arXiv subjects

Cong Li

Publications and source records attributed to Cong Li.

At least 181 records · Page 10Linked to original sources

arXiv2019

Joule-Thomson expansion of the Bardeen-AdS black holes

The Joule-Thomson expansion process is studied for Bardeen-AdS black holes in the extended phase space. Firstly, we get Joule-Thomson coefficient and find that the divergent point of Joule-Thomson coefficient coincides with the zero point of temperature. The inversion curves are also obtained from the zero point of Joule-Thomson coefficient. Then the minimum inversion temperature and the corresponding mass are obtained. In addition, the ratio between minimum inversion and critical temperature for Bardeen-AdS black holes is also calculated. We obtain the isenthalpic curve in $T$-$P$ graph and demonstrate the cooling-heating region by the inversion curve. An interesting phenomenon we get is that black hole is always in heating process. The same phenomenon can be also obtained from the charged AdS black holes.

gr-qc↗

arXiv2019

Evolving nature of human contact networks with its impact on epidemic processes

Human contact networks are constituted by a multitude of individuals and pairwise contacts among them. However, the dynamic nature, which generates the evolution of human contact networks, of contact patterns is not known yet. Here, we analyse three empirical datasets and identify two crucial mechanisms of the evolution of temporal human contact networks, i.e. the activity state transition laws for an individual to be socially active, and the contact establishment mechanism that active individuals adopt. We consider both of the two mechanisms to propose a temporal network model, named the memory driven (MD) model, of human contact networks. Then we study the susceptible-infected (SI) spreading processes on empirical human contact networks and four corresponding temporal network models, and compare the full prevalence time of SI processes with various infection rates on the networks. The full prevalence time of SI processes in the MD model is the same as that in real-world human contact networks. Moreover, we find that the individual activity state transition promotes the spreading process, while, the contact establishment of active individuals suppress the prevalence. Apart from this, we observe that even a small percentage of individuals to explore new social ties is able to induce an explosive spreading on networks. The proposed temporal network framework could help the further study of dynamic processes in temporal human contact networks, and offer new insights to predict and control the diffusion processes on networks.

physics.soc-ph↗

arXiv2019

Distinct Superconducting Gap on Two Bilayer-Split Fermi Surface Sheets in $Bi_2Sr_2CaCu_2O_{8+δ}$ Superconductor

High resolution laser-based angle-resolved photoemission measurements were carried out on an overdoped $Bi_2Sr_2CaCu_2O_{8+δ}$ superconductor with a Tc of 75 K. Two Fermi surface sheets caused by bilayer splitting are clearly identified with rather different doping levels: the bonding sheet corresponds to a doping level of 0.14 which is slightly underdoped while the antibonding sheet has a doping of 0.27 that is heavily overdoped, giving an overall doping level of 0.20 for the sample. Different superconducting gap sizes on the two Fermi surface sheets are revealed for the first time. The superconducting gap on the antibonding Fermi surface sheet follows a standard d-wave form while it deviates from the standard d-wave form for the bonding Fermi surface sheet. The maximum gap difference between the two Fermi surface sheets near the antinodal region is $\sim$2 meV. These observations provide important information for studying the relationship between the Fermi surface topology and superconductivity, and the layer-dependent superconductivity in high temperature cuprate superconductors.

cond-mat.supr-con↗

arXiv2019

Insulating Parent Phase and Distinct Doping Evolution to Superconductivity in Single-Layer FeSe/SrTiO3 Films

The single-layer FeSe/SrTiO3 (FeSe/STO) films have attracted much attention because of their simple crystal structure, distinct electronic structure and record high superconducting transition temperature (Tc). The origin of the dramatic Tc enhancement in single-layer FeSe/STO films and the dichotomy of superconductivity between single-layer and multiple-layer FeSe/STO films are still under debate. Here we report a comprehensive high resolution angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy measurements on the electronic structure evolution with doping in single-layer and multiple-layer FeSe/STO films. We find that the single-layer FeSe/STO films have a distinct parent phase and a route of doping evolution to superconductivity that are fundamentally different from multiple-layer FeSe/STO films. The parent phase of the single-layer FeSe/STO films is insulating, and its doping evolution is very similar to that of doping a Mott insulator in cuprate superconductors. In multiple-layer FeSe/STO films, high-Tc superconductivity occurs by suppressing the nematic order in the parent compound with electron doping. The single-layer FeSe/STO films represent the first clear case in the iron-based superconductors that the parent compound is an insulator. Our observations of the unique parent state and doping evolution in the single-layer FeSe/STO films provide key insight in understanding its record high-Tc superconductivity. They also provide a new route of realizing superconductivity in iron-based superconductors that is common in high temperature cuprate superconductors.

