arXiv subjects

Clinton Enwerem

Publications and source records attributed to Clinton Enwerem.

13 recordsLinked to original sources

arXiv2026

Does Imitation Learning Preserve Temporal Robustness in Dexterous Manipulation? An Expert-Learner Comparison Across Task Execution Speeds

Dexterous manipulation policies learned by imitation are typically evaluated for robustness to variation in scenes, objects, or instructions, but their performance across task execution speeds is less often examined. This leaves open how much temporal robustness a learner retains relative to the expert it imitates. We compare an expert and learner under the same task conditions, initial-condition draws, and speedup factors. We instantiate the evaluation in ParcelStow, a contact-rich task in which the robot acquires, reorients, and inserts a parcel. The demonstrations span the speedup range for the manipulation phases after parcel acquisition. A scripted expert and an Action Chunking with Transformers (ACT) policy trained from the expert's demonstrations both achieve 100 percent task success at nominal speed. Their success rates diverge within the demonstrated range: at its maximum, expert success is 84 percent and ACT success is 53 percent. Two ACT policies with different parameter initializations show similar degradation, decreasing by 34 and 48 percentage points from nominal speed to the maximum demonstrated speed, compared with 16 points for the expert. Stage-level analysis shows that 35 of ACT's 47 failures at the maximum demonstrated speed are insertion misalignments. Under the relative-motion handoff, every ACT acquisition retains the parcel through reorientation and transfer in free space, but only 64 percent complete the overall task, compared with 95 percent after expert acquisition. Across all evaluated policies and speeds, none of the 414 acquisitions without force closure completes the task. Equal nominal task success therefore does not imply preservation of expert performance across execution speeds. Code, data, and evaluation scripts are available at https://github.com/coenwerem/parcelstow.

cs.RO↗

arXiv2026

Grasp Execution Without a Planner: Configuration-Space Grasp Distance Fields with Certified Safety & Guaranteed Quality

Mainstream plan-then-track approaches to multifingered grasp execution entail selecting a grasp, planning a collision-free trajectory, and tracking the resulting trajectory via a feedback controller. Pose-estimation error during execution or scene motion can invalidate this open-loop commitment and trigger replanning. We thus present Grasp Distance Fields (GDFs), smooth softmin distances to finite sets of arm-hand grasp configurations. Using their negative gradients as feedback, we jointly select and execute grasps without planning a trajectory. A CBF-CLF quadratic program (QP) enforces self-collision, workspace, object, and obstacle-clearance constraints, while its CLF slack quantifies obstruction of task progress. We bound the softmin approximation error by $\log N/\rho$ and prove forward invariance of the filtered safe set. To handle changes in contact topology, we combine a hysteretic contact-mode transition with a wrench-quality CBF that limits degradation of the realized force-closure margin relative to hold onset. Using our method, a fixed-base manipulator and a Unitree G1 equipped with the same underactuated hand grasp and lift 46 of 50 test objects amid clutter and moving obstacles. The realized grasps also retain a median 94% of their synthesized quality margin, and each QP solve requires 0.09 ms within a 20 ms control interval. Project page: www.clintonenwerem.com/gdf.

cs.RO↗

arXiv2026

FIRMGrasp: A Friction-Informed Risk Margin for Robust Grasp Synthesis

Classical grasp quality metrics assume one deterministic friction coefficient and therefore cannot assess whether a grasp maintains force closure across plausible friction values. We present FIRMGrasp, a family of grasp quality metrics that incorporates friction uncertainty through Conditional Value-at-Risk (CVaR). At confidence level $\beta$, we evaluate the force-closure margin at the mean of the adverse friction tail. This evaluation defines the risk-adjusted margin $\varepsilon^{(\beta)}$, the inscribed-ball radius of the corresponding grasp wrench space. We prove that $\varepsilon^{(\beta)}$ varies monotonically with $\beta$, remains differentiable in the grasp parameters, and certifies that any grasp with $\varepsilon^{(\beta)} > 0$ achieves force closure with probability at least $\beta$. Across 1,599 LEAP Hand and Allegro Hand grasps, $\varepsilon^{(\beta)}$ identifies friction-sensitive grasps that receive high nominal Ferrari-Canny scores, and 53% of the nominally force-closed grasps lose closure in the adverse friction tail. The nominal margin ranks a successful grasp above a failed grasp with probabilities of only 0.53 in the shake test and 0.67 in the pick test, whereas $\varepsilon^{(\beta)}$ achieves 0.63 and 0.78. At an adverse friction coefficient of 0.2, 70% of grasps with positive $\varepsilon^{(\beta)}$ withstand a simulated lift and lateral pull, compared with 25% of grasps with positive nominal margin and nonpositive $\varepsilon^{(\beta)}$. We also synthesize grasps with positive $\varepsilon^{(\beta)}$ for the RealHand L6 and LEAP Hand, both of which retain the object during adverse-friction lifts. In MuJoCo trials with the RealHand L6, 95% of grasps that establish contact and have positive $\varepsilon^{(\beta)}$ retain the object at the same adverse friction coefficient.

