arXiv subjects

Colin Leclercq

Publications and source records attributed to Colin Leclercq.

7 recordsLinked to original sources

arXiv2025

Projection method for mean resolvent analysis of periodic flows

The mean resolvent operator predicts the mean linear response to forcing in the frequency domain and provides the optimal linear time-invariant approximation of statistically steady, time-varying flows [1]. We first leverage the harmonic resolvent framework [2,3] in order to propose an algorithm for performing mean resolvent analysis of a periodic flow. Next, we propose an alternative approach which does not explicitly rely on the harmonic resolvent framework. The approach leverages the fact that the mean-flow resolvent approximates the mean resolvent operator; therefore, the optimal forcing modes of the latter operator may be sought in a subspace spanned by optimal modes of the former. This projection approach does not require computing the adjoint dynamics about the attractor, which may be convenient for future extensions to more chaotic and turbulent flows. The present paper is, however, focused on periodic flows, where the convergence of the projection approach can be checked in comparison to the `ground truth' provided by the harmonic resolvent framework. This test is performed on a nearly incompressible axisymmetric laminar jet forced harmonically at the inlet. For the weakly unsteady case, the mean-flow resolvent captures the dominant receptivity peak but misses a secondary one present in the mean resolvent gain. For the strongly unsteady case, the mean-flow resolvent fails to predict the frequency of the vortex-pairing, while the mean resolvent correctly locates the corresponding gain peak. The projection method converges with a subspace dimension of 10 in the weakly unsteady case, while about 100 modes are required for accurate predictions in the strongly unsteady regime. Nonetheless, even a one-dimensional subspace correctly identifies the dominant receptivity peak.

physics.flu-dyn↗

arXiv2022

Mean resolvent operator of statistically steady flows

This paper introduces a new operator relevant to input-output analysis of flows in a statistically steady regime far from the steady base flow: the mean resolvent $\mathbf{R}_0$. It is defined as the operator predicting, in the frequency domain, the mean linear response to forcing of the time-varying base flow. As such, it provides the statistically optimal linear time-invariant approximation of the input-output dynamics, which may be useful, for instance, in flow control applications. Theory is developed for the periodic case. The poles of the operator are shown to correspond to the Floquet exponents of the system, including purely imaginary poles at multiples of the fundamental frequency. In general, evaluating mean transfer functions from data requires averaging the response to many realizations of the same input. However, in the specific case of harmonic forcings, we show that the mean transfer functions may be identified without averaging: an observation referred to as `dynamic linearity' in the literature (Dahan et al., 2012). For incompressible flows in the weakly unsteady limit, i.e. when amplification of perturbations by the unsteady part of the periodic Jacobian is small compared to amplification by the mean Jacobian, the mean resolvent $\mathbf{R}_0$ is well-approximated by the well-known resolvent operator about the mean-flow. Although the theory presented in this paper only extends to quasiperiodic flows, the definition of $\mathbf{R}_0$ remains meaningful for flows with continuous or mixed spectra, including turbulent flows. Numerical evidence supports the close connection between the two resolvent operators in quasiperiodic, chaotic and stochastic two-dimensional incompressible flows.

physics.flu-dyn↗

arXiv2022

Reactive control of 2 nd Mack mode in a supersonic boundary layer with freestream velocity/density variations

We consider closed-loop control of a two-dimensional supersonic boundary layer at M = 4.5 that aims at reducing the linear growth of second Mack mode instabilities. These instabilities are first characterized with local spatial and global resolvent analyses, which allow to refine the control strategy and to select appropriate actuators and sensors. After linear input-output reduced order models have been identified, multi-criteria structured mixed $H_{2}/H_{\infty}$ synthesis allows to fix beforehand the controller structure and to minimize appropriate norms of various transfer functions: the $H_{2}$ norm to guarantee performance (reduction of perturbation amplification in nominal condition) and the $H_{\infty}$ norm to maintain performance robustness (with respect to sensor noise) and stability robustness (with respect to uncertain free-stream velocity/density variations). Both feedforward and feedback setups, i.e. with estimation sensor placed respectively upstream/downstream of the actuator, allow to maintain the local perturbation energy below a given threshold over a significant distance downstream of the actuator, even in the case of noisy estimation sensors or free-stream density variations. However, the feedforward setup becomes completely ineffective when convective time-delays are altered by free-stream velocity variations of $\pm 5\%$, which highlights the strong relevance of the feedback setup for performance robustness in convectively unstable flows.

physics.flu-dyn↗

arXiv2020

Transition scenario in hypersonic axisymmetrical compression ramp flow

A high-fidelity simulation of the shock/transitional boundary layer interaction caused by a 15-degrees axisymmetrical compression ramp is performed at a freestream Mach number of 5 and a transitional Reynolds number. The inlet of the computational domain is perturbed with a white noise in order to excite convective instabilities. Coherent structures are extracted using Spectral Proper Orthogonal Decomposition (SPOD), which gives a mathematically optimal decomposition of spatio-temporally correlated structures within the flow. The mean flow is used to perform a resolvent analysis in order to study non-normal linear amplification mechanisms. The comparison between the resolvent analysis and the SPOD results provides insight on both the linear and non-linear mechanisms at play in the flow. To carry out the analysis, the flow is separated into three main regions of interest: the attached boundary layer, the mixing layer and the reattachment region. The observed transition process is dependent on the linear amplification of oblique modes in the boundary layer over a broad range of frequencies. These modes interact nonlinearly to create elongated streamwise structures which are then amplified by a linear mechanism in the rest of the domain until they break down in the reattachment region. The early nonlinear interaction is found to be essential for the transition process.