cond-mat.supr-con↗

arXiv2019

Identification of a Large Amount of Excess Fe in Superconducting Single-Layer FeSe/SrTiO3 Films

The single-layer FeSe films grown on SrTiO3 (STO) substrates have attracted much attention because of its record high superconducting critical temperature (Tc). It is usually believed that the composition of the epitaxially grown single-layer FeSe/STO films is stoichiometric, i.e., the ratio of Fe and Se is 1:1. Here we report the identification of a large amount of excess Fe in the superconducting single-layer FeSe/STO films. By depositing Se onto the superconducting single-layer FeSe/STO films, we find by in situ scanning tunneling microscopy (STM) the formation of the second-layer FeSe islands on the top of the first layer during the annealing process at a surprisingly low temperature ($\sim$150°C) which is much lower than the usual growth temperature ($\sim$490°C). This observation is used to detect excess Fe and estimate its quantity in the single-layer FeSe/STO films. The amount of excess Fe detected is at least 20% that is surprisingly high for the superconducting single-layer FeSe/STO films. The discovery of such a large amount of excess Fe should be taken into account in understanding the high-Tc superconductivity and points to a likely route to further enhance Tc in the superconducting single-layer FeSe/STO films.

cond-mat.supr-con↗

arXiv2019

The Impact of Information Dissemination on Vaccination in Multiplex Networks

The impact of information dissemination on epidemic control is essentially subject to individual behaviors. Unlike information-driven behaviors, vaccination is determined by many cost-related factors, whose correlation with the information dissemination should be better understood. To this end, we propose an evolutionary vaccination game model in multiplex networks by integrating an information-epidemic spreading process into the vaccination dynamics, and explore how information dissemination influences vaccination. The spreading process is described by a two-layer coupled susceptible-alert-infected-susceptible (SAIS) model, where the strength coefficient between two layers is defined to characterize the tendency and intensity of information dissemination. We find that information dissemination can increase the epidemic threshold, however, more information transmission cannot promote vaccination. Specifically, increasing information dissemination even leads to a decline of the vaccination equilibrium and raises the final infection density. Moreover, we study the impact of strength coefficient and individual sensitivity on social cost, and unveil the role of information dissemination in controlling the epidemic with numerical simulations.

physics.soc-ph↗

arXiv2019

R$^2$-CNN: Fast Tiny Object Detection in Large-Scale Remote Sensing Images

Recently, the convolutional neural network has brought impressive improvements for object detection. However, detecting tiny objects in large-scale remote sensing images still remains challenging. First, the extreme large input size makes the existing object detection solutions too slow for practical use. Second, the massive and complex backgrounds cause serious false alarms. Moreover, the ultratiny objects increase the difficulty of accurate detection. To tackle these problems, we propose a unified and self-reinforced network called remote sensing region-based convolutional neural network ($\mathcal{R}^2$-CNN), composing of backbone Tiny-Net, intermediate global attention block, and final classifier and detector. Tiny-Net is a lightweight residual structure, which enables fast and powerful features extraction from inputs. Global attention block is built upon Tiny-Net to inhibit false positives. Classifier is then used to predict the existence of targets in each patch, and detector is followed to locate them accurately if available. The classifier and detector are mutually reinforced with end-to-end training, which further speed up the process and avoid false alarms. Effectiveness of $\mathcal{R}^2$-CNN is validated on hundreds of GF-1 images and GF-2 images that are 18 000 $\times$ 18 192 pixels, 2.0-m resolution, and 27 620 $\times$ 29 200 pixels, 0.8-m resolution, respectively. Specifically, we can process a GF-1 image in 29.4 s on Titian X just with single thread. According to our knowledge, no previous solution can detect the tiny object on such huge remote sensing images gracefully. We believe that it is a significant step toward practical real-time remote sensing systems.