cs.RO↗

arXiv2026

EquiDexFlow: Contact-Grounded SE(3)-Equivariant Dexterous Grasp Generative Flows

Most learned dexterous grasp generators relegate contact forces to a downstream verification step, so a kinematically-plausible pose can still violate the conditions for a stable physical grasp. We address this with EquiDexFlow, an SE(3)-equivariant flow-matching model that jointly predicts wrist pose, joint angles, fingertip contacts, surface normals, and contact forces from an object point cloud. Our architecture projects contacts onto the object surface and forces into the Coulomb friction cone by construction, so placement and friction compliance hold without loss penalties. We prove end-to-end SE(3) equivariance and verify it empirically over 200 rotations, with wrist residuals below $0.04^\circ$ and exactly zero joint deviation. Trained on 8,100 force-closure grasps across 81 objects for the 16-DoF Allegro Hand, our model achieves zero friction violations, the best composite score, and the lowest wrench residual among all ablation variants. We retarget decoded fingertip contacts to a 16-DoF LEAP Hand via per-finger inverse kinematics, and our hardware-feasible refinement places every joint at least 5% inside its actuator envelope while preserving wrench balance. On the physical robot, retargeted EquiDexFlow-decoded grasps complete open-loop pick-and-hold trials on all six test objects, with every asymmetric object succeeding at both the canonical pose and a $120^\circ$ co-rotation. Videos, code, and checkpoints are available at https://equidexflow.github.io.

cs.RO↗

arXiv2026

IDDMBSE: Integrating Data-Driven and Model-Based Systems Engineering for Trusted Autonomous Cyber-Physical Systems

Autonomous cyber-physical systems (CPS) sit at the intersection of Model-Based Systems Engineering (MBSE) and data-driven Machine Learning and Artificial Intelligence (ML/AI), yet no integrated Systems Engineering (SE) methodology natively spans both. We address this gap with IDDMBSE, an Integrated Data-Driven and Model-Based Systems Engineering methodology that extends the rigorous MBSE V-process with a data-driven loop at every step, anchored in SysML, the autonomy stack, and a hybrid model-based plus data-driven trade-off architecture. We instantiate IDDMBSE as an interoperable, open-source tool chain: PERFECT, which maps SysML system architectures to executable ROS autonomy stacks for scalable performance evaluation; TRADES-X, which decomposes design-space exploration into a model-based optimization stage followed by a data-driven evaluation stage; and VERITAS, which combines formal, data-driven, and runtime verification into a single assurance workflow. We demonstrate IDDMBSE on a Trusted Autonomous Ground Robot across its development lifecycle, spanning sensor-suite selection, risk-sensitive path planning, behavior-tree task verification, conformal-prediction-based robust perception, and assured multi-robot coordination, all exercised in a contested-terrain Isaac Sim test range that we release with the tool chain. We close by sketching how IDDMBSE is being re-formulated on SysML v2 / KerML foundations to enable language-native composability and tighter ML/AI integration.

cs.RO↗

arXiv2026

Variational Neural Belief Parameterizations for Robust Dexterous Grasping under Multimodal Uncertainty

Contact variability, sensing uncertainty, and external disturbances make grasp execution stochastic. Expected-quality objectives ignore tail outcomes and often select grasps that fail under adverse contact realizations. Risk-sensitive POMDPs address this failure mode, but many use particle-filter beliefs that scale poorly, obstruct gradient-based optimization, and estimate Conditional Value-at-Risk (CVaR) with high-variance approximations. We instead formulate grasp acquisition as variational inference over latent contact parameters and object pose, representing the belief with a differentiable Gaussian mixture. We use Gumbel-Softmax component selection and location-scale reparameterization to express samples as smooth functions of the belief parameters, enabling pathwise gradients through a differentiable CVaR surrogate for direct optimization of tail robustness. In simulation, our variational neural belief improves robust grasp success under contact-parameter uncertainty and exogenous force perturbations while reducing planning time by roughly an order of magnitude relative to particle-filter model-predictive control. On a serial-chain robot arm with a multifingered hand, we validate grasp-and-lift success under object-pose uncertainty against a Gaussian baseline. Both methods succeed on the tested perturbations, but our controller terminates in fewer steps and less wall-clock time while achieving a higher tactile grasp-quality proxy. Our learned belief also calibrates risk more accurately, keeping mean absolute calibration error below 0.14 across tested simulation regimes, compared with 0.58 for a Cross-Entropy Method planner. We provide code, simulation assets, and a dataset of 243 force-closed grasps at the following link: www.github.com/coenwerem/vnb-grasp.

