arXiv subjects

Colton Fruhling

Publications and source records attributed to Colton Fruhling.

7 recordsLinked to original sources

arXiv2026

Nonlinearity Reversal in Epsilon-Near-Zero Indium Tin Oxide Driven by Few-Cycle Light Pulse

Recent breakthrough studies of nonlinearities at extreme pump intensities ($\sim$1 $\text{TW/cm}^2$) in transparent conducting oxides (TCOs) have rewritten our understanding of the dynamics in these materials. However, exploring TCO dynamics beyond these intensities is prohibited by the damage threshold of the material. In this work, we overcome this problem by using a few-cycle pump laser pulse (sub-8\,fs) to maximize the intensity while keeping the optical fluence below the damage threshold. We observe a reversal in the optical response trend starting at optical pump laser intensities of $\sim$5 $\text{TW/cm}^2$ similar to Segal et al. At the highest pump pulse intensities, we obtain a complete change in the sign of the modulation for both transmission and reflection, producing a full-cycle oscillation of the refractive index modulation within 300\,fs. The amplitude of the sign reversal scales quadratically with the intensity. We therefore propose a simple two-photon absorption (TPA) model to explain the observed behaviour. The TPA, which is normally forbidden by the Pauli blocking, is enabled here by intraband excitations from the lower to the upper non-equilibrium states of the conduction band (CB). Such excitations vacate the states at the bottom of the CB, lifting up the blocking and thus making interband TPA possible. The model is in good agreement with experimental results, capturing the essential trends in the observed data and revealing the dynamics of competing channels caused by the interplay between interband and intraband transitions. This intensity-controlled mechanism could be the key to unlocking new applications of TCOs for time-varying photonics such as photonic time crystals.

physics.optics↗

arXiv2025

Pathway to Optical-Cycle Dynamic Photonics: Extreme Electron Temperatures in Transparent Conducting Oxides

We theoretically demonstrate that transparent conducting oxides (TCOs) exhibit oscillatory and sign-reversing dynamic modulation in transmittance on the order of a few optical cycles under extreme electron temperatures, providing a possible explanation for TCO dynamics observed in earlier experiments. We present an inverse-designed multilayer cavity incorporating an ultrathin TCO layer, which supports an oscillatory optical response more pronounced than those previously observed experimentally in TCOs. This approach yields transmittance oscillations with a characteristic period of ~20fs, which corresponds to approximately four optical cycles of the 1.431{\mu}m probe beam. To achieve a similar oscillatory modulation in {\Delta}n, we incorporate a TCO electron-acceptor layer on top of the inverse-designed cavity, enabling thermionic carrier injection at the TCO junction. The resulting acceptor layer exhibits a striking {\Delta}n response as fast as 20fs, corresponding to only three optical cycles of the 1.8-2.0{\mu}m probe, and can be further tailored into the sub-optical-cycle regime. The findings could both clarify the previously unexplained transient dynamics in TCOs and, for the first time, demonstrate the critical role of electron temperatures in driving oscillatory dynamic responses.

physics.optics↗

arXiv2025

Topology-Optimized Dielectric Cavities for Enhanced Excitonic Light Emission from $\rm WSe_{2}$

Photonic inverse design and, especially, topology optimization, enable dielectric cavities with deeply sub-diffraction mode volumes and high quality factors, thus offering a powerful platform for enhanced light-matter coupling. Here, we design and fabricate arrays of CMOS-compatible silicon cavities on sapphire with extreme subwavelength transverse mode sizes of only 30-40 nm ($\rm V\sim\lambda^3/2500$). These cavities are engineered for deterministic coupling to a monolayer (or few-layer) excitonic material, producing strong near-field localization directly beneath the 2D material. Photoluminescence (PL) measurements show reproducible tenfold enhancements relative to bare silicon, consistent with numerical simulations that account for material absorption and fabrication tolerances. Furthermore, time-resolved PL measurements reveal pronounced lifetime shortening and non-exponential dynamics, indicating cavity-mediated exciton-exciton interactions. The optimized cavity geometry enhances the far-field collection efficiency and supports scalable integration with van der Waals semiconductors. Our results show that the arrays of topology-optimized dielectric cavities are a versatile, scalable platform for controlling excitonic emission and interactions, which creates new opportunities in nonlinear optics, optoelectronics, and quantum photonics.