cs.CV↗

arXiv2019

Stereo Visual Inertial LiDAR Simultaneous Localization and Mapping

Simultaneous Localization and Mapping (SLAM) is a fundamental task to mobile and aerial robotics. LiDAR based systems have proven to be superior compared to vision based systems due to its accuracy and robustness. In spite of its superiority, pure LiDAR based systems fail in certain degenerate cases like traveling through a tunnel. We propose Stereo Visual Inertial LiDAR (VIL) SLAM that performs better on these degenerate cases and has comparable performance on all other cases. VIL-SLAM accomplishes this by incorporating tightly-coupled stereo visual inertial odometry (VIO) with LiDAR mapping and LiDAR enhanced visual loop closure. The system generates loop-closure corrected 6-DOF LiDAR poses in real-time and 1cm voxel dense maps near real-time. VIL-SLAM demonstrates improved accuracy and robustness compared to state-of-the-art LiDAR methods.

cs.RO↗

arXiv2019

Reduced-Rank Local Distance Metric Learning for k-NN Classification

We propose a new method for local distance metric learning based on sample similarity as side information. These local metrics, which utilize conical combinations of metric weight matrices, are learned from the pooled spatial characteristics of the data, as well as the similarity profiles between the pairs of samples, whose distances are measured. The main objective of our framework is to yield metrics, such that the resulting distances between similar samples are small and distances between dissimilar samples are above a certain threshold. For learning and inference purposes, we describe a transductive, as well as an inductive algorithm; the former approach naturally befits our framework, while the latter one is provided in the interest of faster learning. Experimental results on a collection of classification problems imply that the new methods may exhibit notable performance advantages over alternative metric learning approaches that have recently appeared in the literature.

cs.LG↗

arXiv2019

Emergence of Superconductivity from Fully Incoherent Normal State in an Iron-Based Superconductor (Ba$_{0.6}$K$_{0.4}$)Fe$_2$As$_2$

In unconventional superconductors, it is generally believed that understanding the physical properties of the normal state is a pre-requisite for understanding the superconductivity mechanism. In conventional superconductors like niobium or lead, the normal state is a Fermi liquid with a well-defined Fermi surface and well-defined quasipartcles along the Fermi surface. Superconductivity is realized in this case by the Fermi surface instability in the superconducting state and the formation and condensation of the electron pairs (Cooper pairing). The high temperature cuprate superconductors, on the other hand, represent another extreme case that superconductivity can be realized in the underdoped region where there is neither well-defined Fermi surface due to the pseudogap formation nor quasiparticles near the antinodal regions in the normal state. Here we report a novel scenario that superconductivity is realized in a system with well-defined Fermi surface but without quasiparticles along the Fermi surface in the normal state. High resolution laser-based angle-resolved photoemission measurements have been performed on an optimally-doped iron-based superconductor (Ba$_{0.6}$K$_{0.4}$)Fe$_2$As$_2$. We find that, while sharp superconducting coherence peaks emerge in the superconducting state on the hole-like Fermi surface sheets, no quasiparticle peak is present in the normal state. Its electronic behaviours deviate strongly from a Fermi liquid system. The superconducting gap of such a system exhibits an unusual temperature dependence that it is nearly a constant in the superconducting state and abruptly closes at T$_c$. These observations have provided a new platform to study unconventional superconductivity in a non-Fermi liquid system.

cond-mat.supr-con↗

arXiv2019

Disappearance of Superconductivity and a Concomitant Lifshitz Transition in Heavily-Overdoped Bi2Sr2CuO6 Superconductor Revealed by Angle-Resolved Photoemission Spectroscopy

By partially doping Pb to effectively suppress the superstructure in single-layered cuprate Bi2Sr2CuO6+δ(Pb-Bi2201) and annealing them in vacuum or in high pressure oxygen atmosphere, a series of high quality Pb-Bi2201 single crystals are obtained with Tc covering from 17 K to non-supercondcuting in the overdoped region. High resolution angle resolved photoemission spectroscopy (ARPES) measurements are carried out on these samples to investigate the evolution of the Fermi surface topology with doping in the normal state. Clear and complete Fermi surface are observed and quantitatively analyzed in all these overdoped Pb-Bi2201 samples. A Lifshitz transition from hole-like Fermi surface to electron like Fermi surface with increasing doping is observed at a doping level of ~0.35. This transition coincides with the change that the sample undergoes from superconducting to non-superconducting states. Our results reveal the emergence of an electron-like Fermi surface and the existence of a Lifshitz transition in heavily overdoped Bi2201 samples. They provide important information in understanding the connection between the disappearance of superconductivity and the Lifshitz transition in the overdoped region.

