arXiv subjects

Conor K. Trygstad

Publications and source records attributed to Conor K. Trygstad.

9 recordsLinked to original sources

arXiv2026

Model-Reference Adaptive Flight Control of a 95-mg Insect-Scale Flapping-Wing Aerial Robot

Due to the system's scale and complex fabrication, the model describing the dynamics of a flapping-wing insect-scale aerial robot is subject to parameter uncertainty; for example, in the inertia matrix and the actuator mapping of the flier. Furthermore, due to its low inertia, this type of robot is greatly affected by stochastic and systematic disturbances during flight, including power-wire tension, gusts, and undesired aerodynamic forces produced by wing misalignment. Therefore, the high-performance execution of complex maneuvers at the subdecigram scale requires the robot to adapt its behavior to counteract disturbances and model uncertainty. Toward this objective, we introduce a model-reference adaptive control (MRAC) architecture for high-performance position control of flapping-wing robotic insects that can be modeled as rigid bodies in the three-dimensional (3D) space. In addition, we demonstrate how the implementation of a hybrid multiplicative extended Kálmán filter for estimating current and desired angular velocities during flight significantly dampens attitude vibrations, especially along the roll and pitch degrees of freedom (DOFs), and also improves flight performance. To show the suitability, functionality, and high performance of the proposed approach, we conducted real-time hovering and trajectory-tracking 6-DOF flight control experiments with a 95-mg insect-scale aerial robot.

cs.RO↗

arXiv2026

An Autonomous Subgram SMA-Based Swimmer

We present the Swima, a bioinspired 900-mg swimmer propelled by two 10-mg high-work-density (HWD) actuators driven by shape-memory alloy (SMA) wires. We integrated onboard power and computation by using a custom-built printed circuit board (PCB) and an 11-mAh 3.7-V 507-mg single-cell lithium-ion (Li-Ion) battery, which in conjunction enable autonomous swimming in excess of 18 min. The Swima can swim at speeds of up to 22.4 mm/s (0.56 Bl/s), achieves turning rates of up to 14°/s, and can follow 0-degree heading reference trajectories with root mean square (RMS) values of tracking errors of about 6.5° across multiple tests. This robot is the first subgram microswimmer with onboard power, actuation, and computation developed to date.

cs.RO↗

arXiv2025

Force Characterization of Insect-Scale Aquatic Propulsion Based on Fluid-Structure Interaction

We present force characterizations of two newly developed insect-scale propulsors--one single-tailed and one double-tailed--for microrobotic swimmers that leverage fluid-structure interaction (FSI) to generate thrust. The designs of these two devices were inspired by anguilliform swimming and are driven by soft tails excited by high-work-density (HWD) actuators powered by shape-memory alloy (SMA) wires. While these propulsors have been demonstrated to be suitable for microrobotic aquatic locomotion and controllable with simple architectures for trajectory tracking in the two-dimensional (2D) space, the characteristics and magnitudes of the associated forces have not been studied systematically. In the research presented here, we adopted a theoretical framework based on the notion of reactive forces and obtained experimental data for characterization using a custom-built micro-N-resolution force sensor. We measured maximum and cycle-averaged force values with multi-test means of respectively 0.45 mN and 2.97 micro-N, for the tested single-tail propulsor. For the dual-tail propulsor, we measured maximum and cycle-averaged force values with multi-test means of 0.61 mN and 22.6 micro-N, respectively. These results represent the first measurements of the instantaneous thrust generated by insect-scale propulsors of this type and provide insights into FSI for efficient microrobotic propulsion.

