SearcharxivSearch

arXiv subjects

Congrui Jin

Publications and source records attributed to Congrui Jin.

9 recordsLinked to original sources

Modeling conflicting incentives in engineering senior capstone projects: A multi-player game theory approach

University engineering capstone projects involve sustained interaction among students, faculty, and industry sponsors whose objectives are only partially aligned. While capstones are widely used in engineering education, existing analyses typically treat stakeholder behavior informally or descriptively, leaving incentive conflicts, information asymmetries, and strategic dependencies underexplored. This paper develops a formal game-theoretic framework that models capstone projects as a sequential Bayesian game involving three players: the university, the industry sponsor, and the student team. The framework is intended as an analytical and explanatory tool for understanding how institutional policy choices, such as grading structures, intellectual property rules, and sponsor engagement expectations, shape stakeholder behavior and project outcomes, rather than as a calibrated or predictive model. The university acts as a constrained Stackelberg leader by committing to course policies and assessment structures while anticipating strategic responses by sponsors and students under incomplete information. Reduced-form outcome functions capture technical quality, documentation quality, timeliness, alignment with sponsor needs, and publishability, while payoff functions reflect stakeholder-specific objectives and costs. Under standard assumptions, the model admits stable equilibrium regimes that correspond to empirically recognizable capstone dynamics observed in practice, including cooperative engagement, sponsor-dominated exploitation, and student grade gaming. Rather than claiming precise prediction, the framework provides a structured basis for reasoning about incentive design, policy tradeoffs, and structural failure modes in project-based learning environments, as well as for future extensions incorporating richer dynamics, repeated interaction, and empirical calibration.

cs.CY

Design of Engineered Living Materials for Martian Construction

As the next step in extraterrestrial exploration, many engineers and scientists around the country revealed their intense interest to enable multiplanetary human life, including colonizing Mars. This study proposes that architecture on Mars can be realized by a synthetic lichen system, composed of diazotrophic cyanobacteria and filamentous fungi, which produce abundant biominerals and biopolymers to bond Martian regolith into consolidated building blocks. These self-growing building blocks can be assembled into a wide range of structures. Diazotrophic cyanobacteria will 1) fix carbon dioxide and dinitrogen from the atmosphere and convert them into oxygen and organic carbon and nitrogen sources to support filamentous fungi; and 2) give rise to high concentrations of carbonate ions because of photosynthetic activities. Filamentous fungi will 1) bind metal ions onto fungal cell walls and serve as nucleation sites to promote biomineral precipitates; and 2) assist the survival and growth of cyanobacteria by providing them water, minerals, additional carbon dioxide, and protection. This report presents the major progress of the project. It has been tested and confirmed that such co-culture systems can be created, and they grow very well solely on Martian regolith simulants, air, light, and an inorganic liquid medium without any additional carbon or nitrogen sources. The cyanobacterial and fungal growth in such co-culture systems is significantly better than their axenic growth due to mutual interactions. The amounts and morphologies of the precipitated crystals vary remarkably depending on the cultivation condition.

q-bio.OT

Weaving Life into Regolith: Engineered Autotrophic-Heterotrophic Consortia for Autonomous Biofabrication from Granular Feedstocks

Long-duration human missions to Mars will require autonomous systems capable of converting in situ resources into structural materials, tools, and functional components. More broadly, such systems represent a class of resource-limited bioprocesses relevant to extreme-environment manufacturing. Here, we investigate engineered autotrophic-heterotrophic consortia, inspired by lichen biology, as a platform for autonomous biofabrication from granular feedstocks. We experimentally screened filamentous fungi and paired them with diazotrophic cyanobacteria to identify mutually supportive consortia capable of sustained growth and biomineral production in the presence of Martian regolith simulant as the primary inorganic substrate, without external organic carbon or nitrogen inputs. Selected co-cultures exhibited evidence of metabolic coupling, and untargeted metabolomic analysis revealed coordinated reprogramming consistent with integrated carbon and nitrogen metabolism within the consortia. These systems facilitated mineral consolidation of regolith particles, demonstrating the feasibility of near-closed-loop biomineral production under resource-limited conditions. While integration with additive manufacturing remains conceptual, this study establishes a framework for engineering self-sustaining microbial consortia for biomaterials production and highlights opportunities for coupling metabolism with material synthesis in both extraterrestrial and terrestrial environments.

q-bio.CB

Screening of Fungi for the Application of Self-Healing Concrete

Concrete is susceptible to cracking owing to drying shrinkage, freeze-thaw cycles, delayed ettringite formation, reinforcement corrosion, creep and fatigue, etc. Since maintenance and inspection of concrete infrastructure require onerous labor and high costs, self-healing of harmful cracks without human interference or intervention could be of great attraction. The goal of this study is to explore a new self-healing approach in which fungi are used as a self-healing agent to promote calcium carbonate precipitation to fill the cracks in concrete structures. Recent research results in the field of geomycology have shown that many species of fungi could play an important role in promoting calcium carbonate mineralization, but their application in self-healing concrete has not been reported. Therefore, a screening of different species of fungi has been conducted in this study. Our results showed that, despite the drastic pH increase owing to the leaching of calcium hydroxide from concrete, Aspergillus nidulans (MAD1445), a pH regulatory mutant, could grow on concrete plates and promote calcium carbonate precipitation.

q-bio.OT

Interactions of Fungi with Concrete: Significant Importance for Bio-Based Self-Healing Concrete