cs.RO↗

arXiv2026

Risk-Constrained Belief-Space Optimization for Safe Control under Latent Uncertainty

Many safety-critical control systems operate under latent uncertainty that sensors cannot resolve at decision time. Such uncertainty, arising from unknown physical properties, disturbances, or unobserved geometry, affects dynamics, task feasibility, and safety margins. Standard methods optimize expected performance and offer limited protection against rare but severe outcomes, while robust formulations treat uncertainty conservatively without exploiting its probabilistic structure. We consider systems with measured state and an unknown, time-invariant parameter represented by a belief distribution. We propose a risk-sensitive belief-space Model Predictive Path Integral (MPPI) controller that plans under this belief, regularizes performance using Conditional Value-at-Risk (CVaR), and imposes a CVaR constraint on a trajectory safety margin over the horizon. For the exact risk-constrained formulation underlying this controller, we establish three properties: (1) the CVaR constraint implies a probabilistic safety guarantee, (2) the controller recovers the risk-neutral optimum as the objective risk weight tends to zero, and (3) a union-bound argument extends the per-horizon guarantee to cumulative safety over repeated solves. In contact-rich MuJoCo simulations of vision-guided dexterous stowing, where a manipulator inserts a grasped object into an occupied slot with pose uncertainty exceeding prescribed lateral clearance requirements, our method achieves 82% success with zero contact violations at high risk aversion, compared with 55% and 50% for a risk-neutral configuration and a chance-constrained baseline, both of which incur nonzero exterior contact forces. Project page: https://clintonenwerem.com/belief-cvar-mppi/.

eess.SY↗

arXiv2025

Safety-Aware Reinforcement Learning for Control via Risk-Sensitive Action-Value Iteration and Quantile Regression

Mainstream approximate action-value iteration reinforcement learning (RL) algorithms suffer from overestimation bias, leading to suboptimal policies in high-variance stochastic environments. Quantile-based action-value iteration methods reduce this bias by learning a distribution of the expected cost-to-go using quantile regression. However, ensuring that the learned policy satisfies safety constraints remains a challenge when these constraints are not explicitly integrated into the RL framework. Existing methods often require complex neural architectures or manual tradeoffs due to combined cost functions. To address this, we propose a risk-regularized quantile-based algorithm integrating Conditional Value-at-Risk (CVaR) to enforce safety without complex architectures. We also provide theoretical guarantees on the contraction properties of the risk-sensitive distributional Bellman operator in Wasserstein space, ensuring convergence to a unique cost distribution. Simulations of a mobile robot in a dynamic reach-avoid task show that our approach leads to more goal successes, fewer collisions, and better safety-performance trade-offs than risk-neutral methods.

cs.LG↗

arXiv2024

Robust Stochastic Shortest-Path Planning via Risk-Sensitive Incremental Sampling

With the pervasiveness of Stochastic Shortest-Path (SSP) problems in high-risk industries, such as last-mile autonomous delivery and supply chain management, robust planning algorithms are crucial for ensuring successful task completion while mitigating hazardous outcomes. Mainstream chance-constrained incremental sampling techniques for solving SSP problems tend to be overly conservative and typically do not consider the likelihood of undesirable tail events. We propose an alternative risk-aware approach inspired by the asymptotically-optimal Rapidly-Exploring Random Trees (RRT*) planning algorithm, which selects nodes along path segments with minimal Conditional Value-at-Risk (CVaR). Our motivation rests on the step-wise coherence of the CVaR risk measure and the optimal substructure of the SSP problem. Thus, optimizing with respect to the CVaR at each sampling iteration necessarily leads to an optimal path in the limit of the sample size. We validate our approach via numerical path planning experiments in a two-dimensional grid world with obstacles and stochastic path-segment lengths. Our simulation results show that incorporating risk into the tree growth process yields paths with lengths that are significantly less sensitive to variations in the noise parameter, or equivalently, paths that are more robust to environmental uncertainty. Algorithmic analyses reveal similar query time and memory space complexity to the baseline RRT* procedure, with only a marginal increase in processing time. This increase is offset by significantly lower noise sensitivity and reduced planner failure rates.