physics.optics↗

arXiv2023

All-optical modulation with single-photons using electron avalanche

The distinctive characteristics of light, such as high-speed and low-loss propagation, low cross-talk and low power consumption, along with photons unique quantum properties, make it most suitable for various applications in communication, high-resolution imaging, optical computing, and emerging quantum information technologies. One limiting factor, though, is the weak optical nonlinearity of conventional media that poses challenges for the control of light with ultra-low intensities. In this work, we demonstrate all-optical modulation enabled by electron avalanche process in silicon, using a control beam with single-photon light intensities. The observed process corresponds to a record-high nonlinear refractive index of $n_{2}$~$1.3*10^{-2} m^2/W$, which is several orders of magnitude higher than the best known nonlinear optical materials. Our approach opens the possibility of gigahertz-speed, and potentially even faster, optical switching at the single-photon level, which could enable a family of novel on-chip photonic and quantum devices operating at room temperature.

physics.optics↗

arXiv2023

Wide-range Angle-sensitive Plasmonic Color Printing on Lossy-Resonator Substrates

We demonstrate a sustainable, lithography-free process for generating non fading plasmonic colors with a prototype device that produces a wide range of vivid colors in red, green, and blue (RGB) ([0-1], [0-1], [0-1]) color space from violet (0.7, 0.72, 1) to blue (0.31, 0.80, 1) and from green (0.84, 1, 0.58) to orange (1, 0.58, 0.46). The proposed color-printing device architecture integrates a semi-transparent random metal film (RMF) with a metal back mirror to create a lossy asymmetric Fabry-P\'erot resonator. This device geometry allows for advanced control of the observed color through the five-degree multiplexing (RGB color space, angle, and polarization sensitivity). An extended color palette is then obtained through photomodification process and localized heating of the RMF layer under various femtosecond laser illumination conditions at the wavelengths of 400 nm and 800 nm. Colorful design samples with total areas up to 10 mm2 and 100 {\mu}m resolution are printed on 300-nm-thick films to demonstrate macroscopic high-resolution color generation. The proposed printing approach can be extended to other applications including laser marking, anti-counterfeiting and chromo-encryption.

physics.optics↗

arXiv2022

Transverse Oscillating Bubble Enhanced Laser-driven Betatron X-ray Radiation Generation

Ultrafast high-brightness X-ray pulses have proven invaluable for a broad range of research. Such pulses are typically generated via synchrotron emission from relativistic electron bunches using large-scale facilities. Recently, significantly more compact X-ray sources based on laser-wakefield accelerated (LWFA) electron beams have been demonstrated. In particular, laser-driven sources, where the radiation is generated by transverse oscillations of electrons within the plasma accelerator structure (so-called betatron oscillations) can generate highly-brilliant ultrashort X-ray pulses using a comparably simple setup. Here, we experimentally demonstrate a method to markedly enhance and control the parameters of LWFA-driven betatron X-ray emission. With our novel Transverse Oscillating Bubble Enhanced Betatron Radiation (TOBER) scheme, we show a significant increase in the number of generated photons by specifically manipulating the amplitude of the betatron oscillations. We realize this through an orchestrated evolution of the temporal laser pulse shape and the accelerating plasma structure. This leads to controlled off-axis injection of electrons that perform large-amplitude collective transverse betatron oscillations, resulting in increased radiation emission. Our concept holds the promise for a method to optimize the X-ray parameters for specific applications, such as time-resolved investigations with spatial and temporal atomic resolution or advanced high-resolution imaging modalities, and the generation of X-ray beams with even higher peak and average brightness.

physics.acc-ph↗

arXiv2020

Generation of ultrafast electron bunch trains via trapping into multiple periods of plasma wakefields

We demonstrate a novel approach to the generation of femtosecond electron bunch trains via laser-driven wakefield acceleration. We use two independent high-intensity laser pulses, a drive, and injector, each creating their own plasma wakes. The interaction of the laser pulses and their wakes results in a periodic injection of free electrons in the drive plasma wake via several mechanisms, including ponderomotive drift, wake-wake interference, and pre-acceleration of electrons directly by strong laser fields. Electron trains were generated with up to 4 quasi-monoenergetic bunches, each separated in time by a plasma period. The time profile of the generated trains is deduced from an analysis of beam loading and confirmed using 2D Particle-in-Cell simulations.

physics.plasm-ph↗