physics.flu-dyn↗

arXiv2016

Connections between centrifugal, stratorotational and radiative instabilities in viscous Taylor-Couette flow

The `Rayleigh line' $μ=η^2$, where $μ=Ω_o/Ω_i$ and $η=r_i/r_o$ are respectively the rotation and radius ratios between inner (subscript `i') and outer (subscript `o') cylinders, is regarded as marking the limit of centrifugal instability (CI) in unstratified inviscid Taylor-Couette flow, for both axisymmetric and non-axisymmetric modes. Non-axisymmetric stratorotational instability (SRI) is known to set in for anticyclonic rotation ratios beyond that line, i.e. $η^2<μ<1$ for axially stably-stratified Taylor-Couette flow, but the competition between CI and SRI in the range $μ<η^2$ has not yet been addressed. In this paper, we establish continuous connections between the two instabilities at finite Reynolds number Re, as previously suggested by M. Le Bars & P. Le Gal, Phys. Rev. Lett. 99, 064502 (2007), making them indistinguishable at onset. Both instabilities are also continuously connected to the radiative instability at finite Re. These results demonstrate the complex impact viscosity has on the linear stability properties of this flow. Several other qualitative differences with inviscid theory were found, among which the instability of a non-axisymmetric mode localized at the outer cylinder without stratification, and the instability of a mode propagating against the inner cylinder rotation with stratification. The combination of viscosity and stratification can also lead to a `collision' between (axisymmetric) Taylor vortex branches, causing the axisymmetric oscillatory state already observed in past experiments. Perhaps more surprising is the instability of a centrifugal-like helical mode beyond the Rayleigh line, caused by the joint effects of stratification and viscosity. The threshold $μ=η^2$ seems to remain, however, an impassable instability limit for axisymmetric modes, regardless of stratification, viscosity, and even disturbance amplitude.

physics.flu-dyn↗

arXiv2016

Nonlinear waves in stratified Taylor--Couette flow. Part 1. Layer formation

This paper is the first part of a two-fold study of mixing, i.e. the formation of layers and upwelling of buoyancy, in axially stratified Taylor--Couette flow, with fixed outer cylinder. Using linear analysis and direct numerical simulation, we show the critical role played by non-axisymmetric instability modes, despite the fact that the flow is centrifugally unstable in the sense of Rayleigh's criterion. Interactions between helical modes of opposite handedness leads to the formation of nonlinear coherent structures: (mixed)-ribbons and (mixed)-cross-spirals. These give birth to complex density interface patterns, seemingly appearing and disappearing periodically as the coherent structure slowly rotates around the annulus. These coherent structures seem to be responsible for the formation of layers reported in a recent experiment by Oglethorpe et al. (2013). We distinguish `dynamic layering', instantaneous, localized and caused by the vortical motions, from `static layering' corresponding to the formation of a `staircase profile' in the adiabatically sorted background density. The latter only occurs at large enough Schmidt number, revealing the significant impact of the Schmidt number in the layering process.

physics.flu-dyn↗

arXiv2016

Nonlinear waves in stratified Taylor--Couette flow. Part 2. Buoyancy flux

This paper is the second part of a two-fold study of mixing, i.e. the formation of layers and upwelling of buoyancy, in axially stratified Taylor--Couette flow, with fixed outer cylinder. In a first paper, we showed that the dynamics of the flow was dominated by coherent structures made of a superposition of nonlinear waves. (Mixed)-ribbons and (mixed)-cross-spirals are generated by interactions between a pair of linearly unstable helical modes of opposite `handedness', and appear to be responsible for the formation of well-mixed layers and sharp density interfaces. In this paper, we show that these structures are also fully accountable for the upwards buoyancy flux in the simulations. The mechanism by which this occurs is a positive coupling between the density and vertical velocity components of the most energetic waves. This coupling is primarily caused by diffusion of density at low Schmidt number Sc, but can also be a nonlinear effect at larger Sc. Turbulence was found to contribute negatively to the buoyancy flux at Sc=1,10,16, which lead to the conclusion that mass upwelling is a consequence of chaotic advection, even at large Reynolds number. Artificially isolating the coherent structure therefore leads to excellent estimates of the flux Richardson numbers Ri_f from the DNS. We also used the theoretical framework of Winters et al. (1995) to analyse the energetics of mixing in an open control volume, shedding light on the influence of end effects in the potential energy budget. The potential connection with the buoyancy flux measurements made in the recent experiment of Oglethorpe et al. (2013) is also discussed.

physics.flu-dyn↗