cs.AI↗

arXiv2023

Safe Collective Control under Noisy Inputs and Competing Constraints via Non-Smooth Barrier Functions

We consider the problem of safely coordinating ensembles of identical autonomous agents to conduct complex missions with conflicting safety requirements and under noisy control inputs. Using non-smooth control barrier functions (CBFs) and stochastic model-predictive control as springboards, and by adopting an extrinsic approach where the ensemble is treated as a unified dynamic entity, we devise a method to synthesize safety-aware control inputs for uncertain collectives. Drawing upon stochastic CBF theory and recent developments in Boolean CBF composition, our method proceeds by smoothing a Boolean-composed CBF and solving a stochastic optimization problem where each agent's forcing term is restricted to the affine subspace of control inputs certified by the combined CBF. For the smoothing step, we employ a polynomial approximation scheme, providing evidence for its advantage in generating more conservative yet sufficiently-filtered control inputs than the smoother but more aggressive equivalents produced from an approximation technique based on the log-sum-exp function. To further demonstrate the utility of the proposed method, we present an upper bound for the expected CBF approximation error, along with results from simulations of a single-integrator collective under velocity perturbations. Lastly, we compare these results with those obtained using a naive state-feedback controller lacking safety filters.

eess.SY↗

arXiv2023

Consensus-Based Leader-Follower Formation Tracking for Control-Affine Nonlinear Multiagent Systems

In the typical multiagent formation tracking problem centered on consensus, the prevailing assumption in the literature is that the agents' nonlinear models can be approximated by integrator systems, by their feedback-linearized equivalents, or by dynamics composed of deterministic linear and nonlinear terms. The resulting approaches associated with such assumptions, however, are hardly applicable to general nonlinear systems. To this end, we present consensus-based control laws for multiagent formation tracking in finite-dimensional state space, with the agents represented by a more general class of dynamics: control-affine nonlinear systems. The agents also exchange information via a leader-follower communication topology modeled as an undirected and connected graph with a single leader node. By leveraging standard tools from algebraic graph theory and Lyapunov analysis, we first derive a locally asymptotically stabilizing formation tracking law. Next, to demonstrate the effectiveness of our approach, we present results from numerical simulations of an example in robotics. These results -- together with a comparison of the formation errors obtained with our approach and those realized via an optimization-based method -- further validate our theoretical propositions.

eess.SY↗

arXiv2023

Optimal Controller Tuning Technique for a First-Order Process with Time Delay

We present a controller tuning strategy for first-order plus time delay (FOPTD) processes, where the time delay in the model is approximated using the Padé function. Using Routh-Hurwitz stability analysis, we derive the gain that gives rise to desirable PID controller settings. The resulting PID controller, now correctly tuned, produces satisfactory closed-loop behavior and stabilizes the first-order plant. Our proposed technique eliminates the dead-time component in the model and results in a minimum-phase system with all of its poles and zeros in the left-half $s$-plane. To demonstrate the effectiveness of our approach, we present control simulation results from an in-depth performance comparison between our technique and other established model-based strategies used for the control of time-delayed systems. These results prove that, for the FOPTD model, Padé approximation eliminates the undesirable effects of the time delay and promises a faster tracking performance superior to conventional model-based controllers.

eess.SY↗

arXiv2023

Distributed Optimal Formation Control for an Uncertain Multiagent System in the Plane

In this paper, we present a distributed optimal multiagent control scheme for quadrotor formation tracking under localization errors. Our control architecture is based on a leader-follower approach, where a single leader quadrotor tracks a desired trajectory while the followers maintain their relative positions in a triangular formation. We begin by modeling the quadrotors as particles in the YZ-plane evolving under dynamics with uncertain state information. Next, by formulating the formation tracking task as an optimization problem -- with a constraint-augmented Lagrangian subject to dynamic constraints -- we solve for the control law that leads to an optimal solution in the control and trajectory error cost-minimizing sense. Results from numerical simulations show that for the planar quadrotor model considered -- with uncertainty in sensor measurements modeled as Gaussian noise -- the resulting optimal control is able to drive each agent to achieve the desired global objective: leader trajectory tracking with formation maintenance. Finally, we evaluate the performance of the control law using the tracking and formation errors of the multiagent system.

eess.SY↗