The goal of this study is to explore a new self-healing concept in which fungi are used as a self-healing agent to promote calcium mineral precipitation to fill the cracks in concrete. An initial screening of different species of fungi has been conducted. Fungal growth medium was overlaid onto cured concrete plate. Mycelial discs were aseptically deposited at the plate center. The results showed that, due to the dissolving of Ca(OH)2 from concrete, the pH of the growth medium increased from its original value of 6.5 to 13.0. Despite the drastic pH increase, Trichoderma reesei (ATCC13631) spores germinated into hyphal mycelium and grew equally well with or without concrete. X-ray diffraction (XRD) and scanning electron microscope (SEM) confirmed that the crystals precipitated on the fungal hyphae were composed of calcite. These results indicate that T. reesei has great potential to be used in bio-based self-healing concrete for sustainable infrastructure.

q-bio.OT

Elastic, strength, and fracture properties of Marcellus shale

Shale, a fine-grained sedimentary rock, is the key source rock for many of the world's most important oil and natural gas deposits. A deep understanding of the mechanical properties of shale is of vital importance in various geotechnical applications, including oil and gas exploitation. In this work, deformability, strength, and fracturing properties of Marcellus shale were investigated through an experimental study. Firstly, uniaxial compression, direct tension, and Brazilian tests were performed on the Marcellus shale specimens in various bedding plane orientations with respect to loading directions to measure the static mechanical properties and their anisotropy. Furthermore, the deformability of Marcellus shale was also studied through seismic velocity measurements for comparison with the static measurements. The experimental results revealed that the transversely isotropic model is applicable for describing the elastic behaviors of Marcellus shale in pure tension and compression. The elastic properties measured from these two experiments, however, were not exactly the same. Strength results showed that differences exist between splitting (Brazilian) and direct tensile strengths, both of which varied with bedding plane orientations and loading directions and were associated with different failure modes. Finally, a series of three-point-bending tests were conducted on specimens of increasing size in three different principal notch orientations to investigate the fracture properties of the material. It was found that there exists a significant size effect on the fracture properties calculated from the measured peak loads and by using the Linear Elastic Fracture Mechanics (LEFM) theory. The fracture properties can be uniquely identified, however, by using Bazant's Size Effect Law and they were found to be anisotropic.

physics.geo-ph

A multiscale framework for the simulation of the anisotropic mechanical behavior of shale

Shale, like many other sedimentary rocks, is typically heterogeneous, anisotropic, and is characterized by partial alignment of anisotropic clay minerals and naturally formed bedding planes. In this study, a micromechanical framework based on the Lattice Discrete Particle Model (LDPM) is formulated to capture these features. Material anisotropy is introduced through an approximated geometric description of shale internal structure, which includes representation of material property variation with orientation and explicit modeling of parallel lamination. The model is calibrated by carrying out numerical simulations to match various experimental data, including the ones relevant to elastic properties, Brazilian tensile strength, and unconfined compressive strength. Furthermore, parametric study is performed to investigate the relationship between the mesoscale parameters and the macroscopic properties. It is shown that the dependence of the elastic stiffness, strength, and failure mode on loading orientation can be captured successfully. Finally, a homogenization approach based on the asymptotic expansion of field variables is applied to upscale the proposed micromechanical model, and the properties of the homogenized model are analyzed.

cond-mat.mtrl-sci

Elastic Microplane Formulation for Transversely Isotropic Materials

This contribution investigates the extension of the microplane formulation to the description of transversely isotropic materials such as shale rock, foams, unidirectional composites, and ceramics. Two possible approaches are considered: 1) the spectral decomposition of the stiffness tensor to define the microplane constitutive laws in terms of energetically orthogonal eigenstrains and eigenstresses; and 2) the definition of orientation-dependent microplane elastic moduli. It is shown that the first approach provides a rigorous way to tackle anisotropy within the microplane framework whereas the second approach represents an approximation which, however, makes the formulation of nonlinear constitutive equations much simpler. The efficacy of the second approach in modeling the macroscopic elastic behavior is compared to the thermodynamic restrictions of the anisotropic parameters showing that a significant range of elastic properties can be modeled with excellent accuracy. Further, it is shown that it provides a very good approximation of the microplane stresses provided by the first approach, with the advantage of a simpler formulation. It is concluded that the spectral stiffness decomposition represents the best approach in such cases as for modeling unidirectional composites, in which accurately capturing the elastic behavior is important. The introduction of orientation-dependent microplane elastic moduli provides a simpler framework for the modeling of transversely isotropic materials with remarked inelastic behavior, as in the case, for example, of shale rock.

cond-mat.mtrl-sci

A note on Lorentz-like transformations and superluminal motion

In this extended note a critical discussion of an extension of the Lorentz transformations for velocities faster than the speed of light given recently by Hill and Cox is provided. The presented approach reveals the connection between faster-than-light speeds and the issue of isotropy of space. It is shown if the relative speed between the two inertial frames $v$ is greater than the speed of light, the condition of isotropy of space cannot be retained. It further specifies the respective transformations applying to $-\infty<v<-c$ and $c<v<+\infty$. It is proved that such Lorentz-like transformations are improper transformations since the Jacobian is negative. As a consequence, the wave operator, the light-cone and the volume element are not invariant under such Lorentz-like transformations. Also it is shown that such Lorentz-like transformations are not new and already known in the literature.

gr-qc