cond-mat.supr-con↗

arXiv2019

Apparent horizon and gravitational thermodynamics of Universe in the Eddington-Born-Infeld theory

The thermodynamics of Universe in the Eddington-Born-Infeld (EBI) theory was restudied by utilizing the holographic-style gravitational equations that dominate the dynamics of the cosmical apparent horizon $Υ_{A}$ and the evolution of Universe. We started in rewriting the EBI action of the Palatini approach into the Bigravity-type action with an extra metric $q_{μν}$. With the help of the holographic-style dynamical equations, we discussed the property of the cosmical apparent horizon $Υ_{A}$ including timelike, spacelike and null characters, which depends on the value of the parameter of state $w_{m}$ in EBI Universe. The unified first law for the gravitational thermodynamics and the total energy differential for the open system enveloped by $Υ_{A}$ in EBI Universe were obtained. Finally, applying the positive-heat-out sign convention, we derived the generalized second law of gravitational thermodynamics in EBI universe.

gr-qc↗

arXiv2018

The evolution of universe in the two-scalar theory

We generalize f(R,T) gravity into the two-scalar theory that includes two independent scalar fields by the variational method, and we derive its field equations in Einstein frame using conformal transformation. Based on Friedmann equations and Raychaudhuri equation, with a consideration of the cosmic content as its perfect-fluid form, a further discussion leads us to an accelerated expanding condition of universe. In the two-scalar theory, universe has two states which are the accelerated expansion and decelerated contraction, and it has three stages during its evolution. The first and third stages are in the accelerated expanding state, and the second stage is in the decelerated contracting state. The third stage represents the present universe and it tends to become a dust universe.

gr-qc↗

arXiv2018

Orbital Origin of Extremely Anisotropic Superconducting Gap in Nematic Phase of FeSe Superconductor

The iron-based superconductors are characterized by multiple-orbital physics where all the five Fe 3$d$ orbitals get involved. The multiple-orbital nature gives rise to various novel phenomena like orbital-selective Mott transition, nematicity and orbital fluctuation that provide a new route for realizing superconductivity. The complexity of multiple-orbital also asks to disentangle the relationship between orbital, spin and nematicity, and to identify dominant orbital ingredients that dictate superconductivity. The bulk FeSe superconductor provides an ideal platform to address these issues because of its simple crystal structure and unique coexistence of superconductivity and nematicity. However, the orbital nature of the low energy electronic excitations and its relation to the superconducting gap remain controversial. Here we report direct observation of highly anisotropic Fermi surface and extremely anisotropic superconducting gap in the nematic state of FeSe superconductor by high resolution laser-based angle-resolved photoemission measurements. We find that the low energy excitations of the entire hole pocket at the Brillouin zone center are dominated by the single $d_{xz}$ orbital. The superconducting gap exhibits an anti-correlation relation with the $d_{xz}$ spectral weight near the Fermi level, i.e., the gap size minimum (maximum) corresponds to the maximum (minimum) of the $d_{xz}$ spectral weight along the Fermi surface. These observations provide new insights in understanding the orbital origin of the extremely anisotropic superconducting gap in FeSe superconductor and the relation between nematicity and superconductivity in the iron-based superconductors.

cond-mat.supr-con↗

arXiv2018

Novel methods for measuring the optical parameters of the water Cherenkov detector