cs.RO↗

arXiv2025

Feedback Control of a Single-Tail Bioinspired 59-mg Swimmer

We present an evolved steerable version of the single-tail Fish-&-Ribbon-Inspired Small Swimming Harmonic roBot (FRISSHBot), a 59-mg biologically inspired swimmer, which is driven by a new shape-memory alloy (SMA)-based bimorph actuator. The new FRISSHBot is controllable in the two-dimensional (2D) space, which enabled the first demonstration of feedback-controlled trajectory tracking of a single-tail aquatic robot with onboard actuation at the subgram scale. These new capabilities are the result of a physics-informed design with an enlarged head and shortened tail relative to those of the original platform. Enhanced by its design, this new platform achieves forward swimming speeds of up to 13.6 mm/s (0.38 Bl/s), which is over four times that of the original platform. Furthermore, when following 2D references in closed loop, the tested FRISSHBot prototype attains forward swimming speeds of up to 9.1 mm/s, root-mean-square (RMS) tracking errors as low as 2.6 mm, turning rates of up to 13.1 °/s, and turning radii as small as 10 mm.

cs.RO↗

arXiv2025

Power-Efficient Actuation for Insect-Scale Autonomous Underwater Vehicles

We present a new evolution of the Very Little Eel-Inspired roBot, the VLEIBot++, a 900-mg swimmer driven by two 10-mg bare high-work density (HWD) actuators, whose functionality is based on the use of shape-memory alloy (SMA) wires. An actuator of this type consumes an average power of about 40 mW during in-air operation. We integrated onboard power and computation into the VLEIBot++ using a custom-built printed circuit board (PCB) and an 11-mAh 3.7-V 507-mg single-cell lithium-ion (Li-Ion) battery, which in conjunction enable autonomous swimming for about 20 min on a single charge. This robot can swim at speeds of up to 18.7 mm/s (0.46 Bl/s) and is the first subgram microswimmer with onboard power, actuation, and computation developed to date. Unfortunately, the approach employed to actuate VLEIBot++ prototypes is infeasible for underwater applications because a typical 10-mg bare SMA-based microactuator requires an average power on the order of 800 mW when operating underwater. To address this issue, we introduce a new 13-mg power-efficient high-performance SMA-based microactuator that can function with similar power requirements (approx. 80 mW on average) and actuation performance (approx. 3 mm at low frequencies) in air and water. This design is based on the use of a sealed flexible air-capsule that encloses the SMA wires that drive the microactuator with the purpose of passively controlling the heat-transfer rate of the thermal system. Furthermore, this new power-efficient encapsulated actuator requires low voltages of excitation (3 to 4 V) and simple power electronics to function. The breakthroughs presented in this paper represent a path towards the creation of insect-scale autonomous underwater vehicles (AUVs).

cs.RO↗

arXiv2024

A New 10-mg SMA-Based Fast Bimorph Actuator for Microrobotics

We present a new millimeter-scale bimorph actuator for microrobotic applications, driven by feedforward controlled shape-memory alloy (SMA) wires. The device weighs 10 mg, measures 14 mm in length, and occupies a volume of 4.8 mm3, which makes it the lightest and smallest fully functional SMA-based bimorph actuator for microrobotics developed to date. The experimentally measured operational bandwidth is on the order of 20 Hz, and the unimorph and bimorph maximum low-frequency displacement outputs are on the order of 3.5 and 7 mm, respectively. To test and demonstrate the functionality and suitability of the actuator for microrobotics, we developed the Fish-&-Ribbon-Inspired Small Swimming Harmonic roBot (FRISSHBot). Loosely inspired by carangiformes, the FRISSHBot leverages fluid-structure interaction (FSI) phenomena to propel itself forward, weighs 30 mg, measures 34 mm in length, operates at frequencies of up to 4 Hz, and swims at speeds of up to 3.06 mm/s (0.09 Bl/s). This robot is the lightest and smallest swimmer with onboard actuation developed to date.

cs.RO↗

arXiv2024

Progress Towards Submersible Microrobots: A Novel 13-mg Low-Power SMA-Based Actuator for Underwater Propulsion

