite resolution of our code which produces only a 5% difference between the gravitationally softened force and the exact Newtonian force of point masses at 1 kpc from the center. Neither is it related to the energy feedback from stellar evolution or angular momentum transfer from the bar. Instead it can be associated with the action of DM+baryon subhalos heating up the cusp region via dynamical friction and forcing the DM in the cusp to flow out and to `cool' down. The process described here is not limited to low z and can be efficient at intermediate and even high z.

astro-ph↗

arXiv2007

Structure Formation Inside Triaxial Dark Matter Halos: Galactic Disks, Bulges and Bars

We investigate the formation and evolution of galactic disks immersed in assembling live DM halos. Disk/halo components have been evolved from the cosmological initial conditions and represent the collapse of an isolated density perturbation. The baryons include gas (which participates in star formation [SF]) and stars. The feedback from the stellar energy release onto the ISM has been implemented. We find that (1) The growing triaxial halo figure tumbling is insignificant and the angular momentum (J) is channeled into the internal circulation; (2) Density response of the disk is out of phase with the DM, thus diluting the inner halo flatness and washing out its prolateness; (3) The total J is neathly conserved, even in models accounting for feedback; (4) The specific J for the DM is nearly constant, while that for baryons is decreasing; (5) Early stage of disk formation resembles the cat's cradle -- a small amorphous disk fueled via radial string patterns; (6) The initially puffed up gas component in the disk thins when the SF rate drops below ~5 Mo/yr; (7) About 40%-60% of the baryons remain outside the SF region; (8) Rotation curves appear to be flat and account for the observed disk/halo contributions; (9) A range of bulge-dominated to bulgeless disks was obtained; Lower density threshold for SF leads to a smaller, thicker disk; Gravitational softening in the gas has a substantial effect on various aspects of galaxy evolution and mimics a number of intrinsic processes within the ISM; (10) The models are characterized by an extensive bar-forming activity; (11) Nuclear bars, dynamically coupled and decoupled form in response to the gas inflow along the primary bars.

astro-ph↗

arXiv2007

Evolution of Phase-Space Density in Dark Matter Halos

The evolution of the phase-space density profile in dark matter (DM) halos is investigated by means of constrained simulations, designed to control the merging history of a given DM halo. Halos evolve through a series of quiescent phases of a slow accretion intermitted by violent events of major mergers. In the quiescent phases the density of the halo closely follows the NFW profile and the phase-space density profile, Q(r), is given by the Taylor & Navarro power law, r^{-beta}, where beta ~ 1.9 and stays remarkably stable over the Hubble time. Expressing the phase-space density by the NFW parameters, Q(r)=Qs (r/Rs)^{-beta}, the evolution of Q is determined by Qs. We have found that the effective mass surface density within Rs, Sigma_s = rhos Rs, remains constant throughout the evolution of a given DM halo along the main branch of its merging tree. This invariance entails that Qs ~ Rs^{-5/2} and Q(r) ~ Sigma_s^{-1/2} Rs^{-5/2} (r/ Rs)^{-beta}. It follows that the phase-space density remains constant, in the sense of Qs=const., in the quiescent phases and it decreases as Rs^{-5/2} in the violent ones. The physical origin of the NFW density profile and the phase-space density power law is still unknown. Yet, the numerical experiments show that halos recover these relations after the violent phases. The major mergers drive Rs to increase and Qs to decrease discontinuously while keeping Qs Rs^{5/2} = const. The virial equilibrium in the quiescent phases implies that a DM halos evolves along a sequence of NFW profiles with constant energy per unit volume (i.e., pressure) within Rs.

astro-ph↗

arXiv2007

Induced Nested Galactic Bars Inside Assembling Dark Matter Halos

We investigate the formation and evolution of nested bar systems in disk galaxies in a cosmological setting by following the development of an isolated dark matter (DM) and baryon density perturbation. The disks form within the assembling triaxial DM halos and the feedback from the stellar evolution is accounted for in terms of supernovae and OB stellar winds. Focusing on a representative model, we show the formation of an oval disk and of a first generation of nested bars with characteristic sub-kpc and a few kpc sizes. The system evolves through successive dynamical couplings and decouplings, forcing the gas inwards and settles in a state of resonant coupling. The inflow rate can support a broad range of activity within the central kpc, from quasar- to Seyfert-types, supplemented by a vigorous star formation as a by-product. The initial bar formation is triggered in response to the tidal torques from the triaxial DM halo, which acts as a finite perturbation. This first generation of bars does not survive for more than 4--5 Gyr: by that time the secondary bar has totally dissolved, while the primary one has very substantially weakened, reduced to a fat oval. This evolution is largely due to chaos introduced by the interaction of the multiple non-axisymmetric components.

astro-ph↗