In this paper, novel methods are presented to measure the optical properties of muon detectors (MDs) in the Large High-Altitude Air Shower Observatory (LHAASO), which can also be used by other experiments. Each MD consists of a cylindrical water Cherenkov detector, with a Tyvek liner containing pure water, and a photomultiplier tube (PMT) mounted on the top. The time distribution of the photons collected by the PMT in the water Cherenkov detector have an approximately exponential distribution, and their decay factor is determined by the photon absorption length in the water, the reflectivity of the inner Tyvek surface, the mean reflecting step length of photons reflected by the inner surface, and the ratio of reflectional Tyvek area to the total inner surface area. By considering the principles of photon propagation in the water Cherenkov detector, we have developed novel methods to measure the water absorption length, the Tyvek reflectivity, and the mean step length of photons. The step length of photons can be determined by measuring the time distribution of the reflected photons hitting the PMT after multiple photons with single wavelength are generated in the tank, with slightly different ratios of the inner Tyvek to the total inner area. The water absorption length and Tyvek reflectivity can be measured simultaneously by the PMT by changing the height of the water, while the step length and Tyvek reflectivity in air can also be measured simultaneously. The proposed novel methods are supported by deduction of formulae and verified by GEANT4 simulations and the prototype experiment.

physics.ins-det↗

arXiv2017

Multi-Task Learning Using Neighborhood Kernels

This paper introduces a new and effective algorithm for learning kernels in a Multi-Task Learning (MTL) setting. Although, we consider a MTL scenario here, our approach can be easily applied to standard single task learning, as well. As shown by our empirical results, our algorithm consistently outperforms the traditional kernel learning algorithms such as uniform combination solution, convex combinations of base kernels as well as some kernel alignment-based models, which have been proven to give promising results in the past. We present a Rademacher complexity bound based on which a new Multi-Task Multiple Kernel Learning (MT-MKL) model is derived. In particular, we propose a Support Vector Machine-regularized model in which, for each task, an optimal kernel is learned based on a neighborhood-defining kernel that is not restricted to be positive semi-definite. Comparative experimental results are showcased that underline the merits of our neighborhood-defining framework in both classification and regression problems.

cs.LG↗

arXiv2017

Electronic structure and nematic phase transition in superconducting multi-layer FeSe films grown by pulsed laser deposition method

We report comprehensive angle-resolved photoemission investigations on the electronic structure of single crystal multiple-layer FeSe films grown on CaF2 substrate by pulsed laser deposition (PLD) method. Measurements on FeSe/CaF2 samples with different superconducting transition temperatures Tc of 4 K, 9 K and 14 K reveal electronic difference in their Fermi surface and band structure. Indication of the nematic phase transition is observed from temperature-dependent measurements of these samples; the nematic transition temperature is 140-160 K, much higher than 90 K for the bulk FeSe. Potassium deposition is applied onto the surface of these samples; the nematic phase is suppressed by potassium deposition which introduces electrons to these FeSe films and causes a pronounced electronic structure change. We compared and discussed the electronic structure and superconductivity of the FeSe/CaF2 films by PLD method with the FeSe/SrTiO3 films by molecular beam epitaxy (MBE) method and bulk FeSe. The PLD-grown multilayer FeSe/CaF2 is more hole-doped than that in MBE-grown multiple-layer FeSe films. Our results on FeSe/CaF2 films by PLD method establish a link between bulk FeSe single crystal and FeSe/SrTiO3 films by MBE method, and provide important information to understand superconductivity in FeSe-related systems.

cond-mat.supr-con↗

arXiv2017

Metallic vanadium disulfide nanosheets as a platform material for multifunctional electrode applications

Nano-thick metallic transition metal dichalcogenides such as VS$_{2}$ are essential building blocks for constructing next-generation electronic and energy-storage applications, as well as for exploring unique physical issues associated with the dimensionality effect. However, such 2D layered materials have yet to be achieved through either mechanical exfoliation or bottom-up synthesis. Herein, we report a facile chemical vapor deposition route for direct production of crystalline VS$_{2}$ nanosheets with sub-10 nm thicknesses and domain sizes of tens of micrometers. The obtained nanosheets feature spontaneous superlattice periodicities and excellent electrical conductivities (~3$\times$10$^{3}$ S cm$^{-1}$), which has enabled a variety of applications such as contact electrodes for monolayer MoS$_{2}$ with contact resistances of ~1/4 to that of Ni/Au metals, and as supercapacitor electrodes in aqueous electrolytes showing specific capacitances as high as 8.6$\times$10$^{2}$ F g$^{-1}$. This work provides fresh insights into the delicate structure-property relationship and the broad application prospects of such metallic 2D materials.

cond-mat.mtrl-sci↗