We introduce a new low-power 13-mg microactuator driven by shape-memory alloy (SMA) wires for underwater operation. The development of this device was motivated by the recent creation of microswimmers such as the FRISHBot, WaterStrider, VLEIBot, VLEIBot+, and VLEIBot++. The first four of these robots, ranging from 30 to 90 mg, function tethered to an electrical power supply while the last platform is an 810-mg fully autonomous system. These five robots are driven by dry SMA-based microactuators first developed for microrobotic crawlers such as the SMALLBug and SMARTI. As shown in this abstract, dry SMA-based actuators do not operate efficiently under water due to high heat-transfer rates in this medium; for example, the actuators that drive the VLEIBot++ require about 40 mW of average power at 1 Hz in dry air while requiring about 900 mW of average power at 1 Hz in water. In contrast, the microactuator presented in this abstract consumes about 150 mW of average power at 1 Hz in both dry air and water; additionally, it can be excited directly using an onboard battery through simple power electronics implemented on a custom-built printed circuit board (PCB). This technological breakthrough was enabled by the integration of a soft structure that encapsulates the SMA wires that drive the actuator in order to passively control the rates of heat transfer. The results presented here represent preliminary, yet compelling, experimental evidence that the proposed actuation approach will enable the development of fully autonomous and controllable submersible microswimmers. To accomplish this objective, we will evolve the current version of the VLEIBot++ and introduce new bioinspired underwater propulsion mechanisms.

cs.RO↗

arXiv2024

VLEIBot: A New 45-mg Swimming Microrobot Driven by a Bioinspired Anguilliform Propulsor

This paper presents the VLEIBot^* (Very Little Eel-Inspired roBot), a 45-mg/23-mm^3 microrobotic swimmer that is propelled by a bioinspired anguilliform propulsor. The propulsor is excited by a single 6-mg high-work-density (HWD) microactuator and undulates periodically due to wave propagation phenomena generated by fluid-structure interaction (FSI) during swimming. The microactuator is composed of a carbon-fiber beam, which functions as a leaf spring, and shape-memory alloy (SMA) wires, which deform cyclically when excited periodically using Joule heating. The VLEIBot can swim at speeds as high as 15.1mm * s^{-1} (0.33 Bl * s^{-1}}) when driven with a heuristically-optimized propulsor. To improve maneuverability, we evolved the VLEIBot design into the 90-mg/47-mm^3 VLEIBot^+, which is driven by two propulsors and fully controllable in the two-dimensional (2D) space. The VLEIBot^+ can swim at speeds as high as 16.1mm * s^{-1} (0.35 Bl * s^{-1}), when driven with heuristically-optimized propulsors, and achieves turning rates as high as 0.28 rad * s^{-1}, when tracking path references. The measured root-mean-square (RMS) values of the tracking errors are as low as 4 mm.

eess.SY↗

arXiv2023

A New 1-mg Fast Unimorph SMA-Based Actuator for Microrobotics

We present a new unimorph actuator for micro-robotics, which is driven by thin shape-memory alloy (SMA) wires. Using a passive-capillary-alignment technique and existing SMA-microsystem fabrication methods, we developed an actuator that is 7 mm long, has a volume of 0.45 mm^3, weighs 0.96 mg, and can achieve operation frequencies of up to 40 Hz as well as lift 155 times its own weight. To demonstrate the capabilities of the proposed actuator, we created an 8-mg crawler, the MiniBug, and a bioinspired 56-mg controllable water-surface-tension crawler, the WaterStrider. The MiniBug is 8.5 mm long, can locomote at speeds as high as 0.76 BL/s (body-lengths per second), and is the lightest fully-functional crawling microrobot of its type ever created. The WaterStrider is 22 mm long, and can locomote at speeds of up to 0.28 BL/s as well as execute turning maneuvers at angular rates on the order of 0.144 rad/s. The WaterStrider is the lightest controllable SMA-driven water-surface-tension crawler developed to date.

cs.RO↗